include/configs/sama5d4ek.h

   1 /*
   2  * Configuration settings for the SAMA5D4EK board.
   3  *
   4  * Copyright (C) 2014 Atmel
   5  *                    Bo Shen <voice.shen@atmel.com>
   6  *
   7  * SPDX-License-Identifier:     GPL-2.0+
   8  */
   9
  10 #ifndef __CONFIG_H
  11 #define __CONFIG_H
  12
  13 /* No NOR flash, this definition should put before common header */
  14 #define CONFIG_SYS_NO_FLASH
  15
  16 #include "at91-sama5_common.h"
  17
  18 /* serial console */
  19 #define CONFIG_ATMEL_USART
  20 #define CONFIG_USART_BASE               ATMEL_BASE_USART3
  21 #define CONFIG_USART_ID                 ATMEL_ID_USART3
  22
  23 /* SDRAM */
  24 #define CONFIG_NR_DRAM_BANKS            1
  25 #define CONFIG_SYS_SDRAM_BASE           ATMEL_BASE_DDRCS
  26 #define CONFIG_SYS_SDRAM_SIZE           0x20000000
  27
  28 #ifdef CONFIG_SPL_BUILD
  29 #define CONFIG_SYS_INIT_SP_ADDR         0x210000
  30 #else
  31 #define CONFIG_SYS_INIT_SP_ADDR \
  32         (CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE)
  33 #endif
  34
  35 #define CONFIG_SYS_LOAD_ADDR            0x22000000 /* load address */
  36
  37 /* SerialFlash */
  38
  39 #ifdef CONFIG_CMD_SF
  40 #define CONFIG_ATMEL_SPI
  41 #define CONFIG_ATMEL_SPI0
  42 #define CONFIG_SF_DEFAULT_BUS           0
  43 #define CONFIG_SF_DEFAULT_CS            0
  44 #define CONFIG_SF_DEFAULT_SPEED         30000000
  45 #endif
  46
  47 /* NAND flash */
  48 #define CONFIG_CMD_NAND
  49
  50 #ifdef CONFIG_CMD_NAND
  51 #define CONFIG_NAND_ATMEL
  52 #define CONFIG_SYS_MAX_NAND_DEVICE      1
  53 #define CONFIG_SYS_NAND_BASE            ATMEL_BASE_CS3
  54 /* our ALE is AD21 */
  55 #define CONFIG_SYS_NAND_MASK_ALE        (1 << 21)
  56 /* our CLE is AD22 */
  57 #define CONFIG_SYS_NAND_MASK_CLE        (1 << 22)
  58 #define CONFIG_SYS_NAND_ONFI_DETECTION
  59 /* PMECC & PMERRLOC */
  60 #define CONFIG_ATMEL_NAND_HWECC
  61 #define CONFIG_ATMEL_NAND_HW_PMECC
  62 #endif
  63
  64 /* MMC */
  65
  66 #ifdef CONFIG_CMD_MMC
  67 #define CONFIG_MMC
  68 #define CONFIG_GENERIC_MMC
  69 #define CONFIG_GENERIC_ATMEL_MCI
  70 #define ATMEL_BASE_MMCI                 ATMEL_BASE_MCI1
  71 #endif
  72
  73 /* USB */
  74
  75 #ifdef CONFIG_CMD_USB
  76 #define CONFIG_USB_EHCI
  77 #define CONFIG_USB_EHCI_ATMEL
  78 #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS      3
  79 #define CONFIG_USB_STORAGE
  80 #endif
  81
  82 /* USB device */
  83 #define CONFIG_USB_ETHER
  84 #define CONFIG_USB_ETH_RNDIS
  85 #define CONFIG_USBNET_MANUFACTURER      "Atmel SAMA5D4EK"
  86
  87 #if defined(CONFIG_CMD_USB) || defined(CONFIG_CMD_MMC)
  88 #define CONFIG_DOS_PARTITION
  89 #endif
  90
  91 /* Ethernet Hardware */
  92 #define CONFIG_MACB
  93 #define CONFIG_RMII
  94 #define CONFIG_NET_RETRY_COUNT          20
  95 #define CONFIG_MACB_SEARCH_PHY
  96
