include/configs/sbc8641d.h

   1 /*
   2  * Copyright 2007 Wind River Systems <www.windriver.com>
   3  * Copyright 2007 Embedded Specialties, Inc.
   4  * Joe Hamman <joe.hamman@embeddedspecialties.com>
   5  *
   6  * Copyright 2006 Freescale Semiconductor.
   7  *
   8  * Srikanth Srinivasan (srikanth.srinivasan@freescale.com)
   9  *
  10  * See file CREDITS for list of people who contributed to this
  11  * project.
  12  *
  13  * This program is free software; you can redistribute it and/or
  14  * modify it under the terms of the GNU General Public License as
  15  * published by the Free Software Foundation; either version 2 of
  16  * the License, or (at your option) any later version.
  17  *
  18  * This program is distributed in the hope that it will be useful,
  19  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  20  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  21  * GNU General Public License for more details.
  22  *
  23  * You should have received a copy of the GNU General Public License
  24  * along with this program; if not, write to the Free Software
  25  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  26  * MA 02111-1307 USA
  27  */
  28
  29 /*
  30  * SBC8641D board configuration file
  31  *
  32  * Make sure you change the MAC address and other network params first,
  33  * search for CONFIG_ETHADDR, CONFIG_SERVERIP, etc in this file.
  34  */
  35
  36 #ifndef __CONFIG_H
  37 #define __CONFIG_H
  38
  39 /* High Level Configuration Options */
  40 #define CONFIG_MPC86xx          1       /* MPC86xx */
  41 #define CONFIG_MPC8641          1       /* MPC8641 specific */
  42 #define CONFIG_SBC8641D         1       /* SBC8641D board specific */
  43 #define CONFIG_MP               1       /* support multiple processors */
  44 #define CONFIG_LINUX_RESET_VEC  0x100   /* Reset vector used by Linux */
  45
  46 #ifdef RUN_DIAG
  47 #define CONFIG_SYS_DIAG_ADDR        0xff800000
  48 #endif
  49
  50 #define CONFIG_SYS_RESET_ADDRESS    0xfff00100
  51
  52 /*
  53  * virtual address to be used for temporary mappings.  There
  54  * should be 128k free at this VA.
  55  */
  56 #define CONFIG_SYS_SCRATCH_VA   0xe8000000
  57
  58 #define CONFIG_PCI              1       /* Enable PCIE */
  59 #define CONFIG_PCI1             1       /* PCIE controler 1 (slot 1) */
  60 #define CONFIG_PCI2             1       /* PCIE controler 2 (slot 2) */
  61 #define CONFIG_FSL_PCI_INIT     1       /* Use common FSL init code */
  62 #define CONFIG_FSL_LAW          1       /* Use common FSL init code */
  63
  64 #define CONFIG_TSEC_ENET                /* tsec ethernet support */
  65 #define CONFIG_ENV_OVERWRITE
  66
  67 #define CONFIG_HIGH_BATS        1       /* High BATs supported and enabled */
  68
  69 #undef CONFIG_SPD_EEPROM                /* Do not use SPD EEPROM for DDR setup*/
  70 #undef CONFIG_DDR_ECC                   /* only for ECC DDR module */
  71 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER       /* DDR controller or DMA? */
  72 #define CONFIG_MEM_INIT_VALUE           0xDeadBeef
  73 #define CONFIG_NUM_DDR_CONTROLLERS     2
  74 #define CACHE_LINE_INTERLEAVING         0x20000000
  75 #define PAGE_INTERLEAVING               0x21000000
  76 #define BANK_INTERLEAVING               0x22000000
  77 #define SUPER_BANK_INTERLEAVING         0x23000000
  78
  79
  80 #define CONFIG_ALTIVEC          1
  81
  82 /*
  83  * L2CR setup -- make sure this is right for your board!
