include/configs/stxssa.h

   1 /*
   2  * (C) Copyright 2005 Embedded Alley Solutions, Inc.
   3  * Dan Malek <dan@embeddedalley.com>
   4  * Copied from STx GP3.
   5  * Updates for Silicon Tx GP3 SSA board.
   6  *
   7  * (C) Copyright 2002,2003 Motorola,Inc.
   8  * Xianghua Xiao <X.Xiao@motorola.com>
   9  *
  10  * See file CREDITS for list of people who contributed to this
  11  * project.
  12  *
  13  * This program is free software; you can redistribute it and/or
  14  * modify it under the terms of the GNU General Public License as
  15  * published by the Free Software Foundation; either version 2 of
  16  * the License, or (at your option) any later version.
  17  *
  18  * This program is distributed in the hope that it will be useful,
  19  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  20  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  21  * GNU General Public License for more details.
  22  *
  23  * You should have received a copy of the GNU General Public License
  24  * along with this program; if not, write to the Free Software
  25  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  26  * MA 02111-1307 USA
  27  */
  28
  29 /* mpc8560ads board configuration file */
  30 /* please refer to doc/README.mpc85xx for more info */
  31 /* make sure you change the MAC address and other network params first,
  32  * search for CONFIG_ETHADDR,CONFIG_SERVERIP,etc in this file
  33  */
  34
  35 #ifndef __CONFIG_H
  36 #define __CONFIG_H
  37
  38 /* High Level Configuration Options */
  39 #define CONFIG_BOOKE            1       /* BOOKE                */
  40 #define CONFIG_E500             1       /* BOOKE e500 family    */
  41 #define CONFIG_MPC85xx          1       /* MPC8540/MPC8560      */
  42 #define CONFIG_CPM2             1       /* has CPM2 */
  43 #define CONFIG_STXSSA           1       /* Silicon Tx GPPP SSA board specific*/
  44 #define CONFIG_MPC8560          1
  45
  46 #define CONFIG_PCI                      /* PCI ethernet support */
  47 #define CONFIG_TSEC_ENET                /* tsec ethernet support*/
  48 #undef CONFIG_ETHER_ON_FCC              /* cpm FCC ethernet support */
  49 #define CONFIG_ENV_OVERWRITE
  50
  51 #define CONFIG_FSL_LAW          1       /* Use common FSL init code */
  52
  53 /* sysclk for MPC85xx
  54  */
  55
  56 #define CONFIG_SYS_CLK_FREQ     33000000 /* most pci cards are 33Mhz */
  57
  58 /* Blinkin' LEDs for Robert :-)
  59 */
  60 #define CONFIG_SHOW_ACTIVITY 1
  61
  62 /*
  63  * These can be toggled for performance analysis, otherwise use default.
  64  */
  65 #define CONFIG_L2_CACHE                         /* toggle L2 cache             */
  66 #define  CONFIG_BTB                             /* toggle branch predition */
  67
  68 #define CONFIG_BOARD_EARLY_INIT_F   1           /* Call board_pre_init   */
  69
  70 #undef  CONFIG_SYS_DRAM_TEST                            /* memory test, takes time      */
  71 #define CONFIG_SYS_MEMTEST_START        0x00200000      /* memtest region */
  72 #define CONFIG_SYS_MEMTEST_END          0x00400000
  73
  74
  75 /* Localbus connector.  There are many options that can be
  76  * connected here, including sdram or lots of flash.
  77  * This address, however, is used to configure a 256M local bus
  78  * window that includes the Config latch below.
  79  */
  80 #define CONFIG_SYS_LBC_OPTION_BASE      0xF0000000      /* Localbus Extension */
  81 #define CONFIG_SYS_LBC_OPTION_SIZE      256             /* 256MB */
  82
  83 /* There are various flash options used, we configure for the largest,
  84  * which is 64Mbytes.  The CFI works fine and will discover the proper
  85  * sizes.
