include/configs/sbc8349.h

   1 /*
   2  * WindRiver SBC8349 U-Boot configuration file.
   3  * Copyright (c) 2006, 2007 Wind River Systems, Inc.
   4  *
   5  * Paul Gortmaker <paul.gortmaker@windriver.com>
   6  * Based on the MPC8349EMDS config.
   7  *
   8  * See file CREDITS for list of people who contributed to this
   9  * project.
  10  *
  11  * This program is free software; you can redistribute it and/or
  12  * modify it under the terms of the GNU General Public License as
  13  * published by the Free Software Foundation; either version 2 of
  14  * the License, or (at your option) any later version.
  15  *
  16  * This program is distributed in the hope that it will be useful,
  17  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  18  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  19  * GNU General Public License for more details.
  20  *
  21  * You should have received a copy of the GNU General Public License
  22  * along with this program; if not, write to the Free Software
  23  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  24  * MA 02111-1307 USA
  25  */
  26
  27 /*
  28  * sbc8349 board configuration file.
  29  */
  30
  31 #ifndef __CONFIG_H
  32 #define __CONFIG_H
  33
  34 /*
  35  * High Level Configuration Options
  36  */
  37 #define CONFIG_E300             1       /* E300 Family */
  38 #define CONFIG_MPC83xx          1       /* MPC83xx family */
  39 #define CONFIG_MPC834x          1       /* MPC834x family */
  40 #define CONFIG_MPC8349          1       /* MPC8349 specific */
  41 #define CONFIG_SBC8349          1       /* WRS SBC8349 board specific */
  42
  43 #define CONFIG_SYS_TEXT_BASE    0xFF800000
  44
  45 /* Don't enable PCI2 on sbc834x - it doesn't exist physically. */
  46 #undef CONFIG_MPC83XX_PCI2              /* support for 2nd PCI controller */
  47
  48 /*
  49  * The default if PCI isn't enabled, or if no PCI clk setting is given
  50  * is 66MHz; this is what the board defaults to when the PCI slot is
  51  * physically empty.  The board will automatically (i.e w/o jumpers)
  52  * clock down to 33MHz if you insert a 33MHz PCI card.
  53  */
  54 #ifdef CONFIG_PCI_33M
  55 #define CONFIG_83XX_CLKIN       33000000        /* in Hz */
  56 #else   /* 66M */
  57 #define CONFIG_83XX_CLKIN       66000000        /* in Hz */
  58 #endif
  59
  60 #ifndef CONFIG_SYS_CLK_FREQ
  61 #ifdef CONFIG_PCI_33M
  62 #define CONFIG_SYS_CLK_FREQ     33000000
  63 #define HRCWL_CSB_TO_CLKIN      HRCWL_CSB_TO_CLKIN_8X1
  64 #else   /* 66M */
  65 #define CONFIG_SYS_CLK_FREQ     66000000
  66 #define HRCWL_CSB_TO_CLKIN      HRCWL_CSB_TO_CLKIN_4X1
  67 #endif
  68 #endif
  69
  70 #undef CONFIG_BOARD_EARLY_INIT_F                /* call board_pre_init */
  71
  72 #define CONFIG_SYS_IMMR         0xE0000000
  73
  74 #undef CONFIG_SYS_DRAM_TEST             /* memory test, takes time */
  75 #define CONFIG_SYS_MEMTEST_START        0x00000000      /* memtest region */
  76 #define CONFIG_SYS_MEMTEST_END          0x00100000
  77
  78 /*
  79  * DDR Setup
  80  */
  81 #undef CONFIG_DDR_ECC                   /* only for ECC DDR module */
  82 #undef CONFIG_DDR_ECC_CMD               /* use DDR ECC user commands */
  83 #define CONFIG_SPD_EEPROM               /* use SPD EEPROM for DDR setup*/
  84 #define CONFIG_SYS_83XX_DDR_USES_CS0    /* WRS; Fsl board uses CS2/CS3 */
  85
  86 /*
  87  * 32-bit data path mode.
  88  *
  89  * Please note that using this mode for devices with the real density of 64-bit
  90  * effectively reduces the amount of available memory due to the effect of
  91  * wrapping around while translating address to row/columns, for example in the
  92  * 256MB module the upper 128MB get aliased with contents of the lower
  93  * 128MB); normally this define should be used for devices with real 32-bit
  94  * data path.
  95  */
  96 #undef CONFIG_DDR_32BIT
  97
  98 #define CONFIG_SYS_DDR_BASE             0x00000000 /* DDR is system memory*/
  99 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_BASE
 100 #define CONFIG_SYS_DDR_SDRAM_BASE       CONFIG_SYS_DDR_BASE
 101 #define CONFIG_SYS_DDR_SDRAM_CLK_CNTL   (DDR_SDRAM_CLK_CNTL_SS_EN | \
 102                                 DDR_SDRAM_CLK_CNTL_CLK_ADJUST_075)
 103 #define CONFIG_DDR_2T_TIMING
 104
 105 #if defined(CONFIG_SPD_EEPROM)
 106 /*
 107  * Determine DDR configuration from I2C interface.
