include/configs/sbc8349.h

   1 /*
   2  * WindRiver SBC8349 U-Boot configuration file.
   3  * Copyright (c) 2006, 2007 Wind River Systems, Inc.
   4  *
   5  * Paul Gortmaker <paul.gortmaker@windriver.com>
   6  * Based on the MPC8349EMDS config.
   7  *
   8  * SPDX-License-Identifier:     GPL-2.0+
   9  */
  10
  11 /*
  12  * sbc8349 board configuration file.
  13  */
  14
  15 #ifndef __CONFIG_H
  16 #define __CONFIG_H
  17
  18 #define CONFIG_SYS_GENERIC_BOARD
  19 #define CONFIG_DISPLAY_BOARDINFO
  20
  21 /*
  22  * High Level Configuration Options
  23  */
  24 #define CONFIG_E300             1       /* E300 Family */
  25 #define CONFIG_MPC834x          1       /* MPC834x family */
  26 #define CONFIG_MPC8349          1       /* MPC8349 specific */
  27 #define CONFIG_SBC8349          1       /* WRS SBC8349 board specific */
  28
  29 #define CONFIG_SYS_TEXT_BASE    0xFF800000
  30
  31 /* Don't enable PCI2 on sbc834x - it doesn't exist physically. */
  32 #undef CONFIG_MPC83XX_PCI2              /* support for 2nd PCI controller */
  33
  34 /*
  35  * The default if PCI isn't enabled, or if no PCI clk setting is given
  36  * is 66MHz; this is what the board defaults to when the PCI slot is
  37  * physically empty.  The board will automatically (i.e w/o jumpers)
  38  * clock down to 33MHz if you insert a 33MHz PCI card.
  39  */
  40 #ifdef CONFIG_PCI_33M
  41 #define CONFIG_83XX_CLKIN       33000000        /* in Hz */
  42 #else   /* 66M */
  43 #define CONFIG_83XX_CLKIN       66000000        /* in Hz */
  44 #endif
  45
  46 #ifndef CONFIG_SYS_CLK_FREQ
  47 #ifdef CONFIG_PCI_33M
  48 #define CONFIG_SYS_CLK_FREQ     33000000
  49 #define HRCWL_CSB_TO_CLKIN      HRCWL_CSB_TO_CLKIN_8X1
  50 #else   /* 66M */
  51 #define CONFIG_SYS_CLK_FREQ     66000000
  52 #define HRCWL_CSB_TO_CLKIN      HRCWL_CSB_TO_CLKIN_4X1
  53 #endif
  54 #endif
  55
  56 #undef CONFIG_BOARD_EARLY_INIT_F                /* call board_pre_init */
  57
  58 #define CONFIG_SYS_IMMR         0xE0000000
  59
  60 #undef CONFIG_SYS_DRAM_TEST             /* memory test, takes time */
  61 #define CONFIG_SYS_MEMTEST_START        0x00000000      /* memtest region */
  62 #define CONFIG_SYS_MEMTEST_END          0x00100000
  63
  64 /*
  65  * DDR Setup
  66  */
  67 #undef CONFIG_DDR_ECC                   /* only for ECC DDR module */
  68 #undef CONFIG_DDR_ECC_CMD               /* use DDR ECC user commands */
  69 #define CONFIG_SPD_EEPROM               /* use SPD EEPROM for DDR setup*/
  70 #define CONFIG_SYS_83XX_DDR_USES_CS0    /* WRS; Fsl board uses CS2/CS3 */
  71
  72 /*
  73  * 32-bit data path mode.
  74  *
  75  * Please note that using this mode for devices with the real density of 64-bit
  76  * effectively reduces the amount of available memory due to the effect of
  77  * wrapping around while translating address to row/columns, for example in the
  78  * 256MB module the upper 128MB get aliased with contents of the lower
  79  * 128MB); normally this define should be used for devices with real 32-bit
  80  * data path.
  81  */
  82 #undef CONFIG_DDR_32BIT
  83
  84 #define CONFIG_SYS_DDR_BASE             0x00000000 /* DDR is system memory*/
  85 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_BASE
  86 #define CONFIG_SYS_DDR_SDRAM_BASE       CONFIG_SYS_DDR_BASE
  87 #define CONFIG_SYS_DDR_SDRAM_CLK_CNTL   (DDR_SDRAM_CLK_CNTL_SS_EN | \
  88                                 DDR_SDRAM_CLK_CNTL_CLK_ADJUST_075)
  89 #define CONFIG_DDR_2T_TIMING
  90
  91 #if defined(CONFIG_SPD_EEPROM)
  92 /*
  93  * Determine DDR configuration from I2C interface.
