include/configs/sunxi-common.h

   1 /*
   2  * (C) Copyright 2012-2012 Henrik Nordstrom <henrik@henriknordstrom.net>
   3  *
   4  * (C) Copyright 2007-2011
   5  * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
   6  * Tom Cubie <tangliang@allwinnertech.com>
   7  *
   8  * Configuration settings for the Allwinner sunxi series of boards.
   9  *
  10  * SPDX-License-Identifier:     GPL-2.0+
  11  */
  12
  13 #ifndef _SUNXI_COMMON_CONFIG_H
  14 #define _SUNXI_COMMON_CONFIG_H
  15
  16 #include <asm/arch/cpu.h>
  17 #include <linux/stringify.h>
  18
  19 #ifdef CONFIG_OLD_SUNXI_KERNEL_COMPAT
  20 /*
  21  * The U-Boot workarounds bugs in the outdated buggy sunxi-3.4 kernels at the
  22  * expense of restricting some features, so the regular machine id values can
  23  * be used.
  24  */
  25 # define CONFIG_MACH_TYPE_COMPAT_REV    0
  26 #else
  27 /*
  28  * A compatibility guard to prevent loading outdated buggy sunxi-3.4 kernels.
  29  * Only sunxi-3.4 kernels with appropriate fixes applied are able to pass
  30  * beyond the machine id check.
  31  */
  32 # define CONFIG_MACH_TYPE_COMPAT_REV    1
  33 #endif
  34
  35 /*
  36  * High Level Configuration Options
  37  */
  38 #define CONFIG_SUNXI            /* sunxi family */
  39 #ifdef CONFIG_SPL_BUILD
  40 #define CONFIG_SYS_THUMB_BUILD  /* Thumbs mode to save space in SPL */
  41 #endif
  42
  43 /* Serial & console */
  44 #define CONFIG_SYS_NS16550_SERIAL
  45 /* ns16550 reg in the low bits of cpu reg */
  46 #define CONFIG_SYS_NS16550_CLK          24000000
  47 #ifndef CONFIG_DM_SERIAL
  48 # define CONFIG_SYS_NS16550_REG_SIZE    -4
  49 # define CONFIG_SYS_NS16550_COM1                SUNXI_UART0_BASE
  50 # define CONFIG_SYS_NS16550_COM2                SUNXI_UART1_BASE
  51 # define CONFIG_SYS_NS16550_COM3                SUNXI_UART2_BASE
  52 # define CONFIG_SYS_NS16550_COM4                SUNXI_UART3_BASE
  53 # define CONFIG_SYS_NS16550_COM5                SUNXI_R_UART_BASE
  54 #endif
  55
  56 /* CPU */
  57 #define CONFIG_DISPLAY_CPUINFO
  58 #define CONFIG_TIMER_CLK_FREQ           24000000
  59
  60 /*
  61  * The DRAM Base differs between some models. We cannot use macros for the
  62  * CONFIG_FOO defines which contain the DRAM base address since they end
  63  * up unexpanded in include/autoconf.mk .
  64  *
  65  * So we have to have this #ifdef #else #endif block for these.
