include/configs/sunxi-common.h

   1 /*
   2  * (C) Copyright 2012-2012 Henrik Nordstrom <henrik@henriknordstrom.net>
   3  *
   4  * (C) Copyright 2007-2011
   5  * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
   6  * Tom Cubie <tangliang@allwinnertech.com>
   7  *
   8  * Configuration settings for the Allwinner sunxi series of boards.
   9  *
  10  * SPDX-License-Identifier:     GPL-2.0+
  11  */
  12
  13 #ifndef _SUNXI_COMMON_CONFIG_H
  14 #define _SUNXI_COMMON_CONFIG_H
  15
  16 #include <asm/arch/cpu.h>
  17 #include <linux/stringify.h>
  18
  19 #ifdef CONFIG_OLD_SUNXI_KERNEL_COMPAT
  20 /*
  21  * The U-Boot workarounds bugs in the outdated buggy sunxi-3.4 kernels at the
  22  * expense of restricting some features, so the regular machine id values can
  23  * be used.
  24  */
  25 # define CONFIG_MACH_TYPE_COMPAT_REV    0
  26 #else
  27 /*
  28  * A compatibility guard to prevent loading outdated buggy sunxi-3.4 kernels.
  29  * Only sunxi-3.4 kernels with appropriate fixes applied are able to pass
  30  * beyond the machine id check.
  31  */
  32 # define CONFIG_MACH_TYPE_COMPAT_REV    1
  33 #endif
  34
  35 /* Serial & console */
  36 #define CONFIG_SYS_NS16550_SERIAL
  37 /* ns16550 reg in the low bits of cpu reg */
  38 #define CONFIG_SYS_NS16550_CLK          24000000
  39 #ifndef CONFIG_DM_SERIAL
  40 # define CONFIG_SYS_NS16550_REG_SIZE    -4
  41 # define CONFIG_SYS_NS16550_COM1                SUNXI_UART0_BASE
  42 # define CONFIG_SYS_NS16550_COM2                SUNXI_UART1_BASE
  43 # define CONFIG_SYS_NS16550_COM3                SUNXI_UART2_BASE
  44 # define CONFIG_SYS_NS16550_COM4                SUNXI_UART3_BASE
  45 # define CONFIG_SYS_NS16550_COM5                SUNXI_R_UART_BASE
  46 #endif
  47
  48 /* CPU */
  49 #define COUNTER_FREQUENCY               24000000
  50
  51 /*
  52  * The DRAM Base differs between some models. We cannot use macros for the
  53  * CONFIG_FOO defines which contain the DRAM base address since they end
  54  * up unexpanded in include/autoconf.mk .
  55  *
  56  * So we have to have this #ifdef #else #endif block for these.
  57  */
  58 #ifdef CONFIG_MACH_SUN9I
  59 #define SDRAM_OFFSET(x) 0x2##x
  60 #define CONFIG_SYS_SDRAM_BASE           0x20000000
  61 #define CONFIG_SYS_LOAD_ADDR            0x22000000 /* default load address */
  62 #define CONFIG_SYS_TEXT_BASE            0x2a000000
  63 /* Note SPL_STACK_R_ADDR is set through Kconfig, we include it here
  64  * since it needs to fit in with the other values. By also #defining it
  65  * we get warnings if the Kconfig value mismatches. */
  66 #define CONFIG_SPL_STACK_R_ADDR         0x2fe00000
  67 #define CONFIG_SPL_BSS_START_ADDR       0x2ff80000
  68 #else
  69 #define SDRAM_OFFSET(x) 0x4##x
  70 #define CONFIG_SYS_SDRAM_BASE           0x40000000
  71 #define CONFIG_SYS_LOAD_ADDR            0x42000000 /* default load address */
  72 #define CONFIG_SYS_TEXT_BASE            0x4a000000
  73 /* Note SPL_STACK_R_ADDR is set through Kconfig, we include it here
  74  * since it needs to fit in with the other values. By also #defining it
  75  * we get warnings if the Kconfig value mismatches. */
  76 #define CONFIG_SPL_STACK_R_ADDR         0x4fe00000
  77 #define CONFIG_SPL_BSS_START_ADDR       0x4ff80000
  78 #endif
  79
  80 #define CONFIG_SPL_BSS_MAX_SIZE         0x00080000 /* 512 KiB */
  81
  82 #ifdef CONFIG_SUNXI_HIGH_SRAM
  83 /*
  84  * The A80's A1 sram starts at 0x00010000 rather then at 0x00000000 and is
  85  * slightly bigger. Note that it is possible to map the first 32 KiB of the
  86  * A1 at 0x00000000 like with older SoCs by writing 0x16aa0001 to the
  87  * undocumented 0x008000e0 SYS_CTRL register. Where the 16aa is a key and
  88  * the 1 actually activates the mapping of the first 32 KiB to 0x00000000.