  86  */
  87 #ifdef CONFIG_STXSSA_4M
  88 #define CONFIG_SYS_FLASH_BASE           0xFFC00000      /* start of  4 MiB flash */
  89 #else
  90 #define CONFIG_SYS_FLASH_BASE           0xFC000000      /* start of 64 MiB flash */
  91 #endif
  92 #define CONFIG_SYS_BR0_PRELIM   (CONFIG_SYS_FLASH_BASE | 0x1801) /* port size 32bit      */
  93 #define CONFIG_SYS_OR0_PRELIM   (CONFIG_SYS_FLASH_BASE | 0x0FF7)
  94
  95 #define CONFIG_SYS_FLASH_CFI            1
  96 #define CONFIG_FLASH_CFI_DRIVER 1
  97 #undef CONFIG_SYS_FLASH_USE_BUFFER_WRITE        /* use buffered writes (20x faster) */
  98 #define CONFIG_SYS_MAX_FLASH_SECT       256     /* max number of sectors on one chip */
  99 #define CONFIG_SYS_MAX_FLASH_BANKS      1       /* max number of memory banks   */
 100
 101 #define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE }
 102
 103 #define CONFIG_SYS_FLASH_PROTECTION
 104
 105 /* The configuration latch is Chip Select 1.
 106  * It's an 8-bit latch in the lower 8 bits of the word.
 107  */
 108 #define CONFIG_SYS_LBC_CFGLATCH_BASE    0xFB000000      /* Base of config latch */
 109 #define CONFIG_SYS_BR1_PRELIM           0xFB001801      /* 32-bit port */
 110 #define CONFIG_SYS_OR1_PRELIM           0xFFFF0FF7      /* 64K is enough */
 111
 112 #define CONFIG_SYS_MONITOR_BASE TEXT_BASE       /* start of monitor     */
 113
 114 #if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
 115 #define CONFIG_SYS_RAMBOOT
 116 #else
 117 #undef  CONFIG_SYS_RAMBOOT
 118 #endif
 119
 120 #ifdef CONFIG_SYS_RAMBOOT
 121 #define CONFIG_SYS_CCSRBAR_DEFAULT      0x40000000      /* CCSRBAR by BDI cfg   */
 122 #else
 123 #define CONFIG_SYS_CCSRBAR_DEFAULT      0xff700000      /* CCSRBAR Default      */
 124 #endif
 125 #define CONFIG_SYS_CCSRBAR              0xe0000000      /* relocated CCSRBAR    */
 126 #define CONFIG_SYS_CCSRBAR_PHYS CONFIG_SYS_CCSRBAR      /* physical addr of CCSRBAR */
 127 #define CONFIG_SYS_IMMR         CONFIG_SYS_CCSRBAR      /* PQII uses CONFIG_SYS_IMMR    */
 128
 129 /* DDR Setup */
 130 #define CONFIG_FSL_DDR1
 131 #define CONFIG_SPD_EEPROM               /* Use SPD EEPROM for DDR setup*/
 132 #define CONFIG_DDR_SPD
 133 #undef CONFIG_FSL_DDR_INTERACTIVE
 134
 135 #undef  CONFIG_DDR_ECC                  /* only for ECC DDR module */
 136 #undef CONFIG_DDR_DLL                   /* possible DLL fix needed */
 137 #define CONFIG_DDR_2T_TIMING            /* Sets the 2T timing bit */
 138
 139 #define CONFIG_MEM_INIT_VALUE           0xDeadBeef
 140
 141 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000      /* DDR is system memory*/
 142 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 143
 144 #define CONFIG_NUM_DDR_CONTROLLERS      1
 145 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
 146 #define CONFIG_CHIP_SELECTS_PER_CTRL    (2 * CONFIG_DIMM_SLOTS_PER_CTLR)
 147
 148 /* I2C addresses of SPD EEPROMs */
 149 #define SPD_EEPROM_ADDRESS      0x54    /* CTLR 0 DIMM 0 */
 150
 151 #undef CONFIG_CLOCKS_IN_MHZ
 152
 153 /* local bus definitions */
 154 #define CONFIG_SYS_BR2_PRELIM           0xf8001861      /* 64MB localbus SDRAM  */
 155 #define CONFIG_SYS_OR2_PRELIM           0xfc006901
