include/configs/sbc8548.h

   1 /*
   2  * Copyright 2007,2009 Wind River Systems <www.windriver.com>
   3  * Copyright 2007 Embedded Specialties, Inc.
   4  * Copyright 2004, 2007 Freescale Semiconductor.
   5  *
   6  * See file CREDITS for list of people who contributed to this
   7  * project.
   8  *
   9  * This program is free software; you can redistribute it and/or
  10  * modify it under the terms of the GNU General Public License as
  11  * published by the Free Software Foundation; either version 2 of
  12  * the License, or (at your option) any later version.
  13  *
  14  * This program is distributed in the hope that it will be useful,
  15  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  16  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  17  * GNU General Public License for more details.
  18  *
  19  * You should have received a copy of the GNU General Public License
  20  * along with this program; if not, write to the Free Software
  21  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  22  * MA 02111-1307 USA
  23  */
  24
  25 /*
  26  * sbc8548 board configuration file
  27  * Please refer to doc/README.sbc8548 for more info.
  28  */
  29 #ifndef __CONFIG_H
  30 #define __CONFIG_H
  31
  32 /*
  33  * Top level Makefile configuration choices
  34  */
  35 #ifdef CONFIG_PCI
  36 #define CONFIG_PCI1
  37 #endif
  38
  39 #ifdef CONFIG_66
  40 #define CONFIG_SYS_CLK_DIV 1
  41 #endif
  42
  43 #ifdef CONFIG_33
  44 #define CONFIG_SYS_CLK_DIV 2
  45 #endif
  46
  47 #ifdef CONFIG_PCIE
  48 #define CONFIG_PCIE1
  49 #endif
  50
  51 /*
  52  * High Level Configuration Options
  53  */
  54 #define CONFIG_BOOKE            1       /* BOOKE */
  55 #define CONFIG_E500             1       /* BOOKE e500 family */
  56 #define CONFIG_MPC85xx          1       /* MPC8540/60/55/41/48 */
  57 #define CONFIG_MPC8548          1       /* MPC8548 specific */
  58 #define CONFIG_SBC8548          1       /* SBC8548 board specific */
  59
  60 /*
  61  * If you want to boot from the SODIMM flash, instead of the soldered
  62  * on flash, set this, and change JP12, SW2:8 accordingly.
  63  */
  64 #undef CONFIG_SYS_ALT_BOOT
  65
  66 #ifndef CONFIG_SYS_TEXT_BASE
  67 #ifdef CONFIG_SYS_ALT_BOOT
  68 #define CONFIG_SYS_TEXT_BASE    0xfff00000
  69 #else
  70 #define CONFIG_SYS_TEXT_BASE    0xfffa0000
  71 #endif
  72 #endif
  73
  74 #undef CONFIG_RIO
  75
  76 #ifdef CONFIG_PCI
  77 #define CONFIG_FSL_PCI_INIT             /* Use common FSL init code */
  78 #define CONFIG_SYS_PCI_64BIT    1       /* enable 64-bit PCI resources */
  79 #endif
  80 #ifdef CONFIG_PCIE1
  81 #define CONFIG_FSL_PCIE_RESET   1       /* need PCIe reset errata */
  82 #endif
  83
  84 #define CONFIG_TSEC_ENET                /* tsec ethernet support */
  85 #define CONFIG_ENV_OVERWRITE
  86
  87 #define CONFIG_INTERRUPTS               /* enable pci, srio, ddr interrupts */
  88
  89 #define CONFIG_FSL_LAW          1       /* Use common FSL init code */
  90
  91 /*
  92  * Below assumes that CCB:SYSCLK remains unchanged at 6:1 via SW2:[1-4]
  93  */
  94 #ifndef CONFIG_SYS_CLK_DIV
  95 #define CONFIG_SYS_CLK_DIV      1       /* 2, if 33MHz PCI card installed */
  96 #endif
  97 #define CONFIG_SYS_CLK_FREQ     (66000000 / CONFIG_SYS_CLK_DIV)
  98
  99 /*
 100  * These can be toggled for performance analysis, otherwise use default.
