include/configs/pm9261.h

   1 /*
   2  * (C) Copyright 2007-2008
   3  * Stelian Pop <stelian.pop@leadtechdesign.com>
   4  * Lead Tech Design <www.leadtechdesign.com>
   5  * Ilko Iliev <www.ronetix.at>
   6  *
   7  * Configuation settings for the RONETIX PM9261 board.
   8  *
   9  * See file CREDITS for list of people who contributed to this
  10  * project.
  11  *
  12  * This program is free software; you can redistribute it and/or
  13  * modify it under the terms of the GNU General Public License as
  14  * published by the Free Software Foundation; either version 2 of
  15  * the License, or (at your option) any later version.
  16  *
  17  * This program is distributed in the hope that it will be useful,
  18  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  19  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  20  * GNU General Public License for more details.
  21  *
  22  * You should have received a copy of the GNU General Public License
  23  * along with this program; if not, write to the Free Software
  24  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  25  * MA 02111-1307 USA
  26  */
  27
  28 #ifndef __CONFIG_H
  29 #define __CONFIG_H
  30
  31 #define CONFIG_AT91_LEGACY
  32
  33 /* ARM asynchronous clock */
  34 #define AT91_CPU_NAME           "AT91SAM9261"
  35
  36 #define CONFIG_DISPLAY_BOARDINFO
  37
  38 #define MASTER_PLL_DIV          15
  39 #define MASTER_PLL_MUL          162
  40 #define MAIN_PLL_DIV            2
  41 #define AT91_MAIN_CLOCK         18432000
  42
  43 #define CONFIG_SYS_HZ           1000
  44
  45 #define CONFIG_ARM926EJS        1       /* This is an ARM926EJS Core    */
  46 #define CONFIG_AT91SAM9261      1       /* It's an Atmel AT91SAM9261 SoC*/
  47 #define CONFIG_PM9261           1       /* on a Ronetix PM9261 Board    */
  48 #define CONFIG_ARCH_CPU_INIT
  49 #undef CONFIG_USE_IRQ                   /* we don't need IRQ/FIQ stuff  */
  50
  51 /* clocks */
  52 /* CKGR_MOR - enable main osc. */
  53 #define CONFIG_SYS_MOR_VAL                                              \
  54                 (AT91_PMC_MOSCEN |                                      \
  55                  (255 << 8))            /* Main Oscillator Start-up Time */
  56 #define CONFIG_SYS_PLLAR_VAL                                            \
  57                 (AT91_PMC_PLLA_WR_ERRATA | /* Bit 29 must be 1 when prog */ \
  58                  AT91_PMC_OUT |                                         \
  59                  ((MASTER_PLL_MUL - 1) << 16) | (MASTER_PLL_DIV))
  60
  61 /* PCK/2 = MCK Master Clock from PLLA */
  62 #define CONFIG_SYS_MCKR1_VAL            \
  63                 (AT91_PMC_CSS_SLOW |    \
  64                  AT91_PMC_PRES_1 |      \
  65                  AT91SAM9_PMC_MDIV_2 |  \
  66                  AT91_PMC_PDIV_1)
  67
  68 /* PCK/2 = MCK Master Clock from PLLA */
  69 #define CONFIG_SYS_MCKR2_VAL            \
  70                 (AT91_PMC_CSS_PLLA |    \
  71                  AT91_PMC_PRES_1 |      \
  72                  AT91SAM9_PMC_MDIV_2 |  \
  73                  AT91_PMC_PDIV_1)
  74
  75 /* define PDC[31:16] as DATA[31:16] */
  76 #define CONFIG_SYS_PIOC_PDR_VAL1        0xFFFF0000
  77 /* no pull-up for D[31:16] */
  78 #define CONFIG_SYS_PIOC_PPUDR_VAL       0xFFFF0000
  79
  80 /* EBI_CSA, no pull-ups for D[15:0], CS1 SDRAM, CS3 NAND Flash */
  81 #define CONFIG_SYS_MATRIX_EBICSA_VAL            \
  82        (AT91_MATRIX_DBPUC | AT91_MATRIX_CS1A_SDRAMC)
  83
  84 /* SDRAM */
  85 /* SDRAMC_MR Mode register */
