include/configs/pengwyn.h

   1 /*
   2  * pengwyn.h
   3  *
   4  * Copyright (C) 2013 Lothar Felten <lothar.felten@gmail.com>
   5  *
   6  * based on am335x_evm.h, Copyright (C) 2011 Texas Instruments Inc.
   7  *
   8  * SPDX-License-Identifier:     GPL-2.0+
   9  */
  10
  11 #ifndef __CONFIG_PENGWYN_H
  12 #define __CONFIG_PENGWYN_H
  13
  14 #define CONFIG_NAND
  15 #define CONFIG_SERIAL1
  16 #define CONFIG_CONS_INDEX               1
  17
  18 #include <configs/ti_am335x_common.h>
  19
  20 /* Clock Defines */
  21 #define V_OSCK                          24000000
  22 #define V_SCLK                          V_OSCK
  23
  24 /* set env size */
  25 #define CONFIG_ENV_SIZE                 0x4000
  26
  27 #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
  28
  29 #ifndef CONFIG_SPL_BUILD
  30 #define CONFIG_EXTRA_ENV_SETTINGS \
  31         "loadaddr=0x80200000\0" \
  32         "fdtaddr=0x80F80000\0" \
  33         "bootpart=0:2\0" \
  34         "bootdir=/boot\0" \
  35         "bootfile=zImage\0" \
  36         "fdtfile=am335x-pengwyn.dtb\0" \
  37         "console=ttyO0,115200n8\0" \
  38         "optargs=\0" \
  39         "mmcdev=0\0" \
  40         "mmcroot=/dev/mmcblk0p2 ro\0" \
  41         "mmcrootfstype=ext4 rootwait\0" \
  42         "rootpath=/export/rootfs\0" \
  43         "nfsopts=nolock\0" \
  44         "static_ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}" \
  45                 "::off\0" \
  46         "mmcargs=setenv bootargs console=${console} " \
  47                 "${optargs} " \
  48                 "root=${mmcroot} " \
  49                 "rootfstype=${mmcrootfstype}\0" \
  50         "netargs=setenv bootargs console=${console} " \
  51                 "${optargs} " \
  52                 "root=/dev/nfs " \
  53                 "nfsroot=${serverip}:${rootpath},${nfsopts} rw " \
  54                 "ip=dhcp\0" \
  55         "bootenv=uEnv.txt\0" \
  56         "loadbootenv=load mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \
  57         "importbootenv=echo Importing environment from mmc ...; " \
  58                 "env import -t $loadaddr $filesize\0" \
  59         "loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
  60         "loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \
  61         "mmcloados=run mmcargs; " \
  62                 "bootz ${loadaddr} - ${fdtaddr};\0" \
  63         "mmcboot=mmc dev ${mmcdev}; " \
  64                 "if mmc rescan; then " \
  65                         "echo SD/MMC found on device ${mmcdev};" \
  66                         "if run loadbootenv; then " \
  67                                 "echo Loaded environment from ${bootenv};" \
  68                                 "run importbootenv;" \
  69                         "fi;" \
  70                         "if test -n $uenvcmd; then " \
  71                                 "echo Running uenvcmd ...;" \
  72                                 "run uenvcmd;" \
  73                         "fi;" \
  74                         "if run loadimage; then " \
  75                                 "run loadfdt;" \
  76                                 "run mmcloados;" \
  77                         "fi;" \
  78                 "fi;\0" \
  79         "netboot=echo Booting from network ...; " \
  80                 "setenv autoload no; " \
  81                 "dhcp; " \
  82                 "tftp ${loadaddr} ${bootfile}; " \
  83                 "tftp ${fdtaddr} ${fdtfile}; " \
  84                 "run netargs; " \
  85                 "bootz ${loadaddr} - ${fdtaddr}\0" \
  86         "mtdids=" MTDIDS_DEFAULT "\0" \
  87         "mtdparts=" MTDPARTS_DEFAULT "\0" \
  88         "nandargs=setenv bootargs console=${console} " \
  89                 "${optargs} " \
  90                 "root=${nandroot} " \
  91                 "rootfstype=${nandrootfstype}\0" \
  92         "nandroot=ubi0:rootfs rw ubi.mtd=7,2048\0" \
  93         "nandrootfstype=ubifs rootwait=1\0" \
  94         "nandboot=echo Booting from nand ...; " \
  95                 "run nandargs; " \
  96                 "nand read ${fdtaddr} u-boot-spl-os; " \
  97                 "nand read ${loadaddr} kernel; " \
  98                 "bootz ${loadaddr} - ${fdtaddr}\0"
  99 #endif
 100
 101 #define CONFIG_BOOTCOMMAND \
 102         "run mmcboot;" \
 103         "run nandboot;"
 104
 105 /* NS16550 Configuration: primary UART via FTDI */
 106 #define CONFIG_SYS_NS16550_COM1         0x44e09000
 107
 108 /* I2C Configuration */
 109 #define CONFIG_SYS_I2C_SPEED            100000
 110 #define CONFIG_ENV_EEPROM_IS_ON_I2C
 111 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x50
 112 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  2
 113
 114 /* SPL */
 115
 116 /* NAND support */
 117 #define CONFIG_CMD_NAND
 118 #define CONFIG_NAND_OMAP_GPMC
 119 #define CONFIG_NAND_OMAP_ELM