 101  */
 102 #define CONFIG_L2_CACHE                 /* toggle L2 cache */
 103 #define CONFIG_BTB                      /* toggle branch predition */
 104
 105 /*
 106  * Only possible on E500 Version 2 or newer cores.
 107  */
 108 #define CONFIG_ENABLE_36BIT_PHYS        1
 109
 110 #define CONFIG_BOARD_EARLY_INIT_F       1       /* Call board_pre_init */
 111
 112 #undef  CONFIG_SYS_DRAM_TEST                    /* memory test, takes time */
 113 #define CONFIG_SYS_MEMTEST_START        0x00200000      /* memtest works on */
 114 #define CONFIG_SYS_MEMTEST_END          0x00400000
 115
 116 #define CONFIG_SYS_CCSRBAR              0xe0000000
 117 #define CONFIG_SYS_CCSRBAR_PHYS_LOW     CONFIG_SYS_CCSRBAR
 118
 119 /* DDR Setup */
 120 #define CONFIG_FSL_DDR2
 121 #undef CONFIG_FSL_DDR_INTERACTIVE
 122 #undef CONFIG_DDR_ECC                   /* only for ECC DDR module */
 123 /*
 124  * A hardware errata caused the LBC SDRAM SPD and the DDR2 SPD
 125  * to collide, meaning you couldn't reliably read either. So
 126  * physically remove the LBC PC100 SDRAM module from the board
 127  * before enabling the two SPD options below, or check that you
 128  * have the hardware fix on your board via "i2c probe" and looking
 129  * for a device at 0x53.
 130  */
 131 #undef CONFIG_SPD_EEPROM                /* Use SPD EEPROM for DDR setup */
 132 #undef CONFIG_DDR_SPD
 133
 134 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER       /* DDR controller or DMA? */
 135 #define CONFIG_MEM_INIT_VALUE   0xDeadBeef
 136
 137 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 138 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 139 #define CONFIG_VERY_BIG_RAM
 140
 141 #define CONFIG_NUM_DDR_CONTROLLERS      1
 142 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
 143 #define CONFIG_CHIP_SELECTS_PER_CTRL    2
 144
 145 /*
 146  * The hardware fix for the I2C address collision puts the DDR
 147  * SPD at 0x53, but if we are running on an older board w/o the
 148  * fix, it will still be at 0x51.  We check 0x53 1st.
 149  */
 150 #define SPD_EEPROM_ADDRESS      0x51    /* CTLR 0 DIMM 0 */
 151 #define ALT_SPD_EEPROM_ADDRESS  0x53    /* CTLR 0 DIMM 0 */
 152
 153 /*
 154  * Make sure required options are set
 155  */
 156 #ifndef CONFIG_SPD_EEPROM
 157         #define CONFIG_SYS_SDRAM_SIZE   256             /* DDR is 256MB */
 158         #define CONFIG_SYS_DDR_CONTROL  0xc300c000
 159 #endif
 160
 161 #undef CONFIG_CLOCKS_IN_MHZ
 162
 163 /*
 164  * FLASH on the Local Bus
 165  * Two banks, one 8MB the other 64MB, using the CFI driver.
 166  * JP12+SW2.8 are used to swap CS0 and CS6, defaults are to have
 167  * CS0 the 8MB boot flash, and CS6 the 64MB flash.