  89  */
  90 #define CONFIG_SYS_INIT_RAM_ADDR        0x10000
  91 #define CONFIG_SYS_INIT_RAM_SIZE        0x08000 /* FIXME: 40 KiB ? */
  92 #else
  93 #define CONFIG_SYS_INIT_RAM_ADDR        0x0
  94 #define CONFIG_SYS_INIT_RAM_SIZE        0x8000  /* 32 KiB */
  95 #endif
  96
  97 #define CONFIG_SYS_INIT_SP_OFFSET \
  98         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
  99 #define CONFIG_SYS_INIT_SP_ADDR \
 100         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 101
 102 #define CONFIG_NR_DRAM_BANKS            1
 103 #define PHYS_SDRAM_0                    CONFIG_SYS_SDRAM_BASE
 104 #define PHYS_SDRAM_0_SIZE               0x80000000 /* 2 GiB */
 105
 106 #ifdef CONFIG_AHCI
 107 #define CONFIG_LIBATA
 108 #define CONFIG_SCSI_AHCI
 109 #define CONFIG_SCSI_AHCI_PLAT
 110 #define CONFIG_SUNXI_AHCI
 111 #define CONFIG_SYS_64BIT_LBA
 112 #define CONFIG_SYS_SCSI_MAX_SCSI_ID     1
 113 #define CONFIG_SYS_SCSI_MAX_LUN         1
 114 #define CONFIG_SYS_SCSI_MAX_DEVICE      (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
 115                                          CONFIG_SYS_SCSI_MAX_LUN)
 116 #define CONFIG_SCSI
 117 #endif
 118
 119 #define CONFIG_SETUP_MEMORY_TAGS
 120 #define CONFIG_CMDLINE_TAG
 121 #define CONFIG_INITRD_TAG
 122 #define CONFIG_SERIAL_TAG
 123
 124 #ifdef CONFIG_NAND_SUNXI
 125 #define CONFIG_SYS_NAND_MAX_ECCPOS 1664
 126 #define CONFIG_SYS_NAND_ONFI_DETECTION
 127 #define CONFIG_SYS_MAX_NAND_DEVICE 8
 128 #endif
 129
 130 #ifdef CONFIG_SPL_SPI_SUNXI
 131 #define CONFIG_SYS_SPI_U_BOOT_OFFS      0x8000
 132 #endif
 133
 134 /* mmc config */
 135 #ifdef CONFIG_MMC
 136 #define CONFIG_MMC_SUNXI_SLOT           0
 137 #define CONFIG_ENV_IS_IN_MMC
 138 #define CONFIG_SYS_MMC_ENV_DEV          0       /* first detected MMC controller */
 139 #define CONFIG_SYS_MMC_MAX_DEVICE       4
 140 #endif
 141
 142 /* 64MB of malloc() pool */
 143 #define CONFIG_SYS_MALLOC_LEN           (CONFIG_ENV_SIZE + (64 << 20))
 144
 145 /*
 146  * Miscellaneous configurable options
 147  */
 148 #define CONFIG_SYS_CBSIZE       1024    /* Console I/O Buffer Size */
 149 #define CONFIG_SYS_PBSIZE       1024    /* Print Buffer Size */
 150 #define CONFIG_SYS_MAXARGS      16      /* max number of command args */
 151
 152 /* Boot Argument Buffer Size */
 153 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE
 154
 155 /* standalone support */
 156 #define CONFIG_STANDALONE_LOAD_ADDR     CONFIG_SYS_LOAD_ADDR
 157
 158 /* FLASH and environment organization */
 159
 160 #define CONFIG_SYS_MONITOR_LEN          (768 << 10)     /* 768 KiB */
 161
 162 #define CONFIG_ENV_OFFSET               (544 << 10) /* (8 + 24 + 512) KiB */
 163 #define CONFIG_ENV_SIZE                 (128 << 10)     /* 128 KiB */
 164
 165 #define CONFIG_FAT_WRITE        /* enable write access */
 166
 167 #define CONFIG_SPL_FRAMEWORK
 168
 169 #ifndef CONFIG_ARM64            /* AArch64 FEL support is not ready yet */
 170 #define CONFIG_SPL_BOARD_LOAD_IMAGE
 171 #endif
 172
 173 #ifdef CONFIG_SUNXI_HIGH_SRAM
 174 #define CONFIG_SPL_TEXT_BASE            0x10040         /* sram start+header */
 175 #define CONFIG_SPL_MAX_SIZE             0x7fc0          /* 32 KiB */