  86 #define CONFIG_SYS_SDRC_MR_VAL1         AT91_SDRAMC_MODE_NORMAL
  87 /* SDRAMC_TR - Refresh Timer register */
  88 #define CONFIG_SYS_SDRC_TR_VAL1         0x13C
  89 /* SDRAMC_CR - Configuration register*/
  90 #define CONFIG_SYS_SDRC_CR_VAL                                                  \
  91                 (AT91_SDRAMC_NC_9 |                                             \
  92                  AT91_SDRAMC_NR_13 |                                            \
  93                  AT91_SDRAMC_NB_4 |                                             \
  94                  AT91_SDRAMC_CAS_3 |                                            \
  95                  AT91_SDRAMC_DBW_32 |                                           \
  96                  (1 <<  8) |            /* Write Recovery Delay */              \
  97                  (7 << 12) |            /* Row Cycle Delay */                   \
  98                  (3 << 16) |            /* Row Precharge Delay */               \
  99                  (2 << 20) |            /* Row to Column Delay */               \
 100                  (5 << 24) |            /* Active to Precharge Delay */         \
 101                  (1 << 28))             /* Exit Self Refresh to Active Delay */
 102
 103 /* Memory Device Register -> SDRAM */
 104 #define CONFIG_SYS_SDRC_MDR_VAL         AT91_SDRAMC_MD_SDRAM
 105 #define CONFIG_SYS_SDRC_MR_VAL2         AT91_SDRAMC_MODE_PRECHARGE
 106 #define CONFIG_SYS_SDRAM_VAL1           0               /* SDRAM_BASE */
 107 #define CONFIG_SYS_SDRC_MR_VAL3         AT91_SDRAMC_MODE_REFRESH
 108 #define CONFIG_SYS_SDRAM_VAL2           0               /* SDRAM_BASE */
 109 #define CONFIG_SYS_SDRAM_VAL3           0               /* SDRAM_BASE */
 110 #define CONFIG_SYS_SDRAM_VAL4           0               /* SDRAM_BASE */
 111 #define CONFIG_SYS_SDRAM_VAL5           0               /* SDRAM_BASE */
 112 #define CONFIG_SYS_SDRAM_VAL6           0               /* SDRAM_BASE */
 113 #define CONFIG_SYS_SDRAM_VAL7           0               /* SDRAM_BASE */
 114 #define CONFIG_SYS_SDRAM_VAL8           0               /* SDRAM_BASE */
 115 #define CONFIG_SYS_SDRAM_VAL9           0               /* SDRAM_BASE */
 116 #define CONFIG_SYS_SDRC_MR_VAL4         AT91_SDRAMC_MODE_LMR
 117 #define CONFIG_SYS_SDRAM_VAL10          0               /* SDRAM_BASE */
 118 #define CONFIG_SYS_SDRC_MR_VAL5         AT91_SDRAMC_MODE_NORMAL
 119 #define CONFIG_SYS_SDRAM_VAL11          0               /* SDRAM_BASE */
 120 #define CONFIG_SYS_SDRC_TR_VAL2         1200            /* SDRAM_TR */
 121 #define CONFIG_SYS_SDRAM_VAL12          0               /* SDRAM_BASE */
 122
 123 /* setup SMC0, CS0 (NOR Flash) - 16-bit, 15 WS */
 124 #define CONFIG_SYS_SMC0_SETUP0_VAL                                      \
 125                 (AT91_SMC_NWESETUP_(10) | AT91_SMC_NCS_WRSETUP_(10) |   \
 126                  AT91_SMC_NRDSETUP_(10) | AT91_SMC_NCS_RDSETUP_(10))
 127 #define CONFIG_SYS_SMC0_PULSE0_VAL                                      \
 128                 (AT91_SMC_NWEPULSE_(11) | AT91_SMC_NCS_WRPULSE_(11) |   \
 129                  AT91_SMC_NRDPULSE_(11) | AT91_SMC_NCS_RDPULSE_(11))
 130 #define CONFIG_SYS_SMC0_CYCLE0_VAL      \
 131                 (AT91_SMC_NWECYCLE_(22) | AT91_SMC_NRDCYCLE_(22))
 132 #define CONFIG_SYS_SMC0_MODE0_VAL                               \
 133                 (AT91_SMC_READMODE | AT91_SMC_WRITEMODE |       \
 134                  AT91_SMC_DBW_16 |                              \
 135                  AT91_SMC_TDFMODE |                             \
