include/configs/r2dplus.h

   1 #ifndef __CONFIG_H
   2 #define __CONFIG_H
   3
   4 #undef DEBUG
   5
   6 #define CONFIG_SH               1
   7 #define CONFIG_SH4              1
   8 #define CONFIG_CPU_SH7751       1
   9 #define CONFIG_CPU_SH_TYPE_R    1
  10 #define CONFIG_R2DPLUS          1
  11 #define __LITTLE_ENDIAN__       1
  12
  13 /*
  14  * Command line configuration.
  15  */
  16 #include <config_cmd_default.h>
  17
  18 #define CONFIG_CMD_CACHE
  19 #define CONFIG_CMD_FLASH
  20 #define CONFIG_CMD_PCI
  21 #define CONFIG_CMD_NET
  22 #define CONFIG_CMD_PING
  23 #define CONFIG_CMD_IDE
  24 #define CONFIG_CMD_EXT2
  25 #define CONFIG_DOS_PARTITION
  26 #define CONFIG_CMD_SH_ZIMAGEBOOT
  27
  28 /* SCIF */
  29 #define CONFIG_SCIF_CONSOLE     1
  30 #define CONFIG_BAUDRATE         115200
  31 #define CONFIG_CONS_SCIF1       1
  32 #define CONFIG_BOARD_LATE_INIT
  33
  34 #define CONFIG_BOOTDELAY        -1
  35 #define CONFIG_BOOTARGS         "console=ttySC0,115200"
  36 #define CONFIG_ENV_OVERWRITE    1
  37
  38 /* SDRAM */
  39 #define CONFIG_SYS_SDRAM_BASE           (0x8C000000)
  40 #define CONFIG_SYS_SDRAM_SIZE           (0x04000000)
  41
  42 #define CONFIG_SYS_TEXT_BASE    0x0FFC0000
  43 #define CONFIG_SYS_LONGHELP
  44 #define CONFIG_SYS_PROMPT               "=> "
  45 #define CONFIG_SYS_CBSIZE               256
  46 #define CONFIG_SYS_PBSIZE               256
  47 #define CONFIG_SYS_MAXARGS              16
  48 #define CONFIG_SYS_BARGSIZE             512
  49 /* List of legal baudrate settings for this board */
  50 #define CONFIG_SYS_BAUDRATE_TABLE       { 115200, 57600, 38400, 19200, 9600 }
  51
  52 #define CONFIG_SYS_MEMTEST_START        (CONFIG_SYS_SDRAM_BASE)
  53 #define CONFIG_SYS_MEMTEST_END          (CONFIG_SYS_TEXT_BASE - 0x100000)
  54
  55 #define CONFIG_SYS_LOAD_ADDR            (CONFIG_SYS_SDRAM_BASE + 32 * 1024 * 1024)
  56 /* Address of u-boot image in Flash */
  57 #define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE)
  58 #define CONFIG_SYS_MONITOR_LEN          (256 * 1024)
  59 /* Size of DRAM reserved for malloc() use */
  60 #define CONFIG_SYS_MALLOC_LEN           (1024 * 1024)
  61 #define CONFIG_SYS_BOOTMAPSZ            (8 * 1024 * 1024)
  62
  63 /*
  64  * NOR Flash ( Spantion S29GL256P )
  65  */
  66 #define CONFIG_SYS_FLASH_CFI
  67 #define CONFIG_FLASH_CFI_DRIVER
  68 #define CONFIG_SYS_FLASH_BASE           (0xA0000000)
  69 #define CONFIG_SYS_MAX_FLASH_BANKS (1)
  70 #define CONFIG_SYS_MAX_FLASH_SECT  256
  71 #define CONFIG_SYS_FLASH_BANKS_LIST     { CONFIG_SYS_FLASH_BASE }
  72
  73 #define CONFIG_ENV_IS_IN_FLASH
  74 #define CONFIG_ENV_SECT_SIZE    0x40000
  75 #define CONFIG_ENV_SIZE        (CONFIG_ENV_SECT_SIZE)
  76 #define CONFIG_ENV_ADDR        (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
  77
  78 /*
  79  * SuperH Clock setting
  80  */
  81 #define CONFIG_SYS_CLK_FREQ     60000000
  82 #define CONFIG_SYS_TMU_CLK_DIV          4
  83 #define CONFIG_SYS_HZ           1000
  84 #define CONFIG_SYS_PLL_SETTLING_TIME    100/* in us */
  85
  86 /*
  87  * IDE support
  88  */
  89 #define CONFIG_IDE_RESET        1
  90 #define CONFIG_SYS_PIO_MODE             1
  91 #define CONFIG_SYS_IDE_MAXBUS           1 /* IDE bus */
  92 #define CONFIG_SYS_IDE_MAXDEVICE        1
  93 #define CONFIG_SYS_ATA_BASE_ADDR        0xb4000000
  94 #define CONFIG_SYS_ATA_STRIDE           2 /* 1bit shift */
  95 #define CONFIG_SYS_ATA_DATA_OFFSET      0x1000  /* data reg offset */
  96 #define CONFIG_SYS_ATA_REG_OFFSET       0x1000  /* reg offset */
  97 #define CONFIG_SYS_ATA_ALT_OFFSET       0x800   /* alternate register offset */
  98 #define CONFIG_IDE_SWAP_IO
  99
 100 /*
 101  * SuperH PCI Bridge Configration
 102  */
 103 #define CONFIG_PCI
 104 #define CONFIG_SH4_PCI
 105 #define CONFIG_SH7751_PCI
 106 #define CONFIG_PCI_PNP
 107 #define CONFIG_PCI_SCAN_SHOW    1
 108 #define __io
 109 #define __mem_pci
 110
 111 #define CONFIG_PCI_MEM_BUS      0xFD000000      /* Memory space base addr */
 112 #define CONFIG_PCI_MEM_PHYS     CONFIG_PCI_MEM_BUS
 113 #define CONFIG_PCI_MEM_SIZE     0x01000000      /* Size of Memory window */
 114 #define CONFIG_PCI_IO_BUS       0xFE240000      /* IO space base address */
 115 #define CONFIG_PCI_IO_PHYS      CONFIG_PCI_IO_BUS
 116 #define CONFIG_PCI_IO_SIZE      0x00040000      /* Size of IO window */
 117 #define CONFIG_PCI_SYS_BUS      (CONFIG_SYS_SDRAM_BASE & 0x1fffffff)
 118 #define CONFIG_PCI_SYS_PHYS     (CONFIG_SYS_SDRAM_BASE & 0x1fffffff)
 119 #define CONFIG_PCI_SYS_SIZE     CONFIG_SYS_SDRAM_SIZE
 120
 121 /*
 122  * Network device (RTL8139) support
 123  */
 124 #define CONFIG_RTL8139
 125
 126 #endif /* __CONFIG_H */