include/configs/s32v234evb.h

   1 /*
   2  * (C) Copyright 2015-2016 Freescale Semiconductor, Inc.
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  *
   6  * Configuration settings for the Freescale S32V234 EVB board.
   7  */
   8
   9 #ifndef __CONFIG_H
  10 #define __CONFIG_H
  11
  12 #ifndef CONFIG_SPL_BUILD
  13 #include <config_distro_defaults.h>
  14 #endif
  15
  16 #include <asm/arch/imx-regs.h>
  17
  18 #define CONFIG_S32V234
  19 #define CONFIG_DM
  20
  21 /* Config GIC */
  22 #define CONFIG_GICV2
  23 #define GICD_BASE 0x7D001000
  24 #define GICC_BASE 0x7D002000
  25
  26 #define CONFIG_REMAKE_ELF
  27 #undef CONFIG_RUN_FROM_IRAM_ONLY
  28
  29 #define CONFIG_RUN_FROM_DDR1
  30 #undef CONFIG_RUN_FROM_DDR0
  31
  32 /* Run by default from DDR1  */
  33 #ifdef CONFIG_RUN_FROM_DDR0
  34 #define DDR_BASE_ADDR           0x80000000
  35 #else
  36 #define DDR_BASE_ADDR           0xC0000000
  37 #endif
  38
  39 #define CONFIG_MACH_TYPE                4146
  40
  41 #define CONFIG_SKIP_LOWLEVEL_INIT
  42
  43 /* Config CACHE */
  44 #define CONFIG_CMD_CACHE
  45
  46 #define CONFIG_SYS_FULL_VA
  47
  48 /* Enable passing of ATAGs */
  49 #define CONFIG_CMDLINE_TAG
  50
  51 /* SMP Spin Table Definitions */
  52 #define CPU_RELEASE_ADDR                (CONFIG_SYS_SDRAM_BASE + 0x7fff0)
  53
  54 /* Generic Timer Definitions */
  55 #define COUNTER_FREQUENCY               (1000000000)    /* 1000MHz */
  56 #define CONFIG_SYS_FSL_ERRATUM_A008585
  57
  58 /* Size of malloc() pool */
  59 #ifdef CONFIG_RUN_FROM_IRAM_ONLY
  60 #define CONFIG_SYS_MALLOC_LEN           (CONFIG_ENV_SIZE + 1 * 1024 * 1024)
  61 #else
  62 #define CONFIG_SYS_MALLOC_LEN           (CONFIG_ENV_SIZE + 2 * 1024 * 1024)
  63 #endif
  64
  65 #define CONFIG_DM_SERIAL
  66 #define CONFIG_FSL_LINFLEXUART
  67 #define LINFLEXUART_BASE                LINFLEXD0_BASE_ADDR
  68
  69 #define CONFIG_DEBUG_UART_LINFLEXUART
  70 #define CONFIG_DEBUG_UART_BASE          LINFLEXUART_BASE
  71
  72 /* Allow to overwrite serial and ethaddr */
  73 #define CONFIG_ENV_OVERWRITE
  74 #define CONFIG_SYS_UART_PORT            (1)
  75
  76 #undef CONFIG_CMD_IMLS
  77
  78 #define CONFIG_FSL_ESDHC
  79 #define CONFIG_FSL_USDHC
  80 #define CONFIG_SYS_FSL_ESDHC_ADDR       USDHC_BASE_ADDR
  81 #define CONFIG_SYS_FSL_ESDHC_NUM        1
  82
  83 #define CONFIG_CMD_MMC
  84 /* #define CONFIG_CMD_EXT2 EXT2 Support */
  85
  86 #if 0
  87
  88 /* Ethernet config */
  89 #define CONFIG_CMD_PING
  90 #define CONFIG_CMD_MII
  91 #define CONFIG_FEC_MXC
  92 #define CONFIG_MII
  93 #define IMX_FEC_BASE            ENET_BASE_ADDR
  94 #define CONFIG_FEC_XCV_TYPE     RMII
  95 #define CONFIG_FEC_MXC_PHYADDR  0
  96 #define CONFIG_PHYLIB
  97 #define CONFIG_PHY_MICREL
  98 #endif
  99
 100 #if 0                           /* Disable until the I2C driver will be updated */
 101
 102 /* I2C Configs */
 103 #define CONFIG_CMD_I2C
 104 #define CONFIG_HARD_I2C
 105 #define CONFIG_I2C_MXC
 106 #define CONFIG_SYS_I2C_BASE             I2C0_BASE_ADDR
 107 #define CONFIG_SYS_I2C_SPEED            100000
 108 #endif
 109
 110 #if 0                           /* Disable until the FLASH will be implemented */
 111 #define CONFIG_SYS_USE_NAND
 112 #endif
 113
 114 #ifdef CONFIG_SYS_USE_NAND
 115 /* Nand Flash Configs */
 116 #define CONFIG_CMD_NAND
 117 #define CONFIG_JFFS2_NAND
 118 #define MTD_NAND_FSL_NFC_SWECC 1
 119 #define CONFIG_NAND_FSL_NFC
 120 #define CONFIG_SYS_NAND_BASE            0x400E0000
 121 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 122 #define NAND_MAX_CHIPS                  CONFIG_SYS_MAX_NAND_DEVICE
 123 #define CONFIG_SYS_NAND_SELECT_DEVICE
 124 #define CONFIG_SYS_64BIT_VSPRINTF       /* needed for nand_util.c */
 125 #endif
 126
 127 #define CONFIG_LOADADDR                 0xC307FFC0
 128 #define CONFIG_BOOTARGS                 "console=ttyLF0 root=/dev/ram rw"
 129
 130 #define CONFIG_CMD_ENV
 131 #define CONFIG_EXTRA_ENV_SETTINGS \
 132         "boot_scripts=boot.scr.uimg boot.scr\0" \
 133         "scriptaddr=" __stringify(CONFIG_LOADADDR) "\0" \
 134         "console=ttyLF0,115200\0" \
 135         "fdt_file=s32v234-evb.dtb\0" \
 136         "fdt_high=0xffffffff\0" \
