include/configs/sunxi-common.h

   1 /*
   2  * (C) Copyright 2012-2012 Henrik Nordstrom <henrik@henriknordstrom.net>
   3  *
   4  * (C) Copyright 2007-2011
   5  * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
   6  * Tom Cubie <tangliang@allwinnertech.com>
   7  *
   8  * Configuration settings for the Allwinner sunxi series of boards.
   9  *
  10  * SPDX-License-Identifier:     GPL-2.0+
  11  */
  12
  13 #ifndef _SUNXI_COMMON_CONFIG_H
  14 #define _SUNXI_COMMON_CONFIG_H
  15
  16 #include <asm/arch/cpu.h>
  17 #include <linux/stringify.h>
  18
  19 #ifdef CONFIG_OLD_SUNXI_KERNEL_COMPAT
  20 /*
  21  * The U-Boot workarounds bugs in the outdated buggy sunxi-3.4 kernels at the
  22  * expense of restricting some features, so the regular machine id values can
  23  * be used.
  24  */
  25 # define CONFIG_MACH_TYPE_COMPAT_REV    0
  26 #else
  27 /*
  28  * A compatibility guard to prevent loading outdated buggy sunxi-3.4 kernels.
  29  * Only sunxi-3.4 kernels with appropriate fixes applied are able to pass
  30  * beyond the machine id check.
  31  */
  32 # define CONFIG_MACH_TYPE_COMPAT_REV    1
  33 #endif
  34
  35 #ifdef CONFIG_ARM64
  36 #define CONFIG_BUILD_TARGET "u-boot.itb"
  37 #endif
  38
  39 /* Serial & console */
  40 #define CONFIG_SYS_NS16550_SERIAL
  41 /* ns16550 reg in the low bits of cpu reg */
  42 #define CONFIG_SYS_NS16550_CLK          24000000
  43 #ifndef CONFIG_DM_SERIAL
  44 # define CONFIG_SYS_NS16550_REG_SIZE    -4
  45 # define CONFIG_SYS_NS16550_COM1                SUNXI_UART0_BASE
  46 # define CONFIG_SYS_NS16550_COM2                SUNXI_UART1_BASE
  47 # define CONFIG_SYS_NS16550_COM3                SUNXI_UART2_BASE
  48 # define CONFIG_SYS_NS16550_COM4                SUNXI_UART3_BASE
  49 # define CONFIG_SYS_NS16550_COM5                SUNXI_R_UART_BASE
  50 #endif
  51
  52 /* CPU */
  53 #define COUNTER_FREQUENCY               24000000
  54
  55 /*
  56  * The DRAM Base differs between some models. We cannot use macros for the
  57  * CONFIG_FOO defines which contain the DRAM base address since they end
  58  * up unexpanded in include/autoconf.mk .
  59  *
  60  * So we have to have this #ifdef #else #endif block for these.
  61  */
  62 #ifdef CONFIG_MACH_SUN9I
  63 #define SDRAM_OFFSET(x) 0x2##x
  64 #define CONFIG_SYS_SDRAM_BASE           0x20000000
  65 #define CONFIG_SYS_LOAD_ADDR            0x22000000 /* default load address */
  66 #define CONFIG_SYS_TEXT_BASE            0x2a000000
  67 /* Note SPL_STACK_R_ADDR is set through Kconfig, we include it here
  68  * since it needs to fit in with the other values. By also #defining it
  69  * we get warnings if the Kconfig value mismatches. */
  70 #define CONFIG_SPL_STACK_R_ADDR         0x2fe00000
  71 #define CONFIG_SPL_BSS_START_ADDR       0x2ff80000
  72 #else
  73 #define SDRAM_OFFSET(x) 0x4##x
  74 #define CONFIG_SYS_SDRAM_BASE           0x40000000
  75 #define CONFIG_SYS_LOAD_ADDR            0x42000000 /* default load address */
  76 /* V3s do not have enough memory to place code at 0x4a000000 */
  77 #ifndef CONFIG_MACH_SUN8I_V3S
  78 #define CONFIG_SYS_TEXT_BASE            0x4a000000
  79 #else
  80 #define CONFIG_SYS_TEXT_BASE            0x42e00000
  81 #endif
  82 /* Note SPL_STACK_R_ADDR is set through Kconfig, we include it here
  83  * since it needs to fit in with the other values. By also #defining it
  84  * we get warnings if the Kconfig value mismatches. */
  85 #define CONFIG_SPL_STACK_R_ADDR         0x4fe00000
  86 #define CONFIG_SPL_BSS_START_ADDR       0x4ff80000
  87 #endif
  88
  89 #define CONFIG_SPL_BSS_MAX_SIZE         0x00080000 /* 512 KiB */
  90
  91 #ifdef CONFIG_SUNXI_HIGH_SRAM
  92 /*
  93  * The A80's A1 sram starts at 0x00010000 rather then at 0x00000000 and is
  94  * slightly bigger. Note that it is possible to map the first 32 KiB of the
  95  * A1 at 0x00000000 like with older SoCs by writing 0x16aa0001 to the
  96  * undocumented 0x008000e0 SYS_CTRL register. Where the 16aa is a key and
  97  * the 1 actually activates the mapping of the first 32 KiB to 0x00000000.