 168  *
 169  *      Default:
 170  *      ec00_0000       efff_ffff       64MB SODIMM
 171  *      ff80_0000       ffff_ffff       8MB soldered flash
 172  *
 173  *      Alternate:
 174  *      ef80_0000       efff_ffff       8MB soldered flash
 175  *      fc00_0000       ffff_ffff       64MB SODIMM
 176  *
 177  * BR0_8M:
 178  *    Base address 0 = 0xff80_0000 = BR0[0:16] = 1111 1111 1000 0000 0
 179  *    Port Size = 8 bits = BRx[19:20] = 01
 180  *    Use GPCM = BRx[24:26] = 000
 181  *    Valid = BRx[31] = 1
 182  *
 183  * BR0_64M:
 184  *    Base address 0 = 0xfc00_0000 = BR0[0:16] = 1111 1100 0000 0000 0
 185  *    Port Size = 32 bits = BRx[19:20] = 11
 186  *
 187  * 0    4    8    12   16   20   24   28
 188  * 1111 1111 1000 0000 0000 1000 0000 0001 = ff800801    BR0_8M
 189  * 1111 1100 0000 0000 0001 1000 0000 0001 = fc001801    BR0_64M
 190  */
 191 #define CONFIG_SYS_BR0_8M       0xff800801
 192 #define CONFIG_SYS_BR0_64M      0xfc001801
 193
 194 /*
 195  * BR6_8M:
 196  *    Base address 6 = 0xef80_0000 = BR6[0:16] = 1110 1111 1000 0000 0
 197  *    Port Size = 8 bits = BRx[19:20] = 01
 198  *    Use GPCM = BRx[24:26] = 000
 199  *    Valid = BRx[31] = 1
 200
 201  * BR6_64M:
 202  *    Base address 6 = 0xec00_0000 = BR6[0:16] = 1110 1100 0000 0000 0
 203  *    Port Size = 32 bits = BRx[19:20] = 11
 204  *
 205  * 0    4    8    12   16   20   24   28
 206  * 1110 1111 1000 0000 0000 1000 0000 0001 = ef800801    BR6_8M
 207  * 1110 1100 0000 0000 0001 1000 0000 0001 = ec001801    BR6_64M
 208  */
 209 #define CONFIG_SYS_BR6_8M       0xef800801
 210 #define CONFIG_SYS_BR6_64M      0xec001801
 211
 212 /*
 213  * OR0_8M:
 214  *    Addr Mask = 8M = OR1[0:16] = 1111 1111 1000 0000 0
 215  *    XAM = OR0[17:18] = 11
 216  *    CSNT = OR0[20] = 1
 217  *    ACS = half cycle delay = OR0[21:22] = 11
 218  *    SCY = 6 = OR0[24:27] = 0110
 219  *    TRLX = use relaxed timing = OR0[29] = 1
 220  *    EAD = use external address latch delay = OR0[31] = 1
 221  *
 222  * OR0_64M:
 223  *    Addr Mask = 64M = OR1[0:16] = 1111 1100 0000 0000 0
 224  *
 225  *
 226  * 0    4    8    12   16   20   24   28
 227  * 1111 1111 1000 0000 0110 1110 0110 0101 = ff806e65    OR0_8M
 228  * 1111 1100 0000 0000 0110 1110 0110 0101 = fc006e65    OR0_64M
 229  */
 230 #define CONFIG_SYS_OR0_8M       0xff806e65
 231 #define CONFIG_SYS_OR0_64M      0xfc006e65
 232
 233 /*
 234  * OR6_8M:
 235  *    Addr Mask = 8M = OR6[0:16] = 1111 1111 1000 0000 0
 236  *    XAM = OR6[17:18] = 11
 237  *    CSNT = OR6[20] = 1
 238  *    ACS = half cycle delay = OR6[21:22] = 11
 239  *    SCY = 6 = OR6[24:27] = 0110
 240  *    TRLX = use relaxed timing = OR6[29] = 1
 241  *    EAD = use external address latch delay = OR6[31] = 1
 242  *
 243  * OR6_64M:
 244  *    Addr Mask = 64M = OR6[0:16] = 1111 1100 0000 0000 0
 245  *
 246  * 0    4    8    12   16   20   24   28
 247  * 1111 1111 1000 0000 0110 1110 0110 0101 = ff806e65    OR6_8M
 248  * 1111 1100 0000 0000 0110 1110 0110 0101 = fc006e65    OR6_64M
 249  */
 250 #define CONFIG_SYS_OR6_8M       0xff806e65
 251 #define CONFIG_SYS_OR6_64M      0xfc006e65
 252
 253 #ifndef CONFIG_SYS_ALT_BOOT             /* JP12 in default position */
 254 #define CONFIG_SYS_BOOT_BLOCK           0xff800000      /* start of 8MB Flash */
