include/configs/pogo_e02.h

   1 /*
   2  * Copyright (C) 2012
   3  * David Purdy <david.c.purdy@gmail.com>
   4  *
   5  * Based on Kirkwood support:
   6  * (C) Copyright 2009
   7  * Marvell Semiconductor <www.marvell.com>
   8  * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
   9  *
  10  * SPDX-License-Identifier:     GPL-2.0+
  11  */
  12
  13 #ifndef _CONFIG_POGO_E02_H
  14 #define _CONFIG_POGO_E02_H
  15
  16 /*
  17  * Machine type definition and ID
  18  */
  19 #define MACH_TYPE_POGO_E02              3542
  20 #define CONFIG_MACH_TYPE                MACH_TYPE_POGO_E02
  21 #define CONFIG_IDENT_STRING             "\nPogo E02"
  22
  23 /*
  24  * High Level Configuration Options (easy to change)
  25  */
  26 #define CONFIG_FEROCEON_88FR131         /* CPU Core subversion */
  27 #define CONFIG_KIRKWOOD                 /* SOC Family Name */
  28 #define CONFIG_KW88F6281                /* SOC Name */
  29 #define CONFIG_SKIP_LOWLEVEL_INIT       /* disable board lowlevel_init */
  30
  31 /*
  32  * Commands configuration
  33  */
  34 #define CONFIG_SYS_NO_FLASH             /* Declare no flash (NOR/SPI) */
  35 #define CONFIG_SYS_MVFS
  36 #include <config_cmd_default.h>
  37 #define CONFIG_CMD_DHCP
  38 #define CONFIG_CMD_ENV
  39 #define CONFIG_CMD_MII
  40 #define CONFIG_CMD_NAND
  41 #define CONFIG_CMD_PING
  42 #define CONFIG_CMD_USB
  43
  44 /*
  45  * mv-common.h should be defined after CMD configs since it used them
  46  * to enable certain macros
  47  */
  48 #include "mv-common.h"
  49
  50 /* Remove or override few declarations from mv-common.h */
  51 #undef CONFIG_SYS_PROMPT        /* previously defined in mv-common.h */
  52 #define CONFIG_SYS_PROMPT       "PogoE02> "
  53
  54 /*
  55  *  Environment variables configurations
  56  */
  57 #ifdef CONFIG_CMD_NAND
  58 #define CONFIG_ENV_IS_IN_NAND
  59 #define CONFIG_ENV_SECT_SIZE            0x20000 /* 128K */
  60 #else
  61 #define CONFIG_ENV_IS_NOWHERE
  62 #endif
  63
  64 #define CONFIG_ENV_SIZE                 0x20000 /* 128k */
  65 #define CONFIG_ENV_OFFSET               0x60000 /* env starts here */
  66
  67 /*
  68  * Default environment variables
  69  */
  70 #define CONFIG_BOOTCOMMAND \
  71         "setenv bootargs $(bootargs_console); " \
  72         "run bootcmd_usb; " \
  73         "bootm 0x00800000 0x01100000"
  74
  75 #define CONFIG_EXTRA_ENV_SETTINGS \
  76         "mtdparts=mtdparts=orion_nand:1M(u-boot),4M(uImage)," \
  77         "32M(rootfs),-(data)\0"\
  78         "mtdids=nand0=orion_nand\0"\
  79         "bootargs_console=console=ttyS0,115200\0" \
  80         "bootcmd_usb=usb start; ext2load usb 0:1 0x00800000 /uImage; " \
  81         "ext2load usb 0:1 0x01100000 /uInitrd\0"
  82
  83 /*
  84  * Ethernet Driver configuration
  85  */
  86 #ifdef CONFIG_CMD_NET
  87 #define CONFIG_MVGBE_PORTS      {1, 0}  /* enable port 0 only */
  88 #define CONFIG_PHY_BASE_ADR     0
  89 #endif /* CONFIG_CMD_NET */
  90
  91 /*
  92  * File system
  93  */
  94 #define CONFIG_CMD_EXT2
  95 #define CONFIG_CMD_FAT
  96 #define CONFIG_CMD_JFFS2
  97 #define CONFIG_CMD_UBI
  98 #define CONFIG_CMD_UBIFS
  99 #define CONFIG_RBTREE
 100 #define CONFIG_MTD_DEVICE               /* needed for mtdparts commands */
 101 #define CONFIG_MTD_PARTITIONS
 102 #define CONFIG_CMD_MTDPARTS
 103 #define CONFIG_LZO
 104
 105 #endif /* _CONFIG_POGO_E02_H */