  98  */
  99 #define CONFIG_SYS_INIT_RAM_ADDR        0x10000
 100 #define CONFIG_SYS_INIT_RAM_SIZE        0x08000 /* FIXME: 40 KiB ? */
 101 #else
 102 #define CONFIG_SYS_INIT_RAM_ADDR        0x0
 103 #define CONFIG_SYS_INIT_RAM_SIZE        0x8000  /* 32 KiB */
 104 #endif
 105
 106 #define CONFIG_SYS_INIT_SP_OFFSET \
 107         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 108 #define CONFIG_SYS_INIT_SP_ADDR \
 109         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 110
 111 #define CONFIG_NR_DRAM_BANKS            1
 112 #define PHYS_SDRAM_0                    CONFIG_SYS_SDRAM_BASE
 113 #define PHYS_SDRAM_0_SIZE               0x80000000 /* 2 GiB */
 114
 115 #ifdef CONFIG_AHCI
 116 #define CONFIG_LIBATA
 117 #define CONFIG_SCSI_AHCI
 118 #define CONFIG_SCSI_AHCI_PLAT
 119 #define CONFIG_SUNXI_AHCI
 120 #define CONFIG_SYS_64BIT_LBA
 121 #define CONFIG_SYS_SCSI_MAX_SCSI_ID     1
 122 #define CONFIG_SYS_SCSI_MAX_LUN         1
 123 #define CONFIG_SYS_SCSI_MAX_DEVICE      (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
 124                                          CONFIG_SYS_SCSI_MAX_LUN)
 125 #endif
 126
 127 #define CONFIG_SETUP_MEMORY_TAGS
 128 #define CONFIG_CMDLINE_TAG
 129 #define CONFIG_INITRD_TAG
 130 #define CONFIG_SERIAL_TAG
 131
 132 #ifdef CONFIG_NAND_SUNXI
 133 #define CONFIG_SYS_NAND_MAX_ECCPOS 1664
 134 #define CONFIG_SYS_NAND_ONFI_DETECTION
 135 #define CONFIG_SYS_MAX_NAND_DEVICE 8
 136
 137 #define CONFIG_MTD_DEVICE
 138 #define CONFIG_MTD_PARTITIONS
 139 #endif
 140
 141 #ifdef CONFIG_SPL_SPI_SUNXI
 142 #define CONFIG_SYS_SPI_U_BOOT_OFFS      0x8000
 143 #endif
 144
 145 /* mmc config */
 146 #ifdef CONFIG_MMC
 147 #define CONFIG_MMC_SUNXI_SLOT           0
 148 #endif
 149
 150 #if defined(CONFIG_ENV_IS_IN_MMC)
 151 #define CONFIG_SYS_MMC_ENV_DEV          0       /* first detected MMC controller */
 152 #define CONFIG_SYS_MMC_MAX_DEVICE       4
 153 #elif defined(CONFIG_ENV_IS_NOWHERE)
 154 #define CONFIG_ENV_SIZE                 (128 << 10)
 155 #endif
 156
 157 #ifndef CONFIG_MACH_SUN8I_V3S
 158 /* 64MB of malloc() pool */
 159 #define CONFIG_SYS_MALLOC_LEN           (CONFIG_ENV_SIZE + (64 << 20))
 160 #else
 161 /* 2MB of malloc() pool */
 162 #define CONFIG_SYS_MALLOC_LEN           (CONFIG_ENV_SIZE + (2 << 20))
 163 #endif
 164
 165 /*
 166  * Miscellaneous configurable options
 167  */
 168 #define CONFIG_SYS_CBSIZE       1024    /* Console I/O Buffer Size */
 169 #define CONFIG_SYS_PBSIZE       1024    /* Print Buffer Size */
 170
 171 /* Boot Argument Buffer Size */
 172 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE
 173
 174 /* standalone support */
 175 #define CONFIG_STANDALONE_LOAD_ADDR     CONFIG_SYS_LOAD_ADDR
 176
 177 /* FLASH and environment organization */
 178
 179 #define CONFIG_SYS_MONITOR_LEN          (768 << 10)     /* 768 KiB */
 180
 181 #define CONFIG_SPL_FRAMEWORK
 182
 183 #ifndef CONFIG_ARM64            /* AArch64 FEL support is not ready yet */
 184 #define CONFIG_SPL_BOARD_LOAD_IMAGE
 185 #endif
 186
 187 #ifdef CONFIG_SUNXI_HIGH_SRAM
 188 #define CONFIG_SPL_TEXT_BASE            0x10060         /* sram start+header */