  84  */
  85 #define CONFIG_SYS_L2
  86 #define L2_INIT         0
  87 #define L2_ENABLE       (L2CR_L2E)
  88
  89 #ifndef CONFIG_SYS_CLK_FREQ
  90 #define CONFIG_SYS_CLK_FREQ     get_board_sys_clk(0)
  91 #endif
  92
  93 #define CONFIG_BOARD_EARLY_INIT_F       1       /* Call board_pre_init */
  94
  95 #undef  CONFIG_SYS_DRAM_TEST                            /* memory test, takes time */
  96 #define CONFIG_SYS_MEMTEST_START        0x00200000      /* memtest region */
  97 #define CONFIG_SYS_MEMTEST_END          0x00400000
  98
  99 /*
 100  * Base addresses -- Note these are effective addresses where the
 101  * actual resources get mapped (not physical addresses)
 102  */
 103 #define CONFIG_SYS_CCSRBAR_DEFAULT      0xff700000      /* CCSRBAR Default */
 104 #define CONFIG_SYS_CCSRBAR              0xf8000000      /* relocated CCSRBAR */
 105 #define CONFIG_SYS_IMMR         CONFIG_SYS_CCSRBAR      /* PQII uses CONFIG_SYS_IMMR */
 106
 107 #define CONFIG_SYS_CCSRBAR_PHYS_LOW     CONFIG_SYS_CCSRBAR
 108 #define CONFIG_SYS_CCSRBAR_PHYS_HIGH    0x0
 109 #define CONFIG_SYS_CCSRBAR_PHYS         CONFIG_SYS_CCSRBAR_PHYS_LOW
 110
 111 #define CONFIG_SYS_PCI1_ADDR            (CONFIG_SYS_CCSRBAR+0x8000)
 112 #define CONFIG_SYS_PCI2_ADDR            (CONFIG_SYS_CCSRBAR+0x9000)
 113
 114 /*
 115  * DDR Setup
 116  */
 117 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000      /* DDR is system memory */
 118 #define CONFIG_SYS_DDR_SDRAM_BASE2      0x10000000      /* DDR bank 2 */
 119 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 120 #define CONFIG_SYS_SDRAM_BASE2          CONFIG_SYS_DDR_SDRAM_BASE2
 121 #define CONFIG_SYS_MAX_DDR_BAT_SIZE     0x80000000      /* BAT mapping size */
 122 #define CONFIG_VERY_BIG_RAM
 123
 124 #define CONFIG_NUM_DDR_CONTROLLERS      2
 125 #define CONFIG_DIMM_SLOTS_PER_CTLR      2
 126 #define CONFIG_CHIP_SELECTS_PER_CTRL    (2 * CONFIG_DIMM_SLOTS_PER_CTLR)
 127
 128 #if defined(CONFIG_SPD_EEPROM)
 129     /*
 130      * Determine DDR configuration from I2C interface.
 131      */
 132     #define SPD_EEPROM_ADDRESS1         0x51            /* DDR DIMM */
 133     #define SPD_EEPROM_ADDRESS2         0x52            /* DDR DIMM */
 134     #define SPD_EEPROM_ADDRESS3         0x53            /* DDR DIMM */
 135     #define SPD_EEPROM_ADDRESS4         0x54            /* DDR DIMM */
 136
 137 #else
 138     /*
 139      * Manually set up DDR1 & DDR2 parameters
 140      */
 141
 142     #define CONFIG_SYS_SDRAM_SIZE       512             /* DDR is 512MB */
 143
 144     #define CONFIG_SYS_DDR_CS0_BNDS     0x0000000F
 145     #define CONFIG_SYS_DDR_CS1_BNDS     0x00000000
 146     #define CONFIG_SYS_DDR_CS2_BNDS     0x00000000
 147     #define CONFIG_SYS_DDR_CS3_BNDS     0x00000000
 148     #define CONFIG_SYS_DDR_CS0_CONFIG   0x80010102
 149     #define CONFIG_SYS_DDR_CS1_CONFIG   0x00000000
 150     #define CONFIG_SYS_DDR_CS2_CONFIG   0x00000000
 151     #define CONFIG_SYS_DDR_CS3_CONFIG   0x00000000
 152     #define CONFIG_SYS_DDR_TIMING_3 0x00000000
 153     #define CONFIG_SYS_DDR_TIMING_0     0x00220802
 154     #define CONFIG_SYS_DDR_TIMING_1     0x38377322
 155     #define CONFIG_SYS_DDR_TIMING_2     0x002040c7
 156     #define CONFIG_SYS_DDR_CFG_1A       0x43008008
 157     #define CONFIG_SYS_DDR_CFG_2        0x24401000
 158     #define CONFIG_SYS_DDR_MODE_1       0x23c00542
 159     #define CONFIG_SYS_DDR_MODE_2       0x00000000
