include/configs/qemu-mips64.h

   1 /*
   2  * (C) Copyright 2003
   3  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
   4  *
   5  * SPDX-License-Identifier:     GPL-2.0+
   6  */
   7
   8 /*
   9  * This file contains the configuration parameters for qemu-mips64 target.
  10  */
  11
  12 #ifndef __CONFIG_H
  13 #define __CONFIG_H
  14
  15 #define CONFIG_QEMU_MIPS
  16
  17 #define CONFIG_MISC_INIT_R
  18
  19 #define CONFIG_TIMESTAMP                /* Print image info with timestamp */
  20
  21 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
  22         "addmisc=setenv bootargs ${bootargs} "                          \
  23                 "console=ttyS0,${baudrate} "                            \
  24                 "panic=1\0"                                             \
  25         "bootfile=/tftpboot/vmlinux\0"                                  \
  26         "load=tftp ffffffff80500000 ${u-boot}\0"                        \
  27         ""
  28
  29 #define CONFIG_BOOTCOMMAND      "bootp;bootelf"
  30
  31 /*
  32  * BOOTP options
  33  */
  34 #define CONFIG_BOOTP_BOOTFILESIZE
  35 #define CONFIG_BOOTP_BOOTPATH
  36 #define CONFIG_BOOTP_GATEWAY
  37 #define CONFIG_BOOTP_HOSTNAME
  38
  39 /*
  40  * Command line configuration.
  41  */
  42
  43 #define CONFIG_DRIVER_NE2000
  44 #define CONFIG_DRIVER_NE2000_BASE       0xffffffffb4000300
  45
  46 #define CONFIG_SYS_NS16550_SERIAL
  47 #define CONFIG_SYS_NS16550_REG_SIZE     1
  48 #define CONFIG_SYS_NS16550_CLK          115200
  49 #define CONFIG_SYS_NS16550_COM1         0xffffffffb40003f8
  50 #define CONFIG_CONS_INDEX               1
  51
  52 #ifdef CONFIG_SYS_BIG_ENDIAN
  53 #define CONFIG_IDE_SWAP_IO
  54 #endif
  55
  56 #define CONFIG_SYS_IDE_MAXBUS           2
  57 #define CONFIG_SYS_ATA_IDE0_OFFSET      0x1f0
  58 #define CONFIG_SYS_ATA_IDE1_OFFSET      0x170
  59 #define CONFIG_SYS_ATA_DATA_OFFSET      0
  60 #define CONFIG_SYS_ATA_REG_OFFSET       0
  61 #define CONFIG_SYS_ATA_BASE_ADDR        0xffffffffb4000000
  62
  63 #define CONFIG_SYS_IDE_MAXDEVICE        4
  64
  65 /*
  66  * Miscellaneous configurable options
  67  */
  68 #define CONFIG_SYS_LONGHELP             /* undef to save memory */
  69
  70 #define CONFIG_AUTO_COMPLETE
  71 #define CONFIG_CMDLINE_EDITING
  72
  73 #define CONFIG_SYS_MALLOC_LEN           (256 << 10)
  74
  75 #define CONFIG_SYS_BOOTPARAMS_LEN       128*1024
  76
  77 #define CONFIG_SYS_MHZ                  132
  78
  79 #define CONFIG_SYS_MIPS_TIMER_FREQ      (CONFIG_SYS_MHZ * 1000000)
  80
  81 /* Cached addr */
  82 #define CONFIG_SYS_SDRAM_BASE           0xffffffff80000000
  83
  84 /* default load address */
  85 #define CONFIG_SYS_LOAD_ADDR            0xffffffff81000000
  86
  87 #define CONFIG_SYS_MEMTEST_START        0xffffffff80100000
  88 #define CONFIG_SYS_MEMTEST_END          0xffffffff80800000
  89
  90 /*-----------------------------------------------------------------------
  91  * FLASH and environment organization
  92  */
  93 /* The following #defines are needed to get flash environment right */
  94 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
  95
  96 #define CONFIG_SYS_INIT_SP_OFFSET       0x400000
  97
  98 /* We boot from this flash, selected with dip switch */
  99 #define CONFIG_SYS_FLASH_BASE           0xffffffffbfc00000
 100 #define CONFIG_SYS_MAX_FLASH_BANKS      1
 101 #define CONFIG_SYS_MAX_FLASH_SECT       128
 102 #define CONFIG_SYS_FLASH_CFI
 103 #define CONFIG_FLASH_CFI_DRIVER
 104 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 105
 106 /* Address and size of Primary Environment Sector */
 107 #define CONFIG_ENV_SIZE         0x8000
 108 #define CONFIG_ENV_ADDR         (CONFIG_SYS_FLASH_BASE + (4 << 20) - CONFIG_ENV_SIZE)
 109
 110 #define CONFIG_ENV_OVERWRITE    1
 111
 112 #define MEM_SIZE                128
 113
 114 #endif /* __CONFIG_H */