include/configs/salvator-x.h

   1 /*
   2  * include/configs/salvator-x.h
   3  *     This file is Salvator-X board configuration.
   4  *
   5  * Copyright (C) 2015 Renesas Electronics Corporation
   6  *
   7  * SPDX-License-Identifier: GPL-2.0+
   8  */
   9
  10 #ifndef __SALVATOR_X_H
  11 #define __SALVATOR_X_H
  12
  13 #undef DEBUG
  14
  15 #define CONFIG_RCAR_BOARD_STRING "Salvator-X"
  16
  17 #include "rcar-gen3-common.h"
  18
  19 /* SCIF */
  20 #define CONFIG_SCIF_CONSOLE
  21 #define CONFIG_CONS_SCIF2
  22 #define CONFIG_CONS_INDEX       2
  23 #define CONFIG_SH_SCIF_CLK_FREQ CONFIG_SYS_CLK_FREQ
  24
  25 /* [A] Hyper Flash */
  26 /* use to RPC(SPI Multi I/O Bus Controller) */
  27 #define CONFIG_SYS_NO_FLASH
  28 #define CONFIG_ENV_IS_NOWHERE
  29
  30 /* Board Clock */
  31 /* XTAL_CLK : 33.33MHz */
  32 #define RCAR_XTAL_CLK           33333333u
  33 #define CONFIG_SYS_CLK_FREQ     RCAR_XTAL_CLK
  34 /* ch0to2 CPclk, ch3to11 S3D2_PEREclk, ch12to14 S3D2_RTclk */
  35 /* CPclk 16.66MHz, S3D2 133.33MHz                          */
  36 #define CONFIG_CP_CLK_FREQ      (CONFIG_SYS_CLK_FREQ / 2)
  37 #define CONFIG_PLL1_CLK_FREQ    (CONFIG_SYS_CLK_FREQ * 192 / 2)
  38 #define CONFIG_S3D2_CLK_FREQ    (266666666u/2)
  39
  40 /* Generic Timer Definitions (use in assembler source) */
  41 #define COUNTER_FREQUENCY       0xFE502A        /* 16.66MHz from CPclk */
  42
  43 /* Generic Interrupt Controller Definitions */
  44 #define CONFIG_GICV2
  45 #define GICD_BASE       0xF1010000
  46 #define GICC_BASE       0xF1020000
  47
  48 /* Module stop status bits */
  49 /* MFIS, SCIF1 */
  50 #define CONFIG_SMSTP2_ENA       0x00002040
  51 /* INTC-AP, IRQC */
  52 #define CONFIG_SMSTP4_ENA       0x00000180
  53
  54 #endif /* __SALVATOR_X_H */