include/configs/smdkc100.h

   1 /*
   2  * (C) Copyright 2009 Samsung Electronics
   3  * Minkyu Kang <mk7.kang@samsung.com>
   4  * HeungJun Kim <riverful.kim@samsung.com>
   5  * Inki Dae <inki.dae@samsung.com>
   6  *
   7  * Configuation settings for the SAMSUNG SMDKC100 board.
   8  *
   9  * SPDX-License-Identifier:     GPL-2.0+
  10  */
  11
  12 #ifndef __CONFIG_H
  13 #define __CONFIG_H
  14
  15 /*
  16  * High Level Configuration Options
  17  * (easy to change)
  18  */
  19 #define CONFIG_SAMSUNG          1       /* in a SAMSUNG core */
  20 #define CONFIG_S5P              1       /* which is in a S5P Family */
  21 #define CONFIG_S5PC100          1       /* which is in a S5PC100 */
  22 #define CONFIG_SMDKC100         1       /* working with SMDKC100 */
  23
  24 #include <asm/arch/cpu.h>               /* get chip and board defs */
  25
  26 #define CONFIG_ARCH_CPU_INIT
  27
  28 #define CONFIG_DISPLAY_CPUINFO
  29 #define CONFIG_DISPLAY_BOARDINFO
  30
  31 /* input clock of PLL: SMDKC100 has 12MHz input clock */
  32 #define CONFIG_SYS_CLK_FREQ             12000000
  33
  34 /* DRAM Base */
  35 #define CONFIG_SYS_SDRAM_BASE           0x30000000
  36
  37 /* Text Base */
  38 #define CONFIG_SYS_TEXT_BASE            0x34800000
  39
  40 #define CONFIG_SETUP_MEMORY_TAGS
  41 #define CONFIG_CMDLINE_TAG
  42 #define CONFIG_INITRD_TAG
  43 #define CONFIG_CMDLINE_EDITING
  44
  45 /*
  46  * Size of malloc() pool
  47  * 1MB = 0x100000, 0x100000 = 1024 * 1024
  48  */
  49 #define CONFIG_SYS_MALLOC_LEN           (CONFIG_ENV_SIZE + (1 << 20))
  50
  51 /* Small malloc pool before relocation */
  52 #define CONFIG_SYS_MALLOC_F_LEN         (1 << 10)
  53
  54 /*
  55  * select serial console configuration
  56  */
  57 #define CONFIG_SERIAL0                  1       /* use SERIAL 0 on SMDKC100 */
  58
  59 /* PWM */
  60 #define CONFIG_PWM                      1
  61
  62 /* allow to overwrite serial and ethaddr */
  63 #define CONFIG_ENV_OVERWRITE
  64 #define CONFIG_BAUDRATE                 115200
  65
  66 /***********************************************************
  67  * Command definition
  68  ***********************************************************/
  69 #include <config_cmd_default.h>
  70
  71 #undef CONFIG_CMD_FLASH
  72 #undef CONFIG_CMD_IMLS
  73 #undef CONFIG_CMD_NAND
  74
  75 #define CONFIG_CMD_CACHE
  76 #define CONFIG_CMD_REGINFO
  77 #define CONFIG_CMD_ONENAND
  78 #define CONFIG_CMD_ELF
  79 #define CONFIG_CMD_FAT
  80 #define CONFIG_CMD_MTDPARTS
  81
  82 #define CONFIG_BOOTDELAY        3
  83
  84 #define CONFIG_ZERO_BOOTDELAY_CHECK
  85
  86 #define CONFIG_MTD_DEVICE
  87 #define CONFIG_MTD_PARTITIONS
  88
  89 #define MTDIDS_DEFAULT          "onenand0=s3c-onenand"
  90 #define MTDPARTS_DEFAULT        "mtdparts=s3c-onenand:256k(bootloader)"\
  91                                 ",128k@0x40000(params)"\
  92                                 ",3m@0x60000(kernel)"\
  93                                 ",16m@0x360000(test)"\