 108  */
 109 #define SPD_EEPROM_ADDRESS      0x52            /* DDR DIMM */
 110
 111 #else
 112 /*
 113  * Manually set up DDR parameters
 114  * NB: manual DDR setup untested on sbc834x
 115  */
 116 #define CONFIG_SYS_DDR_SIZE             256             /* MB */
 117 #define CONFIG_SYS_DDR_CONFIG           (CSCONFIG_EN \
 118                                         | CSCONFIG_ROW_BIT_13 \
 119                                         | CSCONFIG_COL_BIT_10)
 120 #define CONFIG_SYS_DDR_TIMING_1 0x36332321
 121 #define CONFIG_SYS_DDR_TIMING_2 0x00000800      /* P9-45,may need tuning */
 122 #define CONFIG_SYS_DDR_CONTROL  0xc2000000      /* unbuffered,no DYN_PWR */
 123 #define CONFIG_SYS_DDR_INTERVAL 0x04060100      /* autocharge,no open page */
 124
 125 #if defined(CONFIG_DDR_32BIT)
 126 /* set burst length to 8 for 32-bit data path */
 127                                 /* DLL,normal,seq,4/2.5, 8 burst len */
 128 #define CONFIG_SYS_DDR_MODE     0x00000023
 129 #else
 130 /* the default burst length is 4 - for 64-bit data path */
 131                                 /* DLL,normal,seq,4/2.5, 4 burst len */
 132 #define CONFIG_SYS_DDR_MODE     0x00000022
 133 #endif
 134 #endif
 135
 136 /*
 137  * SDRAM on the Local Bus
 138  */
 139 #define CONFIG_SYS_LBC_SDRAM_BASE       0x10000000      /* Localbus SDRAM */
 140 #define CONFIG_SYS_LBC_SDRAM_SIZE       128     /* LBC SDRAM is 128MB */
 141
 142 /*
 143  * FLASH on the Local Bus
 144  */
 145 #define CONFIG_SYS_FLASH_CFI            /* use the Common Flash Interface */
 146 #define CONFIG_FLASH_CFI_DRIVER         /* use the CFI driver */
 147 #define CONFIG_SYS_FLASH_BASE           0xFF800000      /* start of FLASH   */
 148 #define CONFIG_SYS_FLASH_SIZE           8               /* flash size in MB */
 149 /* #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE */
 150
 151 #define CONFIG_SYS_BR0_PRELIM   (CONFIG_SYS_FLASH_BASE \
 152                                 | (2 << BR_PS_SHIFT)    /* 16 bit port */ \
 153                                 | BR_V)                 /* valid */
 154
 155 #define CONFIG_SYS_OR0_PRELIM           0xFF806FF7      /* 8 MB flash size */
 156                                         /* window base at flash base */
 157 #define CONFIG_SYS_LBLAWBAR0_PRELIM     CONFIG_SYS_FLASH_BASE
 158 #define CONFIG_SYS_LBLAWAR0_PRELIM      0x80000016      /* 8 MB window size */
 159
 160 #define CONFIG_SYS_MAX_FLASH_BANKS      1       /* number of banks */
 161 #define CONFIG_SYS_MAX_FLASH_SECT       64      /* sectors per device */
 162
 163 #undef CONFIG_SYS_FLASH_CHECKSUM
 164 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 165 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 166
 167 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
 168
 169 #if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
 170 #define CONFIG_SYS_RAMBOOT
 171 #else
 172 #undef  CONFIG_SYS_RAMBOOT
 173 #endif
 174
 175 #define CONFIG_SYS_INIT_RAM_LOCK        1
 176                                         /* Initial RAM address */
 177 #define CONFIG_SYS_INIT_RAM_ADDR        0xFD000000
 178                                         /* Size of used area in RAM*/
 179 #define CONFIG_SYS_INIT_RAM_SIZE        0x1000
 180
 181 #define CONFIG_SYS_GBL_DATA_OFFSET      \
 182                         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 183 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 184
 185 #define CONFIG_SYS_MONITOR_LEN  (256 * 1024)    /* Reserve 256 kB for Mon */
 186 #define CONFIG_SYS_MALLOC_LEN   (128 * 1024)    /* Reserved for malloc */
 187
 188 /*
 189  * Local Bus LCRR and LBCR regs
 190  *    LCRR:  DLL bypass, Clock divider is 4
 191  * External Local Bus rate is
 192  *    CLKIN * HRCWL_CSB_TO_CLKIN / HRCWL_LCL_BUS_TO_SCB_CLK / LCRR_CLKDIV
 193  */
 194 #define CONFIG_SYS_LCRR_DBYP    LCRR_DBYP
 195 #define CONFIG_SYS_LCRR_CLKDIV  LCRR_CLKDIV_4
 196 #define CONFIG_SYS_LBC_LBCR     0x00000000
 197
 198 #undef CONFIG_SYS_LB_SDRAM      /* if board has SDRAM on local bus */
 199
 200 #ifdef CONFIG_SYS_LB_SDRAM
 201 /* Local bus BR2, OR2 definition for SDRAM if soldered on the board*/
 202 /*
 203  * Base Register 2 and Option Register 2 configure SDRAM.