 255 #define CONFIG_SYS_ALT_FLASH            0xec000000      /* 64MB "user" flash */
 256
 257 #define CONFIG_SYS_BR0_PRELIM           CONFIG_SYS_BR0_8M
 258 #define CONFIG_SYS_OR0_PRELIM           CONFIG_SYS_OR0_8M
 259
 260 #define CONFIG_SYS_BR6_PRELIM           CONFIG_SYS_BR6_64M
 261 #define CONFIG_SYS_OR6_PRELIM           CONFIG_SYS_OR6_64M
 262 #else                                   /* JP12 in alternate position */
 263 #define CONFIG_SYS_BOOT_BLOCK           0xfc000000      /* start 64MB Flash */
 264 #define CONFIG_SYS_ALT_FLASH            0xef800000      /* 8MB soldered flash */
 265
 266 #define CONFIG_SYS_BR0_PRELIM           CONFIG_SYS_BR0_64M
 267 #define CONFIG_SYS_OR0_PRELIM           CONFIG_SYS_OR0_64M
 268
 269 #define CONFIG_SYS_BR6_PRELIM           CONFIG_SYS_BR6_8M
 270 #define CONFIG_SYS_OR6_PRELIM           CONFIG_SYS_OR6_8M
 271 #endif
 272
 273 #define CONFIG_SYS_FLASH_BASE           CONFIG_SYS_BOOT_BLOCK
 274 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE, \
 275                                          CONFIG_SYS_ALT_FLASH}
 276 #define CONFIG_SYS_MAX_FLASH_BANKS      2               /* number of banks */
 277 #define CONFIG_SYS_MAX_FLASH_SECT       256             /* sectors per device */
 278 #undef  CONFIG_SYS_FLASH_CHECKSUM
 279 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 280 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 281
 282 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
 283
 284 #define CONFIG_FLASH_CFI_DRIVER
 285 #define CONFIG_SYS_FLASH_CFI
 286 #define CONFIG_SYS_FLASH_EMPTY_INFO
 287
 288 /* CS5 = Local bus peripherals controlled by the EPLD */
 289
 290 #define CONFIG_SYS_BR5_PRELIM           0xf8000801
 291 #define CONFIG_SYS_OR5_PRELIM           0xff006e65
 292 #define CONFIG_SYS_EPLD_BASE            0xf8000000
 293 #define CONFIG_SYS_LED_DISP_BASE        0xf8000000
 294 #define CONFIG_SYS_USER_SWITCHES_BASE   0xf8100000
 295 #define CONFIG_SYS_BD_REV               0xf8300000
 296 #define CONFIG_SYS_EEPROM_BASE          0xf8b00000
 297
 298 /*
 299  * SDRAM on the Local Bus (CS3 and CS4)
 300  * Note that most boards have a hardware errata where both the
 301  * LBC SDRAM and the DDR2 SDRAM decode at 0x51, making it impossible
 302  * to use CONFIG_DDR_SPD unless you physically remove the LBC DIMM.
 303  * A hardware workaround is also available, see README.sbc8548 file.
 304  */
 305 #define CONFIG_SYS_LBC_SDRAM_BASE       0xf0000000      /* Localbus SDRAM */
 306 #define CONFIG_SYS_LBC_SDRAM_SIZE       128             /* LBC SDRAM is 128MB */
 307
 308 /*
 309  * Base Register 3 and Option Register 3 configure the 1st 1/2 SDRAM.
 310  * The SDRAM base address, CONFIG_SYS_LBC_SDRAM_BASE, is 0xf0000000.
 311  *
 312  * For BR3, need:
 313  *    Base address of 0xf0000000 = BR[0:16] = 1111 0000 0000 0000 0
 314  *    port-size = 32-bits = BR2[19:20] = 11
 315  *    no parity checking = BR2[21:22] = 00
 316  *    SDRAM for MSEL = BR2[24:26] = 011
 317  *    Valid = BR[31] = 1
 318  *
 319  * 0    4    8    12   16   20   24   28
 320  * 1111 0000 0000 0000 0001 1000 0110 0001 = f0001861
 321  *
 322  */
 323
 324 #define CONFIG_SYS_BR3_PRELIM           0xf0001861
 325
 326 /*
 327  * The SDRAM size in MB, of 1/2 CONFIG_SYS_LBC_SDRAM_SIZE, is 64.
