include/configs/pico-imx6ul.h

   1 /*
   2  * Copyright (C) 2015 Technexion Ltd.
   3  *
   4  * Configuration settings for the Technexion PICO-IMX6UL-EMMC board.
   5  *
   6  * SPDX-License-Identifier:     GPL-2.0+
   7  */
   8 #ifndef __PICO_IMX6UL_CONFIG_H
   9 #define __PICO_IMX6UL_CONFIG_H
  10
  11
  12 #include <asm/arch/imx-regs.h>
  13 #include <linux/sizes.h>
  14 #include "mx6_common.h"
  15 #include <asm/imx-common/gpio.h>
  16
  17 #define CONFIG_DISPLAY_CPUINFO
  18 #define CONFIG_DISPLAY_BOARDINFO
  19
  20 /* Network support */
  21
  22 #define CONFIG_FEC_MXC
  23 #define CONFIG_MII
  24 #define IMX_FEC_BASE                    ENET2_BASE_ADDR
  25 #define CONFIG_FEC_MXC_PHYADDR          0x1
  26 #define CONFIG_FEC_XCV_TYPE             RMII
  27 #define CONFIG_PHYLIB
  28 #define CONFIG_PHY_MICREL
  29
  30 /* Size of malloc() pool */
  31 #define CONFIG_SYS_MALLOC_LEN           (35 * SZ_1M) /* Increase due to DFU */
  32
  33 #define CONFIG_BOARD_EARLY_INIT_F
  34
  35 #define CONFIG_MXC_UART
  36 #define CONFIG_MXC_UART_BASE            UART6_BASE_ADDR
  37
  38 /* MMC Configs */
  39 #define CONFIG_FSL_USDHC
  40 #define CONFIG_FSL_ESDHC
  41 #define CONFIG_SYS_FSL_ESDHC_ADDR       USDHC1_BASE_ADDR
  42
  43 #define CONFIG_MMC
  44 #define CONFIG_GENERIC_MMC
  45 #define CONFIG_DOS_PARTITION
  46 #define CONFIG_SUPPORT_EMMC_BOOT
  47
  48 /* USB Configs */
  49 #define CONFIG_USB_EHCI
  50 #define CONFIG_USB_EHCI_MX6
  51 #define CONFIG_USB_STORAGE
  52 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
  53 #define CONFIG_MXC_USB_PORTSC           (PORT_PTS_UTMI | PORT_PTS_PTW)
  54 #define CONFIG_MXC_USB_FLAGS            0
  55 #define CONFIG_USB_MAX_CONTROLLER_COUNT 1 /* Only OTG1 port enabled */
  56
  57 #define CONFIG_CI_UDC
  58 #define CONFIG_USBD_HS
  59 #define CONFIG_USB_GADGET_DUALSPEED
  60 #define CONFIG_USB_GADGET
  61
  62 #define CONFIG_USB_FUNCTION_MASS_STORAGE
  63 #define CONFIG_USB_GADGET_DOWNLOAD
  64 #define CONFIG_USB_GADGET_VBUS_DRAW     2
  65
  66 #define CONFIG_USB_FUNCTION_DFU
  67 #define CONFIG_DFU_MMC
  68 #define CONFIG_SYS_DFU_DATA_BUF_SIZE SZ_16M
  69 #define DFU_DEFAULT_POLL_TIMEOUT 300
  70
  71 #define CONFIG_G_DNL_VENDOR_NUM         0x0525
  72 #define CONFIG_G_DNL_PRODUCT_NUM        0xa4a5
  73 #define CONFIG_G_DNL_MANUFACTURER       "FSL"
  74
  75 #define CONFIG_G_DNL_VENDOR_NUM         0x0525
  76 #define CONFIG_G_DNL_PRODUCT_NUM        0xa4a5
  77 #define CONFIG_G_DNL_MANUFACTURER       "FSL"
  78
  79 #define CONFIG_DEFAULT_FDT_FILE         "imx6ul-pico-hobbit.dtb"
  80
  81 #define CONFIG_SYS_MMC_IMG_LOAD_PART    1
  82
  83 #define CONFIG_EXTRA_ENV_SETTINGS \
  84         "image=zImage\0" \
  85         "console=ttymxc5\0" \
  86         "fdt_high=0xffffffff\0" \
  87         "initrd_high=0xffffffff\0" \
  88         "fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
  89         "fdt_addr=0x83000000\0" \
  90         "mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \
  91         "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
  92         "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
  93         "mmcautodetect=yes\0" \
  94         "dfu_alt_info=boot raw 0x2 0x400 mmcpart 1\0" \
  95         "mmcargs=setenv bootargs console=${console},${baudrate} " \
  96                 "root=${mmcroot}\0" \
