]> git.ipfire.org Git - people/ms/u-boot.git/blob - include/configs/rk3288_common.h
config: Move CONFIG_BOARD_LATE_INIT to defconfigs
[people/ms/u-boot.git] / include / configs / rk3288_common.h
1 /*
2 * (C) Copyright 2015 Google, Inc
3 *
4 * SPDX-License-Identifier: GPL-2.0+
5 */
6
7 #ifndef __CONFIG_RK3288_COMMON_H
8 #define __CONFIG_RK3288_COMMON_H
9
10 #include <asm/arch/hardware.h>
11 #include "rockchip-common.h"
12
13 #define CONFIG_SKIP_LOWLEVEL_INIT_ONLY
14 #define CONFIG_SYS_NO_FLASH
15 #define CONFIG_NR_DRAM_BANKS 1
16 #define CONFIG_ENV_SIZE 0x2000
17 #define CONFIG_SYS_MAXARGS 16
18 #define CONFIG_BAUDRATE 115200
19 #define CONFIG_SYS_MALLOC_LEN (32 << 20)
20 #define CONFIG_SYS_CBSIZE 1024
21 #define CONFIG_SYS_THUMB_BUILD
22
23 #define CONFIG_SYS_TIMER_RATE (24 * 1000 * 1000)
24 #define CONFIG_SYS_TIMER_BASE 0xff810020 /* TIMER7 */
25 #define CONFIG_SYS_TIMER_COUNTER (CONFIG_SYS_TIMER_BASE + 8)
26
27 #define CONFIG_SPL_FRAMEWORK
28 #define CONFIG_SYS_NS16550_MEM32
29 #define CONFIG_SPL_BOARD_INIT
30
31 #ifdef CONFIG_ROCKCHIP_SPL_BACK_TO_BROM
32 /* Bootrom will load u-boot binary to 0x0 once return from SPL */
33 #define CONFIG_SYS_TEXT_BASE 0x00000000
34 #else
35 #define CONFIG_SYS_TEXT_BASE 0x00100000
36 #endif
37 #define CONFIG_SYS_INIT_SP_ADDR 0x00100000
38 #define CONFIG_SYS_LOAD_ADDR 0x00800800
39 #define CONFIG_SPL_STACK 0xff718000
40 #define CONFIG_SPL_TEXT_BASE 0xff704004
41
42 /* MMC/SD IP block */
43 #define CONFIG_GENERIC_MMC
44 #define CONFIG_BOUNCE_BUFFER
45
46 #define CONFIG_FAT_WRITE
47 #define CONFIG_PARTITION_UUIDS
48 #define CONFIG_CMD_PART
49
50 /* RAW SD card / eMMC locations. */
51 #define CONFIG_SYS_SPI_U_BOOT_OFFS (128 << 10)
52
53 /* FAT sd card locations. */
54 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1
55 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
56
57 #define CONFIG_SYS_SDRAM_BASE 0
58 #define CONFIG_NR_DRAM_BANKS 1
59 #define SDRAM_BANK_SIZE (2UL << 30)
60
61 #define CONFIG_SPI_FLASH
62 #define CONFIG_SPI
63 #define CONFIG_SF_DEFAULT_SPEED 20000000
64
65 #ifndef CONFIG_SPL_BUILD
66 /* usb otg */
67 #define CONFIG_USB_GADGET
68 #define CONFIG_USB_GADGET_DUALSPEED
69 #define CONFIG_USB_GADGET_DWC2_OTG
70 #define CONFIG_ROCKCHIP_USB2_PHY
71 #define CONFIG_USB_GADGET_VBUS_DRAW 0
72
73 /* fastboot */
74 #define CONFIG_CMD_FASTBOOT
75 #define CONFIG_USB_FUNCTION_FASTBOOT
76 #define CONFIG_FASTBOOT_FLASH
77 #define CONFIG_FASTBOOT_FLASH_MMC_DEV 1 /* eMMC */
78 #define CONFIG_FASTBOOT_BUF_ADDR CONFIG_SYS_LOAD_ADDR
79 #define CONFIG_FASTBOOT_BUF_SIZE 0x08000000
80
81 /* usb mass storage */
82 #define CONFIG_USB_FUNCTION_MASS_STORAGE
83 #define CONFIG_CMD_USB_MASS_STORAGE
84
85 #define CONFIG_USB_GADGET_DOWNLOAD
86 #define CONFIG_G_DNL_MANUFACTURER "Rockchip"
87 #define CONFIG_G_DNL_VENDOR_NUM 0x2207
88 #define CONFIG_G_DNL_PRODUCT_NUM 0x320a
89
90 /* usb host support */
91 #ifdef CONFIG_CMD_USB
92 #define CONFIG_USB_DWC2
93 #define CONFIG_USB_HOST_ETHER
94 #define CONFIG_USB_ETHER_SMSC95XX
95 #define CONFIG_USB_ETHER_ASIX
96 #endif
97 #define ENV_MEM_LAYOUT_SETTINGS \
98 "scriptaddr=0x00000000\0" \
99 "pxefile_addr_r=0x00100000\0" \
100 "fdt_addr_r=0x01f00000\0" \
101 "kernel_addr_r=0x02000000\0" \
102 "ramdisk_addr_r=0x04000000\0"
103
104 #include <config_distro_bootcmd.h>
105
106 /* Linux fails to load the fdt if it's loaded above 256M on a Rock 2 board, so
107 * limit the fdt reallocation to that */
108 #define CONFIG_EXTRA_ENV_SETTINGS \
109 "fdt_high=0x0fffffff\0" \
110 "initrd_high=0x0fffffff\0" \
111 "partitions=" PARTS_DEFAULT \
112 ENV_MEM_LAYOUT_SETTINGS \
113 ROCKCHIP_DEVICE_SETTINGS \
114 BOOTENV
115 #endif
116
117 #define CONFIG_PREBOOT
118
119 #endif