include/configs/sbc405.h

   1 /*
   2  * (C) Copyright 2001
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 /*
   8  * board/config.h - configuration options, board specific
   9  */
  10
  11 #ifndef __CONFIG_H
  12 #define __CONFIG_H
  13
  14 /*
  15  * High Level Configuration Options
  16  * (easy to change)
  17  */
  18
  19 #define CONFIG_405GP            1       /* This is a PPC405 CPU         */
  20 #define CONFIG_SBC405           1       /* ...on a WR SBC405 board      */
  21
  22 #define CONFIG_SYS_TEXT_BASE    0xFFFC0000
  23
  24 #define CONFIG_BOARD_EARLY_INIT_F 1     /* call board_early_init_f()    */
  25 #define CONFIG_MISC_INIT_R      1       /* call misc_init_r()           */
  26
  27 #define CONFIG_SYS_CLK_FREQ     33333333 /* external frequency to pll   */
  28
  29 #define CONFIG_BAUDRATE         9600
  30
  31 #define CONFIG_PREBOOT  "echo;echo Welcome to U-Boot for the sbc405;echo;echo Type \"? or help\" to get on-line help;echo"
  32
  33 #define CONFIG_RAMBOOT                                                          \
  34         "setenv bootargs root=/dev/ram rw nfsroot=${serverip}:${rootpath} "     \
  35         "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off;"    \
  36         "bootm ffc00000 ffca0000"
  37 #define CONFIG_NFSBOOT                                                          \
  38         "setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} "     \
  39         "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off;"    \
  40         "bootm ffc00000"
  41
  42 #undef CONFIG_BOOTARGS
  43 #define CONFIG_BOOTCOMMAND      "version;echo;tftpboot ${loadaddr} ${loadfile};bootvx"      /* autoboot command     */
  44
  45
  46 #define CONFIG_PPC4xx_EMAC
  47 #define CONFIG_MII              1       /* MII PHY management           */
  48 #define CONFIG_PHY_ADDR         0       /* PHY address                  */
  49 #define CONFIG_PHY_RESET_DELAY  300     /* Intel LXT971A needs this     */
  50
  51 #define CONFIG_EXTRA_ENV_SETTINGS \
  52         "bootargs=emac(0,0)host:/T221ppc/target/config/sbc405/vxWorks.st " \
  53                 "e=192.168.193.102:ffffffe0 h=192.168.193.100 u=target pw=hello " \
  54                 "f=0x08 tn=sbc405 o=emac \0" \
  55         "env_startaddr=FF000000\0" \
  56         "env_endaddr=FF03FFFF\0" \
  57         "loadfile=vxWorks.st\0" \
  58         "loadaddr=0x01000000\0" \
  59         "net_load=tftpboot ${loadaddr} ${loadfile}\0" \
  60         "uboot_startaddr=FFFC0000\0" \
  61         "uboot_endaddr=FFFFFFFF\0" \
  62         "update=tftp ${loadaddr} u-boot.bin;" \
  63                 "protect off ${uboot_startaddr} ${uboot_endaddr};" \
  64                 "era ${uboot_startaddr} ${uboot_endaddr};" \
  65                 "cp.b ${loadaddr} ${uboot_startaddr} ${filesize};" \
  66                 "protect on ${uboot_startaddr} ${uboot_endaddr}\0" \
  67         "zapenv=protect off ${env_startaddr} ${env_endaddr};" \
  68                 "era ${env_startaddr} ${env_endaddr};" \
  69                 "protect on ${env_startaddr} ${env_endaddr}\0"
  70
  71 #define CONFIG_BOOTDELAY        5       /* autoboot after 5 seconds     */
  72
  73 /*
  74  * BOOTP options
  75  */
  76 #define CONFIG_BOOTP_SUBNETMASK
  77 #define CONFIG_BOOTP_GATEWAY
  78 #define CONFIG_BOOTP_HOSTNAME
  79 #define CONFIG_BOOTP_BOOTPATH
  80 #define CONFIG_BOOTP_BOOTFILESIZE
  81
  82
  83 #define CONFIG_ENV_OVERWRITE
  84
  85
  86 /*
  87  * Command line configuration.