  66  */
  67 #ifdef CONFIG_MACH_SUN9I
  68 #define SDRAM_OFFSET(x) 0x2##x
  69 #define CONFIG_SYS_SDRAM_BASE           0x20000000
  70 #define CONFIG_SYS_LOAD_ADDR            0x22000000 /* default load address */
  71 #define CONFIG_SYS_TEXT_BASE            0x2a000000
  72 #define CONFIG_PRE_CON_BUF_ADDR         0x2f000000
  73 /* Note SPL_STACK_R_ADDR is set through Kconfig, we include it here
  74  * since it needs to fit in with the other values. By also #defining it
  75  * we get warnings if the Kconfig value mismatches. */
  76 #define CONFIG_SPL_STACK_R_ADDR         0x2fe00000
  77 #define CONFIG_SPL_BSS_START_ADDR       0x2ff80000
  78 #else
  79 #define SDRAM_OFFSET(x) 0x4##x
  80 #define CONFIG_SYS_SDRAM_BASE           0x40000000
  81 #define CONFIG_SYS_LOAD_ADDR            0x42000000 /* default load address */
  82 #define CONFIG_SYS_TEXT_BASE            0x4a000000
  83 #define CONFIG_PRE_CON_BUF_ADDR         0x4f000000
  84 /* Note SPL_STACK_R_ADDR is set through Kconfig, we include it here
  85  * since it needs to fit in with the other values. By also #defining it
  86  * we get warnings if the Kconfig value mismatches. */
  87 #define CONFIG_SPL_STACK_R_ADDR         0x4fe00000
  88 #define CONFIG_SPL_BSS_START_ADDR       0x4ff80000
  89 #endif
  90
  91 #define CONFIG_SPL_BSS_MAX_SIZE         0x00080000 /* 512 KiB */
  92
  93 #if defined(CONFIG_MACH_SUN9I) || defined(CONFIG_MACH_SUN50I)
  94 /*
  95  * The A80's A1 sram starts at 0x00010000 rather then at 0x00000000 and is
  96  * slightly bigger. Note that it is possible to map the first 32 KiB of the
  97  * A1 at 0x00000000 like with older SoCs by writing 0x16aa0001 to the
  98  * undocumented 0x008000e0 SYS_CTRL register. Where the 16aa is a key and
  99  * the 1 actually activates the mapping of the first 32 KiB to 0x00000000.
 100  */
 101 #define CONFIG_SYS_INIT_RAM_ADDR        0x10000
 102 #define CONFIG_SYS_INIT_RAM_SIZE        0x08000 /* FIXME: 40 KiB ? */
 103 #else
 104 #define CONFIG_SYS_INIT_RAM_ADDR        0x0
 105 #define CONFIG_SYS_INIT_RAM_SIZE        0x8000  /* 32 KiB */
 106 #endif
 107
 108 #define CONFIG_SYS_INIT_SP_OFFSET \
 109         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 110 #define CONFIG_SYS_INIT_SP_ADDR \
 111         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 112
 113 #define CONFIG_NR_DRAM_BANKS            1
 114 #define PHYS_SDRAM_0                    CONFIG_SYS_SDRAM_BASE
 115 #define PHYS_SDRAM_0_SIZE               0x80000000 /* 2 GiB */
 116
 117 #ifdef CONFIG_AHCI
 118 #define CONFIG_LIBATA
 119 #define CONFIG_SCSI_AHCI
 120 #define CONFIG_SCSI_AHCI_PLAT
 121 #define CONFIG_SUNXI_AHCI
 122 #define CONFIG_SYS_64BIT_LBA
 123 #define CONFIG_SYS_SCSI_MAX_SCSI_ID     1
 124 #define CONFIG_SYS_SCSI_MAX_LUN         1
 125 #define CONFIG_SYS_SCSI_MAX_DEVICE      (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
 126                                          CONFIG_SYS_SCSI_MAX_LUN)
 127 #define CONFIG_SCSI
 128 #endif
 129
 130 #define CONFIG_SETUP_MEMORY_TAGS
 131 #define CONFIG_CMDLINE_TAG