 136                  AT91_SMC_TDF_(6))
 137
 138 /* user reset enable */
 139 #define CONFIG_SYS_RSTC_RMR_VAL                 \
 140                 (AT91_RSTC_KEY |                \
 141                 AT91_RSTC_PROCRST |             \
 142                 AT91_RSTC_RSTTYP_WAKEUP |       \
 143                 AT91_RSTC_RSTTYP_WATCHDOG)
 144
 145 /* Disable Watchdog */
 146 #define CONFIG_SYS_WDTC_WDMR_VAL                                \
 147                 (AT91_WDT_WDIDLEHLT | AT91_WDT_WDDBGHLT |       \
 148                  AT91_WDT_WDV |                                 \
 149                  AT91_WDT_WDDIS |                               \
 150                  AT91_WDT_WDD)
 151
 152 #define CONFIG_CMDLINE_TAG      1       /* enable passing of ATAGs */
 153 #define CONFIG_SETUP_MEMORY_TAGS 1
 154 #define CONFIG_INITRD_TAG       1
 155
 156 #undef CONFIG_SKIP_LOWLEVEL_INIT
 157 #undef CONFIG_SKIP_RELOCATE_UBOOT
 158
 159 /*
 160  * Hardware drivers
 161  */
 162 #define CONFIG_AT91_GPIO        1
 163 #define CONFIG_ATMEL_USART      1
 164 #undef CONFIG_USART0
 165 #undef CONFIG_USART1
 166 #undef CONFIG_USART2
 167 #define CONFIG_USART3           1       /* USART 3 is DBGU */
 168
 169 /* LCD */
 170 #define CONFIG_LCD                      1
 171 #define LCD_BPP                         LCD_COLOR8
 172 #define CONFIG_LCD_LOGO                 1
 173 #undef LCD_TEST_PATTERN
 174 #define CONFIG_LCD_INFO                 1
 175 #define CONFIG_LCD_INFO_BELOW_LOGO      1
 176 #define CONFIG_SYS_WHITE_ON_BLACK       1
 177 #define CONFIG_ATMEL_LCD                1
 178 #define CONFIG_ATMEL_LCD_BGR555         1
 179 #define CONFIG_SYS_CONSOLE_IS_IN_ENV    1
 180
 181 /* LED */
 182 #define CONFIG_AT91_LED
 183 #define CONFIG_RED_LED          AT91_PIN_PC12
 184 #define CONFIG_GREEN_LED        AT91_PIN_PC13
 185 #define CONFIG_YELLOW_LED       AT91_PIN_PC15
 186
 187 #define CONFIG_BOOTDELAY        3
 188
 189 /*
 190  * BOOTP options
 191  */
 192 #define CONFIG_BOOTP_BOOTFILESIZE       1
 193 #define CONFIG_BOOTP_BOOTPATH           1
 194 #define CONFIG_BOOTP_GATEWAY            1
 195 #define CONFIG_BOOTP_HOSTNAME           1
 196
 197 /*
 198  * Command line configuration.
 199  */
 200 #include <config_cmd_default.h>
 201 #undef CONFIG_CMD_BDI
 202 #undef CONFIG_CMD_IMI
 203 #undef CONFIG_CMD_AUTOSCRIPT
 204 #undef CONFIG_CMD_FPGA
 205 #undef CONFIG_CMD_LOADS
 206 #undef CONFIG_CMD_IMLS
 207
 208 #define CONFIG_CMD_PING         1
 209 #define CONFIG_CMD_DHCP         1
 210 #define CONFIG_CMD_NAND         1
 211 #define CONFIG_CMD_USB          1
 212
 213 /* SDRAM */
 214 #define CONFIG_NR_DRAM_BANKS                    1
 215 #define PHYS_SDRAM                              0x20000000
 216 #define PHYS_SDRAM_SIZE                         0x04000000      /* 64 megs */
 217
 218 /* DataFlash */
 219 #define CONFIG_ATMEL_DATAFLASH_SPI
 220 #define CONFIG_HAS_DATAFLASH
 221 #define CONFIG_SYS_SPI_WRITE_TOUT               (5 * CONFIG_SYS_HZ)
 222 #define CONFIG_SYS_MAX_DATAFLASH_BANKS          1
 223 #define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0     0xC0000000      /* CS0 */
 224 #define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS3     0xD0000000      /* CS3 */
 225 #define AT91_SPI_CLK                            15000000
 226 #define DATAFLASH_TCSS                          (0x1a << 16)
 227 #define DATAFLASH_TCHS                          (0x1 << 24)
 228
 229 /* NAND flash */
 230 #define CONFIG_NAND_ATMEL
 231 #define NAND_MAX_CHIPS                          1