 160     #define CONFIG_SYS_DDR_MODE_CTL     0x00000000
 161     #define CONFIG_SYS_DDR_INTERVAL     0x05080100
 162     #define CONFIG_SYS_DDR_DATA_INIT    0x00000000
 163     #define CONFIG_SYS_DDR_CLK_CTRL     0x03800000
 164     #define CONFIG_SYS_DDR_CFG_1B       0xC3008008
 165
 166     #define CONFIG_SYS_DDR2_CS0_BNDS    0x0010001F
 167     #define CONFIG_SYS_DDR2_CS1_BNDS    0x00000000
 168     #define CONFIG_SYS_DDR2_CS2_BNDS    0x00000000
 169     #define CONFIG_SYS_DDR2_CS3_BNDS    0x00000000
 170     #define CONFIG_SYS_DDR2_CS0_CONFIG  0x80010102
 171     #define CONFIG_SYS_DDR2_CS1_CONFIG  0x00000000
 172     #define CONFIG_SYS_DDR2_CS2_CONFIG  0x00000000
 173     #define CONFIG_SYS_DDR2_CS3_CONFIG  0x00000000
 174     #define CONFIG_SYS_DDR2_EXT_REFRESH 0x00000000
 175     #define CONFIG_SYS_DDR2_TIMING_0    0x00220802
 176     #define CONFIG_SYS_DDR2_TIMING_1    0x38377322
 177     #define CONFIG_SYS_DDR2_TIMING_2    0x002040c7
 178     #define CONFIG_SYS_DDR2_CFG_1A      0x43008008
 179     #define CONFIG_SYS_DDR2_CFG_2       0x24401000
 180     #define CONFIG_SYS_DDR2_MODE_1      0x23c00542
 181     #define CONFIG_SYS_DDR2_MODE_2      0x00000000
 182     #define CONFIG_SYS_DDR2_MODE_CTL    0x00000000
 183     #define CONFIG_SYS_DDR2_INTERVAL    0x05080100
 184     #define CONFIG_SYS_DDR2_DATA_INIT   0x00000000
 185     #define CONFIG_SYS_DDR2_CLK_CTRL    0x03800000
 186     #define CONFIG_SYS_DDR2_CFG_1B      0xC3008008
 187
 188
 189 #endif
 190
 191 /* #define CONFIG_ID_EEPROM     1
 192 #define ID_EEPROM_ADDR 0x57 */
 193
 194 /*
 195  * The SBC8641D contains 16MB flash space at ff000000.
 196  */
 197 #define CONFIG_SYS_FLASH_BASE      0xff000000  /* start of FLASH 16M */
 198
 199 /* Flash */
 200 #define CONFIG_SYS_BR0_PRELIM           0xff001001      /* port size 16bit */
 201 #define CONFIG_SYS_OR0_PRELIM           0xff006e65      /* 16MB Boot Flash area */
 202
 203 /* 64KB EEPROM */
 204 #define CONFIG_SYS_BR1_PRELIM           0xf0000801      /* port size 16bit */
 205 #define CONFIG_SYS_OR1_PRELIM           0xffff6e65      /* 64K EEPROM area */
 206
 207 /* EPLD - User switches, board id, LEDs */
 208 #define CONFIG_SYS_BR2_PRELIM           0xf1000801      /* port size 16bit */
 209 #define CONFIG_SYS_OR2_PRELIM           0xfff06e65      /* EPLD (switches, board ID, LEDs) area */
 210
 211 /* Local bus SDRAM 128MB */
 212 #define CONFIG_SYS_BR3_PRELIM           0xe0001861      /* port size ?bit */
 213 #define CONFIG_SYS_OR3_PRELIM           0xfc006cc0      /* 128MB local bus SDRAM area (1st half) */
 214 #define CONFIG_SYS_BR4_PRELIM           0xe4001861      /* port size ?bit */
 215 #define CONFIG_SYS_OR4_PRELIM           0xfc006cc0      /* 128MB local bus SDRAM area (2nd half) */
 216
 217 /* Disk on Chip (DOC) 128MB */
 218 #define CONFIG_SYS_BR5_PRELIM           0xe8001001      /* port size ?bit */
 219 #define CONFIG_SYS_OR5_PRELIM           0xf8006e65      /* 128MB local bus SDRAM area (2nd half) */
 220
 221 /* LCD */
 222 #define CONFIG_SYS_BR6_PRELIM           0xf4000801      /* port size ?bit */
 223 #define CONFIG_SYS_OR6_PRELIM           0xfff06e65      /* 128MB local bus SDRAM area (2nd half) */
 224
 225 /* Control logic & misc peripherals */
 226 #define CONFIG_SYS_BR7_PRELIM           0xf2000801      /* port size ?bit */