 204  * The SDRAM base address, CONFIG_SYS_LBC_SDRAM_BASE, is 0xf0000000.
 205  *
 206  * For BR2, need:
 207  *    Base address of 0xf0000000 = BR[0:16] = 1111 0000 0000 0000 0
 208  *    port-size = 32-bits = BR2[19:20] = 11
 209  *    no parity checking = BR2[21:22] = 00
 210  *    SDRAM for MSEL = BR2[24:26] = 011
 211  *    Valid = BR[31] = 1
 212  *
 213  * 0    4    8    12   16   20   24   28
 214  * 1111 0000 0000 0000 0001 1000 0110 0001 = F0001861
 215  *
 216  * FIXME: CONFIG_SYS_LBC_SDRAM_BASE should be masked and OR'ed into
 217  * FIXME: the top 17 bits of BR2.
 218  */
 219
 220                                         /* Port-size=32bit, MSEL=SDRAM */
 221 #define CONFIG_SYS_BR2_PRELIM           0xF0001861
 222 #define CONFIG_SYS_LBLAWBAR2_PRELIM     0xF0000000
 223 #define CONFIG_SYS_LBLAWAR2_PRELIM      0x80000019 /* 64M */
 224
 225 /*
 226  * The SDRAM size in MB, CONFIG_SYS_LBC_SDRAM_SIZE, is 64.
 227  *
 228  * For OR2, need:
 229  *    64MB mask for AM, OR2[0:7] = 1111 1100
 230  *                 XAM, OR2[17:18] = 11
 231  *    9 columns OR2[19-21] = 010
 232  *    13 rows   OR2[23-25] = 100
 233  *    EAD set for extra time OR[31] = 1
 234  *
 235  * 0    4    8    12   16   20   24   28
 236  * 1111 1100 0000 0000 0110 1001 0000 0001 = FC006901
 237  */
 238
 239 #define CONFIG_SYS_OR2_PRELIM   0xFC006901
 240
 241                                 /* LB sdram refresh timer, about 6us */
 242 #define CONFIG_SYS_LBC_LSRT     0x32000000
 243                                 /* LB refresh timer prescal, 266MHz/32 */
 244 #define CONFIG_SYS_LBC_MRTPR    0x20000000
 245
 246 #define CONFIG_SYS_LBC_LSDMR_COMMON     (LSDMR_RFEN \
 247                                         | LSDMR_BSMA1516 \
 248                                         | LSDMR_RFCR8 \
 249                                         | LSDMR_PRETOACT6 \
 250                                         | LSDMR_ACTTORW3 \
 251                                         | LSDMR_BL8 \
 252                                         | LSDMR_WRC3 \
 253                                         | LSDMR_CL3)
 254
 255 /*
 256  * SDRAM Controller configuration sequence.
