include/configs/pogo_e02.h

   1 /*
   2  * Copyright (C) 2012
   3  * David Purdy <david.c.purdy@gmail.com>
   4  *
   5  * Based on Kirkwood support:
   6  * (C) Copyright 2009
   7  * Marvell Semiconductor <www.marvell.com>
   8  * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
   9  *
  10  * SPDX-License-Identifier:     GPL-2.0+
  11  */
  12
  13 #ifndef _CONFIG_POGO_E02_H
  14 #define _CONFIG_POGO_E02_H
  15
  16 /*
  17  * Machine type definition and ID
  18  */
  19 #define CONFIG_MACH_TYPE                MACH_TYPE_POGO_E02
  20
  21 /*
  22  * High Level Configuration Options (easy to change)
  23  */
  24 #define CONFIG_FEROCEON_88FR131         /* CPU Core subversion */
  25 #define CONFIG_KW88F6281                /* SOC Name */
  26 #define CONFIG_SKIP_LOWLEVEL_INIT       /* disable board lowlevel_init */
  27
  28 /*
  29  * Commands configuration
  30  */
  31 #define CONFIG_SYS_MVFS
  32 #define CONFIG_CMD_NAND
  33
  34 /*
  35  * mv-common.h should be defined after CMD configs since it used them
  36  * to enable certain macros
  37  */
  38 #include "mv-common.h"
  39
  40 /*
  41  *  Environment variables configurations
  42  */
  43 #ifdef CONFIG_CMD_NAND
  44 #define CONFIG_ENV_IS_IN_NAND
  45 #define CONFIG_ENV_SECT_SIZE            0x20000 /* 128K */
  46 #else
  47 #define CONFIG_ENV_IS_NOWHERE
  48 #endif
  49
  50 #define CONFIG_ENV_SIZE                 0x20000 /* 128k */
  51 #define CONFIG_ENV_OFFSET               0x60000 /* env starts here */
  52
  53 /*
  54  * Default environment variables
  55  */
  56 #define CONFIG_BOOTCOMMAND \
  57         "setenv bootargs $(bootargs_console); " \
  58         "run bootcmd_usb; " \
  59         "bootm 0x00800000 0x01100000"
  60
  61 #define CONFIG_EXTRA_ENV_SETTINGS \
  62         "mtdparts=mtdparts=orion_nand:1M(u-boot),4M(uImage)," \
  63         "32M(rootfs),-(data)\0"\
  64         "mtdids=nand0=orion_nand\0"\
  65         "bootargs_console=console=ttyS0,115200\0" \
  66         "bootcmd_usb=usb start; ext2load usb 0:1 0x00800000 /uImage; " \
  67         "ext2load usb 0:1 0x01100000 /uInitrd\0"
  68
  69 /*
  70  * Ethernet Driver configuration
  71  */
  72 #ifdef CONFIG_CMD_NET
  73 #define CONFIG_MVGBE_PORTS      {1, 0}  /* enable port 0 only */
  74 #define CONFIG_PHY_BASE_ADR     0
  75 #endif /* CONFIG_CMD_NET */
  76
  77 /*
  78  * File system
  79  */
  80 #define CONFIG_CMD_UBIFS
  81 #define CONFIG_RBTREE
  82 #define CONFIG_MTD_DEVICE               /* needed for mtdparts commands */
  83 #define CONFIG_MTD_PARTITIONS
  84 #define CONFIG_CMD_MTDPARTS
  85 #define CONFIG_LZO
  86
  87 #endif /* _CONFIG_POGO_E02_H */