include/configs/pogo_e02.h

   1 /*
   2  * Copyright (C) 2012
   3  * David Purdy <david.c.purdy@gmail.com>
   4  *
   5  * Based on Kirkwood support:
   6  * (C) Copyright 2009
   7  * Marvell Semiconductor <www.marvell.com>
   8  * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
   9  *
  10  * SPDX-License-Identifier:     GPL-2.0+
  11  */
  12
  13 #ifndef _CONFIG_POGO_E02_H
  14 #define _CONFIG_POGO_E02_H
  15
  16 /*
  17  * Machine type definition and ID
  18  */
  19 #define MACH_TYPE_POGO_E02              3542
  20 #define CONFIG_MACH_TYPE                MACH_TYPE_POGO_E02
  21 #define CONFIG_IDENT_STRING             "\nPogo E02"
  22
  23 /*
  24  * High Level Configuration Options (easy to change)
  25  */
  26 #define CONFIG_FEROCEON_88FR131         /* CPU Core subversion */
  27 #define CONFIG_KW88F6281                /* SOC Name */
  28 #define CONFIG_SKIP_LOWLEVEL_INIT       /* disable board lowlevel_init */
  29
  30 /*
  31  * Commands configuration
  32  */
  33 #define CONFIG_SYS_NO_FLASH             /* Declare no flash (NOR/SPI) */
  34 #define CONFIG_SYS_MVFS
  35 #include <config_cmd_default.h>
  36 #define CONFIG_CMD_DHCP
  37 #define CONFIG_CMD_ENV
  38 #define CONFIG_CMD_MII
  39 #define CONFIG_CMD_NAND
  40 #define CONFIG_CMD_PING
  41 #define CONFIG_CMD_USB
  42
  43 /*
  44  * mv-common.h should be defined after CMD configs since it used them
  45  * to enable certain macros
  46  */
  47 #include "mv-common.h"
  48
  49 /* Remove or override few declarations from mv-common.h */
  50 #undef CONFIG_SYS_PROMPT        /* previously defined in mv-common.h */
  51 #define CONFIG_SYS_PROMPT       "PogoE02> "
  52
  53 /*
  54  *  Environment variables configurations
  55  */
  56 #ifdef CONFIG_CMD_NAND
  57 #define CONFIG_ENV_IS_IN_NAND
  58 #define CONFIG_ENV_SECT_SIZE            0x20000 /* 128K */
  59 #else
  60 #define CONFIG_ENV_IS_NOWHERE
  61 #endif
  62
  63 #define CONFIG_ENV_SIZE                 0x20000 /* 128k */
  64 #define CONFIG_ENV_OFFSET               0x60000 /* env starts here */
  65
  66 /*
  67  * Default environment variables
  68  */
  69 #define CONFIG_BOOTCOMMAND \
  70         "setenv bootargs $(bootargs_console); " \
  71         "run bootcmd_usb; " \
  72         "bootm 0x00800000 0x01100000"
  73
  74 #define CONFIG_EXTRA_ENV_SETTINGS \
  75         "mtdparts=mtdparts=orion_nand:1M(u-boot),4M(uImage)," \
  76         "32M(rootfs),-(data)\0"\
  77         "mtdids=nand0=orion_nand\0"\
  78         "bootargs_console=console=ttyS0,115200\0" \
  79         "bootcmd_usb=usb start; ext2load usb 0:1 0x00800000 /uImage; " \
  80         "ext2load usb 0:1 0x01100000 /uInitrd\0"
  81
  82 /*
  83  * Ethernet Driver configuration
  84  */
  85 #ifdef CONFIG_CMD_NET
  86 #define CONFIG_MVGBE_PORTS      {1, 0}  /* enable port 0 only */
  87 #define CONFIG_PHY_BASE_ADR     0
  88 #endif /* CONFIG_CMD_NET */
  89
  90 /*
  91  * File system
  92  */
  93 #define CONFIG_CMD_EXT2
  94 #define CONFIG_CMD_FAT
  95 #define CONFIG_CMD_JFFS2
  96 #define CONFIG_CMD_UBI
  97 #define CONFIG_CMD_UBIFS
  98 #define CONFIG_RBTREE
  99 #define CONFIG_MTD_DEVICE               /* needed for mtdparts commands */
 100 #define CONFIG_MTD_PARTITIONS
 101 #define CONFIG_CMD_MTDPARTS
 102 #define CONFIG_LZO
 103
 104 #endif /* _CONFIG_POGO_E02_H */