include/configs/socfpga_common.h

   1 /*
   2  * Copyright (C) 2012 Altera Corporation <www.altera.com>
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6 #ifndef __CONFIG_SOCFPGA_COMMON_H__
   7 #define __CONFIG_SOCFPGA_COMMON_H__
   8
   9 /* Virtual target or real hardware */
  10 #undef CONFIG_SOCFPGA_VIRTUAL_TARGET
  11
  12 /*
  13  * High level configuration
  14  */
  15 #define CONFIG_DISPLAY_BOARDINFO_LATE
  16 #define CONFIG_CLOCKS
  17
  18 #define CONFIG_CRC32_VERIFY
  19
  20 #define CONFIG_SYS_BOOTMAPSZ            (64 * 1024 * 1024)
  21
  22 #define CONFIG_TIMESTAMP                /* Print image info with timestamp */
  23
  24 /* add target to build it automatically upon "make" */
  25 #define CONFIG_BUILD_TARGET             "u-boot-with-spl.sfp"
  26
  27 /*
  28  * Memory configurations
  29  */
  30 #define CONFIG_NR_DRAM_BANKS            1
  31 #define PHYS_SDRAM_1                    0x0
  32 #define CONFIG_SYS_MALLOC_LEN           (64 * 1024 * 1024)
  33 #define CONFIG_SYS_MEMTEST_START        PHYS_SDRAM_1
  34 #define CONFIG_SYS_MEMTEST_END          PHYS_SDRAM_1_SIZE
  35 #if defined(CONFIG_TARGET_SOCFPGA_GEN5)
  36 #define CONFIG_SYS_INIT_RAM_ADDR        0xFFFF0000
  37 #define CONFIG_SYS_INIT_RAM_SIZE        0x10000
  38 #elif defined(CONFIG_TARGET_SOCFPGA_ARRIA10)
  39 #define CONFIG_SYS_INIT_RAM_ADDR        0xFFE00000
  40 #define CONFIG_SYS_INIT_RAM_SIZE        0x40000 /* 256KB */
  41 #endif
  42 #define CONFIG_SYS_INIT_SP_OFFSET               \
  43         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
  44 #define CONFIG_SYS_INIT_SP_ADDR                 \
  45         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
  46
  47 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM_1
  48 #ifdef CONFIG_SOCFPGA_VIRTUAL_TARGET
  49 #define CONFIG_SYS_TEXT_BASE            0x08000040
  50 #else
  51 #define CONFIG_SYS_TEXT_BASE            0x01000040
  52 #endif
  53
  54 /*
  55  * U-Boot general configurations
  56  */
  57 #define CONFIG_SYS_LONGHELP
  58 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O buffer size */
  59 #define CONFIG_SYS_PBSIZE       \
  60         (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
  61                                                 /* Print buffer size */
  62 #define CONFIG_SYS_MAXARGS      32              /* Max number of command args */
  63 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE
  64                                                 /* Boot argument buffer size */
  65 #define CONFIG_AUTO_COMPLETE                    /* Command auto complete */
  66 #define CONFIG_CMDLINE_EDITING                  /* Command history etc */
  67
  68 #ifndef CONFIG_SYS_HOSTNAME
  69 #define CONFIG_SYS_HOSTNAME     CONFIG_SYS_BOARD
  70 #endif
  71
  72 #define CONFIG_CMD_PXE
  73 #define CONFIG_MENU
  74
  75 /*
  76  * Cache
  77  */
  78 #define CONFIG_SYS_L2_PL310
  79 #define CONFIG_SYS_PL310_BASE           SOCFPGA_MPUL2_ADDRESS
  80
  81 /*
  82  * EPCS/EPCQx1 Serial Flash Controller
  83  */
  84 #ifdef CONFIG_ALTERA_SPI
  85 #define CONFIG_SF_DEFAULT_SPEED         30000000
  86 /*
  87  * The base address is configurable in QSys, each board must specify the
  88  * base address based on it's particular FPGA configuration. Please note
  89  * that the address here is incremented by  0x400  from the Base address
  90  * selected in QSys, since the SPI registers are at offset +0x400.
