include/configs/qemu-mips.h

   1 /*
   2  * (C) Copyright 2003
   3  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
   4  *
   5  * SPDX-License-Identifier:     GPL-2.0+
   6  */
   7
   8 /*
   9  * This file contains the configuration parameters for qemu-mips target.
  10  */
  11
  12 #ifndef __CONFIG_H
  13 #define __CONFIG_H
  14
  15 #define CONFIG_QEMU_MIPS
  16
  17 #define CONFIG_DISPLAY_BOARDINFO
  18 #define CONFIG_MISC_INIT_R
  19
  20 #define CONFIG_BOOTDELAY        10      /* autoboot after 10 seconds */
  21
  22 #define CONFIG_BAUDRATE         115200
  23
  24 #define CONFIG_TIMESTAMP                /* Print image info with timestamp */
  25 #undef CONFIG_BOOTARGS
  26
  27 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
  28         "addmisc=setenv bootargs ${bootargs} "                          \
  29                 "console=ttyS0,${baudrate} "                            \
  30                 "panic=1\0"                                             \
  31         "bootfile=/tftpboot/vmlinux\0"                          \
  32         "load=tftp 80500000 ${u-boot}\0"                                \
  33         ""
  34
  35 #define CONFIG_BOOTCOMMAND      "bootp;bootelf"
  36
  37 /*
  38  * BOOTP options
  39  */
  40 #define CONFIG_BOOTP_BOOTFILESIZE
  41 #define CONFIG_BOOTP_BOOTPATH
  42 #define CONFIG_BOOTP_GATEWAY
  43 #define CONFIG_BOOTP_HOSTNAME
  44
  45 /*
  46  * Command line configuration.
  47  */
  48 #include <config_cmd_default.h>
  49
  50 #define CONFIG_CMD_ELF
  51 #define CONFIG_CMD_FAT
  52 #define CONFIG_CMD_EXT2
  53 #undef CONFIG_CMD_LOADB
  54 #undef CONFIG_CMD_LOADS
  55 #define CONFIG_CMD_DHCP
  56
  57 #define CONFIG_DRIVER_NE2000
  58 #define CONFIG_DRIVER_NE2000_BASE       0xb4000300
  59
  60 #define CONFIG_SYS_NS16550
  61 #define CONFIG_SYS_NS16550_SERIAL
  62 #define CONFIG_SYS_NS16550_REG_SIZE     1
  63 #define CONFIG_SYS_NS16550_CLK          115200
  64 #define CONFIG_SYS_NS16550_COM1         0xb40003f8
  65 #define CONFIG_CONS_INDEX               1
  66
  67 #define CONFIG_CMD_IDE
  68 #define CONFIG_DOS_PARTITION
  69
  70 #define CONFIG_SYS_IDE_MAXBUS           2
  71 #define CONFIG_SYS_ATA_IDE0_OFFSET      0x1f0
  72 #define CONFIG_SYS_ATA_IDE1_OFFSET      0x170
  73 #define CONFIG_SYS_ATA_DATA_OFFSET      0
  74 #define CONFIG_SYS_ATA_REG_OFFSET       0
  75 #define CONFIG_SYS_ATA_BASE_ADDR        0xb4000000
  76
  77 #define CONFIG_SYS_IDE_MAXDEVICE        4
  78
  79 /*
  80  * Miscellaneous configurable options
  81  */
  82 #define CONFIG_SYS_LONGHELP             /* undef to save memory */
  83
  84 /* Monitor Command Prompt */
  85 #if defined(CONFIG_SYS_LITTLE_ENDIAN)
  86 #define CONFIG_SYS_PROMPT               "qemu-mipsel # "
  87 #else
  88 #define CONFIG_SYS_PROMPT               "qemu-mips # "
  89 #endif
  90
  91 #define CONFIG_AUTO_COMPLETE
  92 #define CONFIG_CMDLINE_EDITING
  93 #define CONFIG_SYS_HUSH_PARSER
  94
  95 /* Console I/O Buffer Size */
  96 #define CONFIG_SYS_CBSIZE               256
  97 /* Print Buffer Size */
  98 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
  99 /* max number of command args */
 100 #define CONFIG_SYS_MAXARGS              16
 101
 102 #define CONFIG_SYS_MALLOC_LEN           128*1024
 103
 104 #define CONFIG_SYS_BOOTPARAMS_LEN       128*1024
 105
 106 #define CONFIG_SYS_MHZ                  132
 107
 108 #define CONFIG_SYS_MIPS_TIMER_FREQ      (CONFIG_SYS_MHZ * 1000000)
 109
 110 /* Cached addr */
 111 #define CONFIG_SYS_SDRAM_BASE           0x80000000
 112
 113 /* default load address */
 114 #define CONFIG_SYS_LOAD_ADDR            0x81000000
 115
 116 #define CONFIG_SYS_MEMTEST_START        0x80100000
 117 #define CONFIG_SYS_MEMTEST_END          0x80800000
 118
 119 /*-----------------------------------------------------------------------
 120  * FLASH and environment organization
 121  */
 122 /* The following #defines are needed to get flash environment right */
 123 #define CONFIG_SYS_TEXT_BASE            0xbfc00000 /* Rom version */
 124 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
 125 #define CONFIG_SYS_MONITOR_LEN          (192 << 10)
 126
 127 #define CONFIG_SYS_INIT_SP_OFFSET       0x400000
 128
 129 /* We boot from this flash, selected with dip switch */
 130 #define CONFIG_SYS_FLASH_BASE           0xbfc00000
 131 #define CONFIG_SYS_MAX_FLASH_BANKS      1
 132 #define CONFIG_SYS_MAX_FLASH_SECT       128
 133 #define CONFIG_SYS_FLASH_CFI
 134 #define CONFIG_FLASH_CFI_DRIVER
 135 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 136
 137 #define CONFIG_ENV_IS_IN_FLASH
 138 #define CONFIG_ENV_ADDR         (CONFIG_SYS_FLASH_BASE + CONFIG_SYS_MONITOR_LEN)
 139
 140 /* Address and size of Primary Environment Sector */
 141 #define CONFIG_ENV_SIZE         0x8000
 142
 143 #define CONFIG_ENV_OVERWRITE    1
 144
 145 #define MEM_SIZE                128
 146
 147 #define CONFIG_LZMA
 148
 149 /*-----------------------------------------------------------------------
 150  * Cache Configuration
 151  */
 152 #define CONFIG_SYS_DCACHE_SIZE          16384
 153 #define CONFIG_SYS_ICACHE_SIZE          16384
 154 #define CONFIG_SYS_CACHELINE_SIZE       32
 155
 156 #endif /* __CONFIG_H */