 189 #define CONFIG_SPL_MAX_SIZE             0x7fa0          /* 32 KiB */
 190 #ifdef CONFIG_ARM64
 191 /* end of SRAM A2 for now, as SRAM A1 is pretty tight for an ARM64 build */
 192 #define LOW_LEVEL_SRAM_STACK            0x00054000
 193 #else
 194 #define LOW_LEVEL_SRAM_STACK            0x00018000
 195 #endif /* !CONFIG_ARM64 */
 196 #else
 197 #define CONFIG_SPL_TEXT_BASE            0x60            /* sram start+header */
 198 #define CONFIG_SPL_MAX_SIZE             0x5fa0          /* 24KB on sun4i/sun7i */
 199 #define LOW_LEVEL_SRAM_STACK            0x00008000      /* End of sram */
 200 #endif
 201
 202 #define CONFIG_SPL_STACK                LOW_LEVEL_SRAM_STACK
 203
 204 #define CONFIG_SPL_PAD_TO               32768           /* decimal for 'dd' */
 205
 206
 207 /* I2C */
 208 #if defined CONFIG_AXP152_POWER || defined CONFIG_AXP209_POWER || \
 209     defined CONFIG_SY8106A_POWER
 210 #endif
 211
 212 #if defined CONFIG_I2C0_ENABLE || defined CONFIG_I2C1_ENABLE || \
 213     defined CONFIG_I2C2_ENABLE || defined CONFIG_I2C3_ENABLE || \
 214     defined CONFIG_I2C4_ENABLE || defined CONFIG_R_I2C_ENABLE
 215 #define CONFIG_SYS_I2C_MVTWSI
 216 #ifndef CONFIG_DM_I2C
 217 #define CONFIG_SYS_I2C
 218 #define CONFIG_SYS_I2C_SPEED            400000
 219 #define CONFIG_SYS_I2C_SLAVE            0x7f
 220 #endif
 221 #endif
 222
 223 #if defined CONFIG_VIDEO_LCD_PANEL_I2C && !(defined CONFIG_SPL_BUILD)
 224 #define CONFIG_SYS_I2C_SOFT
 225 #define CONFIG_SYS_I2C_SOFT_SPEED       50000
 226 #define CONFIG_SYS_I2C_SOFT_SLAVE       0x00
 227 /* We use pin names in Kconfig and sunxi_name_to_gpio() */
 228 #define CONFIG_SOFT_I2C_GPIO_SDA        soft_i2c_gpio_sda
 229 #define CONFIG_SOFT_I2C_GPIO_SCL        soft_i2c_gpio_scl
 230 #ifndef __ASSEMBLY__
 231 extern int soft_i2c_gpio_sda;
 232 extern int soft_i2c_gpio_scl;
 233 #endif
 234 #define CONFIG_VIDEO_LCD_I2C_BUS        0 /* The lcd panel soft i2c is bus 0 */
 235 #define CONFIG_SYS_SPD_BUS_NUM          1 /* And the axp209 i2c bus is bus 1 */
 236 #else
 237 #define CONFIG_SYS_SPD_BUS_NUM          0 /* The axp209 i2c bus is bus 0 */
 238 #define CONFIG_VIDEO_LCD_I2C_BUS        -1 /* NA, but necessary to compile */
 239 #endif
 240
 241 /* PMU */
 242 #if defined CONFIG_AXP152_POWER || defined CONFIG_AXP209_POWER || \
 243     defined CONFIG_AXP221_POWER || defined CONFIG_AXP818_POWER || \
 244     defined CONFIG_SY8106A_POWER
 245 #endif
 246
 247 #ifdef CONFIG_REQUIRE_SERIAL_CONSOLE
 248 #if CONFIG_CONS_INDEX == 1
 249 #ifdef CONFIG_MACH_SUN9I
 250 #define OF_STDOUT_PATH          "/soc/serial@07000000:115200"
 251 #else
 252 #define OF_STDOUT_PATH          "/soc@01c00000/serial@01c28000:115200"
 253 #endif
 254 #elif CONFIG_CONS_INDEX == 2 && defined(CONFIG_MACH_SUN5I)
 255 #define OF_STDOUT_PATH          "/soc@01c00000/serial@01c28400:115200"
 256 #elif CONFIG_CONS_INDEX == 3 && defined(CONFIG_MACH_SUN8I)
 257 #define OF_STDOUT_PATH          "/soc@01c00000/serial@01c28800:115200"
 258 #elif CONFIG_CONS_INDEX == 5 && defined(CONFIG_MACH_SUN8I)
 259 #define OF_STDOUT_PATH          "/soc@01c00000/serial@01f02800:115200"
 260 #else
 261 #error Unsupported console port nr. Please fix stdout-path in sunxi-common.h.
