include/configs/socfpga_mcvevk.h

   1 /*
   2  * Copyright (C) 2015 Marek Vasut <marex@denx.de>
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6 #ifndef __CONFIG_DENX_MCVEVK_H__
   7 #define __CONFIG_DENX_MCVEVK_H__
   8
   9 #include <asm/arch/base_addr_ac5.h>
  10
  11 /* U-Boot Commands */
  12 #define CONFIG_SYS_NO_FLASH
  13 #define CONFIG_FAT_WRITE
  14 #define CONFIG_HW_WATCHDOG
  15
  16 /* Memory configurations */
  17 #define PHYS_SDRAM_1_SIZE               0x40000000      /* 1GiB on MCV */
  18
  19 /* Booting Linux */
  20 #define CONFIG_BOOTFILE         "fitImage"
  21 #define CONFIG_BOOTARGS         "console=ttyS0," __stringify(CONFIG_BAUDRATE)
  22 #define CONFIG_PREBOOT          "run try_bootscript"
  23 #define CONFIG_BOOTCOMMAND      "run mmc_mmc"
  24 #define CONFIG_LOADADDR         0x01000000
  25 #define CONFIG_SYS_LOAD_ADDR    CONFIG_LOADADDR
  26
  27 /* Environment is in MMC */
  28 #define CONFIG_ENV_OVERWRITE
  29 #define CONFIG_ENV_IS_IN_MMC
  30
  31 /* Extra Environment */
  32 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
  33         "consdev=ttyS0\0"                                               \
  34         "baudrate=115200\0"                                             \
  35         "bootscript=boot.scr\0"                                         \
  36         "bootdev=/dev/mmcblk0p2\0"                                      \
  37         "rootdev=/dev/mmcblk0p3\0"                                      \
  38         "netdev=eth0\0"                                                 \
  39         "hostname=mcvevk\0"                                             \
  40         "kernel_addr_r=0x10000000\0"                                    \
  41         "update_filename=u-boot-with-spl.sfp\0"                         \
  42         "update_sd_offset=0x800\0"                                      \
  43         "update_sd="            /* Update the SD firmware partition */  \
  44                 "if mmc rescan ; then "                                 \
  45                 "if tftp ${update_filename} ; then "                    \
  46                 "setexpr fw_sz ${filesize} / 0x200 ; "  /* SD block size */ \
  47                 "setexpr fw_sz ${fw_sz} + 1 ; "                         \
  48                 "mmc write ${loadaddr} ${update_sd_offset} ${fw_sz} ; " \
  49                 "fi ; "                                                 \
  50                 "fi\0"                                                  \
  51         "update_qspi_offset=0x0\0"                                      \
  52         "update_qspi="          /* Update the QSPI firmware */          \
  53                 "if sf probe ; then "                                   \
  54                 "if tftp ${update_filename} ; then "                    \
  55                 "sf update ${loadaddr} ${update_qspi_offset} ${filesize} ; " \
  56                 "fi ; "                                                 \
  57                 "fi\0"                                                  \
  58         "fpga_filename=output_file.rbf\0"                               \
  59         "load_fpga="            /* Load FPGA bitstream */               \
  60                 "if tftp ${fpga_filename} ; then "                      \
  61                 "fpga load 0 $loadaddr $filesize ; "                    \
  62                 "bridge enable ; "                                      \
  63                 "fi\0"                                                  \
  64         "addcons="                                                      \
  65                 "setenv bootargs ${bootargs} "                          \
  66                 "console=${consdev},${baudrate}\0"                      \
  67         "addip="                                                        \
  68                 "setenv bootargs ${bootargs} "                          \
  69                 "ip=${ipaddr}:${serverip}:${gatewayip}:"                \
  70                         "${netmask}:${hostname}:${netdev}:off\0"        \
  71         "addmisc="                                                      \
  72                 "setenv bootargs ${bootargs} ${miscargs}\0"             \
  73         "addargs=run addcons addmisc\0"                                 \
  74         "mmcload="                                                      \
  75                 "mmc rescan ; "                                         \
  76                 "load mmc 0:2 ${kernel_addr_r} ${bootfile}\0"           \
  77         "netload="                                                      \
  78                 "tftp ${kernel_addr_r} ${hostname}/${bootfile}\0"       \
  79         "miscargs=nohlt panic=1\0"                                      \
  80         "mmcargs=setenv bootargs root=${rootdev} rw rootwait\0"         \
  81         "nfsargs="                                                      \
  82                 "setenv bootargs root=/dev/nfs rw "                     \
  83                         "nfsroot=${serverip}:${rootpath},v3,tcp\0"      \
  84         "mmc_mmc="                                                      \
  85                 "run mmcload mmcargs addargs ; "                        \
  86                 "bootm ${kernel_addr_r}\0"                              \
  87         "mmc_nfs="                                                      \
  88                 "run mmcload nfsargs addip addargs ; "                  \
  89                 "bootm ${kernel_addr_r}\0"                              \
  90         "net_mmc="                                                      \
  91                 "run netload mmcargs addargs ; "                        \
  92                 "bootm ${kernel_addr_r}\0"                              \
  93         "net_nfs="                                                      \
  94                 "run netload nfsargs addip addargs ; "                  \
  95                 "bootm ${kernel_addr_r}\0"                              \
  96         "try_bootscript="                                               \
  97                 "mmc rescan;"                                           \
  98                 "if test -e mmc 0:2 ${bootscript} ; then "              \
  99                 "if load mmc 0:2 ${kernel_addr_r} ${bootscript};"       \
 100                 "then ; "                                               \
 101                         "echo Running bootscript... ; "                 \
 102                         "source ${kernel_addr_r} ; "                    \
 103                 "fi ; "                                                 \
 104                 "fi\0"
 105
 106 /* The rest of the configuration is shared */
 107 #include <configs/socfpga_common.h>
 108
 109 #endif  /* __CONFIG_DENX_MCVEVK_H__ */