  94  */
  95 #define SPD_EEPROM_ADDRESS      0x52            /* DDR DIMM */
  96
  97 #else
  98 /*
  99  * Manually set up DDR parameters
 100  * NB: manual DDR setup untested on sbc834x
 101  */
 102 #define CONFIG_SYS_DDR_SIZE             256             /* MB */
 103 #define CONFIG_SYS_DDR_CS2_CONFIG       (CSCONFIG_EN \
 104                                         | CSCONFIG_ROW_BIT_13 \
 105                                         | CSCONFIG_COL_BIT_10)
 106 #define CONFIG_SYS_DDR_TIMING_1 0x36332321
 107 #define CONFIG_SYS_DDR_TIMING_2 0x00000800      /* P9-45,may need tuning */
 108 #define CONFIG_SYS_DDR_CONTROL  0xc2000000      /* unbuffered,no DYN_PWR */
 109 #define CONFIG_SYS_DDR_INTERVAL 0x04060100      /* autocharge,no open page */
 110
 111 #if defined(CONFIG_DDR_32BIT)
 112 /* set burst length to 8 for 32-bit data path */
 113                                 /* DLL,normal,seq,4/2.5, 8 burst len */
 114 #define CONFIG_SYS_DDR_MODE     0x00000023
 115 #else
 116 /* the default burst length is 4 - for 64-bit data path */
 117                                 /* DLL,normal,seq,4/2.5, 4 burst len */
 118 #define CONFIG_SYS_DDR_MODE     0x00000022
 119 #endif
 120 #endif
 121
 122 /*
 123  * SDRAM on the Local Bus
 124  */
 125 #define CONFIG_SYS_LBC_SDRAM_BASE       0xF0000000      /* Localbus SDRAM */
 126 #define CONFIG_SYS_LBC_SDRAM_SIZE       64              /* LBC SDRAM is 64MB */
 127
 128 /*
 129  * FLASH on the Local Bus
 130  */
 131 #define CONFIG_SYS_FLASH_CFI            /* use the Common Flash Interface */
 132 #define CONFIG_FLASH_CFI_DRIVER         /* use the CFI driver */
 133 #define CONFIG_SYS_FLASH_BASE           0xFF800000      /* start of FLASH   */
 134 #define CONFIG_SYS_FLASH_SIZE           8               /* flash size in MB */
 135 /* #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE */
 136
 137 #define CONFIG_SYS_BR0_PRELIM           (CONFIG_SYS_FLASH_BASE \
 138                                         | BR_PS_16      /* 16 bit port */ \
 139                                         | BR_MS_GPCM    /* MSEL = GPCM */ \
 140                                         | BR_V)         /* valid */
 141
 142 #define CONFIG_SYS_OR0_PRELIM           (MEG_TO_AM(CONFIG_SYS_FLASH_SIZE) \
 143                                         | OR_GPCM_XAM \
 144                                         | OR_GPCM_CSNT \
 145                                         | OR_GPCM_ACS_DIV2 \
 146                                         | OR_GPCM_XACS \
 147                                         | OR_GPCM_SCY_15 \
 148                                         | OR_GPCM_TRLX_SET \
 149                                         | OR_GPCM_EHTR_SET \
 150                                         | OR_GPCM_EAD)
 151                                         /* 0xFF806FF7 */
 152
 153                                         /* window base at flash base */
 154 #define CONFIG_SYS_LBLAWBAR0_PRELIM     CONFIG_SYS_FLASH_BASE
 155 #define CONFIG_SYS_LBLAWAR0_PRELIM      (LBLAWAR_EN | LBLAWAR_8MB)
 156
 157 #define CONFIG_SYS_MAX_FLASH_BANKS      1       /* number of banks */
 158 #define CONFIG_SYS_MAX_FLASH_SECT       64      /* sectors per device */
 159
 160 #undef CONFIG_SYS_FLASH_CHECKSUM
 161 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 162 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 163
 164 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
 165
 166 #if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
 167 #define CONFIG_SYS_RAMBOOT
 168 #else
 169 #undef  CONFIG_SYS_RAMBOOT
 170 #endif
 171
 172 #define CONFIG_SYS_INIT_RAM_LOCK        1
 173                                         /* Initial RAM address */
 174 #define CONFIG_SYS_INIT_RAM_ADDR        0xFD000000
 175                                         /* Size of used area in RAM*/
 176 #define CONFIG_SYS_INIT_RAM_SIZE        0x1000
 177
 178 #define CONFIG_SYS_GBL_DATA_OFFSET      \
 179                         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 180 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 181
 182 #define CONFIG_SYS_MONITOR_LEN  (256 * 1024)    /* Reserve 256 kB for Mon */
 183 #define CONFIG_SYS_MALLOC_LEN   (256 * 1024)    /* Reserved for malloc */
 184
 185 /*
 186  * Local Bus LCRR and LBCR regs
 187  *    LCRR:  DLL bypass, Clock divider is 4
 188  * External Local Bus rate is
 189  *    CLKIN * HRCWL_CSB_TO_CLKIN / HRCWL_LCL_BUS_TO_SCB_CLK / LCRR_CLKDIV
 190  */
 191 #define CONFIG_SYS_LCRR_DBYP    LCRR_DBYP
 192 #define CONFIG_SYS_LCRR_CLKDIV  LCRR_CLKDIV_4
 193 #define CONFIG_SYS_LBC_LBCR     0x00000000
 194
 195 #undef CONFIG_SYS_LB_SDRAM      /* if board has SDRAM on local bus */
 196
 197 #ifdef CONFIG_SYS_LB_SDRAM
 198 /* Local bus BR2, OR2 definition for SDRAM if soldered on the board*/
 199 /*
 200  * Base Register 2 and Option Register 2 configure SDRAM.