  91  * #define CONFIG_SYS_SPI_BASE          0xff240400
  92  */
  93 #endif
  94
  95 /*
  96  * Ethernet on SoC (EMAC)
  97  */
  98 #if defined(CONFIG_CMD_NET) && !defined(CONFIG_SOCFPGA_VIRTUAL_TARGET)
  99 #define CONFIG_DW_ALTDESCRIPTOR
 100 #define CONFIG_MII
 101 #define CONFIG_AUTONEG_TIMEOUT          (15 * CONFIG_SYS_HZ)
 102 #define CONFIG_PHY_GIGE
 103 #endif
 104
 105 /*
 106  * FPGA Driver
 107  */
 108 #ifdef CONFIG_TARGET_SOCFPGA_GEN5
 109 #ifdef CONFIG_CMD_FPGA
 110 #define CONFIG_FPGA
 111 #define CONFIG_FPGA_ALTERA
 112 #define CONFIG_FPGA_SOCFPGA
 113 #define CONFIG_FPGA_COUNT               1
 114 #endif
 115 #endif
 116 /*
 117  * L4 OSC1 Timer 0
 118  */
 119 /* This timer uses eosc1, whose clock frequency is fixed at any condition. */
 120 #define CONFIG_SYS_TIMERBASE            SOCFPGA_OSC1TIMER0_ADDRESS
 121 #define CONFIG_SYS_TIMER_COUNTS_DOWN
 122 #define CONFIG_SYS_TIMER_COUNTER        (CONFIG_SYS_TIMERBASE + 0x4)
 123 #ifdef CONFIG_SOCFPGA_VIRTUAL_TARGET
 124 #define CONFIG_SYS_TIMER_RATE           2400000
 125 #else
 126 #define CONFIG_SYS_TIMER_RATE           25000000
 127 #endif
 128
 129 /*
 130  * L4 Watchdog
 131  */
 132 #ifdef CONFIG_HW_WATCHDOG
 133 #define CONFIG_DESIGNWARE_WATCHDOG
 134 #define CONFIG_DW_WDT_BASE              SOCFPGA_L4WD0_ADDRESS
 135 #define CONFIG_DW_WDT_CLOCK_KHZ         25000
 136 #define CONFIG_HW_WATCHDOG_TIMEOUT_MS   30000
 137 #endif
 138
 139 /*
 140  * MMC Driver
 141  */
 142 #ifdef CONFIG_CMD_MMC
 143 #define CONFIG_BOUNCE_BUFFER
 144 /* FIXME */
 145 /* using smaller max blk cnt to avoid flooding the limited stack we have */
 146 #define CONFIG_SYS_MMC_MAX_BLK_COUNT    256     /* FIXME -- SPL only? */
 147 #endif
 148
 149 /*
 150  * NAND Support
 151  */
 152 #ifdef CONFIG_NAND_DENALI
 153 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 154 #define CONFIG_SYS_NAND_MAX_CHIPS       1
 155 #define CONFIG_SYS_NAND_ONFI_DETECTION
 156 #define CONFIG_NAND_DENALI_ECC_SIZE     512
 157 #define CONFIG_SYS_NAND_REGS_BASE       SOCFPGA_NANDREGS_ADDRESS
 158 #define CONFIG_SYS_NAND_DATA_BASE       SOCFPGA_NANDDATA_ADDRESS
 159 #define CONFIG_SYS_NAND_BASE            (CONFIG_SYS_NAND_DATA_BASE + 0x10)
 160 #endif
 161
 162 /*
 163  * I2C support
 164  */
 165 #define CONFIG_SYS_I2C
 166 #define CONFIG_SYS_I2C_BUS_MAX          4
 167 #define CONFIG_SYS_I2C_BASE             SOCFPGA_I2C0_ADDRESS
 168 #define CONFIG_SYS_I2C_BASE1            SOCFPGA_I2C1_ADDRESS
 169 #define CONFIG_SYS_I2C_BASE2            SOCFPGA_I2C2_ADDRESS
 170 #define CONFIG_SYS_I2C_BASE3            SOCFPGA_I2C3_ADDRESS
 171 /* Using standard mode which the speed up to 100Kb/s */
 172 #define CONFIG_SYS_I2C_SPEED            100000
 173 #define CONFIG_SYS_I2C_SPEED1           100000
 174 #define CONFIG_SYS_I2C_SPEED2           100000
 175 #define CONFIG_SYS_I2C_SPEED3           100000
 176 /* Address of device when used as slave */
 177 #define CONFIG_SYS_I2C_SLAVE            0x02
 178 #define CONFIG_SYS_I2C_SLAVE1           0x02
 179 #define CONFIG_SYS_I2C_SLAVE2           0x02
 180 #define CONFIG_SYS_I2C_SLAVE3           0x02
 181 #ifndef __ASSEMBLY__
 182 /* Clock supplied to I2C controller in unit of MHz */
 183 unsigned int cm_get_l4_sp_clk_hz(void);