 232 #define CONFIG_SYS_MAX_NAND_DEVICE              1
 233 #define CONFIG_SYS_NAND_BASE                    0x40000000
 234 #define CONFIG_SYS_NAND_DBW_8                   1
 235 /* our ALE is AD22 */
 236 #define CONFIG_SYS_NAND_MASK_ALE                (1 << 22)
 237 /* our CLE is AD21 */
 238 #define CONFIG_SYS_NAND_MASK_CLE                (1 << 21)
 239 #define CONFIG_SYS_NAND_ENABLE_PIN              AT91_PIN_PC14
 240 #define CONFIG_SYS_NAND_READY_PIN               AT91_PIN_PA16
 241
 242 /* NOR flash */
 243 #define CONFIG_SYS_FLASH_CFI                    1
 244 #define CONFIG_FLASH_CFI_DRIVER                 1
 245 #define PHYS_FLASH_1                            0x10000000
 246 #define CONFIG_SYS_FLASH_BASE                   PHYS_FLASH_1
 247 #define CONFIG_SYS_MAX_FLASH_SECT               256
 248 #define CONFIG_SYS_MAX_FLASH_BANKS              1
 249
 250 /* Ethernet */
 251 #define CONFIG_DRIVER_DM9000                    1
 252 #define CONFIG_DM9000_BASE                      0x30000000
 253 #define DM9000_IO                               CONFIG_DM9000_BASE
 254 #define DM9000_DATA                             (CONFIG_DM9000_BASE + 4)
 255 #define CONFIG_DM9000_USE_16BIT                 1
 256 #define CONFIG_NET_RETRY_COUNT                  20
 257 #define CONFIG_RESET_PHY_R                      1
 258 #define CONFIG_NET_MULTI
 259
 260 /* USB */
 261 #define CONFIG_USB_ATMEL
 262 #define CONFIG_USB_OHCI_NEW                     1
 263 #define CONFIG_DOS_PARTITION                    1
 264 #define CONFIG_SYS_USB_OHCI_CPU_INIT            1
 265 #define CONFIG_SYS_USB_OHCI_REGS_BASE           0x00500000
 266 #define CONFIG_SYS_USB_OHCI_SLOT_NAME           "at91sam9261"
 267 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS      2
 268 #define CONFIG_USB_STORAGE                      1
 269
 270 #define CONFIG_SYS_LOAD_ADDR                    0x22000000
 271
 272 #define CONFIG_SYS_MEMTEST_START                PHYS_SDRAM
 273 #define CONFIG_SYS_MEMTEST_END                  0x23e00000
 274
 275 #undef CONFIG_SYS_USE_DATAFLASH_CS0
 276 #undef CONFIG_SYS_USE_NANDFLASH
 277 #define CONFIG_SYS_USE_FLASH    1
 278
 279 #ifdef CONFIG_SYS_USE_DATAFLASH_CS0
 280
 281 /* bootstrap + u-boot + env + linux in dataflash on CS0 */
 282 #define CONFIG_ENV_IS_IN_DATAFLASH      1
 283 #define CONFIG_SYS_MONITOR_BASE         \
 284                 (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + 0x8400)
 285 #define CONFIG_ENV_OFFSET       0x4200
 286 #define CONFIG_ENV_ADDR         \
 287                 (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + CONFIG_ENV_OFFSET)
 288 #define CONFIG_ENV_SIZE         0x4200
 289 #define CONFIG_BOOTCOMMAND      "cp.b 0xC0042000 0x22000000 0x210000; bootm"
 290 #define CONFIG_BOOTARGS         "console=ttyS0,115200 "                 \
 291                                 "root=/dev/mtdblock0 "                  \
 292                                 "mtdparts=atmel_nand:-(root) "          \
 293                                 "rw rootfstype=jffs2"
 294
 295 #elif defined(CONFIG_SYS_USE_NANDFLASH) /* CONFIG_SYS_USE_NANDFLASH */
 296
 297 /* bootstrap + u-boot + env + linux in nandflash */
 298 #define CONFIG_ENV_IS_IN_NAND           1
 299 #define CONFIG_ENV_OFFSET               0x60000
 300 #define CONFIG_ENV_OFFSET_REDUND        0x80000
 301 #define CONFIG_ENV_SIZE                 0x20000         /* 1 sector = 128 kB */
 302 #define CONFIG_BOOTCOMMAND      "nand read 0x22000000 0xA0000 0x200000; bootm"
 303 #define CONFIG_BOOTARGS         "console=ttyS0,115200 "                 \
