]> git.ipfire.org Git - people/ms/u-boot.git/blob - include/configs/smdkv310.h
configs: Re-sync almost all of cmd/Kconfig
[people/ms/u-boot.git] / include / configs / smdkv310.h
1 /*
2 * Copyright (C) 2011 Samsung Electronics
3 *
4 * Configuration settings for the SAMSUNG SMDKV310 (EXYNOS4210) board.
5 *
6 * SPDX-License-Identifier: GPL-2.0+
7 */
8
9 #ifndef __CONFIG_H
10 #define __CONFIG_H
11
12 #include "exynos4-common.h"
13
14 #undef CONFIG_BOARD_COMMON
15 #undef CONFIG_USB_GADGET_DWC2_OTG
16 #undef CONFIG_USB_GADGET_DWC2_OTG_PHY
17 #undef CONFIG_CMD_USB_MASS_STORAGE
18 #undef CONFIG_REVISION_TAG
19 #undef CONFIG_CMD_THOR_DOWNLOAD
20 #undef CONFIG_CMD_DFU
21
22 /* High Level Configuration Options */
23 #define CONFIG_EXYNOS4210 1 /* which is a EXYNOS4210 SoC */
24 #define CONFIG_SMDKV310 1 /* working with SMDKV310*/
25
26 /* Mach Type */
27 #define CONFIG_MACH_TYPE MACH_TYPE_SMDKV310
28
29 #define CONFIG_SYS_SDRAM_BASE 0x40000000
30 #define CONFIG_SYS_TEXT_BASE 0x43E00000
31
32 /* Handling Sleep Mode*/
33 #define S5P_CHECK_SLEEP 0x00000BAD
34 #define S5P_CHECK_DIDLE 0xBAD00000
35 #define S5P_CHECK_LPA 0xABAD0000
36
37 /* select serial console configuration */
38 #define CONFIG_SERIAL1 1 /* use SERIAL 1 */
39 #define EXYNOS4_DEFAULT_UART_OFFSET 0x010000
40
41 /* allow to overwrite serial and ethaddr */
42 #define CONFIG_ENV_OVERWRITE
43
44
45 /* MMC SPL */
46 #define CONFIG_SKIP_LOWLEVEL_INIT
47 #define COPY_BL2_FNPTR_ADDR 0x00002488
48
49 #define CONFIG_SPL_TEXT_BASE 0x02021410
50
51 #define CONFIG_BOOTCOMMAND "fatload mmc 0 40007000 uImage; bootm 40007000"
52
53 /* Miscellaneous configurable options */
54 #define CONFIG_DEFAULT_CONSOLE "console=ttySAC2,115200n8\0"
55 /* memtest works on */
56 #define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
57 #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x6000000)
58 #define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x3E00000)
59
60 /* SMDKV310 has 4 bank of DRAM */
61 #define CONFIG_NR_DRAM_BANKS 4
62 #define SDRAM_BANK_SIZE (512UL << 20UL) /* 512 MB */
63 #define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE
64 #define PHYS_SDRAM_1_SIZE SDRAM_BANK_SIZE
65 #define PHYS_SDRAM_2 (CONFIG_SYS_SDRAM_BASE + SDRAM_BANK_SIZE)
66 #define PHYS_SDRAM_2_SIZE SDRAM_BANK_SIZE
67 #define PHYS_SDRAM_3 (CONFIG_SYS_SDRAM_BASE + (2 * SDRAM_BANK_SIZE))
68 #define PHYS_SDRAM_3_SIZE SDRAM_BANK_SIZE
69 #define PHYS_SDRAM_4 (CONFIG_SYS_SDRAM_BASE + (3 * SDRAM_BANK_SIZE))
70 #define PHYS_SDRAM_4_SIZE SDRAM_BANK_SIZE
71
72 /* FLASH and environment organization */
73 #define CONFIG_IDENT_STRING " for SMDKC210/V310"
74
75 #define CONFIG_CLK_1000_400_200
76
77 /* MIU (Memory Interleaving Unit) */
78 #define CONFIG_MIU_2BIT_INTERLEAVED
79
80 #define CONFIG_ENV_IS_IN_MMC 1
81 #define CONFIG_SYS_MMC_ENV_DEV 0
82 #define CONFIG_ENV_SIZE (16 << 10) /* 16 KB */
83 #define RESERVE_BLOCK_SIZE (512)
84 #define BL1_SIZE (16 << 10) /*16 K reserved for BL1*/
85 #define CONFIG_ENV_OFFSET (RESERVE_BLOCK_SIZE + BL1_SIZE)
86
87 #define CONFIG_SPL_LDSCRIPT "board/samsung/common/exynos-uboot-spl.lds"
88 #define CONFIG_SPL_MAX_FOOTPRINT (14 * 1024)
89
90 #define CONFIG_SYS_INIT_SP_ADDR 0x02040000
91
92 /* U-Boot copy size from boot Media to DRAM.*/
93 #define COPY_BL2_SIZE 0x80000
94 #define BL2_START_OFFSET ((CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)/512)
95 #define BL2_SIZE_BLOC_COUNT (COPY_BL2_SIZE/512)
96
97 /* Ethernet Controllor Driver */
98 #ifdef CONFIG_CMD_NET
99 #define CONFIG_SMC911X
100 #define CONFIG_SMC911X_BASE 0x5000000
101 #define CONFIG_SMC911X_16_BIT
102 #define CONFIG_ENV_SROM_BANK 1
103 #endif /*CONFIG_CMD_NET*/
104
105 #endif /* __CONFIG_H */