 176 #define LOW_LEVEL_SRAM_STACK            0x00018000
 177 #else
 178 #define CONFIG_SPL_TEXT_BASE            0x40            /* sram start+header */
 179 #define CONFIG_SPL_MAX_SIZE             0x5fc0          /* 24KB on sun4i/sun7i */
 180 #define LOW_LEVEL_SRAM_STACK            0x00008000      /* End of sram */
 181 #endif
 182
 183 #define CONFIG_SPL_STACK                LOW_LEVEL_SRAM_STACK
 184
 185 #ifndef CONFIG_ARM64
 186 #define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv7/sunxi/u-boot-spl.lds"
 187 #endif
 188
 189 #define CONFIG_SPL_PAD_TO               32768           /* decimal for 'dd' */
 190
 191
 192 /* I2C */
 193 #if defined CONFIG_AXP152_POWER || defined CONFIG_AXP209_POWER || \
 194     defined CONFIG_SY8106A_POWER
 195 #endif
 196
 197 #if defined CONFIG_I2C0_ENABLE || defined CONFIG_I2C1_ENABLE || \
 198     defined CONFIG_I2C2_ENABLE || defined CONFIG_I2C3_ENABLE || \
 199     defined CONFIG_I2C4_ENABLE || defined CONFIG_R_I2C_ENABLE
 200 #define CONFIG_SYS_I2C
 201 #define CONFIG_SYS_I2C_MVTWSI
 202 #define CONFIG_SYS_I2C_SPEED            400000
 203 #define CONFIG_SYS_I2C_SLAVE            0x7f
 204 #endif
 205
 206 #if defined CONFIG_VIDEO_LCD_PANEL_I2C && !(defined CONFIG_SPL_BUILD)
 207 #define CONFIG_SYS_I2C_SOFT
 208 #define CONFIG_SYS_I2C_SOFT_SPEED       50000
 209 #define CONFIG_SYS_I2C_SOFT_SLAVE       0x00
 210 /* We use pin names in Kconfig and sunxi_name_to_gpio() */
 211 #define CONFIG_SOFT_I2C_GPIO_SDA        soft_i2c_gpio_sda
 212 #define CONFIG_SOFT_I2C_GPIO_SCL        soft_i2c_gpio_scl
 213 #ifndef __ASSEMBLY__
 214 extern int soft_i2c_gpio_sda;
 215 extern int soft_i2c_gpio_scl;
 216 #endif
 217 #define CONFIG_VIDEO_LCD_I2C_BUS        0 /* The lcd panel soft i2c is bus 0 */
 218 #define CONFIG_SYS_SPD_BUS_NUM          1 /* And the axp209 i2c bus is bus 1 */
 219 #else
 220 #define CONFIG_SYS_SPD_BUS_NUM          0 /* The axp209 i2c bus is bus 0 */
 221 #define CONFIG_VIDEO_LCD_I2C_BUS        -1 /* NA, but necessary to compile */
 222 #endif
 223
 224 /* PMU */
 225 #if defined CONFIG_AXP152_POWER || defined CONFIG_AXP209_POWER || \
 226     defined CONFIG_AXP221_POWER || defined CONFIG_AXP818_POWER || \
 227     defined CONFIG_SY8106A_POWER
 228 #endif
 229
 230 #ifndef CONFIG_CONS_INDEX
 231 #define CONFIG_CONS_INDEX              1       /* UART0 */
 232 #endif
 233
 234 #ifdef CONFIG_REQUIRE_SERIAL_CONSOLE
 235 #if CONFIG_CONS_INDEX == 1
 236 #ifdef CONFIG_MACH_SUN9I
 237 #define OF_STDOUT_PATH          "/soc/serial@07000000:115200"
 238 #else
 239 #define OF_STDOUT_PATH          "/soc@01c00000/serial@01c28000:115200"
 240 #endif
 241 #elif CONFIG_CONS_INDEX == 2 && defined(CONFIG_MACH_SUN5I)
 242 #define OF_STDOUT_PATH          "/soc@01c00000/serial@01c28400:115200"
 243 #elif CONFIG_CONS_INDEX == 3 && defined(CONFIG_MACH_SUN8I)
 244 #define OF_STDOUT_PATH          "/soc@01c00000/serial@01c28800:115200"
 245 #elif CONFIG_CONS_INDEX == 5 && defined(CONFIG_MACH_SUN8I)
 246 #define OF_STDOUT_PATH          "/soc@01c00000/serial@01f02800:115200"
 247 #else
 248 #error Unsupported console port nr. Please fix stdout-path in sunxi-common.h.
