include/configs/sheevaplug.h

   1 /*
   2  * (C) Copyright 2009-2014
   3  * Gerald Kerma <dreagle@doukki.net>
   4  * Marvell Semiconductor <www.marvell.com>
   5  * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
   6  *
   7  * SPDX-License-Identifier:     GPL-2.0+
   8  */
   9
  10 #ifndef _CONFIG_SHEEVAPLUG_H
  11 #define _CONFIG_SHEEVAPLUG_H
  12
  13 /*
  14  * High Level Configuration Options (easy to change)
  15  */
  16 #define CONFIG_FEROCEON_88FR131 1       /* CPU Core subversion */
  17 #define CONFIG_MACH_SHEEVAPLUG  /* Machine type */
  18
  19 /*
  20  * Commands configuration
  21  */
  22
  23 /*
  24  * Standard filesystems
  25  */
  26 #define CONFIG_SYS_MVFS
  27
  28 /*
  29  * mv-plug-common.h should be defined after CMD configs since it used them
  30  * to enable certain macros
  31  */
  32 #include "mv-plug-common.h"
  33
  34 /*
  35  *  Environment variables configurations
  36  */
  37 #ifdef CONFIG_CMD_NAND
  38 #define CONFIG_ENV_SECT_SIZE            0x20000 /* 128K */
  39 #endif
  40 /*
  41  * max 4k env size is enough, but in case of nand
  42  * it has to be rounded to sector size
  43  */
  44 #define CONFIG_ENV_SIZE                 0x20000 /* 128k */
  45 #define CONFIG_ENV_ADDR                 0x80000
  46 #define CONFIG_ENV_OFFSET               0x80000 /* env starts here */
  47
  48 /*
  49  * Default environment variables
  50  */
  51 #define CONFIG_BOOTCOMMAND              "${x_bootcmd_kernel}; " \
  52         "setenv bootargs ${x_bootargs} ${x_bootargs_root}; "    \
  53         "bootm 0x6400000;"
  54
  55 #define CONFIG_EXTRA_ENV_SETTINGS       "x_bootargs=console"    \
  56         "=ttyS0,115200 mtdparts="CONFIG_MTDPARTS_DEFAULT        \
  57         "x_bootcmd_kernel=nand read 0x6400000 0x100000 0x400000\0" \
  58         "x_bootcmd_usb=usb start\0" \
  59         "x_bootargs_root=root=/dev/mtdblock3 rw rootfstype=jffs2\0"
  60
  61 /*
  62  * Ethernet Driver configuration
  63  */
  64 #ifdef CONFIG_CMD_NET
  65 #define CONFIG_MVGBE_PORTS      {1, 0}  /* enable port 0 only */
  66 #define CONFIG_PHY_BASE_ADR     0
  67 #endif /* CONFIG_CMD_NET */
  68
  69 /*
  70  * SDIO/MMC Card Configuration
  71  */
  72 #ifdef CONFIG_CMD_MMC
  73 #define CONFIG_MVEBU_MMC
  74 #define CONFIG_SYS_MMC_BASE KW_SDIO_BASE
  75 #endif /* CONFIG_CMD_MMC */
  76
  77 /*
  78  * SATA driver configuration
  79  */
  80 #ifdef CONFIG_IDE
  81 #define __io
  82 #define CONFIG_IDE_PREINIT
  83 #define CONFIG_MVSATA_IDE_USE_PORT0
  84 #define CONFIG_MVSATA_IDE_USE_PORT1
  85 #define CONFIG_SYS_ATA_IDE0_OFFSET      MV_SATA_PORT0_OFFSET
  86 #define CONFIG_SYS_ATA_IDE1_OFFSET      MV_SATA_PORT1_OFFSET
  87 #endif /* CONFIG_IDE */
  88
  89 #endif /* _CONFIG_SHEEVAPLUG_H */