 132 #define CONFIG_INITRD_TAG
 133 #define CONFIG_SERIAL_TAG
 134
 135 #ifdef CONFIG_NAND_SUNXI
 136 #define CONFIG_SYS_NAND_MAX_ECCPOS 1664
 137 #define CONFIG_SYS_NAND_ONFI_DETECTION
 138 #define CONFIG_SYS_MAX_NAND_DEVICE 8
 139 #endif
 140
 141 #ifdef CONFIG_SPL_SPI_SUNXI
 142 #define CONFIG_SYS_SPI_U_BOOT_OFFS      0x8000
 143 #endif
 144
 145 /* mmc config */
 146 #ifdef CONFIG_MMC
 147 #define CONFIG_GENERIC_MMC
 148 #define CONFIG_MMC_SUNXI
 149 #define CONFIG_MMC_SUNXI_SLOT           0
 150 #define CONFIG_ENV_IS_IN_MMC
 151 #define CONFIG_SYS_MMC_ENV_DEV          0       /* first detected MMC controller */
 152 #endif
 153
 154 /* 64MB of malloc() pool */
 155 #define CONFIG_SYS_MALLOC_LEN           (CONFIG_ENV_SIZE + (64 << 20))
 156
 157 /*
 158  * Miscellaneous configurable options
 159  */
 160 #define CONFIG_SYS_CBSIZE       1024    /* Console I/O Buffer Size */
 161 #define CONFIG_SYS_PBSIZE       1024    /* Print Buffer Size */
 162 #define CONFIG_SYS_MAXARGS      16      /* max number of command args */
 163
 164 /* Boot Argument Buffer Size */
 165 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE
 166
 167 /* standalone support */
 168 #define CONFIG_STANDALONE_LOAD_ADDR     CONFIG_SYS_LOAD_ADDR
 169
 170 /* baudrate */
 171 #define CONFIG_BAUDRATE                 115200
 172
 173 /* The stack sizes are set up in start.S using the settings below */
 174 #define CONFIG_STACKSIZE                (256 << 10)     /* 256 KiB */
 175
 176 /* FLASH and environment organization */
 177
 178 #define CONFIG_SYS_NO_FLASH
 179
 180 #define CONFIG_SYS_MONITOR_LEN          (768 << 10)     /* 768 KiB */
 181 #define CONFIG_DISPLAY_BOARDINFO
 182
 183 #define CONFIG_ENV_OFFSET               (544 << 10) /* (8 + 24 + 512) KiB */
 184 #define CONFIG_ENV_SIZE                 (128 << 10)     /* 128 KiB */
 185
 186 #define CONFIG_FAT_WRITE        /* enable write access */
 187
 188 #define CONFIG_SPL_FRAMEWORK
 189
 190 #define CONFIG_SPL_BOARD_LOAD_IMAGE
 191
 192 #if defined(CONFIG_MACH_SUN9I)
 193 #define CONFIG_SPL_TEXT_BASE            0x10040         /* sram start+header */
 194 #define CONFIG_SPL_MAX_SIZE             0x5fc0          /* ? KiB on sun9i */
 195 #elif defined(CONFIG_MACH_SUN50I)
 196 #define CONFIG_SPL_TEXT_BASE            0x10040         /* sram start+header */
 197 #define CONFIG_SPL_MAX_SIZE             0x7fc0          /* 32 KiB on sun50i */
 198 #else
 199 #define CONFIG_SPL_TEXT_BASE            0x40            /* sram start+header */
 200 #define CONFIG_SPL_MAX_SIZE             0x5fc0          /* 24KB on sun4i/sun7i */
 201 #endif
 202
 203 #ifndef CONFIG_ARM64
 204 #define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv7/sunxi/u-boot-spl.lds"
 205 #endif
 206
 207 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 80      /* 40KiB */
 208 #define CONFIG_SPL_PAD_TO               32768           /* decimal for 'dd' */
 209
 210 #if defined(CONFIG_MACH_SUN9I) || defined(CONFIG_MACH_SUN50I)
 211 /* FIXME: 40 KiB instead of 32 KiB ? */
 212 #define LOW_LEVEL_SRAM_STACK            0x00018000