 156 #define CONFIG_SYS_LBC_LCRR             0x00030004      /* local bus freq       */
 157 #define CONFIG_SYS_LBC_LBCR             0x00000000
 158 #define CONFIG_SYS_LBC_LSRT             0x20000000
 159 #define CONFIG_SYS_LBC_MRTPR            0x20000000
 160 #define CONFIG_SYS_LBC_LSDMR_1          0x2861b723
 161 #define CONFIG_SYS_LBC_LSDMR_2          0x0861b723
 162 #define CONFIG_SYS_LBC_LSDMR_3          0x0861b723
 163 #define CONFIG_SYS_LBC_LSDMR_4          0x1861b723
 164 #define CONFIG_SYS_LBC_LSDMR_5          0x4061b723
 165
 166 #define CONFIG_SYS_INIT_RAM_LOCK        1
 167 #define CONFIG_SYS_INIT_RAM_ADDR        0x60000000      /* Initial RAM address  */
 168 #define CONFIG_SYS_INIT_RAM_END 0x4000          /* End of used area in RAM */
 169
 170 #define CONFIG_SYS_GBL_DATA_SIZE        128             /* num bytes initial data */
 171 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
 172 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 173
 174 #define CONFIG_SYS_MONITOR_LEN          (256 * 1024)    /* Reserve 256 kB for Mon */
 175 #define CONFIG_SYS_MALLOC_LEN           (512 * 1024)    /* Reserved for malloc */
 176
 177 /* Serial Port */
 178 #define CONFIG_CONS_INDEX     2
 179 #undef  CONFIG_SERIAL_SOFTWARE_FIFO
 180 #define CONFIG_SYS_NS16550
 181 #define CONFIG_SYS_NS16550_SERIAL
 182 #define CONFIG_SYS_NS16550_REG_SIZE     1
 183 #define CONFIG_SYS_NS16550_CLK          get_bus_freq(0)
 184
 185 #define CONFIG_SYS_BAUDRATE_TABLE  \
 186         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200}
 187
 188 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500)
 189 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600)
 190
 191 #define CONFIG_CMDLINE_EDITING  1       /* add command line history     */
 192 #define CONFIG_AUTO_COMPLETE    1       /* add autocompletion support   */
 193 #define CONFIG_SYS_HUSH_PARSER          1       /* Use the HUSH parser          */
 194 #ifdef  CONFIG_SYS_HUSH_PARSER
 195 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
 196 #endif
 197
 198 /*
 199  * I2C
 200  */
 201 #define CONFIG_FSL_I2C                  /* Use FSL common I2C driver */
 202 #define  CONFIG_HARD_I2C                /* I2C with hardware support*/
 203 #undef  CONFIG_SOFT_I2C                 /* I2C bit-banged */
 204 #define CONFIG_SYS_I2C_SPEED            400000  /* I2C speed and slave address  */
 205 #define CONFIG_SYS_I2C_SLAVE            0x7F
 206 #undef CONFIG_SYS_I2C_NOPROBES
 207 #define CONFIG_SYS_I2C_OFFSET           0x3000
 208
 209 /* I2C RTC */
 210 #define CONFIG_RTC_DS1337               /* This is really a DS1339 RTC  */
 211 #define CONFIG_SYS_I2C_RTC_ADDR 0x68    /* at address 0x68              */
 212
 213 /* I2C EEPROM.  AT24C32, we keep our environment in here.
 214 */
 215 #define CONFIG_SYS_I2C_EEPROM_ADDR              0x51    /* 1010001x             */
 216 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN          2
 217 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS       5       /* =32 Bytes per write  */
 218 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS   20
 219
 220 /*
 221  * Standard 8555 PCI mapping.
 222  * Addresses are mapped 1-1.
