include/configs/socfpga_common.h

   1 /*
   2  * Copyright (C) 2012 Altera Corporation <www.altera.com>
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6 #ifndef __CONFIG_SOCFPGA_COMMON_H__
   7 #define __CONFIG_SOCFPGA_COMMON_H__
   8
   9 /* Virtual target or real hardware */
  10 #undef CONFIG_SOCFPGA_VIRTUAL_TARGET
  11
  12 /*
  13  * High level configuration
  14  */
  15 #define CONFIG_DISPLAY_BOARDINFO_LATE
  16 #define CONFIG_CLOCKS
  17
  18 #define CONFIG_SYS_BOOTMAPSZ            (64 * 1024 * 1024)
  19
  20 #define CONFIG_TIMESTAMP                /* Print image info with timestamp */
  21
  22 /* add target to build it automatically upon "make" */
  23 #define CONFIG_BUILD_TARGET             "u-boot-with-spl.sfp"
  24
  25 /*
  26  * Memory configurations
  27  */
  28 #define CONFIG_NR_DRAM_BANKS            1
  29 #define PHYS_SDRAM_1                    0x0
  30 #define CONFIG_SYS_MALLOC_LEN           (64 * 1024 * 1024)
  31 #define CONFIG_SYS_MEMTEST_START        PHYS_SDRAM_1
  32 #define CONFIG_SYS_MEMTEST_END          PHYS_SDRAM_1_SIZE
  33 #if defined(CONFIG_TARGET_SOCFPGA_GEN5)
  34 #define CONFIG_SYS_INIT_RAM_ADDR        0xFFFF0000
  35 #define CONFIG_SYS_INIT_RAM_SIZE        0x10000
  36 #elif defined(CONFIG_TARGET_SOCFPGA_ARRIA10)
  37 #define CONFIG_SYS_INIT_RAM_ADDR        0xFFE00000
  38 #define CONFIG_SYS_INIT_RAM_SIZE        0x40000 /* 256KB */
  39 #endif
  40 #define CONFIG_SYS_INIT_SP_OFFSET               \
  41         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
  42 #define CONFIG_SYS_INIT_SP_ADDR                 \
  43         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
  44
  45 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM_1
  46 #ifdef CONFIG_SOCFPGA_VIRTUAL_TARGET
  47 #define CONFIG_SYS_TEXT_BASE            0x08000040
  48 #else
  49 #define CONFIG_SYS_TEXT_BASE            0x01000040
  50 #endif
  51
  52 /*
  53  * U-Boot general configurations
  54  */
  55 #define CONFIG_SYS_LONGHELP
  56 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O buffer size */
  57 #define CONFIG_SYS_PBSIZE       \
  58         (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
  59                                                 /* Print buffer size */
  60 #define CONFIG_SYS_MAXARGS      32              /* Max number of command args */
  61 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE
  62                                                 /* Boot argument buffer size */
  63 #define CONFIG_AUTO_COMPLETE                    /* Command auto complete */
  64 #define CONFIG_CMDLINE_EDITING                  /* Command history etc */
  65
  66 #ifndef CONFIG_SYS_HOSTNAME
  67 #define CONFIG_SYS_HOSTNAME     CONFIG_SYS_BOARD
  68 #endif
  69
  70 #define CONFIG_CMD_PXE
  71 #define CONFIG_MENU
  72
  73 /*
  74  * Cache
  75  */
  76 #define CONFIG_SYS_L2_PL310
  77 #define CONFIG_SYS_PL310_BASE           SOCFPGA_MPUL2_ADDRESS
  78
  79 /*
  80  * EPCS/EPCQx1 Serial Flash Controller
  81  */
  82 #ifdef CONFIG_ALTERA_SPI
  83 #define CONFIG_SF_DEFAULT_SPEED         30000000
  84 /*
  85  * The base address is configurable in QSys, each board must specify the
  86  * base address based on it's particular FPGA configuration. Please note
  87  * that the address here is incremented by  0x400  from the Base address
  88  * selected in QSys, since the SPI registers are at offset +0x400.