 328  *
 329  * For OR3, need:
 330  *    64MB mask for AM, OR3[0:7] = 1111 1100
 331  *                 XAM, OR3[17:18] = 11
 332  *    10 columns OR3[19-21] = 011
 333  *    12 rows   OR3[23-25] = 011
 334  *    EAD set for extra time OR[31] = 0
 335  *
 336  * 0    4    8    12   16   20   24   28
 337  * 1111 1100 0000 0000 0110 1100 1100 0000 = fc006cc0
 338  */
 339
 340 #define CONFIG_SYS_OR3_PRELIM           0xfc006cc0
 341
 342 /*
 343  * Base Register 4 and Option Register 4 configure the 2nd 1/2 SDRAM.
 344  * The base address, (SDRAM_BASE + 1/2*SIZE), is 0xf4000000.
 345  *
 346  * For BR4, need:
 347  *    Base address of 0xf4000000 = BR[0:16] = 1111 0100 0000 0000 0
 348  *    port-size = 32-bits = BR2[19:20] = 11
 349  *    no parity checking = BR2[21:22] = 00
 350  *    SDRAM for MSEL = BR2[24:26] = 011
 351  *    Valid = BR[31] = 1
 352  *
 353  * 0    4    8    12   16   20   24   28
 354  * 1111 0000 0000 0000 0001 1000 0110 0001 = f4001861
 355  *
 356  */
 357
 358 #define CONFIG_SYS_BR4_PRELIM           0xf4001861
 359
 360 /*
 361  * The SDRAM size in MB, of 1/2 CONFIG_SYS_LBC_SDRAM_SIZE, is 64.
 362  *
 363  * For OR4, need:
 364  *    64MB mask for AM, OR3[0:7] = 1111 1100
 365  *                 XAM, OR3[17:18] = 11
 366  *    10 columns OR3[19-21] = 011
 367  *    12 rows   OR3[23-25] = 011
 368  *    EAD set for extra time OR[31] = 0
 369  *
 370  * 0    4    8    12   16   20   24   28
 371  * 1111 1100 0000 0000 0110 1100 1100 0000 = fc006cc0
 372  */
 373
 374 #define CONFIG_SYS_OR4_PRELIM           0xfc006cc0
 375
 376 #define CONFIG_SYS_LBC_LCRR             0x00000002    /* LB clock ratio reg */
 377 #define CONFIG_SYS_LBC_LBCR             0x00000000    /* LB config reg */
 378 #define CONFIG_SYS_LBC_LSRT             0x20000000  /* LB sdram refresh timer */
 379 #define CONFIG_SYS_LBC_MRTPR            0x00000000  /* LB refresh timer prescal*/
 380
 381 /*
 382  * Common settings for all Local Bus SDRAM commands.
 383  */
 384 #define CONFIG_SYS_LBC_LSDMR_COMMON     ( LSDMR_RFCR16          \
 385                                 | LSDMR_BSMA1516        \
 386                                 | LSDMR_PRETOACT3       \
 387                                 | LSDMR_ACTTORW3        \
 388                                 | LSDMR_BUFCMD          \
 389                                 | LSDMR_BL8             \
 390                                 | LSDMR_WRC2            \
 391                                 | LSDMR_CL3             \
 392                                 )
 393
 394 #define CONFIG_SYS_LBC_LSDMR_PCHALL     \
 395          (CONFIG_SYS_LBC_LSDMR_COMMON | LSDMR_OP_PCHALL)
 396 #define CONFIG_SYS_LBC_LSDMR_ARFRSH     \
 397          (CONFIG_SYS_LBC_LSDMR_COMMON | LSDMR_OP_ARFRSH)
 398 #define CONFIG_SYS_LBC_LSDMR_MRW        \
 399          (CONFIG_SYS_LBC_LSDMR_COMMON | LSDMR_OP_MRW)
 400 #define CONFIG_SYS_LBC_LSDMR_RFEN       \
 401          (CONFIG_SYS_LBC_LSDMR_COMMON | LSDMR_RFEN)
 402
 403 #define CONFIG_SYS_INIT_RAM_LOCK        1
 404 #define CONFIG_SYS_INIT_RAM_ADDR        0xe4010000      /* Initial RAM address */
 405 #define CONFIG_SYS_INIT_RAM_SIZE        0x4000          /* Size of used area in RAM */
 406
 407 #define CONFIG_SYS_INIT_L2_ADDR 0xf8f80000      /* relocate boot L2SRAM */
 408
 409 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 410 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 411
 412 /*
 413  * For soldered on flash, (128kB/sector) we use 2 sectors for u-boot and
 414  * one for env+bootpg (CONFIG_SYS_TEXT_BASE=0xfffa_0000, 384kB total).  For SODIMM
 415  * flash (512kB/sector) we use 1 sector for u-boot, and one for env+bootpg
 416  * (CONFIG_SYS_TEXT_BASE=0xfff0_0000, 1MB total).  This dynamically sets the right
 417  * thing for MONITOR_LEN in both cases.