  97 /* LCD */
  98 #define CONFIG_LCD
  99 #define LCD_BPP                         LCD_COLOR16
 100 #define LCD_OUTPUT_BPP                  18
 101 #define CONFIG_LCD_LOGO
 102 #define CONFIG_LCD_INFO
 103 #define CONFIG_LCD_INFO_BELOW_LOGO
 104 #define CONFIG_SYS_WHITE_ON_BLACK
 105 #define CONFIG_ATMEL_HLCD
 106 #define CONFIG_ATMEL_LCD_RGB565
 107 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
 108
 109 #ifdef CONFIG_SYS_USE_SERIALFLASH
 110 /* override the bootcmd, bootargs and other configuration for spi flash env*/
 111 #elif CONFIG_SYS_USE_NANDFLASH
 112 /* override the bootcmd, bootargs and other configuration for nandflash env*/
 113 #elif CONFIG_SYS_USE_MMC
 114 /* override the bootcmd, bootargs and other configuration for sd/mmc env */
 115 #endif
 116
 117 /* SPL */
 118 #define CONFIG_SPL_FRAMEWORK
 119 #define CONFIG_SPL_TEXT_BASE            0x200000
 120 #define CONFIG_SPL_MAX_SIZE             0x10000
 121 #define CONFIG_SPL_BSS_START_ADDR       0x20000000
 122 #define CONFIG_SPL_BSS_MAX_SIZE         0x80000
 123 #define CONFIG_SYS_SPL_MALLOC_START     0x20080000
 124 #define CONFIG_SYS_SPL_MALLOC_SIZE      0x80000
 125
 126 #define CONFIG_SPL_LIBCOMMON_SUPPORT
 127 #define CONFIG_SPL_LIBGENERIC_SUPPORT
 128 #define CONFIG_SPL_GPIO_SUPPORT
 129 #define CONFIG_SPL_SERIAL_SUPPORT
 130
 131 #define CONFIG_SPL_BOARD_INIT
 132 #define CONFIG_SYS_MONITOR_LEN          (512 << 10)
 133
 134 #ifdef CONFIG_SYS_USE_MMC
 135 #define CONFIG_SPL_LDSCRIPT             arch/arm/mach-at91/armv7/u-boot-spl.lds
 136 #define CONFIG_SPL_MMC_SUPPORT
 137 #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS      0x400
 138 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x200
 139 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION      1
 140 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME         "u-boot.img"
 141 #define CONFIG_SPL_FAT_SUPPORT
 142 #define CONFIG_SPL_LIBDISK_SUPPORT
 143
 144 #elif CONFIG_SYS_USE_NANDFLASH
 145 #define CONFIG_SPL_NAND_SUPPORT
 146 #define CONFIG_SPL_NAND_DRIVERS
 147 #define CONFIG_SPL_NAND_BASE
 148 #define CONFIG_PMECC_CAP                8
 149 #define CONFIG_PMECC_SECTOR_SIZE        512
 150 #define CONFIG_SYS_NAND_U_BOOT_OFFS     0x40000
 151 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 152 #define CONFIG_SYS_NAND_PAGE_SIZE       0x1000
 153 #define CONFIG_SYS_NAND_PAGE_COUNT      64
 154 #define CONFIG_SYS_NAND_OOBSIZE         224
 155 #define CONFIG_SYS_NAND_BLOCK_SIZE      0x40000
 156 #define CONFIG_SYS_NAND_BAD_BLOCK_POS   0x0
 157 #define CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER
 158
 159 #elif CONFIG_SYS_USE_SERIALFLASH
 160 #define CONFIG_SPL_SPI_SUPPORT
 161 #define CONFIG_SPL_SPI_FLASH_SUPPORT
 162 #define CONFIG_SPL_SPI_LOAD
 163 #define CONFIG_SYS_SPI_U_BOOT_OFFS      0x8000
 164
 165 #endif
 166 #endif