  88  */
  89 #include <config_cmd_default.h>
  90
  91 #define CONFIG_CMD_BSP
  92 #define CONFIG_CMD_ELF
  93 #define CONFIG_CMD_I2C
  94 #define CONFIG_CMD_IRQ
  95 #define CONFIG_CMD_MII
  96 #define CONFIG_CMD_PCI
  97 #define CONFIG_CMD_PING
  98 #define CONFIG_CMD_SDRAM
  99
 100
 101 #undef  CONFIG_WATCHDOG                 /* watchdog disabled            */
 102
 103 #define CONFIG_SDRAM_BANK0      1       /* init onboard SDRAM bank 0    */
 104
 105 #define CONFIG_ETHADDR  DE:AD:BE:EF:01:01       /* Ethernet address     */
 106 #define CONFIG_IPADDR           192.168.193.102
 107 #define CONFIG_NETMASK          255.255.255.224
 108 #define CONFIG_SERVERIP         192.168.193.119
 109 #define CONFIG_GATEWAYIP        192.168.193.97
 110
 111 /*
 112  * Miscellaneous configurable options
 113  */
 114 #define CONFIG_SYS_LONGHELP                     /* undef to save memory         */
 115
 116 #undef CONFIG_SYS_HUSH_PARSER                   /* use "hush" command parser    */
 117
 118 #if defined(CONFIG_CMD_KGDB)
 119 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O Buffer Size      */
 120 #else
 121 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size      */
 122 #endif
 123 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
 124 #define CONFIG_SYS_MAXARGS      16              /* max number of command args   */
 125 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE       /* Boot Argument Buffer Size    */
 126
 127 #define CONFIG_SYS_MEMTEST_START        0x0400000       /* memtest works on     */
 128 #define CONFIG_SYS_MEMTEST_END          0x0C00000       /* 4 ... 12 MB in DRAM  */
 129
 130 #define CONFIG_CONS_INDEX       1       /* Use UART0                    */
 131 #define CONFIG_SYS_NS16550
 132 #define CONFIG_SYS_NS16550_SERIAL
 133 #define CONFIG_SYS_NS16550_REG_SIZE     1
 134 #define CONFIG_SYS_NS16550_CLK          get_serial_clock()
 135
 136 #undef CONFIG_SYS_EXT_SERIAL_CLOCK              /* no external serial clock used */
 137 #define CONFIG_SYS_BASE_BAUD            691200
 138
 139 /* The following table includes the supported baudrates */
 140 #define CONFIG_SYS_BAUDRATE_TABLE                                       \
 141         { 300, 600, 1200, 2400, 4800, 9600, 19200, 38400,       \
 142          57600, 115200, 230400, 460800, 921600 }
 143
 144 #define CONFIG_SYS_LOAD_ADDR    0x100000        /* default load address */
 145 #define CONFIG_SYS_EXTBDINFO    1               /* To use extended board_info (bd_t) */
 146
 147 #define CONFIG_VERSION_VARIABLE 1       /* include version env variable */
 148
 149 #define CONFIG_SYS_RX_ETH_BUFFER        16      /* use 16 rx buffer on 405 emac */
 150
 151 #define CONFIG_SYS_I2C
 152 #define CONFIG_SYS_I2C_PPC4XX
 153 #define CONFIG_SYS_I2C_PPC4XX_CH0
 154 #define CONFIG_SYS_I2C_PPC4XX_SPEED_0           400000
 155 #define CONFIG_SYS_I2C_PPC4XX_SLAVE_0           0x7F
 156
 157 /*-----------------------------------------------------------------------
 158  * PCI stuff
 159  *-----------------------------------------------------------------------
 160  */
 161 #define PCI_HOST_ADAPTER        0       /* configure as pci adapter     */
 162 #define PCI_HOST_FORCE          1       /* configure as pci host        */
 163 #define PCI_HOST_AUTO           2       /* detected via arbiter enable  */
 164
 165 #define CONFIG_PCI                      /* include pci support          */
 166 #define CONFIG_PCI_INDIRECT_BRIDGE      /* indirect PCI bridge support */
 167 #define CONFIG_PCI_HOST PCI_HOST_FORCE  /* select pci host function     */
 168 #define CONFIG_PCI_PNP                  /* do pci plug-and-play         */
 169                                         /* resource configuration       */
 170
 171 #define CONFIG_PCI_SCAN_SHOW            /* print pci devices @ startup  */
 172
 173 #define CONFIG_SYS_PCI_SUBSYS_VENDORID  0x12FE  /* PCI Vendor ID: esd gmbh      */
 174 #define CONFIG_SYS_PCI_SUBSYS_DEVICEID  0x0408  /* PCI Device ID: PMC-405       */
 175 #define CONFIG_SYS_PCI_CLASSCODE        0x0b20  /* PCI Class Code: Processor/PPC*/
 176 #define CONFIG_SYS_PCI_PTM1LA   0x00000000      /* point to sdram               */
 177 #define CONFIG_SYS_PCI_PTM1MS   0xfc000001      /* 64MB, enable hard-wired to 1 */
 178 #define CONFIG_SYS_PCI_PTM1PCI  0x00000000      /* Host: use this pci address   */
 179 #define CONFIG_SYS_PCI_PTM2LA   0xffc00000      /* point to flash               */
 180 #define CONFIG_SYS_PCI_PTM2MS   0xffc00001      /* 4MB, enable                  */
 181 #define CONFIG_SYS_PCI_PTM2PCI  0x04000000      /* Host: use this pci address   */
 182
 183 /*-----------------------------------------------------------------------
 184  * Start addresses for the final memory configuration
 185  * (Set up by the startup code)
 186  * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
 187  */
 188 #define CONFIG_SYS_SDRAM_BASE           0x00000000
 189 #define CONFIG_SYS_MONITOR_BASE 0xFFFC0000
 190 #define CONFIG_SYS_MONITOR_LEN  (256 * 1024)    /* Reserve 256 kB for Monitor   */
 191 #define CONFIG_SYS_MALLOC_LEN   (128 * 1024)    /* Reserve 128 kB for malloc()  */
 192
 193 /*
 194  * For booting Linux, the board info and command line data
 195  * have to be in the first 8 MB of memory, since this is
 196  * the maximum mapped by the Linux kernel during initialization.