  89  * #define CONFIG_SYS_SPI_BASE          0xff240400
  90  */
  91 #endif
  92
  93 /*
  94  * Ethernet on SoC (EMAC)
  95  */
  96 #if defined(CONFIG_CMD_NET) && !defined(CONFIG_SOCFPGA_VIRTUAL_TARGET)
  97 #define CONFIG_DW_ALTDESCRIPTOR
  98 #define CONFIG_MII
  99 #define CONFIG_AUTONEG_TIMEOUT          (15 * CONFIG_SYS_HZ)
 100 #define CONFIG_PHY_GIGE
 101 #endif
 102
 103 /*
 104  * FPGA Driver
 105  */
 106 #ifdef CONFIG_TARGET_SOCFPGA_GEN5
 107 #ifdef CONFIG_CMD_FPGA
 108 #define CONFIG_FPGA
 109 #define CONFIG_FPGA_ALTERA
 110 #define CONFIG_FPGA_SOCFPGA
 111 #define CONFIG_FPGA_COUNT               1
 112 #endif
 113 #endif
 114 /*
 115  * L4 OSC1 Timer 0
 116  */
 117 /* This timer uses eosc1, whose clock frequency is fixed at any condition. */
 118 #define CONFIG_SYS_TIMERBASE            SOCFPGA_OSC1TIMER0_ADDRESS
 119 #define CONFIG_SYS_TIMER_COUNTS_DOWN
 120 #define CONFIG_SYS_TIMER_COUNTER        (CONFIG_SYS_TIMERBASE + 0x4)
 121 #ifdef CONFIG_SOCFPGA_VIRTUAL_TARGET
 122 #define CONFIG_SYS_TIMER_RATE           2400000
 123 #else
 124 #define CONFIG_SYS_TIMER_RATE           25000000
 125 #endif
 126
 127 /*
 128  * L4 Watchdog
 129  */
 130 #ifdef CONFIG_HW_WATCHDOG
 131 #define CONFIG_DESIGNWARE_WATCHDOG
 132 #define CONFIG_DW_WDT_BASE              SOCFPGA_L4WD0_ADDRESS
 133 #define CONFIG_DW_WDT_CLOCK_KHZ         25000
 134 #define CONFIG_WATCHDOG_TIMEOUT_MSECS   30000
 135 #endif
 136
 137 /*
 138  * MMC Driver
 139  */
 140 #ifdef CONFIG_CMD_MMC
 141 #define CONFIG_BOUNCE_BUFFER
 142 /* FIXME */
 143 /* using smaller max blk cnt to avoid flooding the limited stack we have */
 144 #define CONFIG_SYS_MMC_MAX_BLK_COUNT    256     /* FIXME -- SPL only? */
 145 #endif
 146
 147 /*
 148  * NAND Support
 149  */
 150 #ifdef CONFIG_NAND_DENALI
 151 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 152 #define CONFIG_SYS_NAND_MAX_CHIPS       1
 153 #define CONFIG_SYS_NAND_ONFI_DETECTION
 154 #define CONFIG_NAND_DENALI_ECC_SIZE     512
 155 #define CONFIG_SYS_NAND_REGS_BASE       SOCFPGA_NANDREGS_ADDRESS
 156 #define CONFIG_SYS_NAND_DATA_BASE       SOCFPGA_NANDDATA_ADDRESS
 157 #define CONFIG_SYS_NAND_BASE            (CONFIG_SYS_NAND_DATA_BASE + 0x10)
 158 #endif
 159
 160 /*
 161  * I2C support
 162  */
 163 #define CONFIG_SYS_I2C
 164 #define CONFIG_SYS_I2C_BUS_MAX          4
 165 #define CONFIG_SYS_I2C_BASE             SOCFPGA_I2C0_ADDRESS
 166 #define CONFIG_SYS_I2C_BASE1            SOCFPGA_I2C1_ADDRESS
 167 #define CONFIG_SYS_I2C_BASE2            SOCFPGA_I2C2_ADDRESS
 168 #define CONFIG_SYS_I2C_BASE3            SOCFPGA_I2C3_ADDRESS
 169 /* Using standard mode which the speed up to 100Kb/s */
 170 #define CONFIG_SYS_I2C_SPEED            100000
 171 #define CONFIG_SYS_I2C_SPEED1           100000
 172 #define CONFIG_SYS_I2C_SPEED2           100000
 173 #define CONFIG_SYS_I2C_SPEED3           100000
 174 /* Address of device when used as slave */
 175 #define CONFIG_SYS_I2C_SLAVE            0x02
 176 #define CONFIG_SYS_I2C_SLAVE1           0x02
 177 #define CONFIG_SYS_I2C_SLAVE2           0x02
 178 #define CONFIG_SYS_I2C_SLAVE3           0x02
 179 #ifndef __ASSEMBLY__
 180 /* Clock supplied to I2C controller in unit of MHz */
 181 unsigned int cm_get_l4_sp_clk_hz(void);