 223  */
 224 #define CONFIG_SYS_PCI1_MEM_BASE        0x80000000
 225 #define CONFIG_SYS_PCI1_MEM_PHYS        CONFIG_SYS_PCI1_MEM_BASE
 226 #define CONFIG_SYS_PCI1_MEM_SIZE        0x20000000      /* 512M */
 227 #define CONFIG_SYS_PCI1_IO_BASE 0x00000000
 228 #define CONFIG_SYS_PCI1_IO_PHYS 0xe2000000
 229 #define CONFIG_SYS_PCI1_IO_SIZE 0x01000000      /* 16M */
 230
 231 #define CONFIG_SYS_PCI2_MEM_BASE        0xa0000000
 232 #define CONFIG_SYS_PCI2_MEM_PHYS        CONFIG_SYS_PCI2_MEM_BASE
 233 #define CONFIG_SYS_PCI2_MEM_SIZE        0x20000000      /* 512M */
 234 #define CONFIG_SYS_PCI2_IO_BASE 0x00000000
 235 #define CONFIG_SYS_PCI2_IO_PHYS 0xe3000000
 236 #define CONFIG_SYS_PCI2_IO_SIZE 0x01000000      /* 16M */
 237
 238 #if defined(CONFIG_PCI)                 /* PCI Ethernet card */
 239 #define CONFIG_MPC85XX_PCI2     1
 240 #define CONFIG_NET_MULTI
 241 #define CONFIG_PCI_PNP                  /* do pci plug-and-play */
 242
 243 #define CONFIG_EEPRO100
 244 #define CONFIG_TULIP
 245
 246 #if !defined(CONFIG_PCI_PNP)
 247   #define PCI_ENET0_IOADDR      0xe0000000
 248   #define PCI_ENET0_MEMADDR     0xe0000000
 249   #define PCI_IDSEL_NUMBER      0x0c    /* slot0->3(IDSEL)=12->15 */
 250 #endif
 251
 252 #define CONFIG_PCI_SCAN_SHOW
 253 #define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1057   /* Motorola */
 254
 255 #endif /* CONFIG_PCI */
 256
 257 #if defined(CONFIG_TSEC_ENET)
 258
 259 #ifndef CONFIG_NET_MULTI
 260 #define CONFIG_NET_MULTI        1
 261 #endif
 262
 263 #define CONFIG_MII              1       /* MII PHY management           */
 264
 265 #define CONFIG_TSEC1    1
 266 #define CONFIG_TSEC1_NAME       "TSEC0"
 267 #define CONFIG_TSEC2    1
 268 #define CONFIG_TSEC2_NAME       "TSEC1"
 269
 270 #define TSEC1_PHY_ADDR          2
 271 #define TSEC2_PHY_ADDR          4
 272 #define TSEC1_PHYIDX            0
 273 #define TSEC2_PHYIDX            0
 274 #define TSEC1_FLAGS             TSEC_GIGABIT
 275 #define TSEC2_FLAGS             TSEC_GIGABIT
 276 #define CONFIG_ETHPRIME         "TSEC0"
 277
 278 #elif defined(CONFIG_ETHER_ON_FCC)      /* CPM FCC Ethernet */
 279
 280 #define CONFIG_ETHER_ON_FCC2            /* define if ether on FCC   */
 281 #undef  CONFIG_ETHER_NONE               /* define if ether on something else */
 282 #define CONFIG_ETHER_INDEX      2       /* which channel for ether  */
 283
 284 #if (CONFIG_ETHER_INDEX == 2)
 285   /*
 286    * - Rx-CLK is CLK13
 287    * - Tx-CLK is CLK14
 288    * - Select bus for bd/buffers
 289    * - Full duplex
 290    */
 291   #define CONFIG_SYS_CMXFCR_MASK        (CMXFCR_FC2 | CMXFCR_RF2CS_MSK | CMXFCR_TF2CS_MSK)
 292   #define CONFIG_SYS_CMXFCR_VALUE       (CMXFCR_RF2CS_CLK13 | CMXFCR_TF2CS_CLK14)
 293   #define CONFIG_SYS_CPMFCR_RAMTYPE     0
 294 #if 0
 295   #define CONFIG_SYS_FCC_PSMR           (FCC_PSMR_FDE)
 296 #else
 297   #define CONFIG_SYS_FCC_PSMR           0
 298 #endif
 299   #define FETH2_RST             0x01
 300 #elif (CONFIG_ETHER_INDEX == 3)
 301   /* need more definitions here for FE3 */
 302   #define FETH3_RST             0x80
 303 #endif                                  /* CONFIG_ETHER_INDEX */
 304
 305 /* MDIO is done through the TSEC0 control.
