include/configs/stxgp3.h

   1 /*
   2  * (C) Copyright 2003 Embedded Edge, LLC
   3  * Dan Malek <dan@embeddededge.com>
   4  * Copied from ADS85xx.
   5  * Updates for Silicon Tx GP3 8560 board.
   6  *
   7  * (C) Copyright 2002,2003 Motorola,Inc.
   8  * Xianghua Xiao <X.Xiao@motorola.com>
   9  *
  10  * See file CREDITS for list of people who contributed to this
  11  * project.
  12  *
  13  * This program is free software; you can redistribute it and/or
  14  * modify it under the terms of the GNU General Public License as
  15  * published by the Free Software Foundation; either version 2 of
  16  * the License, or (at your option) any later version.
  17  *
  18  * This program is distributed in the hope that it will be useful,
  19  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  20  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  21  * GNU General Public License for more details.
  22  *
  23  * You should have received a copy of the GNU General Public License
  24  * along with this program; if not, write to the Free Software
  25  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  26  * MA 02111-1307 USA
  27  */
  28
  29 /* mpc8560ads board configuration file */
  30 /* please refer to doc/README.mpc85xx for more info */
  31 /* make sure you change the MAC address and other network params first,
  32  * search for CONFIG_ETHADDR,CONFIG_SERVERIP,etc in this file
  33  */
  34
  35 #ifndef __CONFIG_H
  36 #define __CONFIG_H
  37
  38 /* High Level Configuration Options */
  39 #define CONFIG_BOOKE            1       /* BOOKE                */
  40 #define CONFIG_E500             1       /* BOOKE e500 family    */
  41 #define CONFIG_MPC85xx          1       /* MPC8540/MPC8560      */
  42 #define CONFIG_CPM2             1       /* has CPM2 */
  43 #define CONFIG_STXGP3           1       /* Silicon Tx GPPP board specific*/
  44 #define CONFIG_MPC8560          1
  45
  46 #define CONFIG_SYS_TEXT_BASE    0xfff80000
  47
  48 #undef  CONFIG_PCI                      /* pci ethernet support */
  49 #define CONFIG_TSEC_ENET                /* tsec ethernet support*/
  50 #undef  CONFIG_ETHER_ON_FCC             /* cpm FCC ethernet support */
  51 #define CONFIG_ENV_OVERWRITE
  52
  53 #define CONFIG_FSL_LAW          1       /* Use common FSL init code */
  54
  55 /* sysclk for MPC85xx
  56  */
  57
  58 #define CONFIG_SYS_CLK_FREQ     33333333 /* most pci cards are 33Mhz */
  59
  60 /* Blinkin' LEDs for Robert :-)
  61 */
  62 #define CONFIG_SHOW_ACTIVITY 1
  63
  64 /*
  65  * These can be toggled for performance analysis, otherwise use default.
  66  */
  67 #define CONFIG_L2_CACHE                     /* toggle L2 cache         */
  68 #define  CONFIG_BTB                          /* toggle branch predition */
  69
  70 #define CONFIG_BOARD_EARLY_INIT_F   1        /* Call board_pre_init      */
  71 #define CONFIG_RESET_PHY_R      1       /* Call reset_phy()             */
  72
  73 #undef  CONFIG_SYS_DRAM_TEST                       /* memory test, takes time  */
  74 #define CONFIG_SYS_MEMTEST_START       0x00200000  /* memtest region */
  75 #define CONFIG_SYS_MEMTEST_END         0x00400000
  76
  77
  78 /* Localbus SDRAM is an option, not all boards have it.
  79  * This address, however, is used to configure a 256M local bus
  80  * window that includes the Config latch below.