 418  */
 419 #define CONFIG_SYS_MONITOR_LEN          (~CONFIG_SYS_TEXT_BASE + 1)
 420 #define CONFIG_SYS_MALLOC_LEN           (1024 * 1024) /* Reserved for malloc */
 421
 422 /* Serial Port */
 423 #define CONFIG_CONS_INDEX       1
 424 #define CONFIG_SYS_NS16550
 425 #define CONFIG_SYS_NS16550_SERIAL
 426 #define CONFIG_SYS_NS16550_REG_SIZE     1
 427 #define CONFIG_SYS_NS16550_CLK          (400000000 / CONFIG_SYS_CLK_DIV)
 428
 429 #define CONFIG_SYS_BAUDRATE_TABLE \
 430         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
 431
 432 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500)
 433 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600)
 434
 435 /* Use the HUSH parser */
 436 #define CONFIG_SYS_HUSH_PARSER
 437
 438 /* pass open firmware flat tree */
 439 #define CONFIG_OF_LIBFDT                1
 440 #define CONFIG_OF_BOARD_SETUP           1
 441 #define CONFIG_OF_STDOUT_VIA_ALIAS      1
 442
 443 /*
 444  * I2C
 445  */
 446 #define CONFIG_FSL_I2C          /* Use FSL common I2C driver */
 447 #define CONFIG_HARD_I2C         /* I2C with hardware support*/
 448 #undef  CONFIG_SOFT_I2C         /* I2C bit-banged */
 449 #define CONFIG_SYS_I2C_SPEED            400000  /* I2C speed and slave address */
 450 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x50
 451 #define CONFIG_SYS_I2C_SLAVE            0x7F
 452 #define CONFIG_SYS_I2C_OFFSET           0x3000
 453
 454 /*
 455  * General PCI
 456  * Memory space is mapped 1-1, but I/O space must start from 0.
 457  */
 458 #define CONFIG_SYS_PCI_VIRT             0x80000000      /* 1G PCI TLB */
 459 #define CONFIG_SYS_PCI_PHYS             0x80000000      /* 1G PCI TLB */
 460
 461 #define CONFIG_SYS_PCI1_MEM_VIRT        0x80000000
 462 #define CONFIG_SYS_PCI1_MEM_BUS         0x80000000
 463 #define CONFIG_SYS_PCI1_MEM_PHYS        0x80000000
 464 #define CONFIG_SYS_PCI1_MEM_SIZE        0x20000000      /* 512M */
 465 #define CONFIG_SYS_PCI1_IO_VIRT         0xe2000000
 466 #define CONFIG_SYS_PCI1_IO_BUS          0x00000000
 467 #define CONFIG_SYS_PCI1_IO_PHYS         0xe2000000
 468 #define CONFIG_SYS_PCI1_IO_SIZE         0x00800000      /* 8M */
 469
 470 #ifdef CONFIG_PCIE1
 471 #define CONFIG_SYS_PCIE1_MEM_VIRT       0xa0000000
 472 #define CONFIG_SYS_PCIE1_MEM_BUS        0xa0000000
 473 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xa0000000
 474 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x20000000      /* 512M */
 475 #define CONFIG_SYS_PCIE1_IO_VIRT        0xe2800000
 476 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
 477 #define CONFIG_SYS_PCIE1_IO_PHYS        0xe2800000
 478 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00800000      /* 8M */
 479 #endif
 480
 481 #ifdef CONFIG_RIO
 482 /*
 483  * RapidIO MMU
 484  */
 485 #define CONFIG_SYS_RIO_MEM_BASE 0xC0000000
 486 #define CONFIG_SYS_RIO_MEM_SIZE 0x20000000      /* 512M */
 487 #endif
 488
 489 #if defined(CONFIG_PCI)
 490
 491 #define CONFIG_PCI_PNP                  /* do pci plug-and-play */
 492
 493 #undef CONFIG_EEPRO100
 494 #undef CONFIG_TULIP
 495
 496 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 497
 498 #endif  /* CONFIG_PCI */
 499
 500
 501 #if defined(CONFIG_TSEC_ENET)
 502
 503 #define CONFIG_MII              1       /* MII PHY management */
