include/configs/qemu-x86.h

   1 /*
   2  * Copyright (C) 2015, Bin Meng <bmeng.cn@gmail.com>
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 /*
   8  * board/config.h - configuration options, board specific
   9  */
  10
  11 #ifndef __CONFIG_H
  12 #define __CONFIG_H
  13
  14 #include <configs/x86-common.h>
  15
  16 #define CONFIG_SYS_MONITOR_LEN          (1 << 20)
  17 #define CONFIG_ARCH_MISC_INIT
  18
  19 #define CONFIG_PCI_MEM_BUS              0xc0000000
  20 #define CONFIG_PCI_MEM_PHYS             CONFIG_PCI_MEM_BUS
  21 #define CONFIG_PCI_MEM_SIZE             0x10000000
  22
  23 #define CONFIG_PCI_PREF_BUS             0xd0000000
  24 #define CONFIG_PCI_PREF_PHYS            CONFIG_PCI_PREF_BUS
  25 #define CONFIG_PCI_PREF_SIZE            0x10000000
  26
  27 #define CONFIG_PCI_IO_BUS               0x2000
  28 #define CONFIG_PCI_IO_PHYS              CONFIG_PCI_IO_BUS
  29 #define CONFIG_PCI_IO_SIZE              0xe000
  30
  31 #define CONFIG_PCI_CONFIG_HOST_BRIDGE
  32 #define CONFIG_PCI_PNP
  33 #define CONFIG_E1000
  34
  35 #define CONFIG_STD_DEVICES_SETTINGS     "stdin=serial,vga\0" \
  36                                         "stdout=serial,vga\0" \
  37                                         "stderr=serial,vga\0"
  38
  39 /*
  40  * ATA/SATA support for QEMU x86 targets
  41  *   - Only legacy IDE controller is supported for QEMU '-M pc' target
  42  *   - AHCI controller is supported for QEMU '-M q35' target
  43  *
  44  * Default configuraion is to support the QEMU default x86 target
  45  * Undefine CONFIG_CMD_IDE to support q35 target
  46  */
  47 #define CONFIG_CMD_IDE
  48 #ifdef CONFIG_CMD_IDE
  49 #define CONFIG_SYS_IDE_MAXBUS           2
  50 #define CONFIG_SYS_IDE_MAXDEVICE        4
  51 #define CONFIG_SYS_ATA_BASE_ADDR        0
  52 #define CONFIG_SYS_ATA_DATA_OFFSET      0
  53 #define CONFIG_SYS_ATA_REG_OFFSET       0
  54 #define CONFIG_SYS_ATA_ALT_OFFSET       0
  55 #define CONFIG_SYS_ATA_IDE0_OFFSET      0x1f0
  56 #define CONFIG_SYS_ATA_IDE1_OFFSET      0x170
  57 #define CONFIG_ATAPI
  58
  59 #undef CONFIG_SCSI_AHCI
  60 #undef CONFIG_CMD_SCSI
  61 #else
  62 #define CONFIG_SCSI_DEV_LIST            \
  63         {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_AHCI}
  64 #endif
  65
  66 /* GPIO is not supported */
  67 #undef CONFIG_INTEL_ICH6_GPIO
  68 #undef CONFIG_CMD_GPIO
  69
  70 /* SPI is not supported */
  71 #undef CONFIG_ICH_SPI
  72 #undef CONFIG_ENV_IS_IN_SPI_FLASH
  73 #define CONFIG_ENV_IS_NOWHERE
  74
  75 #endif  /* __CONFIG_H */