include/configs/pm9261.h

   1 /*
   2  * (C) Copyright 2007-2008
   3  * Stelian Pop <stelian@popies.net>
   4  * Lead Tech Design <www.leadtechdesign.com>
   5  * Ilko Iliev <www.ronetix.at>
   6  *
   7  * Configuation settings for the RONETIX PM9261 board.
   8  *
   9  * SPDX-License-Identifier:     GPL-2.0+
  10  */
  11
  12 #ifndef __CONFIG_H
  13 #define __CONFIG_H
  14
  15 /*
  16  * SoC must be defined first, before hardware.h is included.
  17  * In this case SoC is defined in boards.cfg.
  18  */
  19
  20 #include <asm/hardware.h>
  21 /* ARM asynchronous clock */
  22
  23 #define MASTER_PLL_DIV          15
  24 #define MASTER_PLL_MUL          162
  25 #define MAIN_PLL_DIV            2
  26 #define CONFIG_SYS_AT91_SLOW_CLOCK      32768           /* slow clock xtal */
  27 #define CONFIG_SYS_AT91_MAIN_CLOCK      18432000
  28
  29 #define CONFIG_SYS_AT91_CPU_NAME        "AT91SAM9261"
  30 #define CONFIG_PM9261           1       /* on a Ronetix PM9261 Board    */
  31 #define CONFIG_ARCH_CPU_INIT
  32 #define CONFIG_SYS_TEXT_BASE    0
  33
  34 #define CONFIG_MACH_TYPE        MACH_TYPE_PM9261
  35
  36 /* clocks */
  37 /* CKGR_MOR - enable main osc. */
  38 #define CONFIG_SYS_MOR_VAL                                              \
  39                 (AT91_PMC_MOR_MOSCEN |                                  \
  40                  (255 << 8))            /* Main Oscillator Start-up Time */
  41 #define CONFIG_SYS_PLLAR_VAL                                            \
  42                 (AT91_PMC_PLLAR_29 | /* Bit 29 must be 1 when prog */ \
  43                  AT91_PMC_PLLXR_OUT(3) |                                                \
  44                  ((MASTER_PLL_MUL - 1) << 16) | (MASTER_PLL_DIV))
  45
  46 /* PCK/2 = MCK Master Clock from PLLA */
  47 #define CONFIG_SYS_MCKR1_VAL            \
  48                 (AT91_PMC_MCKR_CSS_SLOW |       \
  49                  AT91_PMC_MCKR_PRES_1 | \
  50                  AT91_PMC_MCKR_MDIV_2)
  51
  52 /* PCK/2 = MCK Master Clock from PLLA */
  53 #define CONFIG_SYS_MCKR2_VAL            \
  54                 (AT91_PMC_MCKR_CSS_PLLA |       \
  55                  AT91_PMC_MCKR_PRES_1 | \
  56                  AT91_PMC_MCKR_MDIV_2)
  57
  58 /* define PDC[31:16] as DATA[31:16] */
  59 #define CONFIG_SYS_PIOC_PDR_VAL1        0xFFFF0000
  60 /* no pull-up for D[31:16] */
  61 #define CONFIG_SYS_PIOC_PPUDR_VAL       0xFFFF0000
  62
  63 /* EBI_CSA, no pull-ups for D[15:0], CS1 SDRAM, CS3 NAND Flash */
  64 #define CONFIG_SYS_MATRIX_EBICSA_VAL            \
  65         (AT91_MATRIX_CSA_DBPUC | AT91_MATRIX_CSA_EBI_CS1A)
  66
  67 /* SDRAM */
  68 /* SDRAMC_MR Mode register */
  69 #define CONFIG_SYS_SDRC_MR_VAL1         AT91_SDRAMC_MODE_NORMAL
  70 /* SDRAMC_TR - Refresh Timer register */
  71 #define CONFIG_SYS_SDRC_TR_VAL1         0x13C
  72 /* SDRAMC_CR - Configuration register*/
  73 #define CONFIG_SYS_SDRC_CR_VAL                                                  \
  74                 (AT91_SDRAMC_NC_9 |                                             \
  75                  AT91_SDRAMC_NR_13 |                                            \
  76                  AT91_SDRAMC_NB_4 |                                             \
  77                  AT91_SDRAMC_CAS_3 |                                            \