  97         "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
  98         "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
  99         "mmcboot=echo Booting from mmc ...; " \
 100                 "run mmcargs; " \
 101                 "if run loadfdt; then " \
 102                         "bootz ${loadaddr} - ${fdt_addr}; " \
 103                 "else " \
 104                         "echo WARN: Cannot load the DT; " \
 105                 "fi;\0" \
 106         "netargs=setenv bootargs console=${console},${baudrate} " \
 107                 "root=/dev/nfs " \
 108         "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
 109                 "netboot=echo Booting from net ...; " \
 110                 "run netargs; " \
 111                 "if test ${ip_dyn} = yes; then " \
 112                         "setenv get_cmd dhcp; " \
 113                 "else " \
 114                         "setenv get_cmd tftp; " \
 115                 "fi; " \
 116                 "${get_cmd} ${image}; " \
 117                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 118                         "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
 119                                 "bootz ${loadaddr} - ${fdt_addr}; " \
 120                         "else " \
 121                                 "if test ${boot_fdt} = try; then " \
 122                                         "bootz; " \
 123                                 "else " \
 124                                         "echo WARN: Cannot load the DT; " \
 125                                 "fi; " \
 126                         "fi; " \
 127                 "else " \
 128                         "bootz; " \
 129                 "fi;\0" \
 130
 131 #define CONFIG_BOOTCOMMAND \
 132            "if mmc rescan; then " \
 133                    "if run loadimage; then " \
 134                            "run mmcboot; " \
 135                    "else run netboot; " \
 136                    "fi; " \
 137            "else run netboot; fi"
 138
 139 #define CONFIG_SYS_MEMTEST_START        0x80000000
 140 #define CONFIG_SYS_MEMTEST_END          CONFIG_SYS_MEMTEST_START + SZ_128M
 141
 142 #define CONFIG_SYS_LOAD_ADDR            CONFIG_LOADADDR
 143 #define CONFIG_SYS_HZ                   1000
 144
 145 #define CONFIG_CMDLINE_EDITING
 146 #define CONFIG_STACKSIZE                SZ_128K
 147
 148 /* Physical Memory Map */
 149 #define CONFIG_NR_DRAM_BANKS            1
 150 #define PHYS_SDRAM                      MMDC0_ARB_BASE_ADDR
 151
 152 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
 153 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
 154 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
 155
 156 #define CONFIG_SYS_INIT_SP_OFFSET \
 157         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 158 #define CONFIG_SYS_INIT_SP_ADDR \
 159         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 160
 161 /* FLASH and environment organization */
 162 #define CONFIG_SYS_NO_FLASH
 163
 164 #define CONFIG_ENV_SIZE                 SZ_8K
 165 #define CONFIG_ENV_IS_IN_MMC
 166 #define CONFIG_ENV_OFFSET               (8 * SZ_64K)
 167
 168 #define CONFIG_SYS_MMC_ENV_DEV          0
 169 #define CONFIG_SYS_MMC_ENV_PART         0
 170 #define CONFIG_MMCROOT                  "/dev/mmcblk0p2"
 171
 172 #endif /* __PICO_IMX6UL_CONFIG_H */