 249 #endif
 250 #endif /* ifdef CONFIG_REQUIRE_SERIAL_CONSOLE */
 251
 252 /* GPIO */
 253 #define CONFIG_SUNXI_GPIO
 254
 255 #ifdef CONFIG_VIDEO
 256 /*
 257  * The amount of RAM to keep free at the top of RAM when relocating u-boot,
 258  * to use as framebuffer. This must be a multiple of 4096.
 259  */
 260 #define CONFIG_SUNXI_MAX_FB_SIZE (16 << 20)
 261
 262 /* Do we want to initialize a simple FB? */
 263 #define CONFIG_VIDEO_DT_SIMPLEFB
 264
 265 #define CONFIG_VIDEO_SUNXI
 266
 267 #define CONFIG_VIDEO_LOGO
 268 #define CONFIG_VIDEO_STD_TIMINGS
 269 #define CONFIG_I2C_EDID
 270 #define VIDEO_LINE_LEN (pGD->plnSizeX)
 271
 272 /* allow both serial and cfb console. */
 273 /* stop x86 thinking in cfbconsole from trying to init a pc keyboard */
 274
 275 #endif /* CONFIG_VIDEO */
 276
 277 /* Ethernet support */
 278 #ifdef CONFIG_SUNXI_EMAC
 279 #define CONFIG_PHY_ADDR         1
 280 #define CONFIG_MII                      /* MII PHY management           */
 281 #define CONFIG_PHYLIB
 282 #endif
 283
 284 #ifdef CONFIG_SUNXI_GMAC
 285 #define CONFIG_PHY_GIGE                 /* GMAC can use gigabit PHY     */
 286 #define CONFIG_PHY_ADDR         1
 287 #define CONFIG_MII                      /* MII PHY management           */
 288 #define CONFIG_PHY_REALTEK
 289 #endif
 290
 291 #ifdef CONFIG_USB_EHCI_HCD
 292 #define CONFIG_USB_OHCI_NEW
 293 #define CONFIG_USB_OHCI_SUNXI
 294 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 1
 295 #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 1
 296 #endif
 297
 298 #ifdef CONFIG_USB_MUSB_SUNXI
 299 #define CONFIG_USB_MUSB_PIO_ONLY
 300 #endif
 301
 302 #ifdef CONFIG_USB_MUSB_GADGET
 303 #define CONFIG_USB_FUNCTION_FASTBOOT
 304 #define CONFIG_USB_FUNCTION_MASS_STORAGE
 305 #endif
 306
 307 #ifdef CONFIG_USB_FUNCTION_FASTBOOT
 308 #define CONFIG_CMD_FASTBOOT
 309 #define CONFIG_FASTBOOT_BUF_ADDR        CONFIG_SYS_LOAD_ADDR
 310 #define CONFIG_FASTBOOT_BUF_SIZE        0x2000000
 311 #define CONFIG_ANDROID_BOOT_IMAGE
 312
 313 #define CONFIG_FASTBOOT_FLASH
 314
 315 #ifdef CONFIG_MMC
 316 #define CONFIG_FASTBOOT_FLASH_MMC_DEV   0
 317 #endif
 318 #endif
 319
 320 #ifdef CONFIG_USB_FUNCTION_MASS_STORAGE
 321 #endif
 322
 323 #ifdef CONFIG_USB_KEYBOARD
 324 #define CONFIG_PREBOOT
 325 #define CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE
 326 #endif
 327
 328 #if !defined CONFIG_ENV_IS_IN_MMC && \
 329     !defined CONFIG_ENV_IS_IN_NAND && \
 330     !defined CONFIG_ENV_IS_IN_FAT && \
 331     !defined CONFIG_ENV_IS_IN_SPI_FLASH
 332 #define CONFIG_ENV_IS_NOWHERE
 333 #endif
 334
 335 #define CONFIG_MISC_INIT_R
 336
 337 #ifndef CONFIG_SPL_BUILD
 338 #include <config_distro_defaults.h>
 339
 340 #ifdef CONFIG_ARM64
 341 /*
 342  * Boards seem to come with at least 512MB of DRAM.
