include/configs/r2dplus.h

   1 #ifndef __CONFIG_H
   2 #define __CONFIG_H
   3
   4 #define CONFIG_CPU_SH7751       1
   5 #define CONFIG_CPU_SH_TYPE_R    1
   6 #define CONFIG_R2DPLUS          1
   7 #define __LITTLE_ENDIAN__       1
   8
   9 #define CONFIG_DISPLAY_BOARDINFO
  10
  11 /*
  12  * Command line configuration.
  13  */
  14 #define CONFIG_CMD_PCI
  15 #define CONFIG_CMD_IDE
  16 #define CONFIG_CMD_SH_ZIMAGEBOOT
  17
  18 /* SCIF */
  19 #define CONFIG_SCIF_CONSOLE     1
  20 #define CONFIG_BAUDRATE         115200
  21 #define CONFIG_CONS_SCIF1       1
  22
  23 #define CONFIG_BOOTARGS         "console=ttySC0,115200"
  24 #define CONFIG_ENV_OVERWRITE    1
  25
  26 /* SDRAM */
  27 #define CONFIG_SYS_SDRAM_BASE           0x8C000000
  28 #define CONFIG_SYS_SDRAM_SIZE           0x04000000
  29
  30 #define CONFIG_SYS_TEXT_BASE            0x8FE00000
  31 #define CONFIG_SYS_LONGHELP
  32 #define CONFIG_SYS_CBSIZE               256
  33 #define CONFIG_SYS_PBSIZE               256
  34 #define CONFIG_SYS_MAXARGS              16
  35 #define CONFIG_SYS_BARGSIZE             512
  36
  37 #define CONFIG_SYS_MEMTEST_START        (CONFIG_SYS_SDRAM_BASE)
  38 #define CONFIG_SYS_MEMTEST_END          (CONFIG_SYS_TEXT_BASE - 0x100000)
  39
  40 #define CONFIG_SYS_LOAD_ADDR            (CONFIG_SYS_SDRAM_BASE + 32 * 1024 * 1024)
  41 /* Address of u-boot image in Flash */
  42 #define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE)
  43 #define CONFIG_SYS_MONITOR_LEN          (256 * 1024)
  44 /* Size of DRAM reserved for malloc() use */
  45 #define CONFIG_SYS_MALLOC_LEN           (1024 * 1024)
  46 #define CONFIG_SYS_BOOTMAPSZ            (8 * 1024 * 1024)
  47
  48 /*
  49  * NOR Flash ( Spantion S29GL256P )
  50  */
  51 #define CONFIG_SYS_FLASH_CFI
  52 #define CONFIG_FLASH_CFI_DRIVER
  53 #define CONFIG_SYS_FLASH_BASE           (0xA0000000)
  54 #define CONFIG_SYS_MAX_FLASH_BANKS (1)
  55 #define CONFIG_SYS_MAX_FLASH_SECT  256
  56 #define CONFIG_SYS_FLASH_BANKS_LIST     { CONFIG_SYS_FLASH_BASE }
  57
  58 #define CONFIG_ENV_IS_IN_FLASH
  59 #define CONFIG_ENV_SECT_SIZE    0x40000
  60 #define CONFIG_ENV_SIZE        (CONFIG_ENV_SECT_SIZE)
  61 #define CONFIG_ENV_ADDR        (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
  62
  63 /*
  64  * SuperH Clock setting
  65  */
  66 #define CONFIG_SYS_CLK_FREQ     60000000
  67 #define CONFIG_SH_TMU_CLK_FREQ CONFIG_SYS_CLK_FREQ
  68 #define CONFIG_SH_SCIF_CLK_FREQ CONFIG_SYS_CLK_FREQ
  69 #define CONFIG_SYS_TMU_CLK_DIV          4
  70 #define CONFIG_SYS_PLL_SETTLING_TIME    100/* in us */
  71
  72 /*
  73  * IDE support
  74  */
  75 #define CONFIG_IDE_RESET        1
  76 #define CONFIG_SYS_PIO_MODE             1
  77 #define CONFIG_SYS_IDE_MAXBUS           1 /* IDE bus */
  78 #define CONFIG_SYS_IDE_MAXDEVICE        1
  79 #define CONFIG_SYS_ATA_BASE_ADDR        0xb4000000
  80 #define CONFIG_SYS_ATA_STRIDE           2 /* 1bit shift */
  81 #define CONFIG_SYS_ATA_DATA_OFFSET      0x1000  /* data reg offset */
  82 #define CONFIG_SYS_ATA_REG_OFFSET       0x1000  /* reg offset */
  83 #define CONFIG_SYS_ATA_ALT_OFFSET       0x800   /* alternate register offset */
  84 #define CONFIG_IDE_SWAP_IO
  85
  86 /*
  87  * SuperH PCI Bridge Configration
  88  */
  89 #define CONFIG_SH4_PCI
  90 #define CONFIG_SH7751_PCI
  91 #define CONFIG_PCI_SCAN_SHOW    1
  92 #define __mem_pci
  93
  94 #define CONFIG_PCI_MEM_BUS      0xFD000000      /* Memory space base addr */
  95 #define CONFIG_PCI_MEM_PHYS     CONFIG_PCI_MEM_BUS
  96 #define CONFIG_PCI_MEM_SIZE     0x01000000      /* Size of Memory window */
  97 #define CONFIG_PCI_IO_BUS       0xFE240000      /* IO space base address */
  98 #define CONFIG_PCI_IO_PHYS      CONFIG_PCI_IO_BUS
  99 #define CONFIG_PCI_IO_SIZE      0x00040000      /* Size of IO window */
 100 #define CONFIG_PCI_SYS_BUS      CONFIG_SYS_SDRAM_BASE
 101 #define CONFIG_PCI_SYS_PHYS     CONFIG_SYS_SDRAM_BASE
 102 #define CONFIG_PCI_SYS_SIZE     CONFIG_SYS_SDRAM_SIZE
 103
 104 #endif /* __CONFIG_H */