include/configs/qemu-mips64.h

   1 /*
   2  * (C) Copyright 2003
   3  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
   4  *
   5  * SPDX-License-Identifier:     GPL-2.0+
   6  */
   7
   8 /*
   9  * This file contains the configuration parameters for qemu-mips64 target.
  10  */
  11
  12 #ifndef __CONFIG_H
  13 #define __CONFIG_H
  14
  15 #define CONFIG_QEMU_MIPS
  16
  17 #define CONFIG_SYS_GENERIC_BOARD
  18 #define CONFIG_DISPLAY_BOARDINFO
  19 #define CONFIG_MISC_INIT_R
  20
  21 #define CONFIG_BOOTDELAY        10      /* autoboot after 10 seconds */
  22
  23 #define CONFIG_BAUDRATE         115200
  24
  25 #define CONFIG_TIMESTAMP                /* Print image info with timestamp */
  26 #undef CONFIG_BOOTARGS
  27
  28 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
  29         "addmisc=setenv bootargs ${bootargs} "                          \
  30                 "console=ttyS0,${baudrate} "                            \
  31                 "panic=1\0"                                             \
  32         "bootfile=/tftpboot/vmlinux\0"                                  \
  33         "load=tftp ffffffff80500000 ${u-boot}\0"                        \
  34         ""
  35
  36 #define CONFIG_BOOTCOMMAND      "bootp;bootelf"
  37
  38 /*
  39  * BOOTP options
  40  */
  41 #define CONFIG_BOOTP_BOOTFILESIZE
  42 #define CONFIG_BOOTP_BOOTPATH
  43 #define CONFIG_BOOTP_GATEWAY
  44 #define CONFIG_BOOTP_HOSTNAME
  45
  46 /*
  47  * Command line configuration.
  48  */
  49 #include <config_cmd_default.h>
  50
  51 #define CONFIG_CMD_ELF
  52 #define CONFIG_CMD_FAT
  53 #define CONFIG_CMD_EXT2
  54 #undef CONFIG_CMD_LOADB
  55 #undef CONFIG_CMD_LOADS
  56 #define CONFIG_CMD_DHCP
  57
  58 #define CONFIG_DRIVER_NE2000
  59 #define CONFIG_DRIVER_NE2000_BASE       0xffffffffb4000300
  60
  61 #define CONFIG_SYS_NS16550
  62 #define CONFIG_SYS_NS16550_SERIAL
  63 #define CONFIG_SYS_NS16550_REG_SIZE     1
  64 #define CONFIG_SYS_NS16550_CLK          115200
  65 #define CONFIG_SYS_NS16550_COM1         0xffffffffb40003f8
  66 #define CONFIG_CONS_INDEX               1
  67
  68 #define CONFIG_CMD_IDE
  69 #define CONFIG_DOS_PARTITION
  70
  71 #define CONFIG_SYS_IDE_MAXBUS           2
  72 #define CONFIG_SYS_ATA_IDE0_OFFSET      0x1f0
  73 #define CONFIG_SYS_ATA_IDE1_OFFSET      0x170
  74 #define CONFIG_SYS_ATA_DATA_OFFSET      0
  75 #define CONFIG_SYS_ATA_REG_OFFSET       0
  76 #define CONFIG_SYS_ATA_BASE_ADDR        0xffffffffb4000000
  77
  78 #define CONFIG_SYS_IDE_MAXDEVICE        4
  79
  80 #define CONFIG_CMD_RARP
  81
  82 /*
  83  * Miscellaneous configurable options
  84  */
  85 #define CONFIG_SYS_LONGHELP             /* undef to save memory */
  86
  87 /* Monitor Command Prompt */
  88 #if defined(CONFIG_SYS_LITTLE_ENDIAN)
  89 #define CONFIG_SYS_PROMPT               "qemu-mips64el # "
  90 #else
  91 #define CONFIG_SYS_PROMPT               "qemu-mips64 # "
  92 #endif
  93
  94 #define CONFIG_AUTO_COMPLETE
  95 #define CONFIG_CMDLINE_EDITING
  96 #define CONFIG_SYS_HUSH_PARSER
  97
  98 /* Console I/O Buffer Size */
  99 #define CONFIG_SYS_CBSIZE               256
 100 /* Print Buffer Size */
 101 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
 102 /* max number of command args */
 103 #define CONFIG_SYS_MAXARGS              16
 104
 105 #define CONFIG_SYS_MALLOC_LEN           128*1024
 106
 107 #define CONFIG_SYS_BOOTPARAMS_LEN       128*1024
 108
 109 #define CONFIG_SYS_MHZ                  132
 110
 111 #define CONFIG_SYS_MIPS_TIMER_FREQ      (CONFIG_SYS_MHZ * 1000000)
 112
 113 /* Cached addr */
 114 #define CONFIG_SYS_SDRAM_BASE           0xffffffff80000000
 115
 116 /* default load address */
 117 #define CONFIG_SYS_LOAD_ADDR            0xffffffff81000000
 118
 119 #define CONFIG_SYS_MEMTEST_START        0xffffffff80100000
 120 #define CONFIG_SYS_MEMTEST_END          0xffffffff80800000
 121
 122 /*-----------------------------------------------------------------------
 123  * FLASH and environment organization
 124  */
 125 /* The following #defines are needed to get flash environment right */
 126 #define CONFIG_SYS_TEXT_BASE            0xffffffffbfc00000 /* Rom version */
 127 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
 128 #define CONFIG_SYS_MONITOR_LEN          (192 << 10)
 129
 130 #define CONFIG_SYS_INIT_SP_OFFSET       0x400000
 131
 132 /* We boot from this flash, selected with dip switch */
 133 #define CONFIG_SYS_FLASH_BASE           0xffffffffbfc00000
 134 #define CONFIG_SYS_MAX_FLASH_BANKS      1
 135 #define CONFIG_SYS_MAX_FLASH_SECT       128
 136 #define CONFIG_SYS_FLASH_CFI
 137 #define CONFIG_FLASH_CFI_DRIVER
 138 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 139
 140 #define CONFIG_ENV_IS_IN_FLASH
 141 #define CONFIG_ENV_ADDR         (CONFIG_SYS_FLASH_BASE + CONFIG_SYS_MONITOR_LEN)
 142
 143 /* Address and size of Primary Environment Sector */
 144 #define CONFIG_ENV_SIZE         0x8000
 145
 146 #define CONFIG_ENV_OVERWRITE    1
 147
 148 #define MEM_SIZE                128
 149
 150 #define CONFIG_LZMA
 151
 152 /*-----------------------------------------------------------------------
 153  * Cache Configuration
 154  */
 155 #define CONFIG_SYS_DCACHE_SIZE          16384
 156 #define CONFIG_SYS_ICACHE_SIZE          16384
 157 #define CONFIG_SYS_CACHELINE_SIZE       32
 158
 159 #endif /* __CONFIG_H */