 257  */
 258 #define CONFIG_SYS_LBC_LSDMR_1  (CONFIG_SYS_LBC_LSDMR_COMMON | LSDMR_OP_PCHALL)
 259 #define CONFIG_SYS_LBC_LSDMR_2  (CONFIG_SYS_LBC_LSDMR_COMMON | LSDMR_OP_ARFRSH)
 260 #define CONFIG_SYS_LBC_LSDMR_3  (CONFIG_SYS_LBC_LSDMR_COMMON | LSDMR_OP_ARFRSH)
 261 #define CONFIG_SYS_LBC_LSDMR_4  (CONFIG_SYS_LBC_LSDMR_COMMON | LSDMR_OP_MRW)
 262 #define CONFIG_SYS_LBC_LSDMR_5  (CONFIG_SYS_LBC_LSDMR_COMMON | LSDMR_OP_NORMAL)
 263 #endif
 264
 265 /*
 266  * Serial Port
 267  */
 268 #define CONFIG_CONS_INDEX     1
 269 #define CONFIG_SYS_NS16550
 270 #define CONFIG_SYS_NS16550_SERIAL
 271 #define CONFIG_SYS_NS16550_REG_SIZE    1
 272 #define CONFIG_SYS_NS16550_CLK          get_bus_freq(0)
 273
 274 #define CONFIG_SYS_BAUDRATE_TABLE  \
 275                 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200}
 276
 277 #define CONFIG_SYS_NS16550_COM1        (CONFIG_SYS_IMMR+0x4500)
 278 #define CONFIG_SYS_NS16550_COM2        (CONFIG_SYS_IMMR+0x4600)
 279
 280 #define CONFIG_CMDLINE_EDITING  1       /* add command line history     */
 281 #define CONFIG_AUTO_COMPLETE            /* add autocompletion support   */
 282 /* Use the HUSH parser */
 283 #define CONFIG_SYS_HUSH_PARSER
 284 #ifdef CONFIG_SYS_HUSH_PARSER
 285 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
 286 #endif
 287
 288 /* pass open firmware flat tree */
 289 #define CONFIG_OF_LIBFDT        1
 290 #define CONFIG_OF_BOARD_SETUP   1
 291 #define CONFIG_OF_STDOUT_VIA_ALIAS      1
 292
 293 /* I2C */
 294 #define CONFIG_HARD_I2C                 /* I2C with hardware support*/
 295 #undef CONFIG_SOFT_I2C                  /* I2C bit-banged */
 296 #define CONFIG_FSL_I2C
 297 #define CONFIG_SYS_I2C_SPEED    400000  /* I2C speed and slave address */
 298 #define CONFIG_SYS_I2C_SLAVE    0x7F
 299 #define CONFIG_SYS_I2C_NOPROBES {0x69}  /* Don't probe these addrs */
 300 #define CONFIG_SYS_I2C1_OFFSET  0x3000
 301 #define CONFIG_SYS_I2C2_OFFSET  0x3100
 302 #define CONFIG_SYS_I2C_OFFSET   CONFIG_SYS_I2C2_OFFSET
 303 /* could also use CONFIG_I2C_MULTI_BUS and CONFIG_SYS_SPD_BUS_NUM... */
 304
 305 /* TSEC */
 306 #define CONFIG_SYS_TSEC1_OFFSET 0x24000
 307 #define CONFIG_SYS_TSEC1        (CONFIG_SYS_IMMR+CONFIG_SYS_TSEC1_OFFSET)
 308 #define CONFIG_SYS_TSEC2_OFFSET 0x25000
 309 #define CONFIG_SYS_TSEC2        (CONFIG_SYS_IMMR+CONFIG_SYS_TSEC2_OFFSET)
 310
 311 /*
 312  * General PCI
 313  * Addresses are mapped 1-1.
 314  */
 315 #define CONFIG_SYS_PCI1_MEM_BASE        0x80000000
 316 #define CONFIG_SYS_PCI1_MEM_PHYS        CONFIG_SYS_PCI1_MEM_BASE
 317 #define CONFIG_SYS_PCI1_MEM_SIZE        0x10000000      /* 256M */
 318 #define CONFIG_SYS_PCI1_MMIO_BASE       0x90000000
 319 #define CONFIG_SYS_PCI1_MMIO_PHYS       CONFIG_SYS_PCI1_MMIO_BASE
 320 #define CONFIG_SYS_PCI1_MMIO_SIZE       0x10000000      /* 256M */
 321 #define CONFIG_SYS_PCI1_IO_BASE         0x00000000
 322 #define CONFIG_SYS_PCI1_IO_PHYS         0xE2000000
 323 #define CONFIG_SYS_PCI1_IO_SIZE         0x00100000      /* 1M */
 324
 325 #define CONFIG_SYS_PCI2_MEM_BASE        0xA0000000
 326 #define CONFIG_SYS_PCI2_MEM_PHYS        CONFIG_SYS_PCI2_MEM_BASE
 327 #define CONFIG_SYS_PCI2_MEM_SIZE        0x10000000      /* 256M */
 328 #define CONFIG_SYS_PCI2_MMIO_BASE       0xB0000000
 329 #define CONFIG_SYS_PCI2_MMIO_PHYS       CONFIG_SYS_PCI2_MMIO_BASE
 330 #define CONFIG_SYS_PCI2_MMIO_SIZE       0x10000000      /* 256M */
 331 #define CONFIG_SYS_PCI2_IO_BASE         0x00000000
 332 #define CONFIG_SYS_PCI2_IO_PHYS         0xE2100000
 333 #define CONFIG_SYS_PCI2_IO_SIZE         0x00100000      /* 1M */
 334
 335 #if defined(CONFIG_PCI)
 336
 337 #define PCI_64BIT
 338 #define PCI_ONE_PCI1
 339 #if defined(PCI_64BIT)
 340 #undef PCI_ALL_PCI1
 341 #undef PCI_TWO_PCI1
 342 #undef PCI_ONE_PCI1
 343 #endif
 344
 345 #define CONFIG_PCI_PNP          /* do pci plug-and-play */
 346
 347 #undef CONFIG_EEPRO100
 348 #undef CONFIG_TULIP
 349
 350 #if !defined(CONFIG_PCI_PNP)