 304                                 "root=/dev/mtdblock5 "                  \
 305                                 "mtdparts=atmel_nand:128k(bootstrap)ro,"        \
 306                                 "256k(uboot)ro,128k(env1)ro,"           \
 307                                 "128k(env2)ro,2M(linux),-(root) "       \
 308                                 "rw rootfstype=jffs2"
 309
 310 #elif defined (CONFIG_SYS_USE_FLASH)
 311
 312 #define CONFIG_ENV_IS_IN_FLASH  1
 313 #define CONFIG_ENV_OFFSET       0x40000
 314 #define CONFIG_ENV_SECT_SIZE    0x10000
 315 #define CONFIG_ENV_SIZE         0x10000
 316 #define CONFIG_ENV_OVERWRITE    1
 317
 318 /* JFFS Partition offset set */
 319 #define CONFIG_SYS_JFFS2_FIRST_BANK     0
 320 #define CONFIG_SYS_JFFS2_NUM_BANKS      1
 321
 322 /* 512k reserved for u-boot */
 323 #define CONFIG_SYS_JFFS2_FIRST_SECTOR   11
 324
 325 #define CONFIG_BOOTCOMMAND      "run flashboot"
 326
 327 #define MTDIDS_DEFAULT          "nor0=physmap-flash.0,nand0=nand"
 328 #define MTDPARTS_DEFAULT                \
 329         "mtdparts=physmap-flash.0:"     \
 330                 "256k(u-boot)ro,"       \
 331                 "64k(u-boot-env)ro,"    \
 332                 "1408k(kernel),"        \
 333                 "-(rootfs);"            \
 334         "nand:-(nand)"
 335
 336 #define CONFIG_CON_ROT "fbcon=rotate:3 "
 337 #define CONFIG_BOOTARGS "root=/dev/mtdblock4 rootfstype=jffs2 " CONFIG_CON_ROT
 338
 339 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 340         "mtdids=" MTDIDS_DEFAULT "\0"                           \
 341         "mtdparts=" MTDPARTS_DEFAULT "\0"                       \
 342         "partition=nand0,0\0"                                   \
 343         "ramargs=setenv bootargs $(bootargs) $(mtdparts)\0"     \
 344         "nfsargs=setenv bootargs root=/dev/nfs rw "             \
 345                 CONFIG_CON_ROT                                  \
 346                 "nfsroot=$(serverip):$(rootpath) $(mtdparts)\0" \
 347         "addip=setenv bootargs $(bootargs) "                    \
 348                 "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask)"\
 349                 ":$(hostname):eth0:off\0"                       \
 350         "ramboot=tftpboot 0x22000000 vmImage;"                  \
 351                 "run ramargs;run addip;bootm 22000000\0"        \
 352         "nfsboot=tftpboot 0x22000000 vmImage;"                  \
 353                 "run nfsargs;run addip;bootm 22000000\0"        \
 354         "flashboot=run ramargs;run addip;bootm 0x10050000\0"    \
 355         ""
 356 #else
 357 #error "Undefined memory device"
 358 #endif
 359
 360 #define CONFIG_BAUDRATE                 115200
 361 #define CONFIG_SYS_BAUDRATE_TABLE       {115200 , 19200, 38400, 57600, 9600 }
 362
 363 #define CONFIG_SYS_PROMPT               "pm9261> "
 364 #define CONFIG_SYS_CBSIZE               256
 365 #define CONFIG_SYS_MAXARGS              16
 366 #define CONFIG_SYS_PBSIZE               \
 367                 (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 368 #define CONFIG_SYS_LONGHELP             1
 369 #define CONFIG_CMDLINE_EDITING  1
 370
 371 /*
 372  * Size of malloc() pool
 373  */
 374 #define CONFIG_SYS_MALLOC_LEN           \
 375                 ROUND(3 * CONFIG_ENV_SIZE + 128 * 1024, 0x1000)
 376 #define CONFIG_SYS_GBL_DATA_SIZE        128
 377
 378 #define CONFIG_STACKSIZE                (32 * 1024)     /* regular stack */
 379
 380 #ifdef CONFIG_USE_IRQ
 381 #error CONFIG_USE_IRQ not supported
 382 #endif
 383
 384 #endif