 343  * The kernel should go at 512K, which is the default text offset (that will
 344  * be adjusted at runtime if needed).
 345  * There is no compression for arm64 kernels (yet), so leave some space
 346  * for really big kernels, say 256MB for now.
 347  * Scripts, PXE and DTBs should go afterwards, leaving the rest for the initrd.
 348  * Align the initrd to a 2MB page.
 349  */
 350 #define KERNEL_ADDR_R   __stringify(SDRAM_OFFSET(0080000))
 351 #define FDT_ADDR_R      __stringify(SDRAM_OFFSET(FA00000))
 352 #define SCRIPT_ADDR_R   __stringify(SDRAM_OFFSET(FC00000))
 353 #define PXEFILE_ADDR_R  __stringify(SDRAM_OFFSET(FD00000))
 354 #define RAMDISK_ADDR_R  __stringify(SDRAM_OFFSET(FE00000))
 355
 356 #else
 357 /*
 358  * 160M RAM (256M minimum minus 64MB heap + 32MB for u-boot, stack, fb, etc.
 359  * 32M uncompressed kernel, 16M compressed kernel, 1M fdt,
 360  * 1M script, 1M pxe and the ramdisk at the end.
 361  */
 362
 363 #define KERNEL_ADDR_R  __stringify(SDRAM_OFFSET(2000000))
 364 #define FDT_ADDR_R     __stringify(SDRAM_OFFSET(3000000))
 365 #define SCRIPT_ADDR_R  __stringify(SDRAM_OFFSET(3100000))
 366 #define PXEFILE_ADDR_R __stringify(SDRAM_OFFSET(3200000))
 367 #define RAMDISK_ADDR_R __stringify(SDRAM_OFFSET(3300000))
 368 #endif
 369
 370 #define MEM_LAYOUT_ENV_SETTINGS \
 371         "bootm_size=0xa000000\0" \
 372         "kernel_addr_r=" KERNEL_ADDR_R "\0" \
 373         "fdt_addr_r=" FDT_ADDR_R "\0" \
 374         "scriptaddr=" SCRIPT_ADDR_R "\0" \
 375         "pxefile_addr_r=" PXEFILE_ADDR_R "\0" \
 376         "ramdisk_addr_r=" RAMDISK_ADDR_R "\0"
 377
 378 #define DFU_ALT_INFO_RAM \
 379         "dfu_alt_info_ram=" \
 380         "kernel ram " KERNEL_ADDR_R " 0x1000000;" \
 381         "fdt ram " FDT_ADDR_R " 0x100000;" \
 382         "ramdisk ram " RAMDISK_ADDR_R " 0x4000000\0"
 383
 384 #ifdef CONFIG_MMC
 385 #define BOOT_TARGET_DEVICES_MMC(func) func(MMC, mmc, 0)
 386 #if CONFIG_MMC_SUNXI_SLOT_EXTRA != -1
 387 #define BOOT_TARGET_DEVICES_MMC_EXTRA(func) func(MMC, mmc, 1)
 388 #else
 389 #define BOOT_TARGET_DEVICES_MMC_EXTRA(func)
 390 #endif
 391 #else
 392 #define BOOT_TARGET_DEVICES_MMC(func)
 393 #define BOOT_TARGET_DEVICES_MMC_EXTRA(func)
 394 #endif
 395
 396 #ifdef CONFIG_AHCI
 397 #define BOOT_TARGET_DEVICES_SCSI(func) func(SCSI, scsi, 0)
 398 #else
 399 #define BOOT_TARGET_DEVICES_SCSI(func)
 400 #endif
 401
 402 #ifdef CONFIG_USB_STORAGE
 403 #define BOOT_TARGET_DEVICES_USB(func) func(USB, usb, 0)
 404 #else
 405 #define BOOT_TARGET_DEVICES_USB(func)
 406 #endif
 407
 408 /* FEL boot support, auto-execute boot.scr if a script address was provided */