 227 #define CONFIG_SYS_OR7_PRELIM           0xfff06e65      /* 128MB local bus SDRAM area (2nd half) */
 228
 229 #define CONFIG_SYS_MAX_FLASH_BANKS      1               /* number of banks */
 230 #define CONFIG_SYS_MAX_FLASH_SECT       131             /* sectors per device */
 231
 232 #undef  CONFIG_SYS_FLASH_CHECKSUM
 233 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 234 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 235 #define CONFIG_SYS_MONITOR_BASE TEXT_BASE       /* start of monitor */
 236 #define CONFIG_SYS_MONITOR_BASE_EARLY   0xfff00000      /* early monitor loc */
 237
 238 #define CONFIG_FLASH_CFI_DRIVER
 239 #define CONFIG_SYS_FLASH_CFI
 240 #define CONFIG_SYS_WRITE_SWAPPED_DATA
 241 #define CONFIG_SYS_FLASH_EMPTY_INFO
 242 #define CONFIG_SYS_FLASH_PROTECTION
 243
 244 #undef CONFIG_CLOCKS_IN_MHZ
 245
 246 #define CONFIG_SYS_INIT_RAM_LOCK        1
 247 #ifndef CONFIG_SYS_INIT_RAM_LOCK
 248 #define CONFIG_SYS_INIT_RAM_ADDR        0x0fd00000      /* Initial RAM address */
 249 #else
 250 #define CONFIG_SYS_INIT_RAM_ADDR        0xf8400000      /* Initial RAM address */
 251 #endif
 252 #define CONFIG_SYS_INIT_RAM_END 0x4000          /* End of used area in RAM */
 253
 254 #define CONFIG_SYS_GBL_DATA_SIZE        128             /* num bytes initial data */
 255 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
 256 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 257
 258 #define CONFIG_SYS_MONITOR_LEN          (256 * 1024)    /* Reserve 256 kB for Mon */
 259 #define CONFIG_SYS_MALLOC_LEN           (128 * 1024)    /* Reserved for malloc */
 260
 261 /* Serial Port */
 262 #define CONFIG_CONS_INDEX     1
 263 #undef  CONFIG_SERIAL_SOFTWARE_FIFO
 264 #define CONFIG_SYS_NS16550
 265 #define CONFIG_SYS_NS16550_SERIAL
 266 #define CONFIG_SYS_NS16550_REG_SIZE    1
 267 #define CONFIG_SYS_NS16550_CLK          get_bus_freq(0)
 268
 269 #define CONFIG_SYS_BAUDRATE_TABLE  \
 270         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
 271
 272 #define CONFIG_SYS_NS16550_COM1        (CONFIG_SYS_CCSRBAR+0x4500)
 273 #define CONFIG_SYS_NS16550_COM2        (CONFIG_SYS_CCSRBAR+0x4600)
 274
 275 /* Use the HUSH parser */
 276 #define CONFIG_SYS_HUSH_PARSER
 277 #ifdef  CONFIG_SYS_HUSH_PARSER
 278 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
 279 #endif
 280
 281 /*
 282  * Pass open firmware flat tree to kernel
 283  */
 284 #define CONFIG_OF_LIBFDT                1
 285 #define CONFIG_OF_BOARD_SETUP           1
 286 #define CONFIG_OF_STDOUT_VIA_ALIAS      1
 287
 288 #define CONFIG_SYS_64BIT_VSPRINTF       1
 289 #define CONFIG_SYS_64BIT_STRTOUL        1
 290
 291 /*
 292  * I2C
 293  */
 294 #define CONFIG_FSL_I2C          /* Use FSL common I2C driver */
 295 #define CONFIG_HARD_I2C         /* I2C with hardware support*/
 296 #undef  CONFIG_SOFT_I2C                 /* I2C bit-banged */
 297 #define CONFIG_SYS_I2C_SPEED            400000  /* I2C speed and slave address */
 298 #define CONFIG_SYS_I2C_SLAVE            0x7F
 299 #define CONFIG_SYS_I2C_NOPROBES        {0x69}   /* Don't probe these addrs */
 300 #define CONFIG_SYS_I2C_OFFSET           0x3100
 301
 302 /*
 303  * RapidIO MMU
 304  */
 305 #define CONFIG_SYS_RIO_MEM_BASE 0xc0000000      /* base address */
 306 #define CONFIG_SYS_RIO_MEM_PHYS CONFIG_SYS_RIO_MEM_BASE
 307 #define CONFIG_SYS_RIO_MEM_SIZE 0x20000000      /* 128M */
 308
 309 /*
 310  * General PCI
 311  * Addresses are mapped 1-1.
