include/configs/pico-imx6ul.h

   1 /*
   2  * Copyright (C) 2015 Technexion Ltd.
   3  *
   4  * Configuration settings for the Technexion PICO-IMX6UL-EMMC board.
   5  *
   6  * SPDX-License-Identifier:     GPL-2.0+
   7  */
   8 #ifndef __PICO_IMX6UL_CONFIG_H
   9 #define __PICO_IMX6UL_CONFIG_H
  10
  11
  12 #include <asm/arch/imx-regs.h>
  13 #include <linux/sizes.h>
  14 #include "mx6_common.h"
  15 #include <asm/imx-common/gpio.h>
  16
  17 #define CONFIG_DISPLAY_BOARDINFO
  18
  19 /* Network support */
  20
  21 #define CONFIG_FEC_MXC
  22 #define CONFIG_MII
  23 #define IMX_FEC_BASE                    ENET2_BASE_ADDR
  24 #define CONFIG_FEC_MXC_PHYADDR          0x1
  25 #define CONFIG_FEC_XCV_TYPE             RMII
  26 #define CONFIG_PHYLIB
  27 #define CONFIG_PHY_MICREL
  28
  29 /* Size of malloc() pool */
  30 #define CONFIG_SYS_MALLOC_LEN           (35 * SZ_1M) /* Increase due to DFU */
  31
  32 #define CONFIG_BOARD_EARLY_INIT_F
  33
  34 #define CONFIG_MXC_UART
  35 #define CONFIG_MXC_UART_BASE            UART6_BASE_ADDR
  36
  37 /* MMC Configs */
  38 #define CONFIG_FSL_USDHC
  39 #define CONFIG_FSL_ESDHC
  40 #define CONFIG_SYS_FSL_ESDHC_ADDR       USDHC1_BASE_ADDR
  41
  42 #define CONFIG_MMC
  43 #define CONFIG_GENERIC_MMC
  44 #define CONFIG_DOS_PARTITION
  45 #define CONFIG_SUPPORT_EMMC_BOOT
  46
  47 /* USB Configs */
  48 #define CONFIG_USB_EHCI
  49 #define CONFIG_USB_EHCI_MX6
  50 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
  51 #define CONFIG_MXC_USB_PORTSC           (PORT_PTS_UTMI | PORT_PTS_PTW)
  52 #define CONFIG_MXC_USB_FLAGS            0
  53 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
  54
  55 #define CONFIG_USBD_HS
  56
  57 #define CONFIG_USB_FUNCTION_MASS_STORAGE
  58 #define CONFIG_USB_GADGET_VBUS_DRAW     2
  59
  60 #define CONFIG_SYS_DFU_DATA_BUF_SIZE SZ_16M
  61 #define DFU_DEFAULT_POLL_TIMEOUT 300
  62
  63 #define CONFIG_DEFAULT_FDT_FILE         "imx6ul-pico-hobbit.dtb"
  64
  65 #define CONFIG_SYS_MMC_IMG_LOAD_PART    1
  66
  67 #define CONFIG_EXTRA_ENV_SETTINGS \
  68         "image=zImage\0" \
  69         "console=ttymxc5\0" \
  70         "fdt_high=0xffffffff\0" \
  71         "initrd_high=0xffffffff\0" \
  72         "fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
  73         "fdt_addr=0x83000000\0" \
  74         "mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \
  75         "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
  76         "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
  77         "mmcautodetect=yes\0" \
  78         "dfu_alt_info=boot raw 0x2 0x400 mmcpart 1\0" \
  79         "mmcargs=setenv bootargs console=${console},${baudrate} " \
  80                 "root=${mmcroot}\0" \
  81         "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
  82         "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
  83         "mmcboot=echo Booting from mmc ...; " \
  84                 "run mmcargs; " \
  85                 "if run loadfdt; then " \
  86                         "bootz ${loadaddr} - ${fdt_addr}; " \
  87                 "else " \
  88                         "echo WARN: Cannot load the DT; " \
  89                 "fi;\0" \
  90         "netargs=setenv bootargs console=${console},${baudrate} " \
  91                 "root=/dev/nfs " \
  92         "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
  93                 "netboot=echo Booting from net ...; " \
  94                 "run netargs; " \
  95                 "if test ${ip_dyn} = yes; then " \
  96                         "setenv get_cmd dhcp; " \
  97                 "else " \
  98                         "setenv get_cmd tftp; " \
  99                 "fi; " \
 100                 "${get_cmd} ${image}; " \
 101                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 102                         "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
 103                                 "bootz ${loadaddr} - ${fdt_addr}; " \
 104                         "else " \
 105                                 "if test ${boot_fdt} = try; then " \
 106                                         "bootz; " \
 107                                 "else " \
 108                                         "echo WARN: Cannot load the DT; " \
 109                                 "fi; " \
 110                         "fi; " \
 111                 "else " \
 112                         "bootz; " \
 113                 "fi;\0" \
 114
 115 #define CONFIG_BOOTCOMMAND \
 116            "if mmc rescan; then " \
 117                    "if run loadimage; then " \
 118                            "run mmcboot; " \
 119                    "else run netboot; " \
 120                    "fi; " \
 121            "else run netboot; fi"
 122
 123 #define CONFIG_SYS_MEMTEST_START        0x80000000
 124 #define CONFIG_SYS_MEMTEST_END          CONFIG_SYS_MEMTEST_START + SZ_128M
 125
 126 #define CONFIG_SYS_LOAD_ADDR            CONFIG_LOADADDR
 127 #define CONFIG_SYS_HZ                   1000
 128
 129 #define CONFIG_CMDLINE_EDITING
 130 #define CONFIG_STACKSIZE                SZ_128K
 131
 132 /* Physical Memory Map */
 133 #define CONFIG_NR_DRAM_BANKS            1
 134 #define PHYS_SDRAM                      MMDC0_ARB_BASE_ADDR
 135
 136 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
 137 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
 138 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
 139
 140 #define CONFIG_SYS_INIT_SP_OFFSET \
 141         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 142 #define CONFIG_SYS_INIT_SP_ADDR \
 143         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 144
 145 /* I2C configs */
 146 #define CONFIG_SYS_I2C
 147 #define CONFIG_SYS_I2C_MXC
 148 #define CONFIG_SYS_I2C_MXC_I2C1
 149 #define CONFIG_SYS_I2C_SPEED            100000
 150
 151 /* PMIC */
 152 #define CONFIG_POWER
 153 #define CONFIG_POWER_I2C
 154 #define CONFIG_POWER_PFUZE3000
 155 #define CONFIG_POWER_PFUZE3000_I2C_ADDR 0x08
 156
 157 /* FLASH and environment organization */
 158 #define CONFIG_SYS_NO_FLASH
 159
 160 #define CONFIG_ENV_SIZE                 SZ_8K
 161 #define CONFIG_ENV_IS_IN_MMC
 162 #define CONFIG_ENV_OFFSET               (8 * SZ_64K)
 163
 164 #define CONFIG_SYS_MMC_ENV_DEV          0
 165 #define CONFIG_SYS_MMC_ENV_PART         0
 166 #define CONFIG_MMCROOT                  "/dev/mmcblk0p2"
 167
 168 #endif /* __PICO_IMX6UL_CONFIG_H */