include/configs/rsdproto.h

   1 /*
   2  * (C) Copyright 2000
   3  * Murray Jensen <Murray.Jensen@cmst.csiro.au>
   4  *
   5  * (C) Copyright 2000
   6  * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
   7  * Marius Groeger <mgroeger@sysgo.de>
   8  *
   9  * Configuation settings for the R&S Protocol Board board.
  10  *
  11  * See file CREDITS for list of people who contributed to this
  12  * project.
  13  *
  14  * This program is free software; you can redistribute it and/or
  15  * modify it under the terms of the GNU General Public License as
  16  * published by the Free Software Foundation; either version 2 of
  17  * the License, or (at your option) any later version.
  18  *
  19  * This program is distributed in the hope that it will be useful,
  20  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  21  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  22  * GNU General Public License for more details.
  23  *
  24  * You should have received a copy of the GNU General Public License
  25  * along with this program; if not, write to the Free Software
  26  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  27  * MA 02111-1307 USA
  28  */
  29
  30 #ifndef __CONFIG_H
  31 #define __CONFIG_H
  32
  33 /*
  34  * High Level Configuration Options
  35  * (easy to change)
  36  */
  37
  38 #define CONFIG_MPC8260          1       /* This is an MPC8260 CPU       */
  39 #define CONFIG_RSD_PROTO        1       /* on a R&S Protocol Board      */
  40 #define CONFIG_CPM2             1       /* Has a CPM2 */
  41
  42 #define CONFIG_SYS_TEXT_BASE    0xff000000
  43
  44 #define CONFIG_MISC_INIT_F      1       /* Use misc_init_f()            */
  45
  46 /*
  47  * select serial console configuration
  48  *
  49  * if either CONFIG_CONS_ON_SMC or CONFIG_CONS_ON_SCC is selected, then
  50  * CONFIG_CONS_INDEX must be set to the channel number (1-2 for SMC, 1-4
  51  * for SCC).
  52  *
  53  * if CONFIG_CONS_NONE is defined, then the serial console routines must
  54  * defined elsewhere.
  55  */
  56 #undef  CONFIG_CONS_ON_SMC              /* define if console on SMC */
  57 #define CONFIG_CONS_ON_SCC              /* define if console on SCC */
  58 #undef  CONFIG_CONS_NONE                /* define if console on neither */
  59 #define CONFIG_CONS_INDEX       1       /* which SMC/SCC channel for console */
  60
  61 /*
  62  * select ethernet configuration
  63  *
  64  * if either CONFIG_ETHER_ON_SCC or CONFIG_ETHER_ON_FCC is selected, then
  65  * CONFIG_ETHER_INDEX must be set to the channel number (1-4 for SCC, 1-3
  66  * for FCC)
  67  *
  68  * if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be
  69  * defined elsewhere (as for the console), or CONFIG_CMD_NET must be unset.
  70  */
  71 #undef  CONFIG_ETHER_ON_SCC             /* define if ethernet on SCC    */
  72 #define CONFIG_ETHER_ON_FCC             /* define if ethernet on FCC    */
  73 #undef  CONFIG_ETHER_NONE               /* define if ethernet on neither */
  74 #define CONFIG_ETHER_INDEX      2       /* which SCC/FCC channel for ethernet */
  75
  76 #if (CONFIG_ETHER_INDEX == 2)
  77
  78 /*
  79  * - Rx-CLK is CLK13
  80  * - Tx-CLK is CLK14
  81  * - Select bus for bd/buffers (see 28-13)
  82  * - Enable Full Duplex in FSMR
  83  */
  84 # define CONFIG_SYS_CMXFCR_MASK (CMXFCR_FC2 | CMXFCR_RF2CS_MSK | CMXFCR_TF2CS_MSK)
  85 # define CONFIG_SYS_CMXFCR_VALUE        (CMXFCR_RF2CS_CLK13 | CMXFCR_TF2CS_CLK14)
  86 # define CONFIG_SYS_CPMFCR_RAMTYPE      (0)
  87 # define CONFIG_SYS_FCC_PSMR            (FCC_PSMR_FDE | FCC_PSMR_LPB)
  88
  89 #endif /* CONFIG_ETHER_INDEX */
  90
  91
  92 /* allow to overwrite serial and ethaddr */
  93 #define CONFIG_ENV_OVERWRITE
  94
  95 /* enable I2C */
  96 #define CONFIG_HARD_I2C         1       /* I2C with hardware support */
  97 #define CONFIG_SYS_I2C_SPEED            50000   /* I2C speed and slave address */
  98 #define CONFIG_SYS_I2C_SLAVE            0x30
  99
 100
 101 /* system clock rate (CLKIN) - equal to the 60x and local bus speed */
 102 #define CONFIG_8260_CLKIN       50000000        /* in Hz */
 103
 104 #define CONFIG_BAUDRATE         115200
 105
 106
 107 /*
 108  * BOOTP options
 109  */
 110 #define CONFIG_BOOTP_BOOTFILESIZE
 111 #define CONFIG_BOOTP_BOOTPATH
 112 #define CONFIG_BOOTP_GATEWAY
 113 #define CONFIG_BOOTP_HOSTNAME
 114
 115
 116 /*
 117  * Command line configuration.