  81  */
  82 #define CONFIG_SYS_LBC_SDRAM_BASE      0xf0000000      /* Localbus SDRAM */
  83 #define CONFIG_SYS_LBC_SDRAM_SIZE       256             /* LBC SDRAM is 64MB    */
  84
  85 #define CONFIG_SYS_FLASH_BASE        0xff000000      /* start of FLASH 16M    */
  86 #define CONFIG_SYS_BR0_PRELIM        0xff001801      /* port size 32bit      */
  87
  88 #define CONFIG_SYS_OR0_PRELIM          0xff000ff7      /* 16 MB Flash           */
  89 #define CONFIG_SYS_MAX_FLASH_BANKS      1               /* number of banks      */
  90 #define CONFIG_SYS_MAX_FLASH_SECT       136             /* sectors per device   */
  91 #undef  CONFIG_SYS_FLASH_CHECKSUM
  92 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Timeout for Flash Erase (in ms)      */
  93 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Timeout for Flash Write (in ms)      */
  94
  95 /* The configuration latch is Chip Select 1.
  96  * It's an 8-bit latch in the lower 8 bits of the word.
  97  */
  98 #define CONFIG_SYS_BR1_PRELIM           0xfc001801      /* 32-bit port */
  99 #define CONFIG_SYS_OR1_PRELIM           0xffff0ff7      /* 64K is enough */
 100 #define CONFIG_SYS_LBC_LCLDEVS_BASE     0xfc000000      /* Base of localbus devices */
 101
 102 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor     */
 103
 104 #if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
 105 #define CONFIG_SYS_RAMBOOT
 106 #else
 107 #undef  CONFIG_SYS_RAMBOOT
 108 #endif
 109
 110 #ifdef CONFIG_SYS_RAMBOOT
 111 #define CONFIG_SYS_CCSRBAR_DEFAULT      0x40000000      /* CCSRBAR by BDI cfg   */
 112 #else
 113 #define CONFIG_SYS_CCSRBAR_DEFAULT      0xff700000      /* CCSRBAR Default      */
 114 #endif
 115 #define CONFIG_SYS_CCSRBAR             0xfdf00000      /* relocated CCSRBAR    */
 116 #define CONFIG_SYS_CCSRBAR_PHYS CONFIG_SYS_CCSRBAR      /* physical addr of CCSRBAR */
 117 #define CONFIG_SYS_IMMR         CONFIG_SYS_CCSRBAR      /* PQII uses CONFIG_SYS_IMMR    */
 118
 119 /* DDR Setup */
 120 #define CONFIG_FSL_DDR1
 121 #define CONFIG_SPD_EEPROM               /* Use SPD EEPROM for DDR setup*/
 122 #define CONFIG_DDR_SPD
 123 #undef CONFIG_FSL_DDR_INTERACTIVE
 124
 125 #undef  CONFIG_DDR_ECC                  /* only for ECC DDR module */
 126 #define CONFIG_SYS_FSL_ERRATUM_DDR_MSYNC_IN     /* possible DLL fix needed */
 127 #define CONFIG_DDR_2T_TIMING            /* Sets the 2T timing bit */
 128
 129 #define CONFIG_MEM_INIT_VALUE           0xDeadBeef
 130
 131 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000      /* DDR is system memory*/
 132 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 133
 134 #define CONFIG_NUM_DDR_CONTROLLERS      1
 135 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
 136 #define CONFIG_CHIP_SELECTS_PER_CTRL    (2 * CONFIG_DIMM_SLOTS_PER_CTLR)
 137
 138 /* I2C addresses of SPD EEPROMs */
 139 #define SPD_EEPROM_ADDRESS      0x54    /* CTLR 0 DIMM 0 */
 140
 141 #undef CONFIG_CLOCKS_IN_MHZ
 142
 143 /* local bus definitions */
 144 #define CONFIG_SYS_BR2_PRELIM           0xf8001861      /* 64MB localbus SDRAM  */
 145 #define CONFIG_SYS_OR2_PRELIM           0xfc006901
 146 #define CONFIG_SYS_LBC_LCRR             0x00030004      /* local bus freq       */
 147 #define CONFIG_SYS_LBC_LBCR             0x00000000
 148 #define CONFIG_SYS_LBC_LSRT             0x20000000