 182 #define IC_CLK                          (cm_get_l4_sp_clk_hz() / 1000000)
 183 #endif
 184
 185 /*
 186  * QSPI support
 187  */
 188 /* Enable multiple SPI NOR flash manufacturers */
 189 #ifndef CONFIG_SPL_BUILD
 190 #define CONFIG_SPI_FLASH_MTD
 191 #define CONFIG_CMD_MTDPARTS
 192 #define CONFIG_MTD_DEVICE
 193 #define CONFIG_MTD_PARTITIONS
 194 #define MTDIDS_DEFAULT                  "nor0=ff705000.spi.0"
 195 #endif
 196 /* QSPI reference clock */
 197 #ifndef __ASSEMBLY__
 198 unsigned int cm_get_qspi_controller_clk_hz(void);
 199 #define CONFIG_CQSPI_REF_CLK            cm_get_qspi_controller_clk_hz()
 200 #endif
 201 #define CONFIG_CQSPI_DECODER            0
 202 #define CONFIG_BOUNCE_BUFFER
 203
 204 /*
 205  * Designware SPI support
 206  */
 207
 208 /*
 209  * Serial Driver
 210  */
 211 #define CONFIG_SYS_NS16550_SERIAL
 212 #define CONFIG_SYS_NS16550_REG_SIZE     -4
 213 #ifdef CONFIG_SOCFPGA_VIRTUAL_TARGET
 214 #define CONFIG_SYS_NS16550_CLK          1000000
 215 #elif defined(CONFIG_TARGET_SOCFPGA_GEN5)
 216 #define CONFIG_SYS_NS16550_COM1         SOCFPGA_UART0_ADDRESS
 217 #define CONFIG_SYS_NS16550_CLK          100000000
 218 #elif defined(CONFIG_TARGET_SOCFPGA_ARRIA10)
 219 #define CONFIG_SYS_NS16550_COM1        SOCFPGA_UART1_ADDRESS
 220 #define CONFIG_SYS_NS16550_CLK          50000000
 221 #endif
 222 #define CONFIG_CONS_INDEX               1
 223
 224 /*
 225  * USB
 226  */
 227 #ifdef CONFIG_CMD_USB
 228 #define CONFIG_USB_DWC2
 229 #endif
 230
 231 /*
 232  * USB Gadget (DFU, UMS)
 233  */
 234 #if defined(CONFIG_CMD_DFU) || defined(CONFIG_CMD_USB_MASS_STORAGE)
 235 #define CONFIG_USB_FUNCTION_MASS_STORAGE
 236
 237 #define CONFIG_SYS_DFU_DATA_BUF_SIZE    (16 * 1024 * 1024)
 238 #define DFU_DEFAULT_POLL_TIMEOUT        300
 239
 240 /* USB IDs */
 241 #define CONFIG_G_DNL_UMS_VENDOR_NUM     0x0525
 242 #define CONFIG_G_DNL_UMS_PRODUCT_NUM    0xA4A5
 243 #endif
 244
 245 /*
 246  * U-Boot environment
 247  */
 248 #if !defined(CONFIG_ENV_SIZE)
 249 #define CONFIG_ENV_SIZE                 (8 * 1024)
 250 #endif
 251
 252 /* Environment for SDMMC boot */
 253 #if defined(CONFIG_ENV_IS_IN_MMC) && !defined(CONFIG_ENV_OFFSET)
 254 #define CONFIG_SYS_MMC_ENV_DEV          0 /* device 0 */
 255 #define CONFIG_ENV_OFFSET               (34 * 512) /* just after the GPT */
 256 #endif
 257
 258 /* Environment for QSPI boot */
 259 #if defined(CONFIG_ENV_IS_IN_SPI_FLASH) && !defined(CONFIG_ENV_OFFSET)
 260 #define CONFIG_ENV_OFFSET               0x00100000
 261 #define CONFIG_ENV_SECT_SIZE            (64 * 1024)
 262 #endif
 263
 264 /*
 265  * mtd partitioning for serial NOR flash
 266  *
 267  * device nor0 <ff705000.spi.0>, # parts = 6
 268  * #: name                size            offset          mask_flags
 269  * 0: u-boot              0x00100000      0x00000000      0
 270  * 1: env1                0x00040000      0x00100000      0
 271  * 2: env2                0x00040000      0x00140000      0
 272  * 3: UBI                 0x03e80000      0x00180000      0
 273  * 4: boot                0x00e80000      0x00180000      0
 274  * 5: rootfs              0x01000000      0x01000000      0
 275  *
 276  */
 277 #if defined(CONFIG_CMD_SF) && !defined(MTDPARTS_DEFAULT)