 118  */
 119 #include <config_cmd_default.h>
 120
 121 #undef CONFIG_CMD_KGDB
 122
 123
 124 /* Define this if you want to boot from 0x00000100. If you don't define
 125  * this, you will need to program the bootloader to 0xfff00000, and
 126  * get the hardware reset config words at 0xfe000000. The simplest
 127  * way to do that is to program the bootloader at both addresses.
 128  * It is suggested that you just let U-Boot live at 0x00000000.
 129  */
 130 #define CONFIG_SYS_RSD_BOOT_LOW 1
 131
 132 #define CONFIG_BOOTDELAY        5
 133 #define CONFIG_BOOTARGS         "devfs=mount root=ramfs"
 134 #define CONFIG_ETHADDR          08:00:3e:26:0a:5a
 135 #define CONFIG_NETMASK          255.255.0.0
 136
 137 #if defined(CONFIG_CMD_KGDB)
 138 #define CONFIG_KGDB_BAUDRATE    230400          /* speed to run kgdb serial port */
 139 #define CONFIG_KGDB_SER_INDEX   2               /* which serial port to use */
 140 #endif
 141
 142 /*
 143  * Miscellaneous configurable options
 144  */
 145 #define CONFIG_SYS_LONGHELP                             /* undef to save memory         */
 146 #define CONFIG_SYS_PROMPT               "=> "           /* Monitor Command Prompt       */
 147 #if defined(CONFIG_CMD_KGDB)
 148 #define CONFIG_SYS_CBSIZE               1024            /* Console I/O Buffer Size      */
 149 #else
 150 #define CONFIG_SYS_CBSIZE               256             /* Console I/O Buffer Size      */
 151 #endif
 152 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
 153 #define CONFIG_SYS_MAXARGS              16              /* max number of command args   */
 154 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE       /* Boot Argument Buffer Size    */
 155
 156 #define CONFIG_SYS_MEMTEST_START        0x00400000      /* memtest works on     */
 157 #define CONFIG_SYS_MEMTEST_END          0x01c00000      /* 4 ... 28 MB in DRAM  */
 158
 159 #define CONFIG_SYS_LOAD_ADDR            0x100000        /* default load address */
 160
 161 #define CONFIG_SYS_HZ                   1000            /* decrementer freq: 1 ms ticks */
 162
 163                                                 /* valid baudrates */
 164 #define CONFIG_SYS_BAUDRATE_TABLE       { 9600, 19200, 38400, 57600, 115200 }
 165
 166 /*
 167  * Low Level Configuration Settings
 168  * (address mappings, register initial values, etc.)
 169  * You should know what you are doing if you make changes here.