 312  */
 313 #define CONFIG_SYS_PCI1_MEM_BUS         0x80000000
 314 #define CONFIG_SYS_PCI1_MEM_PHYS        CONFIG_SYS_PCI1_MEM_BUS
 315 #define CONFIG_SYS_PCI1_MEM_VIRT        CONFIG_SYS_PCI1_MEM_BUS
 316 #define CONFIG_SYS_PCI1_MEM_SIZE        0x20000000      /* 512M */
 317 #define CONFIG_SYS_PCI1_IO_BUS  0xe2000000
 318 #define CONFIG_SYS_PCI1_IO_PHYS CONFIG_SYS_PCI1_IO_BUS
 319 #define CONFIG_SYS_PCI1_IO_VIRT CONFIG_SYS_PCI1_IO_BUS
 320 #define CONFIG_SYS_PCI1_IO_SIZE 0x1000000       /* 16M */
 321
 322 #define CONFIG_SYS_PCI2_MEM_BUS 0xa0000000
 323 #define CONFIG_SYS_PCI2_MEM_PHYS        CONFIG_SYS_PCI2_MEM_BUS
 324 #define CONFIG_SYS_PCI2_MEM_VIRT        CONFIG_SYS_PCI2_MEM_BUS
 325 #define CONFIG_SYS_PCI2_MEM_SIZE        0x10000000      /* 256M */
 326 #define CONFIG_SYS_PCI2_IO_BUS  0xe3000000
 327 #define CONFIG_SYS_PCI2_IO_PHYS CONFIG_SYS_PCI2_IO_BUS
 328 #define CONFIG_SYS_PCI2_IO_VIRT CONFIG_SYS_PCI2_IO_BUS
 329 #define CONFIG_SYS_PCI2_IO_SIZE 0x1000000       /* 16M */
 330
 331 #if defined(CONFIG_PCI)
 332
 333 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 334
 335 #undef CONFIG_SYS_SCSI_SCAN_BUS_REVERSE
 336
 337 #define CONFIG_NET_MULTI
 338 #define CONFIG_PCI_PNP                  /* do pci plug-and-play */
 339
 340 #undef CONFIG_EEPRO100
 341 #undef CONFIG_TULIP
 342
 343 #if !defined(CONFIG_PCI_PNP)
 344     #define PCI_ENET0_IOADDR    0xe0000000
 345     #define PCI_ENET0_MEMADDR   0xe0000000
 346     #define PCI_IDSEL_NUMBER    0x0c    /* slot0->3(IDSEL)=12->15 */
 347 #endif
 348
 349 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 350
 351 #define CONFIG_DOS_PARTITION
 352 #undef CONFIG_SCSI_AHCI
 353
 354 #ifdef CONFIG_SCSI_AHCI
 355 #define CONFIG_SATA_ULI5288
 356 #define CONFIG_SYS_SCSI_MAX_SCSI_ID     4
 357 #define CONFIG_SYS_SCSI_MAX_LUN 1
 358 #define CONFIG_SYS_SCSI_MAX_DEVICE      (CONFIG_SYS_SCSI_MAX_SCSI_ID * CONFIG_SYS_SCSI_MAX_LUN)
 359 #define CONFIG_SYS_SCSI_MAXDEVICE       CONFIG_SYS_SCSI_MAX_DEVICE
 360 #endif
 361
 362 #endif  /* CONFIG_PCI */
 363
 364 #if defined(CONFIG_TSEC_ENET)
 365
 366 #ifndef CONFIG_NET_MULTI
 367 #define CONFIG_NET_MULTI        1
 368 #endif
 369
 370 /* #define CONFIG_MII           1 */    /* MII PHY management */
 371
 372 #define CONFIG_TSEC1    1
 373 #define CONFIG_TSEC1_NAME       "eTSEC1"
 374 #define CONFIG_TSEC2    1
 375 #define CONFIG_TSEC2_NAME       "eTSEC2"
 376 #define CONFIG_TSEC3    1
 377 #define CONFIG_TSEC3_NAME       "eTSEC3"
 378 #define CONFIG_TSEC4    1
 379 #define CONFIG_TSEC4_NAME       "eTSEC4"
 380
 381 #define TSEC1_PHY_ADDR          0x1F
 382 #define TSEC2_PHY_ADDR          0x00
 383 #define TSEC3_PHY_ADDR          0x01
 384 #define TSEC4_PHY_ADDR          0x02
 385 #define TSEC1_PHYIDX            0
 386 #define TSEC2_PHYIDX            0
 387 #define TSEC3_PHYIDX            0
 388 #define TSEC4_PHYIDX            0
 389 #define TSEC1_FLAGS             TSEC_GIGABIT
 390 #define TSEC2_FLAGS             TSEC_GIGABIT
 391 #define TSEC3_FLAGS             TSEC_GIGABIT
 392 #define TSEC4_FLAGS             TSEC_GIGABIT
 393
 394 #define CONFIG_SYS_TBIPA_VALUE  0x1e    /* Set TBI address not to conflict with TSEC1_PHY_ADDR */
 395
 396 #define CONFIG_ETHPRIME         "eTSEC1"
 397
 398 #endif  /* CONFIG_TSEC_ENET */
 399
 400 /*
 401  * BAT0         2G     Cacheable, non-guarded
 402  * 0x0000_0000  2G     DDR
 403  */