 213 #define CONFIG_SPL_STACK                LOW_LEVEL_SRAM_STACK
 214 #else
 215 /* end of 32 KiB in sram */
 216 #define LOW_LEVEL_SRAM_STACK            0x00008000 /* End of sram */
 217 #define CONFIG_SPL_STACK                LOW_LEVEL_SRAM_STACK
 218 #endif
 219
 220 /* I2C */
 221 #if defined CONFIG_AXP152_POWER || defined CONFIG_AXP209_POWER || \
 222     defined CONFIG_SY8106A_POWER
 223 #endif
 224
 225 #if defined CONFIG_I2C0_ENABLE || defined CONFIG_I2C1_ENABLE || \
 226     defined CONFIG_I2C2_ENABLE || defined CONFIG_I2C3_ENABLE || \
 227     defined CONFIG_I2C4_ENABLE || defined CONFIG_R_I2C_ENABLE
 228 #define CONFIG_SYS_I2C
 229 #define CONFIG_SYS_I2C_MVTWSI
 230 #define CONFIG_SYS_I2C_SPEED            400000
 231 #define CONFIG_SYS_I2C_SLAVE            0x7f
 232 #endif
 233
 234 #if defined CONFIG_VIDEO_LCD_PANEL_I2C && !(defined CONFIG_SPL_BUILD)
 235 #define CONFIG_SYS_I2C_SOFT
 236 #define CONFIG_SYS_I2C_SOFT_SPEED       50000
 237 #define CONFIG_SYS_I2C_SOFT_SLAVE       0x00
 238 /* We use pin names in Kconfig and sunxi_name_to_gpio() */
 239 #define CONFIG_SOFT_I2C_GPIO_SDA        soft_i2c_gpio_sda
 240 #define CONFIG_SOFT_I2C_GPIO_SCL        soft_i2c_gpio_scl
 241 #ifndef __ASSEMBLY__
 242 extern int soft_i2c_gpio_sda;
 243 extern int soft_i2c_gpio_scl;
 244 #endif
 245 #define CONFIG_VIDEO_LCD_I2C_BUS        0 /* The lcd panel soft i2c is bus 0 */
 246 #define CONFIG_SYS_SPD_BUS_NUM          1 /* And the axp209 i2c bus is bus 1 */
 247 #else
 248 #define CONFIG_SYS_SPD_BUS_NUM          0 /* The axp209 i2c bus is bus 0 */
 249 #define CONFIG_VIDEO_LCD_I2C_BUS        -1 /* NA, but necessary to compile */
 250 #endif
 251
 252 /* PMU */
 253 #if defined CONFIG_AXP152_POWER || defined CONFIG_AXP209_POWER || \
 254     defined CONFIG_AXP221_POWER || defined CONFIG_AXP818_POWER || \
 255     defined CONFIG_SY8106A_POWER
 256 #endif
 257
 258 #ifndef CONFIG_CONS_INDEX
 259 #define CONFIG_CONS_INDEX              1       /* UART0 */
 260 #endif
 261
 262 #ifdef CONFIG_REQUIRE_SERIAL_CONSOLE
 263 #if CONFIG_CONS_INDEX == 1
 264 #ifdef CONFIG_MACH_SUN9I
 265 #define OF_STDOUT_PATH          "/soc/serial@07000000:115200"
 266 #else
 267 #define OF_STDOUT_PATH          "/soc@01c00000/serial@01c28000:115200"
 268 #endif
 269 #elif CONFIG_CONS_INDEX == 2 && defined(CONFIG_MACH_SUN5I)
 270 #define OF_STDOUT_PATH          "/soc@01c00000/serial@01c28400:115200"
 271 #elif CONFIG_CONS_INDEX == 3 && defined(CONFIG_MACH_SUN8I)
 272 #define OF_STDOUT_PATH          "/soc@01c00000/serial@01c28800:115200"
 273 #elif CONFIG_CONS_INDEX == 5 && defined(CONFIG_MACH_SUN8I)
 274 #define OF_STDOUT_PATH          "/soc@01c00000/serial@01f02800:115200"
 275 #else
 276 #error Unsupported console port nr. Please fix stdout-path in sunxi-common.h.
 277 #endif
 278 #endif /* ifdef CONFIG_REQUIRE_SERIAL_CONSOLE */
 279
 280 /* GPIO */
 281 #define CONFIG_SUNXI_GPIO
 282
 283 #ifdef CONFIG_VIDEO
 284 /*
 285  * The amount of RAM to keep free at the top of RAM when relocating u-boot,
 286  * to use as framebuffer. This must be a multiple of 4096.