 137         "initrd_high=0xffffffff\0" \
 138         "fdt_addr_r=0xC2000000\0" \
 139         "kernel_addr_r=0xC307FFC0\0" \
 140         "ramdisk_addr_r=0xC4000000\0" \
 141         "ramdisk=rootfs.uimg\0"\
 142         "ip_dyn=yes\0" \
 143         "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
 144         "update_sd_firmware_filename=u-boot.imx\0" \
 145         "update_sd_firmware=" \
 146                 "if test ${ip_dyn} = yes; then " \
 147                         "setenv get_cmd dhcp; " \
 148                 "else " \
 149                         "setenv get_cmd tftp; " \
 150                 "fi; " \
 151                 "if mmc dev ${mmcdev}; then "   \
 152                         "if ${get_cmd} ${update_sd_firmware_filename}; then " \
 153                                 "setexpr fw_sz ${filesize} / 0x200; " \
 154                                 "setexpr fw_sz ${fw_sz} + 1; "  \
 155                                 "mmc write ${loadaddr} 0x2 ${fw_sz}; " \
 156                         "fi; "  \
 157                 "fi\0" \
 158         "loadramdisk=fatload mmc ${mmcdev}:${mmcpart} ${ramdisk_addr} ${ramdisk}\0" \
 159         "jtagboot=echo Booting using jtag...; " \
 160                 "bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0" \
 161         "jtagsdboot=echo Booting loading Linux with ramdisk from SD...; " \
 162                 "run loaduimage; run loadramdisk; run loadfdt;"\
 163                 "bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0" \
 164         "boot_net_usb_start=true\0" \
 165         BOOTENV
 166
 167 #define BOOT_TARGET_DEVICES(func) \
 168         func(MMC, mmc, 1) \
 169         func(MMC, mmc, 0) \
 170         func(DHCP, dhcp, na)
 171
 172 #define CONFIG_BOOTCOMMAND \
 173         "run distro_bootcmd"
 174
 175 #include <config_distro_bootcmd.h>
 176
 177 /* Miscellaneous configurable options */
 178 #define CONFIG_SYS_LONGHELP     /* undef to save memory */
 179 #define CONFIG_SYS_PROMPT_HUSH_PS2      "> "
 180 #define CONFIG_SYS_PROMPT               "=> "
 181 #undef CONFIG_AUTO_COMPLETE
 182 #define CONFIG_SYS_CBSIZE               256     /* Console I/O Buffer Size */
 183 #define CONFIG_SYS_PBSIZE               \
 184                         (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 185 #define CONFIG_SYS_MAXARGS              16      /* max number of command args */
 186 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE
 187 #define CONFIG_CMDLINE_EDITING
 188
 189 #define CONFIG_CMD_MEMTEST
 190 #define CONFIG_SYS_MEMTEST_START        (DDR_BASE_ADDR)
 191 #define CONFIG_SYS_MEMTEST_END          (DDR_BASE_ADDR + 0x7C00000)
 192
 193 #define CONFIG_SYS_LOAD_ADDR            CONFIG_LOADADDR
 194 #define CONFIG_SYS_HZ                           1000
 195
 196 #define CONFIG_SYS_TEXT_BASE            0x3E800000      /* SDRAM */
 197
 198 #ifdef CONFIG_RUN_FROM_IRAM_ONLY
 199 #define CONFIG_SYS_MALLOC_BASE          (DDR_BASE_ADDR)
 200 #endif
 201
 202 #if 0
 203 /* Configure PXE */
 204 #define CONFIG_BOOTP_PXE
 205 #define CONFIG_BOOTP_PXE_CLIENTARCH     0x100
 206 #endif
 207
 208 /* Physical memory map */
 209 /* EVB board has 2x256 MB DDR chips, DDR0 and DDR1, u-boot is using just one */
 210 #define CONFIG_NR_DRAM_BANKS            1
 211 #define PHYS_SDRAM                      (DDR_BASE_ADDR)
 212 #define PHYS_SDRAM_SIZE                 (256 * 1024 * 1024)
 213
 214 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
 215 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
 216 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
 217
 218 #define CONFIG_SYS_INIT_SP_OFFSET \
 219         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 220 #define CONFIG_SYS_INIT_SP_ADDR \
 221         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 222
 223 /* environment organization */
 224 #define CONFIG_ENV_SIZE                 (8 * 1024)
 225 #define CONFIG_ENV_IS_IN_MMC
 226
 227 #define CONFIG_ENV_OFFSET               (12 * 64 * 1024)
 228 #define CONFIG_SYS_MMC_ENV_DEV          0
 229
 230
 231 #define CONFIG_BOOTP_BOOTFILESIZE
 232 #define CONFIG_BOOTP_BOOTPATH
 233 #define CONFIG_BOOTP_GATEWAY
 234 #define CONFIG_BOOTP_HOSTNAME
 235
 236 #endif