 404 #define CONFIG_SYS_DBAT0L       (BATL_PP_RW | BATL_MEMCOHERENCE)
 405 #define CONFIG_SYS_DBAT0U       (BATU_BL_2G | BATU_VS | BATU_VP)
 406 #define CONFIG_SYS_IBAT0L       (BATL_PP_RW | BATL_MEMCOHERENCE )
 407 #define CONFIG_SYS_IBAT0U       CONFIG_SYS_DBAT0U
 408
 409 /*
 410  * BAT1         1G     Cache-inhibited, guarded
 411  * 0x8000_0000  512M   PCI-Express 1 Memory
 412  * 0xa000_0000  512M   PCI-Express 2 Memory
 413  *      Changed it for operating from 0xd0000000
 414  */
 415 #define CONFIG_SYS_DBAT1L       ( CONFIG_SYS_PCI1_MEM_PHYS | BATL_PP_RW \
 416                         | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
 417 #define CONFIG_SYS_DBAT1U       (CONFIG_SYS_PCI1_MEM_VIRT | BATU_BL_256M | BATU_VS | BATU_VP)
 418 #define CONFIG_SYS_IBAT1L       (CONFIG_SYS_PCI1_MEM_PHYS | BATL_PP_RW | BATL_CACHEINHIBIT)
 419 #define CONFIG_SYS_IBAT1U       CONFIG_SYS_DBAT1U
 420
 421 /*
 422  * BAT2         512M   Cache-inhibited, guarded
 423  * 0xc000_0000  512M   RapidIO Memory
 424  */
 425 #define CONFIG_SYS_DBAT2L       (CONFIG_SYS_RIO_MEM_BASE | BATL_PP_RW \
 426                         | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
 427 #define CONFIG_SYS_DBAT2U       (CONFIG_SYS_RIO_MEM_BASE | BATU_BL_512M | BATU_VS | BATU_VP)
 428 #define CONFIG_SYS_IBAT2L       (CONFIG_SYS_RIO_MEM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)
 429 #define CONFIG_SYS_IBAT2U       CONFIG_SYS_DBAT2U
 430
 431 /*
 432  * BAT3         4M     Cache-inhibited, guarded
 433  * 0xf800_0000  4M     CCSR
 434  */
 435 #define CONFIG_SYS_DBAT3L       ( CONFIG_SYS_CCSRBAR | BATL_PP_RW \
 436                         | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
 437 #define CONFIG_SYS_DBAT3U       (CONFIG_SYS_CCSRBAR | BATU_BL_4M | BATU_VS | BATU_VP)
 438 #define CONFIG_SYS_IBAT3L       (CONFIG_SYS_CCSRBAR | BATL_PP_RW | BATL_CACHEINHIBIT)
 439 #define CONFIG_SYS_IBAT3U       CONFIG_SYS_DBAT3U
 440
 441 #if (CONFIG_SYS_CCSRBAR_DEFAULT != CONFIG_SYS_CCSRBAR)
 442 #define CONFIG_SYS_CCSR_DEFAULT_DBATL (CONFIG_SYS_CCSRBAR_DEFAULT \
 443                                        | BATL_PP_RW | BATL_CACHEINHIBIT \
 444                                        | BATL_GUARDEDSTORAGE)
 445 #define CONFIG_SYS_CCSR_DEFAULT_DBATU (CONFIG_SYS_CCSRBAR_DEFAULT \
 446                                        | BATU_BL_1M | BATU_VS | BATU_VP)
 447 #define CONFIG_SYS_CCSR_DEFAULT_IBATL (CONFIG_SYS_CCSRBAR_DEFAULT \
 448                                        | BATL_PP_RW | BATL_CACHEINHIBIT)
 449 #define CONFIG_SYS_CCSR_DEFAULT_IBATU CONFIG_SYS_CCSR_DEFAULT_DBATU
 450 #endif
 451
 452 /*
 453  * BAT4         32M    Cache-inhibited, guarded
 454  * 0xe200_0000  16M    PCI-Express 1 I/O
 455  * 0xe300_0000  16M    PCI-Express 2 I/0
 456  *    Note that this is at 0xe0000000
 457  */
 458 #define CONFIG_SYS_DBAT4L       ( CONFIG_SYS_PCI1_IO_PHYS | BATL_PP_RW \
 459                         | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
 460 #define CONFIG_SYS_DBAT4U       (CONFIG_SYS_PCI1_IO_VIRT | BATU_BL_32M | BATU_VS | BATU_VP)
 461 #define CONFIG_SYS_IBAT4L       (CONFIG_SYS_PCI1_IO_PHYS | BATL_PP_RW | BATL_CACHEINHIBIT)
 462 #define CONFIG_SYS_IBAT4U       CONFIG_SYS_DBAT4U
 463
 464 /*
 465  * BAT5         128K   Cacheable, non-guarded
 466  * 0xe401_0000  128K   Init RAM for stack in the CPU DCache (no backing memory)