 201  * The SDRAM base address, CONFIG_SYS_LBC_SDRAM_BASE, is 0xf0000000.
 202  *
 203  * For BR2, need:
 204  *    Base address of 0xf0000000 = BR[0:16] = 1111 0000 0000 0000 0
 205  *    port-size = 32-bits = BR2[19:20] = 11
 206  *    no parity checking = BR2[21:22] = 00
 207  *    SDRAM for MSEL = BR2[24:26] = 011
 208  *    Valid = BR[31] = 1
 209  *
 210  * 0    4    8    12   16   20   24   28
 211  * 1111 0000 0000 0000 0001 1000 0110 0001 = F0001861
 212  */
 213
 214 #define CONFIG_SYS_BR2_PRELIM           (CONFIG_SYS_LBC_SDRAM_BASE \
 215                                         | BR_PS_32 \
 216                                         | BR_MS_SDRAM \
 217                                         | BR_V)
 218                                         /* 0xF0001861 */
 219 #define CONFIG_SYS_LBLAWBAR2_PRELIM     CONFIG_SYS_LBC_SDRAM_BASE
 220 #define CONFIG_SYS_LBLAWAR2_PRELIM      (LBLAWAR_EN | LBLAWAR_64MB)
 221
 222 /*
 223  * The SDRAM size in MB, CONFIG_SYS_LBC_SDRAM_SIZE, is 64.
 224  *
 225  * For OR2, need:
 226  *    64MB mask for AM, OR2[0:7] = 1111 1100
 227  *                 XAM, OR2[17:18] = 11
 228  *    9 columns OR2[19-21] = 010
 229  *    13 rows   OR2[23-25] = 100
 230  *    EAD set for extra time OR[31] = 1
 231  *
 232  * 0    4    8    12   16   20   24   28
 233  * 1111 1100 0000 0000 0110 1001 0000 0001 = FC006901
 234  */
 235
 236 #define CONFIG_SYS_OR2_PRELIM   (MEG_TO_AM(CONFIG_SYS_LBC_SDRAM_SIZE) \
 237                         | OR_SDRAM_XAM \
 238                         | ((9 - OR_SDRAM_MIN_COLS) << OR_SDRAM_COLS_SHIFT) \
 239                         | ((13 - OR_SDRAM_MIN_ROWS) << OR_SDRAM_ROWS_SHIFT) \
 240                         | OR_SDRAM_EAD)
 241                         /* 0xFC006901 */
 242
 243                                 /* LB sdram refresh timer, about 6us */
 244 #define CONFIG_SYS_LBC_LSRT     0x32000000
 245                                 /* LB refresh timer prescal, 266MHz/32 */
 246 #define CONFIG_SYS_LBC_MRTPR    0x20000000
 247
 248 #define CONFIG_SYS_LBC_LSDMR_COMMON     (LSDMR_RFEN \
 249                                         | LSDMR_BSMA1516 \
 250                                         | LSDMR_RFCR8 \
 251                                         | LSDMR_PRETOACT6 \
 252                                         | LSDMR_ACTTORW3 \
 253                                         | LSDMR_BL8 \
 254                                         | LSDMR_WRC3 \
 255                                         | LSDMR_CL3)
 256
 257 /*
 258  * SDRAM Controller configuration sequence.
