include/configs/pogo_e02.h

   1 /*
   2  * Copyright (C) 2012
   3  * David Purdy <david.c.purdy@gmail.com>
   4  *
   5  * Based on Kirkwood support:
   6  * (C) Copyright 2009
   7  * Marvell Semiconductor <www.marvell.com>
   8  * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
   9  *
  10  * SPDX-License-Identifier:     GPL-2.0+
  11  */
  12
  13 #ifndef _CONFIG_POGO_E02_H
  14 #define _CONFIG_POGO_E02_H
  15
  16 /*
  17  * Machine type definition and ID
  18  */
  19 #define CONFIG_MACH_TYPE                MACH_TYPE_POGO_E02
  20
  21 /*
  22  * High Level Configuration Options (easy to change)
  23  */
  24 #define CONFIG_FEROCEON_88FR131         /* CPU Core subversion */
  25 #define CONFIG_KW88F6281                /* SOC Name */
  26 #define CONFIG_SKIP_LOWLEVEL_INIT       /* disable board lowlevel_init */
  27
  28 /*
  29  * Commands configuration
  30  */
  31 #define CONFIG_SYS_MVFS
  32 #define CONFIG_CMD_ENV
  33 #define CONFIG_CMD_NAND
  34
  35 /*
  36  * mv-common.h should be defined after CMD configs since it used them
  37  * to enable certain macros
  38  */
  39 #include "mv-common.h"
  40
  41 /*
  42  *  Environment variables configurations
  43  */
  44 #ifdef CONFIG_CMD_NAND
  45 #define CONFIG_ENV_IS_IN_NAND
  46 #define CONFIG_ENV_SECT_SIZE            0x20000 /* 128K */
  47 #else
  48 #define CONFIG_ENV_IS_NOWHERE
  49 #endif
  50
  51 #define CONFIG_ENV_SIZE                 0x20000 /* 128k */
  52 #define CONFIG_ENV_OFFSET               0x60000 /* env starts here */
  53
  54 /*
  55  * Default environment variables
  56  */
  57 #define CONFIG_BOOTCOMMAND \
  58         "setenv bootargs $(bootargs_console); " \
  59         "run bootcmd_usb; " \
  60         "bootm 0x00800000 0x01100000"
  61
  62 #define CONFIG_EXTRA_ENV_SETTINGS \
  63         "mtdparts=mtdparts=orion_nand:1M(u-boot),4M(uImage)," \
  64         "32M(rootfs),-(data)\0"\
  65         "mtdids=nand0=orion_nand\0"\
  66         "bootargs_console=console=ttyS0,115200\0" \
  67         "bootcmd_usb=usb start; ext2load usb 0:1 0x00800000 /uImage; " \
  68         "ext2load usb 0:1 0x01100000 /uInitrd\0"
  69
  70 /*
  71  * Ethernet Driver configuration
  72  */
  73 #ifdef CONFIG_CMD_NET
  74 #define CONFIG_MVGBE_PORTS      {1, 0}  /* enable port 0 only */
  75 #define CONFIG_PHY_BASE_ADR     0
  76 #endif /* CONFIG_CMD_NET */
  77
  78 /*
  79  * File system
  80  */
  81 #define CONFIG_CMD_JFFS2
  82 #define CONFIG_CMD_UBIFS
  83 #define CONFIG_RBTREE
  84 #define CONFIG_MTD_DEVICE               /* needed for mtdparts commands */
  85 #define CONFIG_MTD_PARTITIONS
  86 #define CONFIG_CMD_MTDPARTS
  87 #define CONFIG_LZO
  88
  89 #endif /* _CONFIG_POGO_E02_H */