include/configs/salvator-x.h

   1 /*
   2  * include/configs/salvator-x.h
   3  *     This file is Salvator-X board configuration.
   4  *
   5  * Copyright (C) 2015 Renesas Electronics Corporation
   6  *
   7  * SPDX-License-Identifier: GPL-2.0+
   8  */
   9
  10 #ifndef __SALVATOR_X_H
  11 #define __SALVATOR_X_H
  12
  13 #undef DEBUG
  14
  15 #define CONFIG_RCAR_BOARD_STRING "Salvator-X"
  16
  17 #include "rcar-gen3-common.h"
  18
  19 /* SCIF */
  20 #define CONFIG_SCIF_CONSOLE
  21 #define CONFIG_CONS_SCIF2
  22 #define CONFIG_CONS_INDEX       2
  23 #define CONFIG_SH_SCIF_CLK_FREQ        CONFIG_S3D4_CLK_FREQ
  24
  25 /* [A] Hyper Flash */
  26 /* use to RPC(SPI Multi I/O Bus Controller) */
  27
  28 /* Ethernet RAVB */
  29 #define CONFIG_NET_MULTI
  30 #define CONFIG_PHY_MICREL
  31 #define CONFIG_BITBANGMII
  32 #define CONFIG_BITBANGMII_MULTI
  33
  34 /* Board Clock */
  35 /* XTAL_CLK : 33.33MHz */
  36 #define RCAR_XTAL_CLK           33333333u
  37 #define CONFIG_SYS_CLK_FREQ     RCAR_XTAL_CLK
  38 /* ch0to2 CPclk, ch3to11 S3D2_PEREclk, ch12to14 S3D2_RTclk */
  39 /* CPclk 16.66MHz, S3D2 133.33MHz , S3D4 66.66MHz          */
  40 #define CONFIG_CP_CLK_FREQ      (CONFIG_SYS_CLK_FREQ / 2)
  41 #define CONFIG_PLL1_CLK_FREQ    (CONFIG_SYS_CLK_FREQ * 192 / 2)
  42 #define CONFIG_S3D2_CLK_FREQ    (266666666u/2)
  43 #define CONFIG_S3D4_CLK_FREQ    (266666666u/4)
  44
  45 /* Generic Timer Definitions (use in assembler source) */
  46 #define COUNTER_FREQUENCY       0xFE502A        /* 16.66MHz from CPclk */
  47
  48 /* Generic Interrupt Controller Definitions */
  49 #define CONFIG_GICV2
  50 #define GICD_BASE       0xF1010000
  51 #define GICC_BASE       0xF1020000
  52
  53 /* i2c */
  54 #define CONFIG_SYS_I2C
  55 #define CONFIG_SYS_I2C_SH
  56 #define CONFIG_SYS_I2C_SLAVE            0x60
  57 #define CONFIG_SYS_I2C_SH_NUM_CONTROLLERS       1
  58 #define CONFIG_SYS_I2C_SH_SPEED0        400000
  59 #define CONFIG_SH_I2C_DATA_HIGH         4
  60 #define CONFIG_SH_I2C_DATA_LOW          5
  61 #define CONFIG_SH_I2C_CLOCK             10000000
  62
  63 #define CONFIG_SYS_I2C_POWERIC_ADDR     0x30
  64
  65 /* USB */
  66 #ifdef CONFIG_R8A7795
  67 #define CONFIG_USB_MAX_CONTROLLER_COUNT 3
  68 #else
  69 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
  70 #endif
  71
  72 /* SDHI */
  73 #define CONFIG_SH_SDHI_FREQ             200000000
  74
  75 /* Environment in eMMC, at the end of 2nd "boot sector" */
  76 #define CONFIG_ENV_IS_IN_MMC
  77 #define CONFIG_ENV_OFFSET               (-CONFIG_ENV_SIZE)
  78 #define CONFIG_SYS_MMC_ENV_DEV          1
  79 #define CONFIG_SYS_MMC_ENV_PART         2
  80
  81 /* Module stop status bits */
  82 /* MFIS, SCIF1 */
  83 #define CONFIG_SMSTP2_ENA       0x00002040
  84 /* SCIF2 */
  85 #define CONFIG_SMSTP3_ENA       0x00000400
  86 /* INTC-AP, IRQC */
  87 #define CONFIG_SMSTP4_ENA       0x00000180
  88
  89 #endif /* __SALVATOR_X_H */