 259  */
 260 #define CONFIG_SYS_LBC_LSDMR_1  (CONFIG_SYS_LBC_LSDMR_COMMON | LSDMR_OP_PCHALL)
 261 #define CONFIG_SYS_LBC_LSDMR_2  (CONFIG_SYS_LBC_LSDMR_COMMON | LSDMR_OP_ARFRSH)
 262 #define CONFIG_SYS_LBC_LSDMR_3  (CONFIG_SYS_LBC_LSDMR_COMMON | LSDMR_OP_ARFRSH)
 263 #define CONFIG_SYS_LBC_LSDMR_4  (CONFIG_SYS_LBC_LSDMR_COMMON | LSDMR_OP_MRW)
 264 #define CONFIG_SYS_LBC_LSDMR_5  (CONFIG_SYS_LBC_LSDMR_COMMON | LSDMR_OP_NORMAL)
 265 #endif
 266
 267 /*
 268  * Serial Port
 269  */
 270 #define CONFIG_CONS_INDEX     1
 271 #define CONFIG_SYS_NS16550
 272 #define CONFIG_SYS_NS16550_SERIAL
 273 #define CONFIG_SYS_NS16550_REG_SIZE    1
 274 #define CONFIG_SYS_NS16550_CLK          get_bus_freq(0)
 275
 276 #define CONFIG_SYS_BAUDRATE_TABLE  \
 277                 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200}
 278
 279 #define CONFIG_SYS_NS16550_COM1        (CONFIG_SYS_IMMR+0x4500)
 280 #define CONFIG_SYS_NS16550_COM2        (CONFIG_SYS_IMMR+0x4600)
 281
 282 #define CONFIG_CMDLINE_EDITING  1       /* add command line history     */
 283 #define CONFIG_AUTO_COMPLETE            /* add autocompletion support   */
 284 /* Use the HUSH parser */
 285 #define CONFIG_SYS_HUSH_PARSER
 286
 287 /* pass open firmware flat tree */
 288 #define CONFIG_OF_LIBFDT        1
 289 #define CONFIG_OF_BOARD_SETUP   1
 290 #define CONFIG_OF_STDOUT_VIA_ALIAS      1
 291
 292 /* I2C */
 293 #define CONFIG_SYS_I2C
 294 #define CONFIG_SYS_I2C_FSL
 295 #define CONFIG_SYS_FSL_I2C_SPEED        400000
 296 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 297 #define CONFIG_SYS_FSL_I2C_OFFSET       0x3000
 298 #define CONFIG_SYS_FSL_I2C2_SPEED       400000
 299 #define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
 300 #define CONFIG_SYS_FSL_I2C2_OFFSET      0x3100
 301 #define CONFIG_SYS_I2C_NOPROBES         { {0, 0x69}, {1, 0x69} }
 302 /* could also use CONFIG_I2C_MULTI_BUS and CONFIG_SYS_SPD_BUS_NUM... */
 303
 304 /* TSEC */
 305 #define CONFIG_SYS_TSEC1_OFFSET 0x24000
 306 #define CONFIG_SYS_TSEC1        (CONFIG_SYS_IMMR+CONFIG_SYS_TSEC1_OFFSET)
 307 #define CONFIG_SYS_TSEC2_OFFSET 0x25000
 308 #define CONFIG_SYS_TSEC2        (CONFIG_SYS_IMMR+CONFIG_SYS_TSEC2_OFFSET)
 309
 310 /*
 311  * General PCI
 312  * Addresses are mapped 1-1.
 313  */
 314 #define CONFIG_SYS_PCI1_MEM_BASE        0x80000000
 315 #define CONFIG_SYS_PCI1_MEM_PHYS        CONFIG_SYS_PCI1_MEM_BASE
 316 #define CONFIG_SYS_PCI1_MEM_SIZE        0x10000000      /* 256M */
 317 #define CONFIG_SYS_PCI1_MMIO_BASE       0x90000000
 318 #define CONFIG_SYS_PCI1_MMIO_PHYS       CONFIG_SYS_PCI1_MMIO_BASE
 319 #define CONFIG_SYS_PCI1_MMIO_SIZE       0x10000000      /* 256M */
 320 #define CONFIG_SYS_PCI1_IO_BASE         0x00000000
 321 #define CONFIG_SYS_PCI1_IO_PHYS         0xE2000000
 322 #define CONFIG_SYS_PCI1_IO_SIZE         0x00100000      /* 1M */
 323
 324 #define CONFIG_SYS_PCI2_MEM_BASE        0xA0000000
 325 #define CONFIG_SYS_PCI2_MEM_PHYS        CONFIG_SYS_PCI2_MEM_BASE
 326 #define CONFIG_SYS_PCI2_MEM_SIZE        0x10000000      /* 256M */
 327 #define CONFIG_SYS_PCI2_MMIO_BASE       0xB0000000
 328 #define CONFIG_SYS_PCI2_MMIO_PHYS       CONFIG_SYS_PCI2_MMIO_BASE
 329 #define CONFIG_SYS_PCI2_MMIO_SIZE       0x10000000      /* 256M */
 330 #define CONFIG_SYS_PCI2_IO_BASE         0x00000000
 331 #define CONFIG_SYS_PCI2_IO_PHYS         0xE2100000
 332 #define CONFIG_SYS_PCI2_IO_SIZE         0x00100000      /* 1M */
 333
 334 #if defined(CONFIG_PCI)
 335
 336 #define PCI_64BIT
 337 #define PCI_ONE_PCI1
 338 #if defined(PCI_64BIT)
 339 #undef PCI_ALL_PCI1
 340 #undef PCI_TWO_PCI1
 341 #undef PCI_ONE_PCI1
 342 #endif
 343
 344 #define CONFIG_PCI_PNP          /* do pci plug-and-play */