 149 #define CONFIG_SYS_LBC_MRTPR            0x20000000
 150 #define CONFIG_SYS_LBC_LSDMR_1          0x2861b723
 151 #define CONFIG_SYS_LBC_LSDMR_2          0x0861b723
 152 #define CONFIG_SYS_LBC_LSDMR_3          0x0861b723
 153 #define CONFIG_SYS_LBC_LSDMR_4          0x1861b723
 154 #define CONFIG_SYS_LBC_LSDMR_5          0x4061b723
 155
 156 #define CONFIG_SYS_INIT_RAM_LOCK        1
 157 #define CONFIG_SYS_INIT_RAM_ADDR       0x60000000      /* Initial RAM address  */
 158 #define CONFIG_SYS_INIT_RAM_SIZE        0x4000          /* Size of used area in RAM */
 159
 160 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 161 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 162
 163 #define CONFIG_SYS_MONITOR_LEN          (256 * 1024)    /* Reserve 256 kB for Mon */
 164 #define CONFIG_SYS_MALLOC_LEN           (128 * 1024)    /* Reserved for malloc */
 165
 166 /* Serial Port */
 167 #define CONFIG_CONS_ON_SCC              /* define if console on SCC */
 168 #undef  CONFIG_CONS_NONE                /* define if console on something else */
 169 #define CONFIG_CONS_INDEX       2       /* which serial channel for console */
 170
 171 #define CONFIG_BAUDRATE         38400
 172
 173 #define CONFIG_SYS_BAUDRATE_TABLE  \
 174         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200}
 175
 176 /* Use the HUSH parser */
 177 #define CONFIG_SYS_HUSH_PARSER
 178 #ifdef  CONFIG_SYS_HUSH_PARSER
 179 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
 180 #endif
 181
 182 /*
 183  * I2C
 184  */
 185 #define CONFIG_FSL_I2C          /* Use FSL common I2C driver */
 186 #define CONFIG_HARD_I2C         /* I2C with hardware support*/
 187 #undef  CONFIG_SOFT_I2C                 /* I2C bit-banged */
 188 #define CONFIG_SYS_I2C_SPEED            400000  /* I2C speed and slave address  */
 189 #define CONFIG_SYS_I2C_SLAVE            0x7F
 190 #if 0
 191 #define CONFIG_SYS_I2C_NOPROBES        {0x00}  /* Don't probe these addrs */
 192 #else
 193 /* I did the 'if 0' so we could keep the syntax above if ever needed. */
 194 #undef CONFIG_SYS_I2C_NOPROBES
 195 #endif
 196 #define CONFIG_SYS_I2C_OFFSET           0x3000
 197
 198 /* RapdIO Map configuration, mapped 1:1.
 199 */
 200 #define CONFIG_SYS_RIO_MEM_BASE 0xc0000000
 201 #define CONFIG_SYS_RIO_MEM_PHYS CONFIG_SYS_RIO_MEM_BASE
 202 #define CONFIG_SYS_RIO_MEM_SIZE 0x200000000     /* 512 M */
 203
 204 /* Standard 8560 PCI addressing, mapped 1:1.
 205 */
 206 #define CONFIG_SYS_PCI1_MEM_BASE        0x80000000
 207 #define CONFIG_SYS_PCI1_MEM_PHYS        CONFIG_SYS_PCI1_MEM_BASE
 208 #define CONFIG_SYS_PCI1_MEM_SIZE        0x20000000      /* 512M */
 209 #define CONFIG_SYS_PCI1_IO_BASE 0xe2000000
 210 #define CONFIG_SYS_PCI1_IO_PHYS CONFIG_SYS_PCI1_IO_BASE
 211 #define CONFIG_SYS_PCI1_IO_SIZE 0x01000000      /* 16 M */
 212
 213 #if defined(CONFIG_PCI)                 /* PCI Ethernet card */
 214
 215 #define CONFIG_NET_MULTI
 216 #define CONFIG_PCI_PNP                  /* do pci plug-and-play */
 217
 218 #undef CONFIG_EEPRO100
 219 #undef CONFIG_TULIP
 220
 221 #if !defined(CONFIG_PCI_PNP)
 222   #define PCI_ENET0_IOADDR      0xe0000000
 223   #define PCI_ENET0_MEMADDR     0xe0000000
 224   #define PCI_IDSEL_NUMBER      0x0c    /* slot0->3(IDSEL)=12->15 */
 225 #endif
 226
 227 #undef CONFIG_PCI_SCAN_SHOW
 228 #define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1057  /* Motorola */