 351         #define PCI_ENET0_IOADDR        0xFIXME
 352         #define PCI_ENET0_MEMADDR       0xFIXME
 353         #define PCI_IDSEL_NUMBER        0xFIXME
 354 #endif
 355
 356 #undef CONFIG_PCI_SCAN_SHOW             /* show pci devices on startup */
 357 #define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1057  /* Motorola */
 358
 359 #endif  /* CONFIG_PCI */
 360
 361 /*
 362  * TSEC configuration
 363  */
 364 #define CONFIG_TSEC_ENET                /* TSEC ethernet support */
 365
 366 #if defined(CONFIG_TSEC_ENET)
 367
 368 #define CONFIG_TSEC1    1
 369 #define CONFIG_TSEC1_NAME       "TSEC0"
 370 #define CONFIG_TSEC2    1
 371 #define CONFIG_TSEC2_NAME       "TSEC1"
 372 #define CONFIG_PHY_BCM5421S     1
 373 #define TSEC1_PHY_ADDR          0x19
 374 #define TSEC2_PHY_ADDR          0x1a
 375 #define TSEC1_PHYIDX            0
 376 #define TSEC2_PHYIDX            0
 377 #define TSEC1_FLAGS             TSEC_GIGABIT
 378 #define TSEC2_FLAGS             TSEC_GIGABIT
 379
 380 /* Options are: TSEC[0-1] */
 381 #define CONFIG_ETHPRIME         "TSEC0"
 382
 383 #endif  /* CONFIG_TSEC_ENET */
 384
 385 /*
 386  * Environment
 387  */
 388 #ifndef CONFIG_SYS_RAMBOOT
 389         #define CONFIG_ENV_IS_IN_FLASH  1
 390         #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE + 0x40000)
 391         #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K(one sector) for env */
 392         #define CONFIG_ENV_SIZE         0x2000
 393
 394 /* Address and size of Redundant Environment Sector     */
 395 #define CONFIG_ENV_ADDR_REDUND  (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE)
 396 #define CONFIG_ENV_SIZE_REDUND  (CONFIG_ENV_SIZE)
 397
 398 #else
 399         #define CONFIG_SYS_NO_FLASH     1       /* Flash is not usable now */
 400         #define CONFIG_ENV_IS_NOWHERE   1       /* Store ENV in memory only */
 401         #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - 0x1000)
 402         #define CONFIG_ENV_SIZE         0x2000
 403 #endif
 404
 405 #define CONFIG_LOADS_ECHO       1       /* echo on for serial download */
 406 #define CONFIG_SYS_LOADS_BAUD_CHANGE    1       /* allow baudrate change */
 407
 408
 409 /*
 410  * BOOTP options
 411  */
 412 #define CONFIG_BOOTP_BOOTFILESIZE
 413 #define CONFIG_BOOTP_BOOTPATH
 414 #define CONFIG_BOOTP_GATEWAY
 415 #define CONFIG_BOOTP_HOSTNAME
 416
 417
 418 /*
 419  * Command line configuration.
 420  */
 421 #include <config_cmd_default.h>
 422
 423 #define CONFIG_CMD_I2C
 424 #define CONFIG_CMD_MII
 425 #define CONFIG_CMD_PING
 426
 427 #if defined(CONFIG_PCI)
 428     #define CONFIG_CMD_PCI
 429 #endif
 430
 431 #if defined(CONFIG_SYS_RAMBOOT)
 432     #undef CONFIG_CMD_SAVEENV
 433     #undef CONFIG_CMD_LOADS
 434 #endif
 435
 436
 437 #undef CONFIG_WATCHDOG                  /* watchdog disabled */
 438
 439 /*
 440  * Miscellaneous configurable options
 441  */
 442 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 443 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 444 #define CONFIG_SYS_PROMPT       "=> "           /* Monitor Command Prompt */
 445
 446 #if defined(CONFIG_CMD_KGDB)
 447         #define CONFIG_SYS_CBSIZE       1024    /* Console I/O Buffer Size */
 448 #else
 449         #define CONFIG_SYS_CBSIZE       256     /* Console I/O Buffer Size */
 450 #endif
 451
 452                                 /* Print Buffer Size */
 453 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
 454 #define CONFIG_SYS_MAXARGS      16      /* max number of command args */
 455                                 /* Boot Argument Buffer Size */
 456 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE
 457 #define CONFIG_SYS_HZ           1000    /* decrementer freq: 1ms ticks */
 458
 459 /*
 460  * For booting Linux, the board info and command line data
 461  * have to be in the first 256 MB of memory, since this is
 462  * the maximum mapped by the Linux kernel during initialization.