 345
 346 #undef CONFIG_EEPRO100
 347 #undef CONFIG_TULIP
 348
 349 #if !defined(CONFIG_PCI_PNP)
 350         #define PCI_ENET0_IOADDR        0xFIXME
 351         #define PCI_ENET0_MEMADDR       0xFIXME
 352         #define PCI_IDSEL_NUMBER        0xFIXME
 353 #endif
 354
 355 #undef CONFIG_PCI_SCAN_SHOW             /* show pci devices on startup */
 356 #define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1057  /* Motorola */
 357
 358 #endif  /* CONFIG_PCI */
 359
 360 /*
 361  * TSEC configuration
 362  */
 363 #define CONFIG_TSEC_ENET                /* TSEC ethernet support */
 364
 365 #if defined(CONFIG_TSEC_ENET)
 366
 367 #define CONFIG_TSEC1    1
 368 #define CONFIG_TSEC1_NAME       "TSEC0"
 369 #define CONFIG_TSEC2    1
 370 #define CONFIG_TSEC2_NAME       "TSEC1"
 371 #define CONFIG_PHY_BCM5421S     1
 372 #define TSEC1_PHY_ADDR          0x19
 373 #define TSEC2_PHY_ADDR          0x1a
 374 #define TSEC1_PHYIDX            0
 375 #define TSEC2_PHYIDX            0
 376 #define TSEC1_FLAGS             TSEC_GIGABIT
 377 #define TSEC2_FLAGS             TSEC_GIGABIT
 378
 379 /* Options are: TSEC[0-1] */
 380 #define CONFIG_ETHPRIME         "TSEC0"
 381
 382 #endif  /* CONFIG_TSEC_ENET */
 383
 384 /*
 385  * Environment
 386  */
 387 #ifndef CONFIG_SYS_RAMBOOT
 388         #define CONFIG_ENV_IS_IN_FLASH  1
 389         #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE + 0x40000)
 390         #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K(one sector) for env */
 391         #define CONFIG_ENV_SIZE         0x2000
 392
 393 /* Address and size of Redundant Environment Sector     */
 394 #define CONFIG_ENV_ADDR_REDUND  (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE)
 395 #define CONFIG_ENV_SIZE_REDUND  (CONFIG_ENV_SIZE)
 396
 397 #else
 398         #define CONFIG_SYS_NO_FLASH     1       /* Flash is not usable now */
 399         #define CONFIG_ENV_IS_NOWHERE   1       /* Store ENV in memory only */
 400         #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - 0x1000)
 401         #define CONFIG_ENV_SIZE         0x2000
 402 #endif
 403
 404 #define CONFIG_LOADS_ECHO       1       /* echo on for serial download */
 405 #define CONFIG_SYS_LOADS_BAUD_CHANGE    1       /* allow baudrate change */
 406
 407
 408 /*
 409  * BOOTP options
 410  */
 411 #define CONFIG_BOOTP_BOOTFILESIZE
 412 #define CONFIG_BOOTP_BOOTPATH
 413 #define CONFIG_BOOTP_GATEWAY
 414 #define CONFIG_BOOTP_HOSTNAME
 415
 416
 417 /*
 418  * Command line configuration.
 419  */
 420 #define CONFIG_CMD_I2C
 421 #define CONFIG_CMD_MII
 422 #define CONFIG_CMD_PING
 423
 424 #if defined(CONFIG_PCI)
 425     #define CONFIG_CMD_PCI
 426 #endif
 427
 428 #undef CONFIG_WATCHDOG                  /* watchdog disabled */
 429
 430 /*
 431  * Miscellaneous configurable options
 432  */
 433 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 434 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 435
 436 #if defined(CONFIG_CMD_KGDB)
 437         #define CONFIG_SYS_CBSIZE       1024    /* Console I/O Buffer Size */
 438 #else
 439         #define CONFIG_SYS_CBSIZE       256     /* Console I/O Buffer Size */
 440 #endif
 441
 442                                 /* Print Buffer Size */
 443 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
 444 #define CONFIG_SYS_MAXARGS      16      /* max number of command args */
 445                                 /* Boot Argument Buffer Size */
 446 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE
 447
 448 /*
 449  * For booting Linux, the board info and command line data
 450  * have to be in the first 256 MB of memory, since this is
 451  * the maximum mapped by the Linux kernel during initialization.