 278 #define MTDPARTS_DEFAULT        "mtdparts=ff705000.spi.0:"\
 279                                 "1m(u-boot),"           \
 280                                 "256k(env1),"           \
 281                                 "256k(env2),"           \
 282                                 "14848k(boot),"         \
 283                                 "16m(rootfs),"          \
 284                                 "-@1536k(UBI)\0"
 285 #endif
 286
 287 /* UBI and UBIFS support */
 288 #if defined(CONFIG_CMD_SF) || defined(CONFIG_CMD_NAND)
 289 #define CONFIG_CMD_UBIFS
 290 #define CONFIG_RBTREE
 291 #define CONFIG_LZO
 292 #endif
 293
 294 /*
 295  * SPL
 296  *
 297  * SRAM Memory layout:
 298  *
 299  * 0xFFFF_0000 ...... Start of SRAM
 300  * 0xFFFF_xxxx ...... Top of stack (grows down)
 301  * 0xFFFF_yyyy ...... Malloc area
 302  * 0xFFFF_zzzz ...... Global Data
 303  * 0xFFFF_FF00 ...... End of SRAM
 304  */
 305 #define CONFIG_SPL_FRAMEWORK
 306 #define CONFIG_SPL_TEXT_BASE            CONFIG_SYS_INIT_RAM_ADDR
 307 #define CONFIG_SPL_MAX_SIZE             CONFIG_SYS_INIT_RAM_SIZE
 308
 309 /* SPL SDMMC boot support */
 310 #ifdef CONFIG_SPL_MMC_SUPPORT
 311 #if defined(CONFIG_SPL_FAT_SUPPORT) || defined(CONFIG_SPL_EXT_SUPPORT)
 312 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME         "u-boot-dtb.img"
 313 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION      1
 314 #endif
 315 #else
 316 #ifndef CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION
 317 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION      1
 318 #endif
 319 #endif
 320
 321 /* SPL QSPI boot support */
 322 #ifdef CONFIG_SPL_SPI_SUPPORT
 323 #define CONFIG_SPL_SPI_LOAD
 324 #define CONFIG_SYS_SPI_U_BOOT_OFFS      0x40000
 325 #endif
 326
 327 /* SPL NAND boot support */
 328 #ifdef CONFIG_SPL_NAND_SUPPORT
 329 #define CONFIG_SYS_NAND_USE_FLASH_BBT
 330 #define CONFIG_SYS_NAND_BAD_BLOCK_POS   0
 331 #define CONFIG_SYS_NAND_U_BOOT_OFFS     0x40000
 332 #endif
 333
 334 /*
 335  * Stack setup
 336  */
 337 #define CONFIG_SPL_STACK                CONFIG_SYS_INIT_SP_ADDR
 338
 339 /* Extra Environment */
 340 #ifndef CONFIG_SPL_BUILD
 341 #include <config_distro_defaults.h>
 342
 343 #ifdef CONFIG_CMD_PXE
 344 #define BOOT_TARGET_DEVICES_PXE(func) func(PXE, pxe, na)
 345 #else
 346 #define BOOT_TARGET_DEVICES_PXE(func)
 347 #endif
 348
 349 #ifdef CONFIG_CMD_MMC
 350 #define BOOT_TARGET_DEVICES_MMC(func) func(MMC, mmc, 0)
 351 #else
 352 #define BOOT_TARGET_DEVICES_MMC(func)
 353 #endif
 354
 355 #define BOOT_TARGET_DEVICES(func) \
 356         BOOT_TARGET_DEVICES_MMC(func) \
 357         BOOT_TARGET_DEVICES_PXE(func) \
 358         func(DHCP, dhcp, na)
 359
 360 #include <config_distro_bootcmd.h>
 361
 362 #ifndef CONFIG_EXTRA_ENV_SETTINGS
 363 #define CONFIG_EXTRA_ENV_SETTINGS \
 364         "fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \
 365         "bootm_size=0xa000000\0" \
 366         "kernel_addr_r="__stringify(CONFIG_SYS_LOAD_ADDR)"\0" \
 367         "fdt_addr_r=0x02000000\0" \
 368         "scriptaddr=0x02100000\0" \
 369         "pxefile_addr_r=0x02200000\0" \
 370         "ramdisk_addr_r=0x02300000\0" \
 371         BOOTENV
 372
 373 #endif
 374 #endif
 375
 376 #endif  /* __CONFIG_SOCFPGA_COMMON_H__ */