 229
 230 #endif /* CONFIG_PCI */
 231
 232 #if defined(CONFIG_TSEC_ENET)
 233
 234 #ifndef CONFIG_NET_MULTI
 235 #define CONFIG_NET_MULTI        1
 236 #endif
 237
 238 #define CONFIG_MII              1       /* MII PHY management           */
 239
 240 #define CONFIG_TSEC1    1
 241 #define CONFIG_TSEC1_NAME       "TSEC0"
 242 #define CONFIG_TSEC2    1
 243 #define CONFIG_TSEC2_NAME       "TSEC1"
 244
 245 #define TSEC1_PHY_ADDR          2
 246 #define TSEC2_PHY_ADDR          4
 247 #define TSEC1_PHYIDX            0
 248 #define TSEC2_PHYIDX            0
 249 #define TSEC1_FLAGS             TSEC_GIGABIT
 250 #define TSEC2_FLAGS             TSEC_GIGABIT
 251 #define CONFIG_ETHPRIME         "TSEC0"
 252
 253 #elif defined(CONFIG_ETHER_ON_FCC)      /* CPM FCC Ethernet */
 254
 255 #define CONFIG_ETHER_ON_FCC2             /* define if ether on FCC   */
 256 #undef  CONFIG_ETHER_NONE               /* define if ether on something else */
 257 #define CONFIG_ETHER_INDEX      2       /* which channel for ether  */
 258
 259 #if (CONFIG_ETHER_INDEX == 2)
 260   /*
 261    * - Rx-CLK is CLK13
 262    * - Tx-CLK is CLK14
 263    * - Select bus for bd/buffers
 264    * - Full duplex
 265    */
 266   #define CONFIG_SYS_CMXFCR_MASK       (CMXFCR_FC2 | CMXFCR_RF2CS_MSK | CMXFCR_TF2CS_MSK)
 267   #define CONFIG_SYS_CMXFCR_VALUE      (CMXFCR_RF2CS_CLK13 | CMXFCR_TF2CS_CLK14)
 268   #define CONFIG_SYS_CPMFCR_RAMTYPE    0
 269 #if 0
 270   #define CONFIG_SYS_FCC_PSMR          (FCC_PSMR_FDE)
 271 #else
 272   #define CONFIG_SYS_FCC_PSMR          0
 273 #endif
 274   #define FETH2_RST             0x01
 275 #elif (CONFIG_ETHER_INDEX == 3)
 276   /* need more definitions here for FE3 */
 277   #define FETH3_RST             0x80
 278 #endif  /* CONFIG_ETHER_INDEX */
 279
 280 /* MDIO is done through the TSEC0 control.
 281 */
 282 #define CONFIG_MII                      /* MII PHY management */
 283 #undef CONFIG_BITBANGMII                /* bit-bang MII PHY management  */
 284
 285 #endif
 286
 287 /* Environment */
 288 /* We use the top boot sector flash, so we have some 16K sectors for env
 289  */
 290 #ifndef CONFIG_SYS_RAMBOOT
 291   #define CONFIG_ENV_IS_IN_FLASH        1
 292   #define CONFIG_ENV_ADDR               (CONFIG_SYS_MONITOR_BASE + 0x60000)
 293   #define CONFIG_ENV_SECT_SIZE  0x4000  /* 16K (one top sector) for env */
 294   #define CONFIG_ENV_SIZE               0x2000
 295 #else
 296   #define CONFIG_SYS_NO_FLASH           1       /* Flash is not usable now      */
 297   #define CONFIG_ENV_IS_NOWHERE 1       /* Store ENV in memory only     */
 298   #define CONFIG_ENV_ADDR               (CONFIG_SYS_MONITOR_BASE - 0x1000)
 299   #define CONFIG_ENV_SIZE               0x2000
 300 #endif
 301
 302 #define CONFIG_BOOTARGS "root=/dev/nfs rw ip=any console=ttyS1,38400"
 303 #define CONFIG_BOOTCOMMAND      "bootm 0xff000000 0xff100000"
 304 #define CONFIG_BOOTDELAY        3       /* -1 disable autoboot */
 305
 306 #define CONFIG_LOADS_ECHO       1       /* echo on for serial download  */
 307 #define CONFIG_SYS_LOADS_BAUD_CHANGE    1       /* allow baudrate change        */
 308
 309 /*
 310  * BOOTP options
 311  */
 312 #define CONFIG_BOOTP_BOOTFILESIZE
 313 #define CONFIG_BOOTP_BOOTPATH
 314 #define CONFIG_BOOTP_GATEWAY
 315 #define CONFIG_BOOTP_HOSTNAME
 316
 317
 318 /*
 319  * Command line configuration.