  94                                 ",-(UBI)"
  95
  96 #define NORMAL_MTDPARTS_DEFAULT MTDPARTS_DEFAULT
  97
  98 #define CONFIG_BOOTCOMMAND      "run ubifsboot"
  99
 100 #define CONFIG_RAMDISK_BOOT     "root=/dev/ram0 rw rootfstype=ext2" \
 101                                 " console=ttySAC0,115200n8" \
 102                                 " mem=128M"
 103
 104 #define CONFIG_COMMON_BOOT      "console=ttySAC0,115200n8" \
 105                                 " mem=128M " \
 106                                 " " MTDPARTS_DEFAULT
 107
 108 #define CONFIG_BOOTARGS "root=/dev/mtdblock5 ubi.mtd=4" \
 109                         " rootfstype=cramfs " CONFIG_COMMON_BOOT
 110
 111 #define CONFIG_UPDATEB  "updateb=onenand erase 0x0 0x40000;" \
 112                         " onenand write 0x32008000 0x0 0x40000\0"
 113
 114 #define CONFIG_ENV_OVERWRITE
 115 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
 116         CONFIG_UPDATEB \
 117         "updatek=" \
 118                 "onenand erase 0x60000 0x300000;" \
 119                 "onenand write 0x31008000 0x60000 0x300000\0" \
 120         "updateu=" \
 121                 "onenand erase block 147-4095;" \
 122                 "onenand write 0x32000000 0x1260000 0x8C0000\0" \
 123         "bootk=" \
 124                 "onenand read 0x30007FC0 0x60000 0x300000;" \
 125                 "bootm 0x30007FC0\0" \
 126         "flashboot=" \
 127                 "set bootargs root=/dev/mtdblock${bootblock} " \
 128                 "rootfstype=${rootfstype} " \
 129                 "ubi.mtd=${ubiblock} ${opts} " CONFIG_COMMON_BOOT ";" \
 130                 "run bootk\0" \
 131         "ubifsboot=" \
 132                 "set bootargs root=ubi0!rootfs rootfstype=ubifs " \
 133                 " ubi.mtd=${ubiblock} ${opts} " CONFIG_COMMON_BOOT "; " \
 134                 "run bootk\0" \
 135         "boottrace=setenv opts initcall_debug; run bootcmd\0" \
 136         "android=" \
 137                 "set bootargs root=ubi0!ramdisk ubi.mtd=${ubiblock} " \
 138                 "rootfstype=ubifs init=/init.sh " CONFIG_COMMON_BOOT "; " \
 139                 "run bootk\0" \
 140         "nfsboot=" \
 141                 "set bootargs root=/dev/nfs ubi.mtd=${ubiblock} " \
 142                 "nfsroot=${nfsroot},nolock " \
 143                 "ip=${ipaddr}:${serverip}:${gatewayip}:" \
 144                 "${netmask}:nowplus:usb0:off " CONFIG_COMMON_BOOT "; " \
 145                 "run bootk\0" \
 146         "ramboot=" \
 147                 "set bootargs " CONFIG_RAMDISK_BOOT \
 148                 " initrd=0x33000000,8M ramdisk=8192\0" \
 149         "rootfstype=cramfs\0" \
 150         "mtdparts=" MTDPARTS_DEFAULT "\0" \
 151         "meminfo=mem=128M\0" \
 152         "nfsroot=/nfsroot/arm\0" \
 153         "bootblock=5\0" \
 154         "ubiblock=4\0" \
 155         "ubi=enabled"
 156
 157 /*
 158  * Miscellaneous configurable options
 159  */
 160 #define CONFIG_SYS_LONGHELP             /* undef to save memory */