 467  */
 468 #define CONFIG_SYS_DBAT5L       (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_RW | BATL_MEMCOHERENCE)
 469 #define CONFIG_SYS_DBAT5U       (CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
 470 #define CONFIG_SYS_IBAT5L       CONFIG_SYS_DBAT5L
 471 #define CONFIG_SYS_IBAT5U       CONFIG_SYS_DBAT5U
 472
 473 /*
 474  * BAT6         32M    Cache-inhibited, guarded
 475  * 0xfe00_0000  32M    FLASH
 476  */
 477 #define CONFIG_SYS_DBAT6L       ((CONFIG_SYS_FLASH_BASE & 0xfe000000) | BATL_PP_RW \
 478                         | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
 479 #define CONFIG_SYS_DBAT6U       ((CONFIG_SYS_FLASH_BASE & 0xfe000000) | BATU_BL_32M | BATU_VS | BATU_VP)
 480 #define CONFIG_SYS_IBAT6L       ((CONFIG_SYS_FLASH_BASE & 0xfe000000) | BATL_PP_RW | BATL_MEMCOHERENCE)
 481 #define CONFIG_SYS_IBAT6U       CONFIG_SYS_DBAT6U
 482
 483 /* Map the last 1M of flash where we're running from reset */
 484 #define CONFIG_SYS_DBAT6L_EARLY (CONFIG_SYS_MONITOR_BASE_EARLY | BATL_PP_RW \
 485                                  | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
 486 #define CONFIG_SYS_DBAT6U_EARLY (TEXT_BASE | BATU_BL_1M | BATU_VS | BATU_VP)
 487 #define CONFIG_SYS_IBAT6L_EARLY (CONFIG_SYS_MONITOR_BASE_EARLY | BATL_PP_RW \
 488                                  | BATL_MEMCOHERENCE)
 489 #define CONFIG_SYS_IBAT6U_EARLY CONFIG_SYS_DBAT6U_EARLY
 490
 491 #define CONFIG_SYS_DBAT7L       0x00000000
 492 #define CONFIG_SYS_DBAT7U       0x00000000
 493 #define CONFIG_SYS_IBAT7L       0x00000000
 494 #define CONFIG_SYS_IBAT7U       0x00000000
 495
 496 /*
 497  * Environment
 498  */
 499 #define CONFIG_ENV_IS_IN_FLASH  1
 500 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE + 0x40000)
 501 #define CONFIG_ENV_SECT_SIZE    0x40000 /* 256K(one sector) for env */
 502 #define CONFIG_ENV_SIZE         0x2000
 503
 504 #define CONFIG_LOADS_ECHO       1       /* echo on for serial download */
 505 #define CONFIG_SYS_LOADS_BAUD_CHANGE    1       /* allow baudrate change */
 506
 507 #include <config_cmd_default.h>
 508     #define CONFIG_CMD_PING
 509     #define CONFIG_CMD_I2C
 510     #define CONFIG_CMD_REGINFO
 511
 512 #if defined(CONFIG_PCI)
 513     #define CONFIG_CMD_PCI
 514 #endif
 515
 516 #undef CONFIG_WATCHDOG                  /* watchdog disabled */
 517
 518 /*
 519  * Miscellaneous configurable options
 520  */
 521 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 522 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 523 #define CONFIG_SYS_PROMPT       "=> "           /* Monitor Command Prompt */
 524
 525 #if defined(CONFIG_CMD_KGDB)
 526     #define CONFIG_SYS_CBSIZE   1024            /* Console I/O Buffer Size */
 527 #else
 528     #define CONFIG_SYS_CBSIZE   256             /* Console I/O Buffer Size */
 529 #endif
 530
 531 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
 532 #define CONFIG_SYS_MAXARGS      16              /* max number of command args */
 533 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE       /* Boot Argument Buffer Size */
 534 #define CONFIG_SYS_HZ           1000            /* decrementer freq: 1ms ticks */
 535
 536 /*
 537  * For booting Linux, the board info and command line data
 538  * have to be in the first 8 MB of memory, since this is
 539  * the maximum mapped by the Linux kernel during initialization.