 504 #define CONFIG_TSEC1    1
 505 #define CONFIG_TSEC1_NAME       "eTSEC0"
 506 #define CONFIG_TSEC2    1
 507 #define CONFIG_TSEC2_NAME       "eTSEC1"
 508 #undef CONFIG_MPC85XX_FEC
 509
 510 #define TSEC1_PHY_ADDR          0x19
 511 #define TSEC2_PHY_ADDR          0x1a
 512
 513 #define TSEC1_PHYIDX            0
 514 #define TSEC2_PHYIDX            0
 515
 516 #define TSEC1_FLAGS             TSEC_GIGABIT
 517 #define TSEC2_FLAGS             TSEC_GIGABIT
 518
 519 /* Options are: eTSEC[0-3] */
 520 #define CONFIG_ETHPRIME         "eTSEC0"
 521 #define CONFIG_PHY_GIGE         1       /* Include GbE speed/duplex detection */
 522 #endif  /* CONFIG_TSEC_ENET */
 523
 524 /*
 525  * Environment
 526  */
 527 #define CONFIG_ENV_IS_IN_FLASH  1
 528 #define CONFIG_ENV_SIZE         0x2000
 529 #if CONFIG_SYS_TEXT_BASE == 0xfff00000  /* Boot from 64MB SODIMM */
 530 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE + 0x80000)
 531 #define CONFIG_ENV_SECT_SIZE    0x80000 /* 512K(one sector) for env */
 532 #elif CONFIG_SYS_TEXT_BASE == 0xfffa0000        /* Boot from 8MB soldered flash */
 533 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE + 0x40000)
 534 #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K(one sector) for env */
 535 #else
 536 #warning undefined environment size/location.
 537 #endif
 538
 539 #define CONFIG_LOADS_ECHO       1       /* echo on for serial download */
 540 #define CONFIG_SYS_LOADS_BAUD_CHANGE    1       /* allow baudrate change */
 541
 542 /*
 543  * BOOTP options
 544  */
 545 #define CONFIG_BOOTP_BOOTFILESIZE
 546 #define CONFIG_BOOTP_BOOTPATH
 547 #define CONFIG_BOOTP_GATEWAY
 548 #define CONFIG_BOOTP_HOSTNAME
 549
 550
 551 /*
 552  * Command line configuration.
 553  */
 554 #include <config_cmd_default.h>
 555
 556 #define CONFIG_CMD_PING
 557 #define CONFIG_CMD_I2C
 558 #define CONFIG_CMD_MII
 559 #define CONFIG_CMD_ELF
 560 #define CONFIG_CMD_REGINFO
 561
 562 #if defined(CONFIG_PCI)
 563     #define CONFIG_CMD_PCI
 564 #endif
 565
 566
 567 #undef CONFIG_WATCHDOG                  /* watchdog disabled */
 568
 569 /*
 570  * Miscellaneous configurable options
 571  */
 572 #define CONFIG_CMDLINE_EDITING                  /* undef to save memory */
 573 #define CONFIG_AUTO_COMPLETE                    /* add autocompletion support */
 574 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 575 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 576 #define CONFIG_SYS_PROMPT       "=> "           /* Monitor Command Prompt */
 577 #if defined(CONFIG_CMD_KGDB)
 578 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O Buffer Size */
 579 #else
 580 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size */
 581 #endif
 582 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
 583 #define CONFIG_SYS_MAXARGS      16              /* max number of command args */
 584 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE       /* Boot Argument Buffer Size */
 585 #define CONFIG_SYS_HZ           1000            /* decrementer freq: 1ms ticks */
 586
 587 /*
 588  * For booting Linux, the board info and command line data
 589  * have to be in the first 8 MB of memory, since this is
 590  * the maximum mapped by the Linux kernel during initialization.