 409 #define BOOTENV_DEV_FEL(devtypeu, devtypel, instance) \
 410         "bootcmd_fel=" \
 411                 "if test -n ${fel_booted} && test -n ${fel_scriptaddr}; then " \
 412                         "echo '(FEL boot)'; " \
 413                         "source ${fel_scriptaddr}; " \
 414                 "fi\0"
 415 #define BOOTENV_DEV_NAME_FEL(devtypeu, devtypel, instance) \
 416         "fel "
 417
 418 #define BOOT_TARGET_DEVICES(func) \
 419         func(FEL, fel, na) \
 420         BOOT_TARGET_DEVICES_MMC(func) \
 421         BOOT_TARGET_DEVICES_MMC_EXTRA(func) \
 422         BOOT_TARGET_DEVICES_SCSI(func) \
 423         BOOT_TARGET_DEVICES_USB(func) \
 424         func(PXE, pxe, na) \
 425         func(DHCP, dhcp, na)
 426
 427 #ifdef CONFIG_OLD_SUNXI_KERNEL_COMPAT
 428 #define BOOTCMD_SUNXI_COMPAT \
 429         "bootcmd_sunxi_compat=" \
 430                 "setenv root /dev/mmcblk0p3 rootwait; " \
 431                 "if ext2load mmc 0 0x44000000 uEnv.txt; then " \
 432                         "echo Loaded environment from uEnv.txt; " \
 433                         "env import -t 0x44000000 ${filesize}; " \
 434                 "fi; " \
 435                 "setenv bootargs console=${console} root=${root} ${extraargs}; " \
 436                 "ext2load mmc 0 0x43000000 script.bin && " \
 437                 "ext2load mmc 0 0x48000000 uImage && " \
 438                 "bootm 0x48000000\0"
 439 #else
 440 #define BOOTCMD_SUNXI_COMPAT
 441 #endif
 442
 443 #include <config_distro_bootcmd.h>
 444
 445 #ifdef CONFIG_USB_KEYBOARD
 446 #define CONSOLE_STDIN_SETTINGS \
 447         "preboot=usb start\0" \
 448         "stdin=serial,usbkbd\0"
 449 #else
 450 #define CONSOLE_STDIN_SETTINGS \
 451         "stdin=serial\0"
 452 #endif
 453
 454 #ifdef CONFIG_VIDEO
 455 #define CONSOLE_STDOUT_SETTINGS \
 456         "stdout=serial,vga\0" \
 457         "stderr=serial,vga\0"
 458 #else
 459 #define CONSOLE_STDOUT_SETTINGS \
 460         "stdout=serial\0" \
 461         "stderr=serial\0"
 462 #endif
 463
 464 #define CONSOLE_ENV_SETTINGS \
 465         CONSOLE_STDIN_SETTINGS \
 466         CONSOLE_STDOUT_SETTINGS
 467
 468 #define CONFIG_EXTRA_ENV_SETTINGS \
 469         CONSOLE_ENV_SETTINGS \
 470         MEM_LAYOUT_ENV_SETTINGS \
 471         DFU_ALT_INFO_RAM \
 472         "fdtfile=" CONFIG_DEFAULT_DEVICE_TREE ".dtb\0" \
 473         "console=ttyS0,115200\0" \
 474         BOOTCMD_SUNXI_COMPAT \
 475         BOOTENV
 476
 477 #else /* ifndef CONFIG_SPL_BUILD */
 478 #define CONFIG_EXTRA_ENV_SETTINGS
 479 #endif
 480
 481 #endif /* _SUNXI_COMMON_CONFIG_H */