 120
 121 /* NAND Configuration. */
 122 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 123 #define CONFIG_SYS_NAND_PAGE_COUNT      (CONFIG_SYS_NAND_BLOCK_SIZE / \
 124                                          CONFIG_SYS_NAND_PAGE_SIZE)
 125 #define CONFIG_SYS_NAND_PAGE_SIZE       4096
 126 #define CONFIG_SYS_NAND_OOBSIZE         224
 127 #define CONFIG_SYS_NAND_ONFI_DETECTION
 128 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128*4096)
 129 #define CONFIG_SYS_NAND_BAD_BLOCK_POS   NAND_LARGE_BADBLOCK_POS
 130 #define CONFIG_SYS_NAND_ECCPOS          {   2,   3,   4,   5,   6,   7,   8,   9,  10,  11,  12,  13,  14,  15,  16,  17,\
 131                                            18,  19,  20,  21,  22,  23,  24,  25,  26,  27,  28,  29,  30,  31,  32,  33,\
 132                                            34,  35,  36,  37,  38,  39,  40,  41,  42,  43,  44,  45,  46,  47,  48,  49,\
 133                                            50,  51,  52,  53,  54,  55,  56,  57,  58,  59,  60,  61,  62,  63,  64,  65,\
 134                                            66,  67,  68,  69,  70,  71,  72,  73,  74,  75,  76,  77,  78,  79,  80,  81,\
 135                                            82,  83,  84,  85,  86,  87,  88,  89,  90,  91,  92,  93,  94,  95,  96,  97,\
 136                                            98,  99, 100, 101, 102, 103, 104, 105, 106, 107, 108, 109, 110, 111, 112, 113,\
 137                                           114, 115, 116, 117, 118, 119, 120, 121, 122, 123, 124, 125, 126, 127, 128, 129, 130, 131, 132, 133,\
 138                                           134, 135, 136, 137, 138, 139, 140, 141, 142, 143, 144, 145, 146, 147, 148, 149, 150, 151, 152, 153,\
 139                                           154, 155, 156, 157, 158, 159, 160, 161, 162, 163, 164, 165, 166, 167, 168, 169, 170, 171, 172, 173,\
 140                                           174, 175, 176, 177, 178, 179, 180, 181, 182, 183, 184, 185, 186, 187, 188, 189, 190, 191, 192, 193,\
 141                                           194, 195, 196, 197, 198, 199, 200, 201, 202, 203, 204, 205, 206, 207, 208, 209}
 142
 143 #define CONFIG_SYS_NAND_ECCSIZE         512
 144 #define CONFIG_SYS_NAND_ECCBYTES        26
 145 #define CONFIG_SYS_NAND_ECCSTEPS        8
 146 #define CONFIG_SYS_NAND_ECCTOTAL        (CONFIG_SYS_NAND_ECCBYTES * \
 147                                                 CONFIG_SYS_NAND_ECCSTEPS)
 148 #define CONFIG_NAND_OMAP_ECCSCHEME      OMAP_ECC_BCH16_CODE_HW
 149 /* END NAND Configuration. */
 150
 151 #define CONFIG_SYS_NAND_U_BOOT_START    CONFIG_SYS_TEXT_BASE
 152 /* #define CONFIG_SYS_NAND_U_BOOT_OFFS  0x80000 */
 153 #define CONFIG_SYS_NAND_U_BOOT_OFFS     0x200000
 154
 155 #define MTDIDS_DEFAULT                  "nand0=omap2-nand.0"
 156 /* Size must be a multiple of Nand erase size (524288 b) */
 157 #define MTDPARTS_DEFAULT                "mtdparts=omap2-nand.0:512k(SPL)," \
 158                                         "512k(SPL.backup1)," \
 159                                         "512k(SPL.backup2)," \
 160                                         "512k(SPL.backup3),1536k(u-boot)," \
 161                                         "512k(u-boot-spl-os)," \
 162                                         "512k(u-boot-env),5m(kernel),-(rootfs)"
 163 #define CONFIG_ENV_OFFSET               0x260000 /* environment starts here */
 164 #define CONFIG_SYS_ENV_SECT_SIZE        (128 << 10)     /* 128 KiB */
 165 /* NAND: SPL falcon mode configs */
 166 #ifdef CONFIG_SPL_OS_BOOT
 167 #define CONFIG_CMD_SPL_NAND_OFS         0x240000 /* un-assigned */
 168 #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x280000
 169 #define CONFIG_CMD_SPL_WRITE_SIZE       0x2000
 170 #endif
 171
 172 /*
 173  * USB configuration.  We enable MUSB support, both for host and for
 174  * gadget.  We set USB0 as peripheral and USB1 as host, based on the
 175  * board schematic and physical port wired to each.  Then for host we
 176  * add mass storage support.
 177  */
 178 #define CONFIG_USB_MUSB_DSPS
 179 #define CONFIG_USB_MUSB_PIO_ONLY
 180 #define CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT
 181 #define CONFIG_AM335X_USB0
 182 #define CONFIG_AM335X_USB0_MODE MUSB_PERIPHERAL
 183 #define CONFIG_AM335X_USB1
 184 #define CONFIG_AM335X_USB1_MODE MUSB_HOST
 185
 186 #if defined(CONFIG_SPL_BUILD)
 187 /* disable host part of MUSB in SPL */
 188 /* Disable CPSW SPL support so we fit within the 101KiB limit. */
 189 #endif
 190
 191 /* CPSW ethernet */
 192 #define CONFIG_NET_MULTI
 193
 194 /* Network */
 195 #define CONFIG_PHYLIB
 196 #define CONFIG_PHY_RESET        1
 197 #define CONFIG_PHY_NATSEMI
 198 #define CONFIG_PHY_REALTEK
 199
 200 /* CPSW support */
 201
 202 #define CONFIG_SPL_LDSCRIPT             "arch/arm/mach-omap2/u-boot-spl.lds"
 203
 204 #endif  /* ! __CONFIG_PENGWYN_H */