 184 #define IC_CLK                          (cm_get_l4_sp_clk_hz() / 1000000)
 185 #endif
 186
 187 /*
 188  * QSPI support
 189  */
 190 /* Enable multiple SPI NOR flash manufacturers */
 191 #ifndef CONFIG_SPL_BUILD
 192 #define CONFIG_SPI_FLASH_MTD
 193 #define CONFIG_CMD_MTDPARTS
 194 #define CONFIG_MTD_DEVICE
 195 #define CONFIG_MTD_PARTITIONS
 196 #define MTDIDS_DEFAULT                  "nor0=ff705000.spi.0"
 197 #endif
 198 /* QSPI reference clock */
 199 #ifndef __ASSEMBLY__
 200 unsigned int cm_get_qspi_controller_clk_hz(void);
 201 #define CONFIG_CQSPI_REF_CLK            cm_get_qspi_controller_clk_hz()
 202 #endif
 203 #define CONFIG_CQSPI_DECODER            0
 204 #define CONFIG_BOUNCE_BUFFER
 205
 206 /*
 207  * Designware SPI support
 208  */
 209
 210 /*
 211  * Serial Driver
 212  */
 213 #define CONFIG_SYS_NS16550_SERIAL
 214 #define CONFIG_SYS_NS16550_REG_SIZE     -4
 215 #ifdef CONFIG_SOCFPGA_VIRTUAL_TARGET
 216 #define CONFIG_SYS_NS16550_CLK          1000000
 217 #elif defined(CONFIG_TARGET_SOCFPGA_GEN5)
 218 #define CONFIG_SYS_NS16550_COM1         SOCFPGA_UART0_ADDRESS
 219 #define CONFIG_SYS_NS16550_CLK          100000000
 220 #elif defined(CONFIG_TARGET_SOCFPGA_ARRIA10)
 221 #define CONFIG_SYS_NS16550_COM1        SOCFPGA_UART1_ADDRESS
 222 #define CONFIG_SYS_NS16550_CLK          50000000
 223 #endif
 224 #define CONFIG_CONS_INDEX               1
 225
 226 /*
 227  * USB
 228  */
 229 #ifdef CONFIG_CMD_USB
 230 #define CONFIG_USB_DWC2
 231 #endif
 232
 233 /*
 234  * USB Gadget (DFU, UMS)
 235  */
 236 #if defined(CONFIG_CMD_DFU) || defined(CONFIG_CMD_USB_MASS_STORAGE)
 237 #define CONFIG_USB_FUNCTION_MASS_STORAGE
 238
 239 #define CONFIG_SYS_DFU_DATA_BUF_SIZE    (16 * 1024 * 1024)
 240 #define DFU_DEFAULT_POLL_TIMEOUT        300
 241
 242 /* USB IDs */
 243 #define CONFIG_G_DNL_UMS_VENDOR_NUM     0x0525
 244 #define CONFIG_G_DNL_UMS_PRODUCT_NUM    0xA4A5
 245 #endif
 246
 247 /*
 248  * U-Boot environment
 249  */
 250 #if !defined(CONFIG_ENV_SIZE)
 251 #define CONFIG_ENV_SIZE                 (8 * 1024)
 252 #endif
 253
 254 /* Environment for SDMMC boot */
 255 #if defined(CONFIG_ENV_IS_IN_MMC) && !defined(CONFIG_ENV_OFFSET)
 256 #define CONFIG_SYS_MMC_ENV_DEV          0 /* device 0 */
 257 #define CONFIG_ENV_OFFSET               (34 * 512) /* just after the GPT */
 258 #endif
 259
 260 /* Environment for QSPI boot */
 261 #if defined(CONFIG_ENV_IS_IN_SPI_FLASH) && !defined(CONFIG_ENV_OFFSET)
 262 #define CONFIG_ENV_OFFSET               0x00100000
 263 #define CONFIG_ENV_SECT_SIZE            (64 * 1024)
 264 #endif
 265
 266 /*
 267  * mtd partitioning for serial NOR flash
 268  *
 269  * device nor0 <ff705000.spi.0>, # parts = 6
 270  * #: name                size            offset          mask_flags
 271  * 0: u-boot              0x00100000      0x00000000      0
 272  * 1: env1                0x00040000      0x00100000      0
 273  * 2: env2                0x00040000      0x00140000      0
 274  * 3: UBI                 0x03e80000      0x00180000      0
 275  * 4: boot                0x00e80000      0x00180000      0
 276  * 5: rootfs              0x01000000      0x01000000      0
 277  *
 278  */
 279 #if defined(CONFIG_CMD_SF) && !defined(MTDPARTS_DEFAULT)