 452  */
 453                                 /* Initial Memory map for Linux*/
 454 #define CONFIG_SYS_BOOTMAPSZ    (256 << 20)
 455
 456 #define CONFIG_SYS_RCWH_PCIHOST 0x80000000 /* PCIHOST  */
 457
 458 #if 1 /*528/264*/
 459 #define CONFIG_SYS_HRCW_LOW (\
 460         HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\
 461         HRCWL_DDR_TO_SCB_CLK_1X1 |\
 462         HRCWL_CSB_TO_CLKIN |\
 463         HRCWL_VCO_1X2 |\
 464         HRCWL_CORE_TO_CSB_2X1)
 465 #elif 0 /*396/132*/
 466 #define CONFIG_SYS_HRCW_LOW (\
 467         HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\
 468         HRCWL_DDR_TO_SCB_CLK_1X1 |\
 469         HRCWL_CSB_TO_CLKIN |\
 470         HRCWL_VCO_1X4 |\
 471         HRCWL_CORE_TO_CSB_3X1)
 472 #elif 0 /*264/132*/
 473 #define CONFIG_SYS_HRCW_LOW (\
 474         HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\
 475         HRCWL_DDR_TO_SCB_CLK_1X1 |\
 476         HRCWL_CSB_TO_CLKIN |\
 477         HRCWL_VCO_1X4 |\
 478         HRCWL_CORE_TO_CSB_2X1)
 479 #elif 0 /*132/132*/
 480 #define CONFIG_SYS_HRCW_LOW (\
 481         HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\
 482         HRCWL_DDR_TO_SCB_CLK_1X1 |\
 483         HRCWL_CSB_TO_CLKIN |\
 484         HRCWL_VCO_1X4 |\
 485         HRCWL_CORE_TO_CSB_1X1)
 486 #elif 0 /*264/264 */
 487 #define CONFIG_SYS_HRCW_LOW (\
 488         HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\
 489         HRCWL_DDR_TO_SCB_CLK_1X1 |\
 490         HRCWL_CSB_TO_CLKIN |\
 491         HRCWL_VCO_1X4 |\
 492         HRCWL_CORE_TO_CSB_1X1)
 493 #endif
 494
 495 #if defined(PCI_64BIT)
 496 #define CONFIG_SYS_HRCW_HIGH (\
 497         HRCWH_PCI_HOST |\
 498         HRCWH_64_BIT_PCI |\
 499         HRCWH_PCI1_ARBITER_ENABLE |\
 500         HRCWH_PCI2_ARBITER_DISABLE |\
 501         HRCWH_CORE_ENABLE |\
 502         HRCWH_FROM_0X00000100 |\
 503         HRCWH_BOOTSEQ_DISABLE |\
 504         HRCWH_SW_WATCHDOG_DISABLE |\
 505         HRCWH_ROM_LOC_LOCAL_16BIT |\
 506         HRCWH_TSEC1M_IN_GMII |\
 507         HRCWH_TSEC2M_IN_GMII)
 508 #else
 509 #define CONFIG_SYS_HRCW_HIGH (\
 510         HRCWH_PCI_HOST |\
 511         HRCWH_32_BIT_PCI |\
 512         HRCWH_PCI1_ARBITER_ENABLE |\
 513         HRCWH_PCI2_ARBITER_ENABLE |\
 514         HRCWH_CORE_ENABLE |\
 515         HRCWH_FROM_0X00000100 |\
 516         HRCWH_BOOTSEQ_DISABLE |\
 517         HRCWH_SW_WATCHDOG_DISABLE |\
 518         HRCWH_ROM_LOC_LOCAL_16BIT |\
 519         HRCWH_TSEC1M_IN_GMII |\
 520         HRCWH_TSEC2M_IN_GMII)
 521 #endif
 522
 523 /* System IO Config */
 524 #define CONFIG_SYS_SICRH 0
 525 #define CONFIG_SYS_SICRL SICRL_LDP_A
 526
 527 #define CONFIG_SYS_HID0_INIT    0x000000000
 528 #define CONFIG_SYS_HID0_FINAL   (HID0_ENABLE_MACHINE_CHECK \
 529                                 | HID0_ENABLE_INSTRUCTION_CACHE)
 530
 531 /* #define CONFIG_SYS_HID0_FINAL        (\
 532         HID0_ENABLE_INSTRUCTION_CACHE |\
 533         HID0_ENABLE_M_BIT |\
 534         HID0_ENABLE_ADDRESS_BROADCAST) */
 535
 536
 537 #define CONFIG_SYS_HID2 HID2_HBE
 538
 539 #define CONFIG_HIGH_BATS        1       /* High BATs supported */
 540
 541 /* DDR @ 0x00000000 */
 542 #define CONFIG_SYS_IBAT0L       (CONFIG_SYS_SDRAM_BASE \
 543                                 | BATL_PP_RW \
 544                                 | BATL_MEMCOHERENCE)
 545 #define CONFIG_SYS_IBAT0U       (CONFIG_SYS_SDRAM_BASE \
 546                                 | BATU_BL_256M \
 547                                 | BATU_VS \
 548                                 | BATU_VP)
 549
 550 /* PCI @ 0x80000000 */
 551 #ifdef CONFIG_PCI
 552 #define CONFIG_PCI_INDIRECT_BRIDGE
 553 #define CONFIG_SYS_IBAT1L       (CONFIG_SYS_PCI1_MEM_BASE \
 554                                 | BATL_PP_RW \
 555                                 | BATL_MEMCOHERENCE)
 556 #define CONFIG_SYS_IBAT1U       (CONFIG_SYS_PCI1_MEM_BASE \
