]> git.ipfire.org Git - people/ms/u-boot.git/blob - include/configs/spear-common.h
SPEAr: Enable usb device high speed support
[people/ms/u-boot.git] / include / configs / spear-common.h
1 /*
2 * (C) Copyright 2009
3 * Vipin Kumar, STMicroelectronics, <vipin.kumar@st.com>
4 *
5 * See file CREDITS for list of people who contributed to this
6 * project.
7 *
8 * This program is free software; you can redistribute it and/or
9 * modify it under the terms of the GNU General Public License as
10 * published by the Free Software Foundation; either version 2 of
11 * the License, or (at your option) any later version.
12 *
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
17 *
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
21 * MA 02111-1307 USA
22 */
23
24 #ifndef _SPEAR_COMMON_H
25 #define _SPEAR_COMMON_H
26 /*
27 * Common configurations used for both spear3xx as well as spear6xx
28 */
29
30 /* U-boot Load Address */
31 #define CONFIG_SYS_TEXT_BASE 0x00700000
32
33 /* Ethernet driver configuration */
34 #define CONFIG_MII
35 #define CONFIG_DESIGNWARE_ETH
36 #define CONFIG_DW_SEARCH_PHY
37 #define CONFIG_DW0_PHY 1
38 #define CONFIG_NET_MULTI
39 #define CONFIG_PHY_RESET_DELAY 10000 /* in usec */
40
41 /* USBD driver configuration */
42 #define CONFIG_DW_UDC
43 #define CONFIG_USB_DEVICE
44 #define CONFIG_USBD_HS
45 #define CONFIG_USB_TTY
46
47 #define CONFIG_USBD_PRODUCT_NAME "SPEAr SoC"
48 #define CONFIG_USBD_MANUFACTURER "ST Microelectronics"
49
50 #define CONFIG_EXTRA_ENV_USBTTY "usbtty=cdc_acm\0"
51
52 /* I2C driver configuration */
53 #define CONFIG_HARD_I2C
54 #define CONFIG_DW_I2C
55 #define CONFIG_SYS_I2C_SPEED 400000
56 #define CONFIG_SYS_I2C_SLAVE 0x02
57
58 #define CONFIG_I2C_CHIPADDRESS 0x50
59
60 /* Timer, HZ specific defines */
61 #define CONFIG_SYS_HZ (1000)
62
63 /* Flash configuration */
64 #if defined(CONFIG_FLASH_PNOR)
65 #define CONFIG_SPEAR_EMI 1
66 #else
67 #define CONFIG_ST_SMI
68 #endif
69
70 #if defined(CONFIG_ST_SMI)
71
72 #define CONFIG_SYS_MAX_FLASH_BANKS 2
73 #define CONFIG_SYS_FLASH_BASE (0xF8000000)
74 #define CONFIG_SYS_CS1_FLASH_BASE (0xF9000000)
75 #define CONFIG_SYS_FLASH_BANK_SIZE (0x01000000)
76 #define CONFIG_SYS_FLASH_ADDR_BASE {CONFIG_SYS_FLASH_BASE, \
77 CONFIG_SYS_CS1_FLASH_BASE}
78 #define CONFIG_SYS_MAX_FLASH_SECT 128
79
80 #define CONFIG_SYS_FLASH_EMPTY_INFO 1
81 #define CONFIG_SYS_FLASH_ERASE_TOUT (3 * CONFIG_SYS_HZ)
82 #define CONFIG_SYS_FLASH_WRITE_TOUT (3 * CONFIG_SYS_HZ)
83
84 #endif
85
86 /*
87 * Serial Configuration (PL011)
88 * CONFIG_PL01x_PORTS is defined in specific files
89 */
90 #define CONFIG_PL011_SERIAL
91 #define CONFIG_PL011_CLOCK (48 * 1000 * 1000)
92 #define CONFIG_CONS_INDEX 0
93 #define CONFIG_BAUDRATE 115200
94 #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, \
95 57600, 115200 }
96
97 #define CONFIG_SYS_LOADS_BAUD_CHANGE
98
99 /* NAND FLASH Configuration */
100 #define CONFIG_SYS_NAND_SELF_INIT
101 #define CONFIG_MTD_DEVICE
102 #define CONFIG_MTD_PARTITIONS
103 #define CONFIG_NAND_FSMC
104 #define CONFIG_SYS_MAX_NAND_DEVICE 1
105 #define CONFIG_MTD_NAND_VERIFY_WRITE 1
106
107 /*
108 * Command support defines
109 */
110 #define CONFIG_CMD_I2C
111 #define CONFIG_CMD_NAND
112 #define CONFIG_CMD_ENV
113 #define CONFIG_CMD_MEMORY
114 #define CONFIG_CMD_RUN
115 #define CONFIG_CMD_SAVES
116 #define CONFIG_CMD_NET
117 #define CONFIG_CMD_MII
118 #define CONFIG_CMD_PING
119 #define CONFIG_CMD_DHCP
120
121 /* This must be included AFTER the definition of CONFIG_COMMANDS (if any) */
122 #include <config_cmd_default.h>
123
124 /*
125 * Default Environment Varible definitions
126 */
127 #if defined(CONFIG_SPEAR_USBTTY)
128 #define CONFIG_BOOTDELAY -1
129 #else
130 #define CONFIG_BOOTDELAY 1
131 #endif
132
133 #define CONFIG_ENV_OVERWRITE
134
135 /*
136 * U-Boot Environment placing definitions.