 170  */
 171
 172 /*-----------------------------------------------------------------------
 173  * Physical Memory Map
 174  */
 175 #define PHYS_SDRAM_60X          0x00000000 /* SDRAM (60x Bus) */
 176 #define PHYS_SDRAM_60X_SIZE     0x08000000 /* 128 MB */
 177
 178 #define PHYS_SDRAM_LOCAL        0x40000000 /* SDRAM (Local Bus) */
 179 #define PHYS_SDRAM_LOCAL_SIZE   0x04000000 /* 64 MB */
 180
 181 #define PHYS_DPRAM_PCI          0xE8000000 /* DPRAM PPC/PCI */
 182 #define PHYS_DPRAM_PCI_SIZE     0x00020000 /* 128 KB */
 183
 184 /*#define PHYS_DPRAM_PCI_SEM    0x04020000 / * DPRAM PPC/PCI Semaphore */
 185 /*#define PHYS_DPRAM_PCI_SEM_SIZE       0x00000001 / * 1 Byte */
 186
 187 #define PHYS_DPRAM_SHARC        0xE8100000 /* DPRAM PPC/Sharc */
 188 #define PHYS_DPRAM_SHARC_SIZE   0x00040000 /* 256 KB */
 189
 190 /*#define PHYS_DPRAM_SHARC_SEM  0x04140000 / * DPRAM PPC/Sharc Semaphore */
 191 /*#define PHYS_DPRAM_SHARC_SEM_SIZE 0x00000001 / * 1 Byte */
 192
 193 #define PHYS_VIRTEX_REGISTER    0xE8300000 /* FPGA implemented register */
 194 #define PHYS_VIRTEX_REGISTER_SIZE 0x00000100
 195
 196 #define PHYS_USB                0x04200000 /* USB Controller (60x Bus) */
 197 #define PHYS_USB_SIZE           0x00000002 /* 2 Bytes */
 198
 199 #define PHYS_IMMR               0xF0000000 /* Internal Memory Mapped Reg. */
 200
 201 #define PHYS_FLASH              0xFF000000 /* Flash (60x Bus) */
 202 #define PHYS_FLASH_SIZE         0x01000000 /* 16 MB */
 203
 204 #define CONFIG_SYS_IMMR         PHYS_IMMR
 205
 206 /*-----------------------------------------------------------------------
 207  * Reset Address
 208  *
 209  * In order to reset the CPU, U-Boot jumps to a special address which
 210  * causes a machine check exception. The default address for this is
 211  * CONFIG_SYS_MONITOR_BASE - sizeof (ulong), which might not always work, eg. when
 212  * testing the monitor in RAM using a JTAG debugger.
 213  *
 214  * Just set CONFIG_SYS_RESET_ADDRESS to an address that you know is sure to
 215  * cause a bus error on your hardware.
 216  */
 217 #define CONFIG_SYS_RESET_ADDRESS        0x20000000
 218
 219 /*-----------------------------------------------------------------------
 220  * Hard Reset Configuration Words
 221  */
 222
 223 #if defined(CONFIG_SYS_RSD_BOOT_LOW)
 224 #  define  CONFIG_SYS_RSD_HRCW_BOOT_FLAGS  (HRCW_CIP | HRCW_BMS)
 225 #else
 226 #  define  CONFIG_SYS_RSD_HRCW_BOOT_FLAGS  (0)
 227 #endif /* defined(CONFIG_SYS_RSD_BOOT_LOW) */
 228
 229 /* get the HRCW ISB field from CONFIG_SYS_IMMR */
 230 #define CONFIG_SYS_RSD_HRCW_IMMR ( ((CONFIG_SYS_IMMR & 0x10000000) >> 10) |\
 231                             ((CONFIG_SYS_IMMR & 0x01000000) >> 7)  |\
 232                             ((CONFIG_SYS_IMMR & 0x00100000) >> 4) )
 233
 234 #define CONFIG_SYS_HRCW_MASTER  (HRCW_L2CPC10 | \
 235                          HRCW_DPPC11 | \
 236                          CONFIG_SYS_RSD_HRCW_IMMR |\
 237                          HRCW_MMR00 | \
 238                          HRCW_APPC10 | \
 239                          HRCW_CS10PC00 | \
 240                          HRCW_MODCK_H0000 |\
 241                          CONFIG_SYS_RSD_HRCW_BOOT_FLAGS)
 242
 243 /* no slaves */
 244 #define CONFIG_SYS_HRCW_SLAVE1  0
 245 #define CONFIG_SYS_HRCW_SLAVE2  0
 246 #define CONFIG_SYS_HRCW_SLAVE3  0
 247 #define CONFIG_SYS_HRCW_SLAVE4  0
 248 #define CONFIG_SYS_HRCW_SLAVE5  0
 249 #define CONFIG_SYS_HRCW_SLAVE6  0
 250 #define CONFIG_SYS_HRCW_SLAVE7  0
 251
 252 /*-----------------------------------------------------------------------
 253  * Definitions for initial stack pointer and data area (in DPRAM)
 254  */
 255 #define CONFIG_SYS_INIT_RAM_ADDR        CONFIG_SYS_IMMR
 256 #define CONFIG_SYS_INIT_RAM_END 0x4000  /* End of used area in DPRAM    */
 257 #define CONFIG_SYS_GBL_DATA_SIZE        128  /* size in bytes reserved for initial data */
 258 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
 259 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 260
 261 /*-----------------------------------------------------------------------
 262  * Start addresses for the final memory configuration
 263  * (Set up by the startup code)
 264  * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
 265  * Note also that the logic that sets CONFIG_SYS_RAMBOOT is platform dependend.