 161 #define CONFIG_SYS_HUSH_PARSER          /* use "hush" command parser    */
 162 #define CONFIG_SYS_PROMPT               "SMDKC100 # "
 163 #define CONFIG_SYS_CBSIZE       256     /* Console I/O Buffer Size */
 164 #define CONFIG_SYS_PBSIZE       384     /* Print Buffer Size */
 165 #define CONFIG_SYS_MAXARGS      16      /* max number of command args */
 166 /* Boot Argument Buffer Size */
 167 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE
 168 /* memtest works on */
 169 #define CONFIG_SYS_MEMTEST_START        CONFIG_SYS_SDRAM_BASE
 170 #define CONFIG_SYS_MEMTEST_END          (CONFIG_SYS_SDRAM_BASE + 0x5e00000)
 171 #define CONFIG_SYS_LOAD_ADDR            CONFIG_SYS_SDRAM_BASE
 172
 173 /* SMDKC100 has 1 banks of DRAM, we use only one in U-Boot */
 174 #define CONFIG_NR_DRAM_BANKS    1
 175 #define PHYS_SDRAM_1            CONFIG_SYS_SDRAM_BASE   /* SDRAM Bank #1 */
 176 #define PHYS_SDRAM_1_SIZE       (128 << 20)     /* 0x8000000, 128 MB Bank #1 */
 177
 178 #define CONFIG_SYS_MONITOR_BASE 0x00000000
 179
 180 /*-----------------------------------------------------------------------
 181  * FLASH and environment organization
 182  */
 183 #define CONFIG_SYS_NO_FLASH             1
 184
 185 #define CONFIG_SYS_MONITOR_LEN          (256 << 10)     /* 256 KiB */
 186 #define CONFIG_IDENT_STRING             " for SMDKC100"
 187
 188 #if !defined(CONFIG_NAND_SPL) && (CONFIG_SYS_TEXT_BASE >= 0xc0000000)
 189 #define CONFIG_ENABLE_MMU
 190 #endif
 191
 192 #ifdef CONFIG_ENABLE_MMU
 193 #define CONFIG_SYS_MAPPED_RAM_BASE      0xc0000000
 194 #else
 195 #define CONFIG_SYS_MAPPED_RAM_BASE      CONFIG_SYS_SDRAM_BASE
 196 #endif
 197
 198 /*-----------------------------------------------------------------------
 199  * Boot configuration
 200  */
 201 #define CONFIG_ENV_IS_IN_ONENAND        1
 202 #define CONFIG_ENV_SIZE                 (128 << 10)     /* 128KiB, 0x20000 */
 203 #define CONFIG_ENV_ADDR                 (256 << 10)     /* 256KiB, 0x40000 */
 204 #define CONFIG_ENV_OFFSET               (256 << 10)     /* 256KiB, 0x40000 */
 205
 206 #define CONFIG_USE_ONENAND_BOARD_INIT
 207 #define CONFIG_SAMSUNG_ONENAND          1
 208 #define CONFIG_SYS_ONENAND_BASE         0xE7100000
 209
 210 #define CONFIG_DOS_PARTITION            1
 211
 212 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR - 0x1000000)
 213
 214 /*
 215  * Ethernet Contoller driver
 216  */
 217 #ifdef CONFIG_CMD_NET
 218 #define CONFIG_SMC911X         1       /* we have a SMC9115 on-board   */
 219 #define CONFIG_SMC911X_16_BIT  1       /* SMC911X_16_BIT Mode          */
 220 #define CONFIG_SMC911X_BASE    0x98800300      /* SMC911X Drive Base   */
 221 #define CONFIG_ENV_SROM_BANK   3       /* Select SROM Bank-3 for Ethernet*/
 222 #endif /* CONFIG_CMD_NET */
 223
 224 #define CONFIG_OF_LIBFDT
 225
 226 #define CONFIG_SYS_GENERIC_BOARD
 227 #define CONFIG_DM
 228 #define CONFIG_CMD_DM
 229 #define CONFIG_DM_GPIO
 230 #define CONFIG_DM_SERIAL
 231
 232 #endif  /* __CONFIG_H */