  78                  AT91_SDRAMC_DBW_32 |                                           \
  79                  (1 <<  8) |            /* Write Recovery Delay */              \
  80                  (7 << 12) |            /* Row Cycle Delay */                   \
  81                  (3 << 16) |            /* Row Precharge Delay */               \
  82                  (2 << 20) |            /* Row to Column Delay */               \
  83                  (5 << 24) |            /* Active to Precharge Delay */         \
  84                  (1 << 28))             /* Exit Self Refresh to Active Delay */
  85
  86 /* Memory Device Register -> SDRAM */
  87 #define CONFIG_SYS_SDRC_MDR_VAL         AT91_SDRAMC_MD_SDRAM
  88 #define CONFIG_SYS_SDRC_MR_VAL2         AT91_SDRAMC_MODE_PRECHARGE
  89 #define CONFIG_SYS_SDRAM_VAL1           0               /* SDRAM_BASE */
  90 #define CONFIG_SYS_SDRC_MR_VAL3         AT91_SDRAMC_MODE_REFRESH
  91 #define CONFIG_SYS_SDRAM_VAL2           0               /* SDRAM_BASE */
  92 #define CONFIG_SYS_SDRAM_VAL3           0               /* SDRAM_BASE */
  93 #define CONFIG_SYS_SDRAM_VAL4           0               /* SDRAM_BASE */
  94 #define CONFIG_SYS_SDRAM_VAL5           0               /* SDRAM_BASE */
  95 #define CONFIG_SYS_SDRAM_VAL6           0               /* SDRAM_BASE */
  96 #define CONFIG_SYS_SDRAM_VAL7           0               /* SDRAM_BASE */
  97 #define CONFIG_SYS_SDRAM_VAL8           0               /* SDRAM_BASE */
  98 #define CONFIG_SYS_SDRAM_VAL9           0               /* SDRAM_BASE */
  99 #define CONFIG_SYS_SDRC_MR_VAL4         AT91_SDRAMC_MODE_LMR
 100 #define CONFIG_SYS_SDRAM_VAL10          0               /* SDRAM_BASE */
 101 #define CONFIG_SYS_SDRC_MR_VAL5         AT91_SDRAMC_MODE_NORMAL
 102 #define CONFIG_SYS_SDRAM_VAL11          0               /* SDRAM_BASE */
 103 #define CONFIG_SYS_SDRC_TR_VAL2         1200            /* SDRAM_TR */
 104 #define CONFIG_SYS_SDRAM_VAL12          0               /* SDRAM_BASE */
 105
 106 /* setup SMC0, CS0 (NOR Flash) - 16-bit, 15 WS */
 107 #define CONFIG_SYS_SMC0_SETUP0_VAL                                      \
 108                 (AT91_SMC_SETUP_NWE(10) | AT91_SMC_SETUP_NCS_WR(10) |   \
 109                  AT91_SMC_SETUP_NRD(10) | AT91_SMC_SETUP_NCS_RD(10))
 110 #define CONFIG_SYS_SMC0_PULSE0_VAL                                      \
 111                 (AT91_SMC_PULSE_NWE(11) | AT91_SMC_PULSE_NCS_WR(11) |   \
 112                  AT91_SMC_PULSE_NRD(11) | AT91_SMC_PULSE_NCS_RD(11))
 113 #define CONFIG_SYS_SMC0_CYCLE0_VAL      \
 114                 (AT91_SMC_CYCLE_NWE(22) | AT91_SMC_CYCLE_NRD(22))
 115 #define CONFIG_SYS_SMC0_MODE0_VAL                               \
 116                 (AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE |  \
 117                  AT91_SMC_MODE_DBW_16 |                         \
 118                  AT91_SMC_MODE_TDF |                            \
 119                  AT91_SMC_MODE_TDF_CYCLE(6))
 120
 121 /* user reset enable */
 122 #define CONFIG_SYS_RSTC_RMR_VAL                 \
 123                 (AT91_RSTC_KEY |                \
 124                 AT91_RSTC_CR_PROCRST |          \
 125                 AT91_RSTC_MR_ERSTL(1) | \
 126                 AT91_RSTC_MR_ERSTL(2))
 127
 128 /* Disable Watchdog */
