]> git.ipfire.org Git - people/ms/u-boot.git/blob - include/configs/secomx6quq7.h
Move PHY_MICREL and PHY_MICREL_KSZ90X1 to Kconfig
[people/ms/u-boot.git] / include / configs / secomx6quq7.h
1 /*
2 * Copyright (C) 2013 Seco S.r.l
3 *
4 * Configuration settings for the Seco Boards.
5 *
6 * SPDX-License-Identifier: GPL-2.0+
7 */
8
9 #ifndef __CONFIG_H
10 #define __CONFIG_H
11
12 #include "mx6_common.h"
13
14 #define CONFIG_BOARD_REVISION_TAG
15
16 /* Size of malloc() pool */
17 #define CONFIG_SYS_MALLOC_LEN (10 * SZ_1M)
18
19 #define CONFIG_MXC_UART
20 #define CONFIG_MXC_UART_BASE UART2_BASE
21
22 #define CONFIG_SYS_MEMTEST_START 0x10000000
23 #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 500 * SZ_1M)
24
25 /* MMC Configuration */
26 #define CONFIG_SYS_FSL_USDHC_NUM 2
27 #define CONFIG_SYS_FSL_ESDHC_ADDR 0
28
29 /* Ethernet Configuration */
30 #define CONFIG_FEC_MXC
31 #define CONFIG_MII
32 #define IMX_FEC_BASE ENET_BASE_ADDR
33 #define CONFIG_FEC_XCV_TYPE RGMII
34 #define CONFIG_ETHPRIME "FEC"
35 #define CONFIG_FEC_MXC_PHYADDR 6
36
37 #define CONFIG_EXTRA_ENV_SETTINGS \
38 "netdev=eth0\0" \
39 "ethprime=FEC0\0" \
40 "netdev=eth0\0" \
41 "ethprime=FEC0\0" \
42 "uboot=u-boot.bin\0" \
43 "kernel=uImage\0" \
44 "nfsroot=/opt/eldk/arm\0" \
45 "ip_local=10.0.0.5::10.0.0.1:255.255.255.0::eth0:off\0" \
46 "ip_server=10.0.0.1\0" \
47 "nfs_path=/targetfs \0" \
48 "memory=mem=1024M\0" \
49 "bootdev=mmc dev 0; ext2load mmc 0:1\0" \
50 "root=root=/dev/mmcblk0p1\0" \
51 "option=rootwait rw fixrtc rootflags=barrier=1\0" \
52 "cpu_freq=arm_freq=996\0" \
53 "setbootargs=setenv bootargs console=ttymxc1,115200 ${root}" \
54 " ${option} ${memory} ${cpu_freq}\0" \
55 "setbootargs_nfs=setenv bootargs console=ttymxc1,115200" \
56 " root=/dev/nfs nfsroot=${ip_server}:${nfs_path}" \
57 " nolock,wsize=4096,rsize=4096 ip=:::::eth0:dhcp" \
58 " ${memory} ${cpu_freq}\0" \
59 "setbootdev=setenv boot_dev ${bootdev} 10800000 /boot/uImage\0" \
60 "bootcmd=run setbootargs; run setbootdev; run boot_dev;" \
61 " bootm 0x10800000\0" \
62 "stdin=serial\0" \
63 "stdout=serial\0" \
64 "stderr=serial\0"
65
66 /* Print Buffer Size */
67 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
68 sizeof(CONFIG_SYS_PROMPT) + 16)
69
70 #define CONFIG_SYS_HZ 1000
71
72 /* Physical Memory Map */
73 #define CONFIG_NR_DRAM_BANKS 1
74 #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
75 #define PHYS_SDRAM_SIZE (2u * 1024 * 1024 * 1024)
76
77 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
78 #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
79 #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
80
81 #define CONFIG_SYS_INIT_SP_OFFSET \
82 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
83 #define CONFIG_SYS_INIT_SP_ADDR \
84 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
85
86 /* Environment organization */
87 #define CONFIG_ENV_SIZE (8 * 1024)
88
89 #if defined(CONFIG_ENV_IS_IN_MMC)
90 #define CONFIG_ENV_OFFSET (6 * 128 * 1024)
91 #define CONFIG_SYS_MMC_ENV_DEV 0
92 #define CONFIG_DYNAMIC_MMC_DEVNO
93 #endif
94
95 #endif /* __CONFIG_H */