 266  */
 267 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM_60X
 268 #define CONFIG_SYS_FLASH_BASE           PHYS_FLASH
 269 /*#define       CONFIG_SYS_MONITOR_BASE 0x200000 */
 270 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
 271 #if CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE
 272 #define CONFIG_SYS_RAMBOOT
 273 #endif
 274 #define CONFIG_SYS_MONITOR_LEN          (160 << 10)     /* Reserve 160 kB for Monitor   */
 275 #define CONFIG_SYS_MALLOC_LEN           (128 << 10)     /* Reserve 128 kB for malloc()  */
 276
 277 /*
 278  * For booting Linux, the board info and command line data
 279  * have to be in the first 8 MB of memory, since this is
 280  * the maximum mapped by the Linux kernel during initialization.
 281  */
 282 #define CONFIG_SYS_BOOTMAPSZ            (8 << 20)       /* Initial Memory map for Linux */
 283
 284 /*-----------------------------------------------------------------------
 285  * FLASH and environment organization
 286  */
 287 #define CONFIG_SYS_MAX_FLASH_BANKS      2       /* max number of memory banks           */
 288 #define CONFIG_SYS_MAX_FLASH_SECT       63      /* max number of sectors on one chip    */
 289
 290 #define CONFIG_SYS_FLASH_ERASE_TOUT     12000   /* Timeout for Flash Erase (in ms)      */
 291 #define CONFIG_SYS_FLASH_WRITE_TOUT     3000    /* Timeout for Flash Write (in ms)      */
 292
 293 /* turn off NVRAM env feature */
 294 #undef CONFIG_NVRAM_ENV
 295
 296 #define CONFIG_ENV_IS_IN_FLASH  1
 297 #define CONFIG_ENV_ADDR (PHYS_FLASH + 0x28000)  /* Addr of Environment Sector   */
 298 #define CONFIG_ENV_SECT_SIZE    0x8000  /* Total Size of Environment Sector     */
 299
 300 /*-----------------------------------------------------------------------
 301  * Cache Configuration
 302  */
 303 #define CONFIG_SYS_CACHELINE_SIZE       32      /* For MPC8260 CPU                      */
 304 #if defined(CONFIG_CMD_KGDB)
 305 #define CONFIG_SYS_CACHELINE_SHIFT      5       /* log base 2 of the above value        */
 306 #endif
 307
 308 /*-----------------------------------------------------------------------
 309  * HIDx - Hardware Implementation-dependent Registers                    2-11
 310  *-----------------------------------------------------------------------
 311  * HID0 also contains cache control - initially enable both caches and
 312  * invalidate contents, then the final state leaves only the instruction
 313  * cache enabled. Note that Power-On and Hard reset invalidate the caches,
 314  * but Soft reset does not.
 315  *
 316  * HID1 has only read-only information - nothing to set.
 317  */
 318 #define CONFIG_SYS_HID0_INIT    (HID0_ICE|HID0_DCE|HID0_ICFI|HID0_DCI|HID0_IFEM|HID0_ABE)
 319 #define CONFIG_SYS_HID0_FINAL   (HID0_ICE|HID0_IFEM|HID0_ABE|HID0_EMCP)
 320 #define CONFIG_SYS_HID2 0
 321
 322 /*-----------------------------------------------------------------------
 323  * RMR - Reset Mode Register
 324  *-----------------------------------------------------------------------
 325  */
 326 #define CONFIG_SYS_RMR          0
 327
 328 /*-----------------------------------------------------------------------
 329  * BCR - Bus Configuration                                       4-25
 330  *-----------------------------------------------------------------------
 331  */
 332 #define CONFIG_SYS_BCR          0x100c0000
 333
 334 /*-----------------------------------------------------------------------
 335  * SIUMCR - SIU Module Configuration                             4-31
 336  *-----------------------------------------------------------------------
 337  */
 338
 339 #define CONFIG_SYS_SIUMCR       (SIUMCR_DPPC11 | SIUMCR_L2CPC10 | SIUMCR_APPC10 | \
 340                                          SIUMCR_CS10PC01 | SIUMCR_BCTLC01)
 341
 342 /*-----------------------------------------------------------------------
 343  * SYPCR - System Protection Control                            11-9
 344  * SYPCR can only be written once after reset!