 591  */
 592 #define CONFIG_SYS_BOOTMAPSZ    (8 << 20)       /* Initial Memory map for Linux*/
 593
 594 #if defined(CONFIG_CMD_KGDB)
 595 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 596 #define CONFIG_KGDB_SER_INDEX   2       /* which serial port to use */
 597 #endif
 598
 599 /*
 600  * Environment Configuration
 601  */
 602
 603 /* The mac addresses for all ethernet interface */
 604 #if defined(CONFIG_TSEC_ENET)
 605 #define CONFIG_HAS_ETH0
 606 #define CONFIG_ETHADDR   02:E0:0C:00:00:FD
 607 #define CONFIG_HAS_ETH1
 608 #define CONFIG_ETH1ADDR  02:E0:0C:00:01:FD
 609 #endif
 610
 611 #define CONFIG_IPADDR    192.168.0.55
 612
 613 #define CONFIG_HOSTNAME  sbc8548
 614 #define CONFIG_ROOTPATH  "/opt/eldk/ppc_85xx"
 615 #define CONFIG_BOOTFILE  "/uImage"
 616 #define CONFIG_UBOOTPATH /u-boot.bin    /* TFTP server */
 617
 618 #define CONFIG_SERVERIP  192.168.0.2
 619 #define CONFIG_GATEWAYIP 192.168.0.1
 620 #define CONFIG_NETMASK   255.255.255.0
 621
 622 #define CONFIG_LOADADDR 1000000 /*default location for tftp and bootm*/
 623
 624 #define CONFIG_BOOTDELAY 10     /* -1 disables auto-boot */
 625 #undef  CONFIG_BOOTARGS         /* the boot command will set bootargs*/
 626
 627 #define CONFIG_BAUDRATE 115200
 628
 629 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 630  "netdev=eth0\0"                                                \
 631  "uboot=" MK_STR(CONFIG_UBOOTPATH) "\0"                         \
 632  "tftpflash=tftpboot $loadaddr $uboot; "                        \
 633         "protect off " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; "     \
 634         "erase " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; "           \
 635         "cp.b $loadaddr " MK_STR(CONFIG_SYS_TEXT_BASE) " $filesize; "   \
 636         "protect on " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; "              \
 637         "cmp.b $loadaddr " MK_STR(CONFIG_SYS_TEXT_BASE) " $filesize\0"  \
 638  "consoledev=ttyS0\0"                           \
 639  "ramdiskaddr=2000000\0"                        \
 640  "ramdiskfile=uRamdisk\0"                       \
 641  "fdtaddr=c00000\0"                             \
 642  "fdtfile=sbc8548.dtb\0"
 643
 644 #define CONFIG_NFSBOOTCOMMAND                                           \
 645    "setenv bootargs root=/dev/nfs rw "                                  \
 646       "nfsroot=$serverip:$rootpath "                                    \
 647       "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 648       "console=$consoledev,$baudrate $othbootargs;"                     \
 649    "tftp $loadaddr $bootfile;"                                          \
 650    "tftp $fdtaddr $fdtfile;"                                            \
 651    "bootm $loadaddr - $fdtaddr"
 652
 653
 654 #define CONFIG_RAMBOOTCOMMAND \
 655    "setenv bootargs root=/dev/ram rw "                                  \
 656       "console=$consoledev,$baudrate $othbootargs;"                     \
 657    "tftp $ramdiskaddr $ramdiskfile;"                                    \
 658    "tftp $loadaddr $bootfile;"                                          \
 659    "tftp $fdtaddr $fdtfile;"                                            \
 660    "bootm $loadaddr $ramdiskaddr $fdtaddr"
 661
 662 #define CONFIG_BOOTCOMMAND      CONFIG_RAMBOOTCOMMAND
 663
 664 #endif  /* __CONFIG_H */