 287  */
 288 #define CONFIG_SUNXI_MAX_FB_SIZE (16 << 20)
 289
 290 /* Do we want to initialize a simple FB? */
 291 #define CONFIG_VIDEO_DT_SIMPLEFB
 292
 293 #define CONFIG_VIDEO_SUNXI
 294
 295 #define CONFIG_CFB_CONSOLE
 296 #define CONFIG_VIDEO_SW_CURSOR
 297 #define CONFIG_VIDEO_LOGO
 298 #define CONFIG_VIDEO_STD_TIMINGS
 299 #define CONFIG_I2C_EDID
 300 #define VIDEO_LINE_LEN (pGD->plnSizeX)
 301
 302 /* allow both serial and cfb console. */
 303 #define CONFIG_CONSOLE_MUX
 304 /* stop x86 thinking in cfbconsole from trying to init a pc keyboard */
 305 #define CONFIG_VGA_AS_SINGLE_DEVICE
 306
 307 #endif /* CONFIG_VIDEO */
 308
 309 /* Ethernet support */
 310 #ifdef CONFIG_SUNXI_EMAC
 311 #define CONFIG_PHY_ADDR         1
 312 #define CONFIG_MII                      /* MII PHY management           */
 313 #define CONFIG_PHYLIB
 314 #endif
 315
 316 #ifdef CONFIG_SUNXI_GMAC
 317 #define CONFIG_PHY_GIGE                 /* GMAC can use gigabit PHY     */
 318 #define CONFIG_PHY_ADDR         1
 319 #define CONFIG_MII                      /* MII PHY management           */
 320 #define CONFIG_PHY_REALTEK
 321 #endif
 322
 323 #ifdef CONFIG_USB_EHCI_HCD
 324 #define CONFIG_USB_OHCI_NEW
 325 #define CONFIG_USB_OHCI_SUNXI
 326 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 1
 327 #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 1
 328 #endif
 329
 330 #ifdef CONFIG_USB_MUSB_SUNXI
 331 #define CONFIG_USB_MUSB_PIO_ONLY
 332 #endif
 333
 334 #ifdef CONFIG_USB_MUSB_GADGET
 335 #define CONFIG_USB_FUNCTION_DFU
 336 #define CONFIG_USB_FUNCTION_FASTBOOT
 337 #define CONFIG_USB_FUNCTION_MASS_STORAGE
 338 #endif
 339
 340 #ifdef CONFIG_USB_FUNCTION_DFU
 341 #define CONFIG_DFU_RAM
 342 #endif
 343
 344 #ifdef CONFIG_USB_FUNCTION_FASTBOOT
 345 #define CONFIG_CMD_FASTBOOT
 346 #define CONFIG_FASTBOOT_BUF_ADDR        CONFIG_SYS_LOAD_ADDR
 347 #define CONFIG_FASTBOOT_BUF_SIZE        0x2000000
 348 #define CONFIG_ANDROID_BOOT_IMAGE
 349
 350 #define CONFIG_FASTBOOT_FLASH
 351
 352 #ifdef CONFIG_MMC
 353 #define CONFIG_FASTBOOT_FLASH_MMC_DEV   0
 354 #define CONFIG_EFI_PARTITION
 355 #endif
 356 #endif
 357
 358 #ifdef CONFIG_USB_FUNCTION_MASS_STORAGE
 359 #endif
 360
 361 #ifdef CONFIG_USB_KEYBOARD
 362 #define CONFIG_CONSOLE_MUX
 363 #define CONFIG_PREBOOT
 364 #define CONFIG_SYS_STDIO_DEREGISTER
 365 #define CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE
 366 #endif
 367
 368 #if !defined CONFIG_ENV_IS_IN_MMC && \
 369     !defined CONFIG_ENV_IS_IN_NAND && \
 370     !defined CONFIG_ENV_IS_IN_FAT && \
 371     !defined CONFIG_ENV_IS_IN_SPI_FLASH
 372 #define CONFIG_ENV_IS_NOWHERE
 373 #endif
 374
 375 #define CONFIG_MISC_INIT_R
 376 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
 377
 378 #ifndef CONFIG_SPL_BUILD
 379 #include <config_distro_defaults.h>
 380
 381 /* Enable pre-console buffer to get complete log on the VGA console */
 382 #define CONFIG_PRE_CONSOLE_BUFFER
 383 #define CONFIG_PRE_CON_BUF_SZ           4096 /* Aprox 2 80*25 screens */
 384
 385 #ifdef CONFIG_ARM64
 386 /*
 387  * Boards seem to come with at least 512MB of DRAM.