 345  *-----------------------------------------------------------------------
 346  * Watchdog & Bus Monitor Timer max, 60x Bus Monitor enable
 347  */
 348 #define CONFIG_SYS_SYPCR        (SYPCR_SWTC | SYPCR_BMT | SYPCR_PBME | SYPCR_LBME | \
 349                          SYPCR_SWRI | SYPCR_SWP)
 350
 351 /*-----------------------------------------------------------------------
 352  * TMCNTSC - Time Counter Status and Control                     4-40
 353  *-----------------------------------------------------------------------
 354  * Clear once per Second and Alarm Interrupt Status, Set 32KHz timersclk,
 355  * and enable Time Counter
 356  */
 357 #define CONFIG_SYS_TMCNTSC      (TMCNTSC_SEC | TMCNTSC_ALR | TMCNTSC_TCF | TMCNTSC_TCE)
 358
 359 /*-----------------------------------------------------------------------
 360  * PISCR - Periodic Interrupt Status and Control                 4-42
 361  *-----------------------------------------------------------------------
 362  * Clear Periodic Interrupt Status, Set 32KHz timersclk, and enable
 363  * Periodic timer
 364  */
 365 #define CONFIG_SYS_PISCR        (PISCR_PS|PISCR_PTF|PISCR_PTE)
 366
 367 /*-----------------------------------------------------------------------
 368  * SCCR - System Clock Control                                   9-8
 369  *-----------------------------------------------------------------------
 370  */
 371 #define CONFIG_SYS_SCCR 0x00000000
 372
 373 /*-----------------------------------------------------------------------
 374  * RCCR - RISC Controller Configuration                         13-7
 375  *-----------------------------------------------------------------------
 376  */
 377 #define CONFIG_SYS_RCCR 0
 378
 379 /*
 380  * Init Memory Controller:
 381  */
 382
 383 #define CONFIG_SYS_PSDMR        0x494D2452
 384 #define CONFIG_SYS_LSDMR        0x49492552
 385
 386 /* Flash */
 387 #define CONFIG_SYS_BR0_PRELIM   (PHYS_FLASH | BRx_V)
 388 #define CONFIG_SYS_OR0_PRELIM   (P2SZ_TO_AM(PHYS_FLASH_SIZE) | \
 389                          ORxG_BCTLD | \
 390                          ORxG_SCY_5_CLK)
 391
 392 /* DPRAM to the PCI BUS on the protocol board */
 393 #define CONFIG_SYS_BR1_PRELIM   (PHYS_DPRAM_PCI | BRx_V)
 394 #define CONFIG_SYS_OR1_PRELIM   (P2SZ_TO_AM(PHYS_DPRAM_PCI_SIZE) | \
 395                          ORxG_ACS_DIV4)
 396
 397 /* 60x Bus SDRAM */
 398 #define CONFIG_SYS_BR2_PRELIM   (PHYS_SDRAM_60X | BRx_MS_SDRAM_P | BRx_V)
 399 #define CONFIG_SYS_OR2_PRELIM   (ORxS_SIZE_TO_AM(PHYS_SDRAM_60X_SIZE) | \
 400                          ORxS_BPD_4 | \
 401                          ORxS_ROWST_PBI1_A2 | \
 402                          ORxS_NUMR_13 | \
 403                          ORxS_IBID)
 404
 405 /* Virtex-FPGA - Register */
 406 #define CONFIG_SYS_BR3_PRELIM  (PHYS_VIRTEX_REGISTER | BRx_V)
 407 #define CONFIG_SYS_OR3_PRELIM  (ORxS_SIZE_TO_AM(PHYS_VIRTEX_REGISTER_SIZE) | \
 408                          ORxG_SCY_1_CLK | \
 409                          ORxG_ACS_DIV2 | \
 410                          ORxG_CSNT )
 411
 412 /* local bus SDRAM */
 413 #define CONFIG_SYS_BR4_PRELIM   (PHYS_SDRAM_LOCAL | BRx_PS_32 | BRx_MS_SDRAM_L | BRx_V)
 414 #define CONFIG_SYS_OR4_PRELIM   (ORxS_SIZE_TO_AM(PHYS_SDRAM_LOCAL_SIZE) | \
 415                          ORxS_BPD_4 | \
 416                          ORxS_ROWST_PBI1_A4 | \
 417                          ORxS_NUMR_13)
 418
 419 /* DPRAM to the Sharc-Bus on the protocol board */
 420 #define CONFIG_SYS_BR5_PRELIM   (PHYS_DPRAM_SHARC | BRx_V)
 421 #define CONFIG_SYS_OR5_PRELIM   (P2SZ_TO_AM(PHYS_DPRAM_SHARC_SIZE) | \
 422                          ORxG_ACS_DIV4)
 423
 424 #endif  /* __CONFIG_H */