 463  */
 464                                 /* Initial Memory map for Linux*/
 465 #define CONFIG_SYS_BOOTMAPSZ    (256 << 20)
 466
 467 #define CONFIG_SYS_RCWH_PCIHOST 0x80000000 /* PCIHOST  */
 468
 469 #if 1 /*528/264*/
 470 #define CONFIG_SYS_HRCW_LOW (\
 471         HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\
 472         HRCWL_DDR_TO_SCB_CLK_1X1 |\
 473         HRCWL_CSB_TO_CLKIN |\
 474         HRCWL_VCO_1X2 |\
 475         HRCWL_CORE_TO_CSB_2X1)
 476 #elif 0 /*396/132*/
 477 #define CONFIG_SYS_HRCW_LOW (\
 478         HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\
 479         HRCWL_DDR_TO_SCB_CLK_1X1 |\
 480         HRCWL_CSB_TO_CLKIN |\
 481         HRCWL_VCO_1X4 |\
 482         HRCWL_CORE_TO_CSB_3X1)
 483 #elif 0 /*264/132*/
 484 #define CONFIG_SYS_HRCW_LOW (\
 485         HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\
 486         HRCWL_DDR_TO_SCB_CLK_1X1 |\
 487         HRCWL_CSB_TO_CLKIN |\
 488         HRCWL_VCO_1X4 |\
 489         HRCWL_CORE_TO_CSB_2X1)
 490 #elif 0 /*132/132*/
 491 #define CONFIG_SYS_HRCW_LOW (\
 492         HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\
 493         HRCWL_DDR_TO_SCB_CLK_1X1 |\
 494         HRCWL_CSB_TO_CLKIN |\
 495         HRCWL_VCO_1X4 |\
 496         HRCWL_CORE_TO_CSB_1X1)
 497 #elif 0 /*264/264 */
 498 #define CONFIG_SYS_HRCW_LOW (\
 499         HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\
 500         HRCWL_DDR_TO_SCB_CLK_1X1 |\
 501         HRCWL_CSB_TO_CLKIN |\
 502         HRCWL_VCO_1X4 |\
 503         HRCWL_CORE_TO_CSB_1X1)
 504 #endif
 505
 506 #if defined(PCI_64BIT)
 507 #define CONFIG_SYS_HRCW_HIGH (\
 508         HRCWH_PCI_HOST |\
 509         HRCWH_64_BIT_PCI |\
 510         HRCWH_PCI1_ARBITER_ENABLE |\
 511         HRCWH_PCI2_ARBITER_DISABLE |\
 512         HRCWH_CORE_ENABLE |\
 513         HRCWH_FROM_0X00000100 |\
 514         HRCWH_BOOTSEQ_DISABLE |\
 515         HRCWH_SW_WATCHDOG_DISABLE |\
 516         HRCWH_ROM_LOC_LOCAL_16BIT |\
 517         HRCWH_TSEC1M_IN_GMII |\
 518         HRCWH_TSEC2M_IN_GMII)
 519 #else
 520 #define CONFIG_SYS_HRCW_HIGH (\
 521         HRCWH_PCI_HOST |\
 522         HRCWH_32_BIT_PCI |\
 523         HRCWH_PCI1_ARBITER_ENABLE |\
 524         HRCWH_PCI2_ARBITER_ENABLE |\
 525         HRCWH_CORE_ENABLE |\
 526         HRCWH_FROM_0X00000100 |\
 527         HRCWH_BOOTSEQ_DISABLE |\
 528         HRCWH_SW_WATCHDOG_DISABLE |\
 529         HRCWH_ROM_LOC_LOCAL_16BIT |\
 530         HRCWH_TSEC1M_IN_GMII |\
 531         HRCWH_TSEC2M_IN_GMII)
 532 #endif
 533
 534 /* System IO Config */
 535 #define CONFIG_SYS_SICRH 0
 536 #define CONFIG_SYS_SICRL SICRL_LDP_A
 537
 538 #define CONFIG_SYS_HID0_INIT    0x000000000
 539 #define CONFIG_SYS_HID0_FINAL   (HID0_ENABLE_MACHINE_CHECK \
 540                                 | HID0_ENABLE_INSTRUCTION_CACHE)
 541
 542 /* #define CONFIG_SYS_HID0_FINAL        (\
 543         HID0_ENABLE_INSTRUCTION_CACHE |\
 544         HID0_ENABLE_M_BIT |\
 545         HID0_ENABLE_ADDRESS_BROADCAST) */
 546
 547
 548 #define CONFIG_SYS_HID2 HID2_HBE
 549
 550 #define CONFIG_HIGH_BATS        1       /* High BATs supported */
 551
 552 /* DDR @ 0x00000000 */
 553 #define CONFIG_SYS_IBAT0L       (CONFIG_SYS_SDRAM_BASE \
 554                                 | BATL_PP_10 \
 555                                 | BATL_MEMCOHERENCE)
 556 #define CONFIG_SYS_IBAT0U       (CONFIG_SYS_SDRAM_BASE \
 557                                 | BATU_BL_256M \
 558                                 | BATU_VS \
 559                                 | BATU_VP)
 560
 561 /* PCI @ 0x80000000 */
 562 #ifdef CONFIG_PCI
 563 #define CONFIG_SYS_IBAT1L       (CONFIG_SYS_PCI1_MEM_BASE \
 564                                 | BATL_PP_10 \
 565                                 | BATL_MEMCOHERENCE)
 566 #define CONFIG_SYS_IBAT1U       (CONFIG_SYS_PCI1_MEM_BASE \