 388  * The kernel should go at 512K, which is the default text offset (that will
 389  * be adjusted at runtime if needed).
 390  * There is no compression for arm64 kernels (yet), so leave some space
 391  * for really big kernels, say 256MB for now.
 392  * Scripts, PXE and DTBs should go afterwards, leaving the rest for the initrd.
 393  * Align the initrd to a 2MB page.
 394  */
 395 #define KERNEL_ADDR_R   __stringify(SDRAM_OFFSET(0080000))
 396 #define FDT_ADDR_R      __stringify(SDRAM_OFFSET(FA00000))
 397 #define SCRIPT_ADDR_R   __stringify(SDRAM_OFFSET(FC00000))
 398 #define PXEFILE_ADDR_R  __stringify(SDRAM_OFFSET(FD00000))
 399 #define RAMDISK_ADDR_R  __stringify(SDRAM_OFFSET(FE00000))
 400
 401 #else
 402 /*
 403  * 160M RAM (256M minimum minus 64MB heap + 32MB for u-boot, stack, fb, etc.
 404  * 32M uncompressed kernel, 16M compressed kernel, 1M fdt,
 405  * 1M script, 1M pxe and the ramdisk at the end.
 406  */
 407
 408 #define KERNEL_ADDR_R  __stringify(SDRAM_OFFSET(2000000))
 409 #define FDT_ADDR_R     __stringify(SDRAM_OFFSET(3000000))
 410 #define SCRIPT_ADDR_R  __stringify(SDRAM_OFFSET(3100000))
 411 #define PXEFILE_ADDR_R __stringify(SDRAM_OFFSET(3200000))
 412 #define RAMDISK_ADDR_R __stringify(SDRAM_OFFSET(3300000))
 413 #endif
 414
 415 #define MEM_LAYOUT_ENV_SETTINGS \
 416         "bootm_size=0xa000000\0" \
 417         "kernel_addr_r=" KERNEL_ADDR_R "\0" \
 418         "fdt_addr_r=" FDT_ADDR_R "\0" \
 419         "scriptaddr=" SCRIPT_ADDR_R "\0" \
 420         "pxefile_addr_r=" PXEFILE_ADDR_R "\0" \
 421         "ramdisk_addr_r=" RAMDISK_ADDR_R "\0"
 422
 423 #define DFU_ALT_INFO_RAM \
 424         "dfu_alt_info_ram=" \
 425         "kernel ram " KERNEL_ADDR_R " 0x1000000;" \
 426         "fdt ram " FDT_ADDR_R " 0x100000;" \
 427         "ramdisk ram " RAMDISK_ADDR_R " 0x4000000\0"
 428
 429 #ifdef CONFIG_MMC
 430 #define BOOT_TARGET_DEVICES_MMC(func) func(MMC, mmc, 0)
 431 #if CONFIG_MMC_SUNXI_SLOT_EXTRA != -1
 432 #define BOOT_TARGET_DEVICES_MMC_EXTRA(func) func(MMC, mmc, 1)
 433 #else
 434 #define BOOT_TARGET_DEVICES_MMC_EXTRA(func)
 435 #endif
 436 #else
 437 #define BOOT_TARGET_DEVICES_MMC(func)
 438 #define BOOT_TARGET_DEVICES_MMC_EXTRA(func)
 439 #endif
 440
 441 #ifdef CONFIG_AHCI
 442 #define BOOT_TARGET_DEVICES_SCSI(func) func(SCSI, scsi, 0)
 443 #else
 444 #define BOOT_TARGET_DEVICES_SCSI(func)
 445 #endif
 446
 447 #ifdef CONFIG_USB_STORAGE
 448 #define BOOT_TARGET_DEVICES_USB(func) func(USB, usb, 0)
 449 #else
 450 #define BOOT_TARGET_DEVICES_USB(func)
 451 #endif
 452
 453 /* FEL boot support, auto-execute boot.scr if a script address was provided */