 129 #define CONFIG_SYS_WDTC_WDMR_VAL                                \
 130                 (AT91_WDT_MR_WDIDLEHLT | AT91_WDT_MR_WDDBGHLT | \
 131                  AT91_WDT_MR_WDV(0xfff) |                                       \
 132                  AT91_WDT_MR_WDDIS |                            \
 133                  AT91_WDT_MR_WDD(0xfff))
 134
 135 #define CONFIG_CMDLINE_TAG      1       /* enable passing of ATAGs */
 136 #define CONFIG_SETUP_MEMORY_TAGS 1
 137 #define CONFIG_INITRD_TAG       1
 138
 139 #undef CONFIG_SKIP_LOWLEVEL_INIT
 140
 141 /*
 142  * Hardware drivers
 143  */
 144
 145 /* LCD */
 146 #define LCD_BPP                         LCD_COLOR8
 147 #define CONFIG_LCD_LOGO                 1
 148 #undef LCD_TEST_PATTERN
 149 #define CONFIG_LCD_INFO                 1
 150 #define CONFIG_LCD_INFO_BELOW_LOGO      1
 151 #define CONFIG_ATMEL_LCD                1
 152 #define CONFIG_ATMEL_LCD_BGR555         1
 153
 154 /*
 155  * BOOTP options
 156  */
 157 #define CONFIG_BOOTP_BOOTFILESIZE       1
 158 #define CONFIG_BOOTP_BOOTPATH           1
 159 #define CONFIG_BOOTP_GATEWAY            1
 160 #define CONFIG_BOOTP_HOSTNAME           1
 161
 162 /* SDRAM */
 163 #define CONFIG_NR_DRAM_BANKS                    1
 164 #define PHYS_SDRAM                              0x20000000
 165 #define PHYS_SDRAM_SIZE                         0x04000000      /* 64 megs */
 166
 167 /* NAND flash */
 168 #define CONFIG_NAND_ATMEL
 169 #define CONFIG_SYS_MAX_NAND_DEVICE              1
 170 #define CONFIG_SYS_NAND_BASE                    0x40000000
 171 #define CONFIG_SYS_NAND_DBW_8                   1
 172 /* our ALE is AD22 */
 173 #define CONFIG_SYS_NAND_MASK_ALE                (1 << 22)
 174 /* our CLE is AD21 */
 175 #define CONFIG_SYS_NAND_MASK_CLE                (1 << 21)
 176 #define CONFIG_SYS_NAND_ENABLE_PIN              GPIO_PIN_PC(14)
 177 #define CONFIG_SYS_NAND_READY_PIN               GPIO_PIN_PA(16)
 178
 179 /* NOR flash */
 180 #define CONFIG_SYS_FLASH_CFI                    1
 181 #define CONFIG_FLASH_CFI_DRIVER                 1
 182 #define PHYS_FLASH_1                            0x10000000
 183 #define CONFIG_SYS_FLASH_BASE                   PHYS_FLASH_1
 184 #define CONFIG_SYS_MAX_FLASH_SECT               256
 185 #define CONFIG_SYS_MAX_FLASH_BANKS              1
 186
 187 /* Ethernet */
 188 #define CONFIG_DRIVER_DM9000                    1
 189 #define CONFIG_DM9000_BASE                      0x30000000
 190 #define DM9000_IO                               CONFIG_DM9000_BASE
 191 #define DM9000_DATA                             (CONFIG_DM9000_BASE + 4)
 192 #define CONFIG_DM9000_USE_16BIT                 1
 193 #define CONFIG_NET_RETRY_COUNT                  20
 194 #define CONFIG_RESET_PHY_R                      1
 195
 196 /* USB */
 197 #define CONFIG_USB_ATMEL
 198 #define CONFIG_USB_ATMEL_CLK_SEL_PLLB
 199 #define CONFIG_USB_OHCI_NEW                     1
 200 #define CONFIG_SYS_USB_OHCI_CPU_INIT            1
 201 #define CONFIG_SYS_USB_OHCI_REGS_BASE           0x00500000
 202 #define CONFIG_SYS_USB_OHCI_SLOT_NAME           "at91sam9261"
 203 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS      2
 204
 205 #define CONFIG_SYS_LOAD_ADDR                    0x22000000
 206
 207 #define CONFIG_SYS_MEMTEST_START                PHYS_SDRAM