 567                                 | BATU_BL_256M \
 568                                 | BATU_VS \
 569                                 | BATU_VP)
 570 #define CONFIG_SYS_IBAT2L       (CONFIG_SYS_PCI1_MMIO_BASE \
 571                                 | BATL_PP_10 \
 572                                 | BATL_CACHEINHIBIT \
 573                                 | BATL_GUARDEDSTORAGE)
 574 #define CONFIG_SYS_IBAT2U       (CONFIG_SYS_PCI1_MMIO_BASE \
 575                                 | BATU_BL_256M \
 576                                 | BATU_VS \
 577                                 | BATU_VP)
 578 #else
 579 #define CONFIG_SYS_IBAT1L       (0)
 580 #define CONFIG_SYS_IBAT1U       (0)
 581 #define CONFIG_SYS_IBAT2L       (0)
 582 #define CONFIG_SYS_IBAT2U       (0)
 583 #endif
 584
 585 #ifdef CONFIG_MPC83XX_PCI2
 586 #define CONFIG_SYS_IBAT3L       (CONFIG_SYS_PCI2_MEM_BASE \
 587                                 | BATL_PP_10 \
 588                                 | BATL_MEMCOHERENCE)
 589 #define CONFIG_SYS_IBAT3U       (CONFIG_SYS_PCI2_MEM_BASE \
 590                                 | BATU_BL_256M \
 591                                 | BATU_VS \
 592                                 | BATU_VP)
 593 #define CONFIG_SYS_IBAT4L       (CONFIG_SYS_PCI2_MMIO_BASE \
 594                                 | BATL_PP_10 \
 595                                 | BATL_CACHEINHIBIT \
 596                                 | BATL_GUARDEDSTORAGE)
 597 #define CONFIG_SYS_IBAT4U       (CONFIG_SYS_PCI2_MMIO_BASE \
 598                                 | BATU_BL_256M \
 599                                 | BATU_VS \
 600                                 | BATU_VP)
 601 #else
 602 #define CONFIG_SYS_IBAT3L       (0)
 603 #define CONFIG_SYS_IBAT3U       (0)
 604 #define CONFIG_SYS_IBAT4L       (0)
 605 #define CONFIG_SYS_IBAT4U       (0)
 606 #endif
 607
 608 /* IMMRBAR @ 0xE0000000, PCI IO @ 0xE2000000 */
 609 #define CONFIG_SYS_IBAT5L       (CONFIG_SYS_IMMR \
 610                                 | BATL_PP_10 \
 611                                 | BATL_CACHEINHIBIT \
 612                                 | BATL_GUARDEDSTORAGE)
 613 #define CONFIG_SYS_IBAT5U       (CONFIG_SYS_IMMR \
 614                                 | BATU_BL_256M \
 615                                 | BATU_VS \
 616                                 | BATU_VP)
 617
 618 /* SDRAM @ 0xF0000000, stack in DCACHE 0xFDF00000 & FLASH @ 0xFE000000 */
 619 #define CONFIG_SYS_IBAT6L       (0xF0000000 \
 620                                 | BATL_PP_10 \
 621                                 | BATL_MEMCOHERENCE \
 622                                 | BATL_GUARDEDSTORAGE)
 623 #define CONFIG_SYS_IBAT6U       (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
 624
 625 #define CONFIG_SYS_IBAT7L       (0)
 626 #define CONFIG_SYS_IBAT7U       (0)
 627
 628 #define CONFIG_SYS_DBAT0L       CONFIG_SYS_IBAT0L
 629 #define CONFIG_SYS_DBAT0U       CONFIG_SYS_IBAT0U
 630 #define CONFIG_SYS_DBAT1L       CONFIG_SYS_IBAT1L
 631 #define CONFIG_SYS_DBAT1U       CONFIG_SYS_IBAT1U
 632 #define CONFIG_SYS_DBAT2L       CONFIG_SYS_IBAT2L
 633 #define CONFIG_SYS_DBAT2U       CONFIG_SYS_IBAT2U
 634 #define CONFIG_SYS_DBAT3L       CONFIG_SYS_IBAT3L
 635 #define CONFIG_SYS_DBAT3U       CONFIG_SYS_IBAT3U
 636 #define CONFIG_SYS_DBAT4L       CONFIG_SYS_IBAT4L
 637 #define CONFIG_SYS_DBAT4U       CONFIG_SYS_IBAT4U
 638 #define CONFIG_SYS_DBAT5L       CONFIG_SYS_IBAT5L
 639 #define CONFIG_SYS_DBAT5U       CONFIG_SYS_IBAT5U
 640 #define CONFIG_SYS_DBAT6L       CONFIG_SYS_IBAT6L
 641 #define CONFIG_SYS_DBAT6U       CONFIG_SYS_IBAT6U
 642 #define CONFIG_SYS_DBAT7L       CONFIG_SYS_IBAT7L
 643 #define CONFIG_SYS_DBAT7U       CONFIG_SYS_IBAT7U
 644
 645 #if defined(CONFIG_CMD_KGDB)
 646 #define CONFIG_KGDB_BAUDRATE    230400  /* speed of kgdb serial port */