 306 */
 307 #define CONFIG_MII                      /* MII PHY management */
 308 #undef CONFIG_BITBANGMII                /* bit-bang MII PHY management  */
 309
 310 #endif
 311
 312 /* Environment - default config is in flash, see below */
 313 #if 0   /* in EEPROM */
 314 # define CONFIG_ENV_IS_IN_EEPROM        1
 315 # define CONFIG_ENV_OFFSET              0
 316 # define CONFIG_ENV_SIZE                2048
 317 #else   /* in flash */
 318 # define CONFIG_ENV_IS_IN_FLASH 1
 319 # ifdef CONFIG_STXSSA_4M
 320 #  define CONFIG_ENV_SECT_SIZE  0x20000
 321 # else  /* default configuration - 64 MiB flash */
 322 #  define CONFIG_ENV_SECT_SIZE  0x40000
 323 # endif
 324 # define CONFIG_ENV_ADDR                (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 325 # define CONFIG_ENV_SIZE                0x4000
 326 # define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR - CONFIG_ENV_SECT_SIZE)
 327 # define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE)
 328 #endif
 329
 330 #define CONFIG_LOADS_ECHO       1       /* echo on for serial download  */
 331 #define CONFIG_SYS_LOADS_BAUD_CHANGE    1       /* allow baudrate change        */
 332
 333 #define CONFIG_TIMESTAMP                /* Print image info with ts     */
 334
 335
 336 /*
 337  * BOOTP options
 338  */
 339 #define CONFIG_BOOTP_BOOTFILESIZE
 340 #define CONFIG_BOOTP_BOOTPATH
 341 #define CONFIG_BOOTP_GATEWAY
 342 #define CONFIG_BOOTP_HOSTNAME
 343
 344
 345 /*
 346  * Command line configuration.
 347  */
 348 #include <config_cmd_default.h>
 349
 350 #define CONFIG_CMD_DATE
 351 #define CONFIG_CMD_DHCP
 352 #define CONFIG_CMD_EEPROM
 353 #define CONFIG_CMD_I2C
 354 #define CONFIG_CMD_NFS
 355 #define CONFIG_CMD_PING
 356 #define CONFIG_CMD_SNTP
 357 #define CONFIG_CMD_REGINFO
 358
 359 #if defined(CONFIG_PCI)
 360     #define CONFIG_CMD_PCI
 361 #endif
 362
 363 #if defined(CONFIG_TSEC_ENET) || defined(CONFIG_ETHER_ON_FCC)
 364     #define CONFIG_CMD_MII
 365 #endif
 366
 367 #if defined(CONFIG_SYS_RAMBOOT)
 368     #undef CONFIG_CMD_SAVEENV
 369     #undef CONFIG_CMD_LOADS
 370 #else
 371     #define CONFIG_CMD_ELF
 372 #endif
 373
 374
 375 #undef CONFIG_WATCHDOG                  /* watchdog disabled            */
 376
 377 /*
 378  * Miscellaneous configurable options
 379  */
 380 #define CONFIG_SYS_LONGHELP                     /* undef to save memory         */
 381 #define CONFIG_SYS_PROMPT       "SSA=> "        /* Monitor Command Prompt       */
 382 #if defined(CONFIG_CMD_KGDB)
 383 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O Buffer Size      */
 384 #else
 385 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size      */
 386 #endif
 387 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
 388 #define CONFIG_SYS_MAXARGS      16              /* max number of command args   */
 389 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE       /* Boot Argument Buffer Size    */
 390 #define CONFIG_SYS_LOAD_ADDR    0x1000000       /* default load address */
 391 #define CONFIG_SYS_HZ           1000            /* decrementer freq: 1 ms ticks */
 392
 393 /*
 394  * For booting Linux, the board info and command line data
 395  * have to be in the first 8 MB of memory, since this is
 396  * the maximum mapped by the Linux kernel during initialization.