 197  */
 198 #define CONFIG_SYS_BOOTMAPSZ    (8 << 20)       /* Initial Memory map for Linux */
 199
 200 /*-----------------------------------------------------------------------
 201  * FLASH organization
 202  */
 203 #define CONFIG_SYS_FLASH_BASE           0xFF000000
 204 #define CONFIG_SYS_FLASH_CFI            1       /* Flash is CFI conformant              */
 205 #define CONFIG_SYS_FLASH_EMPTY_INFO             /* print 'E' for empty sector on flinfo */
 206 #define CONFIG_SYS_FLASH_ERASE_TOUT     120000  /* Flash Erase Timeout (in ms)          */
 207 #define CONFIG_SYS_FLASH_INCREMENT      0x01000000
 208 #undef CONFIG_SYS_FLASH_PROTECTION              /* don't use hardware protection        */
 209 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1     /* use buffered writes (20x faster)     */
 210 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (in ms)          */
 211 #define CONFIG_SYS_MAX_FLASH_BANKS      1       /* max number of memory banks           */
 212 #define CONFIG_SYS_MAX_FLASH_SECT       128     /* max number of sectors on one chip    */
 213
 214 /*-----------------------------------------------------------------------
 215  * Environment Variable setup
 216  */
 217 #define CONFIG_ENV_ADDR CONFIG_SYS_FLASH_BASE   /* starting right at the beginning      */
 218 #define CONFIG_ENV_IS_IN_FLASH  1
 219 #define CONFIG_ENV_OFFSET               0       /* starting right at the beginning      */
 220 #define CONFIG_ENV_SECT_SIZE    0x40000 /* see README - env sector total size   */
 221 #define CONFIG_ENV_SIZE         0x40000 /* Total Size of Environment Sector     */
 222
 223 /*-----------------------------------------------------------------------
 224  * External Bus Controller (EBC) Setup
 225  */
 226 #define FLASH0_BA       CONFIG_SYS_FLASH_BASE           /* FLASH 0 Base Address         */
 227
 228 /* Memory Bank 0 (Flash Bank 0) initialization                                  */
 229 #define CONFIG_SYS_EBC_PB0AP    0x92015480
 230 #define CONFIG_SYS_EBC_PB0CR    FLASH0_BA | 0x9C000 /* BAS=0xFF0,BS=16MB,BU=R/W,BW=32bit*/
 231
 232 /*-----------------------------------------------------------------------
 233  * Definitions for initial stack pointer and data area (in data cache)
 234  */
 235
 236 /* use on chip memory ( OCM ) for temperary stack until sdram is tested */
 237 #define CONFIG_SYS_TEMP_STACK_OCM       1
 238
 239 /* On Chip Memory location */
 240 #define CONFIG_SYS_OCM_DATA_ADDR        0xF8000000
 241 #define CONFIG_SYS_OCM_DATA_SIZE        0x1000
 242
 243 #define CONFIG_SYS_INIT_RAM_ADDR        CONFIG_SYS_OCM_DATA_ADDR /* inside of SDRAM             */
 244 #define CONFIG_SYS_INIT_RAM_SIZE        CONFIG_SYS_OCM_DATA_SIZE /* Size of used area in RAM    */
 245 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 246 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 247
 248 /*-----------------------------------------------------------------------
 249  * Definitions for Serial Presence Detect EEPROM address
 250  * (to get SDRAM settings)
 251  */
 252 #define SPD_EEPROM_ADDRESS      0x50
 253 #define CONFIG_SPD_EEPROM       1       /* use SPD EEPROM for setup             */
 254
 255 #endif  /* __CONFIG_H */