 647 #define CONFIG_KGDB_SER_INDEX   2       /* which serial port to use */
 648 #endif
 649
 650 /*
 651  * Environment Configuration
 652  */
 653 #define CONFIG_ENV_OVERWRITE
 654
 655 #if defined(CONFIG_TSEC_ENET)
 656 #define CONFIG_HAS_ETH0
 657 #define CONFIG_HAS_ETH1
 658 #endif
 659
 660 #define CONFIG_HOSTNAME         SBC8349
 661 #define CONFIG_ROOTPATH         "/tftpboot/rootfs"
 662 #define CONFIG_BOOTFILE         "uImage"
 663
 664                                 /* default location for tftp and bootm */
 665 #define CONFIG_LOADADDR         800000
 666
 667 #define CONFIG_BOOTDELAY        6       /* -1 disables auto-boot */
 668 #undef  CONFIG_BOOTARGS         /* the boot command will set bootargs */
 669
 670 #define CONFIG_BAUDRATE  115200
 671
 672 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
 673         "netdev=eth0\0"                                                 \
 674         "hostname=sbc8349\0"                                            \
 675         "nfsargs=setenv bootargs root=/dev/nfs rw "                     \
 676                 "nfsroot=${serverip}:${rootpath}\0"                     \
 677         "ramargs=setenv bootargs root=/dev/ram rw\0"                    \
 678         "addip=setenv bootargs ${bootargs} "                            \
 679                 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"      \
 680                 ":${hostname}:${netdev}:off panic=1\0"                  \
 681         "addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\
 682         "flash_nfs=run nfsargs addip addtty;"                           \
 683                 "bootm ${kernel_addr}\0"                                \
 684         "flash_self=run ramargs addip addtty;"                          \
 685                 "bootm ${kernel_addr} ${ramdisk_addr}\0"                \
 686         "net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;"     \
 687                 "bootm\0"                                               \
 688         "load=tftp 100000 /tftpboot/sbc8349/u-boot.bin\0"               \
 689         "update=protect off ff800000 ff83ffff; "                        \
 690                 "era ff800000 ff83ffff; cp.b 100000 ff800000 ${filesize}\0" \
 691         "upd=run load update\0"                                         \
 692         "fdtaddr=780000\0"                                              \
 693         "fdtfile=sbc8349.dtb\0"                                         \
 694         ""
 695
 696 #define CONFIG_NFSBOOTCOMMAND                                           \
 697         "setenv bootargs root=/dev/nfs rw "                             \
 698                 "nfsroot=$serverip:$rootpath "                          \
 699                 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:"   \
 700                                                         "$netdev:off "  \
 701                 "console=$consoledev,$baudrate $othbootargs;"           \
 702         "tftp $loadaddr $bootfile;"                                     \
 703         "tftp $fdtaddr $fdtfile;"                                       \
 704         "bootm $loadaddr - $fdtaddr"
 705
 706 #define CONFIG_RAMBOOTCOMMAND                                           \
 707         "setenv bootargs root=/dev/ram rw "                             \
 708                 "console=$consoledev,$baudrate $othbootargs;"           \
 709         "tftp $ramdiskaddr $ramdiskfile;"                               \
 710         "tftp $loadaddr $bootfile;"                                     \
 711         "tftp $fdtaddr $fdtfile;"                                       \
 712         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 713
 714 #define CONFIG_BOOTCOMMAND      "run flash_self"
 715
 716 #endif  /* __CONFIG_H */