 540  */
 541 #define CONFIG_SYS_BOOTMAPSZ    (8 << 20)       /* Initial Memory map for Linux*/
 542
 543 /* Cache Configuration */
 544 #define CONFIG_SYS_DCACHE_SIZE          32768
 545 #define CONFIG_SYS_CACHELINE_SIZE       32
 546 #if defined(CONFIG_CMD_KGDB)
 547 #define CONFIG_SYS_CACHELINE_SHIFT      5       /*log base 2 of the above value*/
 548 #endif
 549
 550 /*
 551  * Internal Definitions
 552  *
 553  * Boot Flags
 554  */
 555 #define BOOTFLAG_COLD   0x01            /* Normal Power-On: Boot from FLASH */
 556 #define BOOTFLAG_WARM   0x02            /* Software reboot */
 557
 558 #if defined(CONFIG_CMD_KGDB)
 559 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 560 #define CONFIG_KGDB_SER_INDEX   2       /* which serial port to use */
 561 #endif
 562
 563 /*
 564  * Environment Configuration
 565  */
 566
 567 /* The mac addresses for all ethernet interface */
 568 #if defined(CONFIG_TSEC_ENET)
 569 #define CONFIG_ETHADDR   02:E0:0C:00:00:01
 570 #define CONFIG_ETH1ADDR  02:E0:0C:00:01:FD
 571 #define CONFIG_ETH2ADDR  02:E0:0C:00:02:FD
 572 #define CONFIG_ETH3ADDR  02:E0:0C:00:03:FD
 573 #endif
 574
 575 #define CONFIG_HAS_ETH0         1
 576 #define CONFIG_HAS_ETH1         1
 577 #define CONFIG_HAS_ETH2         1
 578 #define CONFIG_HAS_ETH3         1
 579
 580 #define CONFIG_IPADDR           192.168.0.50
 581
 582 #define CONFIG_HOSTNAME         sbc8641d
 583 #define CONFIG_ROOTPATH         /opt/eldk/ppc_74xx
 584 #define CONFIG_BOOTFILE         uImage
 585
 586 #define CONFIG_SERVERIP         192.168.0.2
 587 #define CONFIG_GATEWAYIP        192.168.0.1
 588 #define CONFIG_NETMASK          255.255.255.0
 589
 590 /* default location for tftp and bootm */
 591 #define CONFIG_LOADADDR         1000000
 592
 593 #define CONFIG_BOOTDELAY 10     /* -1 disables auto-boot */
 594 #undef  CONFIG_BOOTARGS         /* the boot command will set bootargs */
 595
 596 #define CONFIG_BAUDRATE 115200
 597
 598 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
 599    "netdev=eth0\0"                                                      \
 600    "consoledev=ttyS0\0"                                                 \
 601    "ramdiskaddr=2000000\0"                                              \
 602    "ramdiskfile=uRamdisk\0"                                             \
 603    "dtbaddr=400000\0"                                                   \
 604    "dtbfile=sbc8641d.dtb\0"                                             \
 605    "en-wd=mw.b f8100010 0x08; echo -expect:- 08; md.b f8100010 1\0"     \
 606    "dis-wd=mw.b f8100010 0x00; echo -expect:- 00; md.b f8100010 1\0"    \
 607    "maxcpus=1"
 608
 609 #define CONFIG_NFSBOOTCOMMAND                                           \
 610    "setenv bootargs root=/dev/nfs rw "                                  \
 611       "nfsroot=$serverip:$rootpath "                                    \
 612       "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 613       "console=$consoledev,$baudrate $othbootargs;"                     \
 614    "tftp $loadaddr $bootfile;"                                          \
 615    "tftp $dtbaddr $dtbfile;"                                            \
 616    "bootm $loadaddr - $dtbaddr"
 617
 618 #define CONFIG_RAMBOOTCOMMAND                                           \
 619    "setenv bootargs root=/dev/ram rw "                                  \
 620       "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 621       "console=$consoledev,$baudrate $othbootargs;"                     \
 622    "tftp $ramdiskaddr $ramdiskfile;"                                    \
 623    "tftp $loadaddr $bootfile;"                                          \
 624    "tftp $dtbaddr $dtbfile;"                                            \
 625    "bootm $loadaddr $ramdiskaddr $dtbaddr"
 626
 627 #define CONFIG_FLASHBOOTCOMMAND                                         \
 628    "setenv bootargs root=/dev/ram rw "                                  \
 629       "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 630       "console=$consoledev,$baudrate $othbootargs;"                     \
 631    "bootm ffd00000 ffb00000 ffa00000"
 632
 633 #define CONFIG_BOOTCOMMAND  CONFIG_FLASHBOOTCOMMAND
 634
 635 #endif  /* __CONFIG_H */