 557                                 | BATU_BL_256M \
 558                                 | BATU_VS \
 559                                 | BATU_VP)
 560 #define CONFIG_SYS_IBAT2L       (CONFIG_SYS_PCI1_MMIO_BASE \
 561                                 | BATL_PP_RW \
 562                                 | BATL_CACHEINHIBIT \
 563                                 | BATL_GUARDEDSTORAGE)
 564 #define CONFIG_SYS_IBAT2U       (CONFIG_SYS_PCI1_MMIO_BASE \
 565                                 | BATU_BL_256M \
 566                                 | BATU_VS \
 567                                 | BATU_VP)
 568 #else
 569 #define CONFIG_SYS_IBAT1L       (0)
 570 #define CONFIG_SYS_IBAT1U       (0)
 571 #define CONFIG_SYS_IBAT2L       (0)
 572 #define CONFIG_SYS_IBAT2U       (0)
 573 #endif
 574
 575 #ifdef CONFIG_MPC83XX_PCI2
 576 #define CONFIG_SYS_IBAT3L       (CONFIG_SYS_PCI2_MEM_BASE \
 577                                 | BATL_PP_RW \
 578                                 | BATL_MEMCOHERENCE)
 579 #define CONFIG_SYS_IBAT3U       (CONFIG_SYS_PCI2_MEM_BASE \
 580                                 | BATU_BL_256M \
 581                                 | BATU_VS \
 582                                 | BATU_VP)
 583 #define CONFIG_SYS_IBAT4L       (CONFIG_SYS_PCI2_MMIO_BASE \
 584                                 | BATL_PP_RW \
 585                                 | BATL_CACHEINHIBIT \
 586                                 | BATL_GUARDEDSTORAGE)
 587 #define CONFIG_SYS_IBAT4U       (CONFIG_SYS_PCI2_MMIO_BASE \
 588                                 | BATU_BL_256M \
 589                                 | BATU_VS \
 590                                 | BATU_VP)
 591 #else
 592 #define CONFIG_SYS_IBAT3L       (0)
 593 #define CONFIG_SYS_IBAT3U       (0)
 594 #define CONFIG_SYS_IBAT4L       (0)
 595 #define CONFIG_SYS_IBAT4U       (0)
 596 #endif
 597
 598 /* IMMRBAR @ 0xE0000000, PCI IO @ 0xE2000000 */
 599 #define CONFIG_SYS_IBAT5L       (CONFIG_SYS_IMMR \
 600                                 | BATL_PP_RW \
 601                                 | BATL_CACHEINHIBIT \
 602                                 | BATL_GUARDEDSTORAGE)
 603 #define CONFIG_SYS_IBAT5U       (CONFIG_SYS_IMMR \
 604                                 | BATU_BL_256M \
 605                                 | BATU_VS \
 606                                 | BATU_VP)
 607
 608 /* LBC SDRAM @ 0xF0000000, stack in DCACHE 0xFDF00000 & FLASH @ 0xFE000000 */
 609 #define CONFIG_SYS_IBAT6L       (CONFIG_SYS_LBC_SDRAM_BASE \
 610                                 | BATL_PP_RW \
 611                                 | BATL_MEMCOHERENCE \
 612                                 | BATL_GUARDEDSTORAGE)
 613 #define CONFIG_SYS_IBAT6U       (CONFIG_SYS_LBC_SDRAM_BASE \
 614                                 | BATU_BL_256M \
 615                                 | BATU_VS \
 616                                 | BATU_VP)
 617
 618 #define CONFIG_SYS_IBAT7L       (0)
 619 #define CONFIG_SYS_IBAT7U       (0)
 620
 621 #define CONFIG_SYS_DBAT0L       CONFIG_SYS_IBAT0L
 622 #define CONFIG_SYS_DBAT0U       CONFIG_SYS_IBAT0U
 623 #define CONFIG_SYS_DBAT1L       CONFIG_SYS_IBAT1L
 624 #define CONFIG_SYS_DBAT1U       CONFIG_SYS_IBAT1U
 625 #define CONFIG_SYS_DBAT2L       CONFIG_SYS_IBAT2L
 626 #define CONFIG_SYS_DBAT2U       CONFIG_SYS_IBAT2U
 627 #define CONFIG_SYS_DBAT3L       CONFIG_SYS_IBAT3L
 628 #define CONFIG_SYS_DBAT3U       CONFIG_SYS_IBAT3U
 629 #define CONFIG_SYS_DBAT4L       CONFIG_SYS_IBAT4L
 630 #define CONFIG_SYS_DBAT4U       CONFIG_SYS_IBAT4U
 631 #define CONFIG_SYS_DBAT5L       CONFIG_SYS_IBAT5L
 632 #define CONFIG_SYS_DBAT5U       CONFIG_SYS_IBAT5U
 633 #define CONFIG_SYS_DBAT6L       CONFIG_SYS_IBAT6L
 634 #define CONFIG_SYS_DBAT6U       CONFIG_SYS_IBAT6U
 635 #define CONFIG_SYS_DBAT7L       CONFIG_SYS_IBAT7L
 636 #define CONFIG_SYS_DBAT7U       CONFIG_SYS_IBAT7U