 397  */
 398 #define CONFIG_SYS_BOOTMAPSZ            (8 << 20) /* Initial Memory map for Linux */
 399
 400 /*
 401  * Internal Definitions
 402  *
 403  * Boot Flags
 404  */
 405 #define BOOTFLAG_COLD   0x01            /* Normal Power-On: Boot from FLASH */
 406 #define BOOTFLAG_WARM   0x02            /* Software reboot              */
 407
 408 #if defined(CONFIG_CMD_KGDB)
 409 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 410 #define CONFIG_KGDB_SER_INDEX   2       /* which serial port to use */
 411 #endif
 412
 413 /*Note: change below for your network setting!!! */
 414 #if defined(CONFIG_TSEC_ENET) || defined(CONFIG_ETHER_ON_FCC)
 415 #define CONFIG_HAS_ETH0
 416 #define CONFIG_ETHADDR   00:e0:0c:07:9b:8a
 417 #define CONFIG_HAS_ETH1
 418 #define CONFIG_ETH1ADDR  00:e0:0c:07:9b:8b
 419 #define CONFIG_HAS_ETH2
 420 #define CONFIG_ETH2ADDR  00:e0:0c:07:9b:8c
 421 #endif
 422
 423 /*
 424  * Environment in EEPROM is compatible with different flash sector sizes,
 425  * but only little space is available, so we use a very simple setup.
 426  * With environment in flash, we use a more powerful default configuration.
 427  */
 428 #ifdef CONFIG_ENV_IS_IN_EEPROM          /* use restricted "standard" environment */
 429
 430 #define CONFIG_BAUDRATE         38400
 431
 432 #define CONFIG_BOOTDELAY        3       /* -1 disable autoboot */
 433 #define CONFIG_BOOTCOMMAND      "bootm 0xffc00000 0xffd00000"
 434 #define CONFIG_BOOTARGS         "root=/dev/nfs rw ip=any console=ttyS1,$baudrate"
 435 #define CONFIG_SERVERIP         192.168.85.1
 436 #define CONFIG_IPADDR           192.168.85.60
 437 #define CONFIG_GATEWAYIP        192.168.85.1
 438 #define CONFIG_NETMASK          255.255.255.0
 439 #define CONFIG_HOSTNAME         STX_SSA
 440 #define CONFIG_ROOTPATH         /gppproot
 441 #define CONFIG_BOOTFILE         uImage
 442 #define CONFIG_LOADADDR         0x1000000
 443
 444 #else /* ENV IS IN FLASH                -- use a full-blown envionment */
 445
 446 #define CONFIG_BAUDRATE         115200
 447
 448 #define CONFIG_BOOTDELAY        5       /* -1 disable autoboot */
 449
 450 #define CONFIG_PREBOOT  "echo;" \
 451         "echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \
 452         "echo"
 453
 454 #undef  CONFIG_BOOTARGS         /* the boot command will set bootargs   */
 455
 456 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
 457         "hostname=gp3ssa\0"                                             \
 458         "bootfile=/tftpboot/gp3ssa/uImage\0"                            \
 459         "loadaddr=400000\0"                                             \
 460         "netdev=eth0\0"                                                 \
 461         "consdev=ttyS1\0"                                               \
 462         "nfsargs=setenv bootargs root=/dev/nfs rw "                     \
 463                 "nfsroot=$serverip:$rootpath\0"                         \
 464         "ramargs=setenv bootargs root=/dev/ram rw\0"                    \
 465         "addip=setenv bootargs $bootargs "                              \
 466                 "ip=$ipaddr:$serverip:$gatewayip:$netmask"              \
 467                 ":$hostname:$netdev:off panic=1\0"                      \
 468         "addcons=setenv bootargs $bootargs "                            \
 469                 "console=$consdev,$baudrate\0"                          \
 470         "flash_nfs=run nfsargs addip addcons;"                          \
 471                 "bootm $kernel_addr\0"                                  \
 472         "flash_self=run ramargs addip addcons;"                         \
 473                 "bootm $kernel_addr $ramdisk_addr\0"                    \
 474         "net_nfs=tftp $loadaddr $bootfile;"                             \
 475                 "run nfsargs addip addcons;bootm\0"                     \
 476         "rootpath=/opt/eldk/ppc_85xx\0"                                 \
 477         "kernel_addr=FC000000\0"                                        \
 478         "ramdisk_addr=FC200000\0"                                       \
 479         ""
 480 #define CONFIG_BOOTCOMMAND      "run flash_self"
 481
 482 #endif  /* CONFIG_ENV_IS_IN_EEPROM */
 483
 484 #endif  /* __CONFIG_H */