 208 #define CONFIG_SYS_MEMTEST_END                  0x23e00000
 209
 210 #undef CONFIG_SYS_USE_DATAFLASH_CS0
 211 #undef CONFIG_SYS_USE_NANDFLASH
 212 #define CONFIG_SYS_USE_FLASH    1
 213
 214 #ifdef CONFIG_SYS_USE_DATAFLASH_CS0
 215
 216 /* bootstrap + u-boot + env + linux in dataflash on CS0 */
 217 #define CONFIG_ENV_OFFSET       0x4200
 218 #define CONFIG_ENV_SIZE         0x4200
 219 #define CONFIG_ENV_SECT_SIZE    0x210
 220 #define CONFIG_ENV_SPI_MAX_HZ   15000000
 221 #define CONFIG_BOOTCOMMAND      "sf probe 0; " \
 222                                 "sf read 0x22000000 0x84000 0x210000; " \
 223                                 "bootm 0x22000000"
 224
 225 #elif defined(CONFIG_SYS_USE_NANDFLASH) /* CONFIG_SYS_USE_NANDFLASH */
 226
 227 /* bootstrap + u-boot + env + linux in nandflash */
 228 #define CONFIG_ENV_OFFSET               0x60000
 229 #define CONFIG_ENV_OFFSET_REDUND        0x80000
 230 #define CONFIG_ENV_SIZE                 0x20000         /* 1 sector = 128 kB */
 231 #define CONFIG_BOOTCOMMAND      "nand read 0x22000000 0xA0000 0x200000; bootm"
 232
 233 #elif defined (CONFIG_SYS_USE_FLASH)
 234
 235 #define CONFIG_ENV_OFFSET       0x40000
 236 #define CONFIG_ENV_SECT_SIZE    0x10000
 237 #define CONFIG_ENV_SIZE         0x10000
 238 #define CONFIG_ENV_OVERWRITE    1
 239
 240 /* JFFS Partition offset set */
 241 #define CONFIG_SYS_JFFS2_FIRST_BANK     0
 242 #define CONFIG_SYS_JFFS2_NUM_BANKS      1
 243
 244 /* 512k reserved for u-boot */
 245 #define CONFIG_SYS_JFFS2_FIRST_SECTOR   11
 246
 247 #define CONFIG_BOOTCOMMAND      "run flashboot"
 248
 249 #define CONFIG_CON_ROT "fbcon=rotate:3 "
 250
 251 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 252         "mtdids=" CONFIG_MTDIDS_DEFAULT "\0"                            \
 253         "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0"                        \
 254         "partition=nand0,0\0"                                   \
 255         "ramargs=setenv bootargs $(bootargs) $(mtdparts)\0"     \
 256         "nfsargs=setenv bootargs root=/dev/nfs rw "             \
 257                 CONFIG_CON_ROT                                  \
 258                 "nfsroot=$(serverip):$(rootpath) $(mtdparts)\0" \
 259         "addip=setenv bootargs $(bootargs) "                    \
 260                 "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask)"\
 261                 ":$(hostname):eth0:off\0"                       \
 262         "ramboot=tftpboot 0x22000000 vmImage;"                  \
 263                 "run ramargs;run addip;bootm 22000000\0"        \
 264         "nfsboot=tftpboot 0x22000000 vmImage;"                  \
 265                 "run nfsargs;run addip;bootm 22000000\0"        \
 266         "flashboot=run ramargs;run addip;bootm 0x10050000\0"    \
 267         ""
 268 #else
 269 #error "Undefined memory device"
 270 #endif
 271
 272 #define CONFIG_SYS_LONGHELP             1
 273 #define CONFIG_CMDLINE_EDITING  1
 274
 275 /*
 276  * Size of malloc() pool
 277  */
 278 #define CONFIG_SYS_MALLOC_LEN           \
 279                 ROUND(3 * CONFIG_ENV_SIZE + 128 * 1024, 0x1000)
 280
 281 #define CONFIG_SYS_SDRAM_BASE   PHYS_SDRAM
 282 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 16 * 1024 - \
 283                                 GENERATED_GBL_DATA_SIZE)
 284
 285 #endif