 637
 638 #if defined(CONFIG_CMD_KGDB)
 639 #define CONFIG_KGDB_BAUDRATE    230400  /* speed of kgdb serial port */
 640 #endif
 641
 642 /*
 643  * Environment Configuration
 644  */
 645 #define CONFIG_ENV_OVERWRITE
 646
 647 #if defined(CONFIG_TSEC_ENET)
 648 #define CONFIG_HAS_ETH0
 649 #define CONFIG_HAS_ETH1
 650 #endif
 651
 652 #define CONFIG_HOSTNAME         SBC8349
 653 #define CONFIG_ROOTPATH         "/tftpboot/rootfs"
 654 #define CONFIG_BOOTFILE         "uImage"
 655
 656                                 /* default location for tftp and bootm */
 657 #define CONFIG_LOADADDR         800000
 658
 659 #define CONFIG_BOOTDELAY        6       /* -1 disables auto-boot */
 660 #undef  CONFIG_BOOTARGS         /* the boot command will set bootargs */
 661
 662 #define CONFIG_BAUDRATE  115200
 663
 664 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
 665         "netdev=eth0\0"                                                 \
 666         "hostname=sbc8349\0"                                            \
 667         "nfsargs=setenv bootargs root=/dev/nfs rw "                     \
 668                 "nfsroot=${serverip}:${rootpath}\0"                     \
 669         "ramargs=setenv bootargs root=/dev/ram rw\0"                    \
 670         "addip=setenv bootargs ${bootargs} "                            \
 671                 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"      \
 672                 ":${hostname}:${netdev}:off panic=1\0"                  \
 673         "addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\
 674         "flash_nfs=run nfsargs addip addtty;"                           \
 675                 "bootm ${kernel_addr}\0"                                \
 676         "flash_self=run ramargs addip addtty;"                          \
 677                 "bootm ${kernel_addr} ${ramdisk_addr}\0"                \
 678         "net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;"     \
 679                 "bootm\0"                                               \
 680         "load=tftp 100000 /tftpboot/sbc8349/u-boot.bin\0"               \
 681         "update=protect off ff800000 ff83ffff; "                        \
 682                 "era ff800000 ff83ffff; cp.b 100000 ff800000 ${filesize}\0" \
 683         "upd=run load update\0"                                         \
 684         "fdtaddr=780000\0"                                              \
 685         "fdtfile=sbc8349.dtb\0"                                         \
 686         ""
 687
 688 #define CONFIG_NFSBOOTCOMMAND                                           \
 689         "setenv bootargs root=/dev/nfs rw "                             \
 690                 "nfsroot=$serverip:$rootpath "                          \
 691                 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:"   \
 692                                                         "$netdev:off "  \
 693                 "console=$consoledev,$baudrate $othbootargs;"           \
 694         "tftp $loadaddr $bootfile;"                                     \
 695         "tftp $fdtaddr $fdtfile;"                                       \
 696         "bootm $loadaddr - $fdtaddr"
 697
 698 #define CONFIG_RAMBOOTCOMMAND                                           \
 699         "setenv bootargs root=/dev/ram rw "                             \
 700                 "console=$consoledev,$baudrate $othbootargs;"           \
 701         "tftp $ramdiskaddr $ramdiskfile;"                               \
 702         "tftp $loadaddr $bootfile;"                                     \
 703         "tftp $fdtaddr $fdtfile;"                                       \
 704         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 705
 706 #define CONFIG_BOOTCOMMAND      "run flash_self"
 707
 708 #endif  /* __CONFIG_H */