 454 #define BOOTENV_DEV_FEL(devtypeu, devtypel, instance) \
 455         "bootcmd_fel=" \
 456                 "if test -n ${fel_booted} && test -n ${fel_scriptaddr}; then " \
 457                         "echo '(FEL boot)'; " \
 458                         "source ${fel_scriptaddr}; " \
 459                 "fi\0"
 460 #define BOOTENV_DEV_NAME_FEL(devtypeu, devtypel, instance) \
 461         "fel "
 462
 463 #define BOOT_TARGET_DEVICES(func) \
 464         func(FEL, fel, na) \
 465         BOOT_TARGET_DEVICES_MMC(func) \
 466         BOOT_TARGET_DEVICES_MMC_EXTRA(func) \
 467         BOOT_TARGET_DEVICES_SCSI(func) \
 468         BOOT_TARGET_DEVICES_USB(func) \
 469         func(PXE, pxe, na) \
 470         func(DHCP, dhcp, na)
 471
 472 #ifdef CONFIG_OLD_SUNXI_KERNEL_COMPAT
 473 #define BOOTCMD_SUNXI_COMPAT \
 474         "bootcmd_sunxi_compat=" \
 475                 "setenv root /dev/mmcblk0p3 rootwait; " \
 476                 "if ext2load mmc 0 0x44000000 uEnv.txt; then " \
 477                         "echo Loaded environment from uEnv.txt; " \
 478                         "env import -t 0x44000000 ${filesize}; " \
 479                 "fi; " \
 480                 "setenv bootargs console=${console} root=${root} ${extraargs}; " \
 481                 "ext2load mmc 0 0x43000000 script.bin && " \
 482                 "ext2load mmc 0 0x48000000 uImage && " \
 483                 "bootm 0x48000000\0"
 484 #else
 485 #define BOOTCMD_SUNXI_COMPAT
 486 #endif
 487
 488 #include <config_distro_bootcmd.h>
 489
 490 #ifdef CONFIG_USB_KEYBOARD
 491 #define CONSOLE_STDIN_SETTINGS \
 492         "preboot=usb start\0" \
 493         "stdin=serial,usbkbd\0"
 494 #else
 495 #define CONSOLE_STDIN_SETTINGS \
 496         "stdin=serial\0"
 497 #endif
 498
 499 #ifdef CONFIG_VIDEO
 500 #define CONSOLE_STDOUT_SETTINGS \
 501         "stdout=serial,vga\0" \
 502         "stderr=serial,vga\0"
 503 #else
 504 #define CONSOLE_STDOUT_SETTINGS \
 505         "stdout=serial\0" \
 506         "stderr=serial\0"
 507 #endif
 508
 509 #define CONSOLE_ENV_SETTINGS \
 510         CONSOLE_STDIN_SETTINGS \
 511         CONSOLE_STDOUT_SETTINGS
 512
 513 #define CONFIG_EXTRA_ENV_SETTINGS \
 514         CONSOLE_ENV_SETTINGS \
 515         MEM_LAYOUT_ENV_SETTINGS \
 516         DFU_ALT_INFO_RAM \
 517         "fdtfile=" CONFIG_DEFAULT_DEVICE_TREE ".dtb\0" \
 518         "console=ttyS0,115200\0" \
 519         BOOTCMD_SUNXI_COMPAT \
 520         BOOTENV
 521
 522 #else /* ifndef CONFIG_SPL_BUILD */
 523 #define CONFIG_EXTRA_ENV_SETTINGS
 524 #endif
 525
 526 #endif /* _SUNXI_COMMON_CONFIG_H */