 280 #define MTDPARTS_DEFAULT        "mtdparts=ff705000.spi.0:"\
 281                                 "1m(u-boot),"           \
 282                                 "256k(env1),"           \
 283                                 "256k(env2),"           \
 284                                 "14848k(boot),"         \
 285                                 "16m(rootfs),"          \
 286                                 "-@1536k(UBI)\0"
 287 #endif
 288
 289 /* UBI and UBIFS support */
 290 #if defined(CONFIG_CMD_SF) || defined(CONFIG_CMD_NAND)
 291 #define CONFIG_CMD_UBIFS
 292 #define CONFIG_RBTREE
 293 #define CONFIG_LZO
 294 #endif
 295
 296 /*
 297  * SPL
 298  *
 299  * SRAM Memory layout:
 300  *
 301  * 0xFFFF_0000 ...... Start of SRAM
 302  * 0xFFFF_xxxx ...... Top of stack (grows down)
 303  * 0xFFFF_yyyy ...... Malloc area
 304  * 0xFFFF_zzzz ...... Global Data
 305  * 0xFFFF_FF00 ...... End of SRAM
 306  */
 307 #define CONFIG_SPL_FRAMEWORK
 308 #define CONFIG_SPL_TEXT_BASE            CONFIG_SYS_INIT_RAM_ADDR
 309 #define CONFIG_SPL_MAX_SIZE             CONFIG_SYS_INIT_RAM_SIZE
 310
 311 /* SPL SDMMC boot support */
 312 #ifdef CONFIG_SPL_MMC_SUPPORT
 313 #if defined(CONFIG_SPL_FAT_SUPPORT) || defined(CONFIG_SPL_EXT_SUPPORT)
 314 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME         "u-boot-dtb.img"
 315 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION      1
 316 #endif
 317 #else
 318 #ifndef CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION
 319 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION      1
 320 #endif
 321 #endif
 322
 323 /* SPL QSPI boot support */
 324 #ifdef CONFIG_SPL_SPI_SUPPORT
 325 #define CONFIG_SPL_SPI_LOAD
 326 #define CONFIG_SYS_SPI_U_BOOT_OFFS      0x40000
 327 #endif
 328
 329 /* SPL NAND boot support */
 330 #ifdef CONFIG_SPL_NAND_SUPPORT
 331 #define CONFIG_SYS_NAND_USE_FLASH_BBT
 332 #define CONFIG_SYS_NAND_BAD_BLOCK_POS   0
 333 #define CONFIG_SYS_NAND_U_BOOT_OFFS     0x40000
 334 #endif
 335
 336 /*
 337  * Stack setup
 338  */
 339 #define CONFIG_SPL_STACK                CONFIG_SYS_INIT_SP_ADDR
 340
 341 /* Extra Environment */
 342 #ifndef CONFIG_SPL_BUILD
 343 #include <config_distro_defaults.h>
 344
 345 #ifdef CONFIG_CMD_PXE
 346 #define BOOT_TARGET_DEVICES_PXE(func) func(PXE, pxe, na)
 347 #else
 348 #define BOOT_TARGET_DEVICES_PXE(func)
 349 #endif
 350
 351 #ifdef CONFIG_CMD_MMC
 352 #define BOOT_TARGET_DEVICES_MMC(func) func(MMC, mmc, 0)
 353 #else
 354 #define BOOT_TARGET_DEVICES_MMC(func)
 355 #endif
 356
 357 #define BOOT_TARGET_DEVICES(func) \
 358         BOOT_TARGET_DEVICES_MMC(func) \
 359         BOOT_TARGET_DEVICES_PXE(func) \
 360         func(DHCP, dhcp, na)
 361
 362 #include <config_distro_bootcmd.h>
 363
 364 #ifndef CONFIG_EXTRA_ENV_SETTINGS
 365 #define CONFIG_EXTRA_ENV_SETTINGS \
 366         "fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \
 367         "bootm_size=0xa000000\0" \
 368         "kernel_addr_r="__stringify(CONFIG_SYS_LOAD_ADDR)"\0" \
 369         "fdt_addr_r=0x02000000\0" \
 370         "scriptaddr=0x02100000\0" \
 371         "pxefile_addr_r=0x02200000\0" \
 372         "ramdisk_addr_r=0x02300000\0" \
 373         BOOTENV
 374
 375 #endif
 376 #endif
 377
 378 #endif  /* __CONFIG_SOCFPGA_COMMON_H__ */