137 */
138 #if defined(CONFIG_ENV_IS_IN_FLASH)
139 #ifdef CONFIG_ST_SMI
140 /*
141 * Environment is in serial NOR flash
142 */
143 #define CONFIG_SYS_MONITOR_LEN 0x00040000
144 #define CONFIG_ENV_SECT_SIZE 0x00010000
145 #define CONFIG_FSMTDBLK "/dev/mtdblock3 "
146
147 #define CONFIG_BOOTCOMMAND "bootm 0xf8050000"
148
149 #elif defined(CONFIG_SPEAR_EMI)
150 /*
151 * Environment is in parallel NOR flash
152 */
153 #define CONFIG_SYS_MONITOR_LEN 0x00060000
154 #define CONFIG_ENV_SECT_SIZE 0x00020000
155 #define CONFIG_FSMTDBLK "/dev/mtdblock3 "
156
157 #define CONFIG_BOOTCOMMAND "cp.b 0x50080000 0x1600000 " \
158 "0x4C0000; bootm 0x1600000"
159 #endif
160
161 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
162 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + \
163 CONFIG_SYS_MONITOR_LEN)
164 #elif defined(CONFIG_ENV_IS_IN_NAND)
165 /*
166 * Environment is in NAND
167 */
168
169 #define CONFIG_ENV_OFFSET 0x60000
170 #define CONFIG_ENV_RANGE 0x10000
171 #define CONFIG_FSMTDBLK "/dev/mtdblock7 "
172
173 #define CONFIG_BOOTCOMMAND "nand read.jffs2 0x1600000 " \
174 "0x80000 0x4C0000; " \
175 "bootm 0x1600000"
176 #endif
177
178 #define CONFIG_BOOTARGS "console=ttyAMA0,115200 " \
179 "mem=128M " \
180 "root="CONFIG_FSMTDBLK \
181 "rootfstype=jffs2"
182
183 #define CONFIG_NFSBOOTCOMMAND \
184 "bootp; " \
185 "setenv bootargs root=/dev/nfs rw " \
186 "nfsroot=$(serverip):$(rootpath) " \
187 "ip=$(ipaddr):$(serverip):$(gatewayip):" \
188 "$(netmask):$(hostname):$(netdev):off " \
189 "console=ttyAMA0,115200 $(othbootargs);" \
190 "bootm; "
191
192 #define CONFIG_RAMBOOTCOMMAND \
193 "setenv bootargs root=/dev/ram rw " \
194 "console=ttyAMA0,115200 $(othbootargs);" \
195 CONFIG_BOOTCOMMAND
196
197
198 #define CONFIG_ENV_SIZE 0x02000
199
200 /* Miscellaneous configurable options */
201 #define CONFIG_ARCH_CPU_INIT
202 #define CONFIG_BOARD_EARLY_INIT_F
203 #define CONFIG_DISPLAY_CPUINFO
204 #define CONFIG_BOOT_PARAMS_ADDR 0x00000100
205 #define CONFIG_CMDLINE_TAG 1
206 #define CONFIG_SETUP_MEMORY_TAGS 1
207 #define CONFIG_MISC_INIT_R 1
208 #define CONFIG_ZERO_BOOTDELAY_CHECK 1
209 #define CONFIG_AUTOBOOT_KEYED 1
210 #define CONFIG_AUTOBOOT_STOP_STR " "
211 #define CONFIG_AUTOBOOT_PROMPT \
212 "Hit SPACE in %d seconds to stop autoboot.\n", bootdelay
213
214 #define CONFIG_SYS_MEMTEST_START 0x00800000
215 #define CONFIG_SYS_MEMTEST_END 0x04000000
216 #define CONFIG_SYS_MALLOC_LEN (1024*1024)
217 #define CONFIG_IDENT_STRING "-SPEAr"
218 #define CONFIG_SYS_LONGHELP
219 #define CONFIG_SYS_PROMPT "u-boot> "
220 #define CONFIG_CMDLINE_EDITING
221 #define CONFIG_SYS_CBSIZE 256
222 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
223 sizeof(CONFIG_SYS_PROMPT) + 16)
224 #define CONFIG_SYS_MAXARGS 16
225 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
226 #define CONFIG_SYS_LOAD_ADDR 0x00800000
227 #define CONFIG_SYS_CONSOLE_INFO_QUIET 1
228
229 /* Stack sizes */
230 #define CONFIG_STACKSIZE (128*1024)
231
232 #ifdef CONFIG_USE_IRQ
233 #define CONFIG_STACKSIZE_IRQ (4*1024)
234 #define CONFIG_STACKSIZE_FIQ (4*1024)
235 #endif
236
237 /* Physical Memory Map */
238 #define CONFIG_NR_DRAM_BANKS 1
239 #define PHYS_SDRAM_1 0x00000000
240 #define PHYS_SDRAM_1_MAXSIZE 0x40000000
241
242 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
243 #define CONFIG_SYS_INIT_RAM_ADDR 0xD2800000
244 #define CONFIG_SYS_INIT_RAM_SIZE 0x2000
245
246 #define CONFIG_SYS_INIT_SP_OFFSET \
247 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
248
249 #define CONFIG_SYS_INIT_SP_ADDR \
250 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
251
252 #endif