 320  */
 321 #include <config_cmd_default.h>
 322
 323 #define CONFIG_CMD_PING
 324 #define CONFIG_CMD_I2C
 325 #define CONFIG_CMD_REGINFO
 326
 327 #if defined(CONFIG_SYS_RAMBOOT)
 328     #undef CONFIG_CMD_SAVEENV
 329     #undef CONFIG_CMD_LOADS
 330 #else
 331     #define CONFIG_CMD_ELF
 332 #endif
 333
 334 #if defined(CONFIG_PCI)
 335     #define CONFIG_CMD_PCI
 336 #endif
 337
 338 #if defined(CONFIG_TSEC_ENET) || defined(CONFIG_ETHER_ON_FCC)
 339     #define CONFIG_CMD_MII
 340 #endif
 341
 342
 343 #undef CONFIG_WATCHDOG                  /* watchdog disabled            */
 344
 345 /*
 346  * Miscellaneous configurable options
 347  */
 348 #define CONFIG_SYS_LONGHELP                     /* undef to save memory         */
 349 #define CONFIG_SYS_PROMPT       "GPPP=> "       /* Monitor Command Prompt       */
 350 #if defined(CONFIG_CMD_KGDB)
 351 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O Buffer Size      */
 352 #else
 353 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size      */
 354 #endif
 355 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
 356 #define CONFIG_SYS_MAXARGS      16              /* max number of command args   */
 357 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE       /* Boot Argument Buffer Size    */
 358 #define CONFIG_SYS_LOAD_ADDR    0x1000000       /* default load address */
 359 #define CONFIG_SYS_HZ           1000            /* decrementer freq: 1 ms ticks */
 360
 361 /*
 362  * For booting Linux, the board info and command line data
 363  * have to be in the first 8 MB of memory, since this is
 364  * the maximum mapped by the Linux kernel during initialization.
 365  */
 366 #define CONFIG_SYS_BOOTMAPSZ            (8 << 20) /* Initial Memory map for Linux */
 367
 368 #if defined(CONFIG_CMD_KGDB)
 369 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 370 #define CONFIG_KGDB_SER_INDEX   2       /* which serial port to use */
 371 #endif
 372
 373 /*Note: change below for your network setting!!! */
 374 #if defined(CONFIG_TSEC_ENET) || defined(CONFIG_ETHER_ON_FCC)
 375 #define CONFIG_HAS_ETH0
 376 #define CONFIG_ETHADDR           00:e0:0c:07:9b:8a
 377 #define CONFIG_HAS_ETH1
 378 #define CONFIG_ETH1ADDR          00:e0:0c:07:9b:8b
 379 #define CONFIG_HAS_ETH2
 380 #define CONFIG_ETH2ADDR          00:e0:0c:07:9b:8c
 381 #endif
 382
 383 #define CONFIG_SERVERIP         192.168.85.1
 384 #define CONFIG_IPADDR           192.168.85.60
 385 #define CONFIG_GATEWAYIP        192.168.85.1
 386 #define CONFIG_NETMASK          255.255.255.0
 387 #define CONFIG_HOSTNAME         STX_GP3
 388 #define CONFIG_ROOTPATH         /gppproot
 389 #define CONFIG_BOOTFILE         uImage
 390 #define CONFIG_LOADADDR         0x1000000
 391
 392 #endif  /* __CONFIG_H */