 262 #endif
 263 #endif /* ifdef CONFIG_REQUIRE_SERIAL_CONSOLE */
 264
 265 /* GPIO */
 266 #define CONFIG_SUNXI_GPIO
 267
 268 #ifdef CONFIG_VIDEO
 269 /*
 270  * The amount of RAM to keep free at the top of RAM when relocating u-boot,
 271  * to use as framebuffer. This must be a multiple of 4096.
 272  */
 273 #define CONFIG_SUNXI_MAX_FB_SIZE (16 << 20)
 274
 275 /* Do we want to initialize a simple FB? */
 276 #define CONFIG_VIDEO_DT_SIMPLEFB
 277
 278 #define CONFIG_VIDEO_SUNXI
 279
 280 #define CONFIG_VIDEO_LOGO
 281 #define CONFIG_VIDEO_STD_TIMINGS
 282 #define CONFIG_I2C_EDID
 283 #define VIDEO_LINE_LEN (pGD->plnSizeX)
 284
 285 /* allow both serial and cfb console. */
 286 /* stop x86 thinking in cfbconsole from trying to init a pc keyboard */
 287
 288 #endif /* CONFIG_VIDEO */
 289
 290 /* Ethernet support */
 291 #ifdef CONFIG_SUNXI_EMAC
 292 #define CONFIG_PHY_ADDR         1
 293 #define CONFIG_MII                      /* MII PHY management           */
 294 #endif
 295
 296 #ifdef CONFIG_SUN7I_GMAC
 297 #define CONFIG_PHY_ADDR         1
 298 #define CONFIG_MII                      /* MII PHY management           */
 299 #define CONFIG_PHY_REALTEK
 300 #endif
 301
 302 #ifdef CONFIG_USB_EHCI_HCD
 303 #define CONFIG_USB_OHCI_NEW
 304 #define CONFIG_USB_OHCI_SUNXI
 305 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 1
 306 #endif
 307
 308 #ifdef CONFIG_USB_MUSB_SUNXI
 309 #define CONFIG_USB_MUSB_PIO_ONLY
 310 #endif
 311
 312 #ifdef CONFIG_USB_MUSB_GADGET
 313 #define CONFIG_USB_FUNCTION_MASS_STORAGE
 314 #endif
 315
 316 #ifdef CONFIG_USB_FUNCTION_MASS_STORAGE
 317 #endif
 318
 319 #ifdef CONFIG_USB_KEYBOARD
 320 #define CONFIG_PREBOOT
 321 #endif
 322
 323 #define CONFIG_MISC_INIT_R
 324
 325 #ifndef CONFIG_SPL_BUILD
 326 #include <config_distro_defaults.h>
 327
 328 #ifdef CONFIG_ARM64
 329 /*
 330  * Boards seem to come with at least 512MB of DRAM.
 331  * The kernel should go at 512K, which is the default text offset (that will
 332  * be adjusted at runtime if needed).
 333  * There is no compression for arm64 kernels (yet), so leave some space
 334  * for really big kernels, say 256MB for now.
 335  * Scripts, PXE and DTBs should go afterwards, leaving the rest for the initrd.
 336  * Align the initrd to a 2MB page.
 337  */
 338 #define BOOTM_SIZE      __stringify(0xa000000)
 339 #define KERNEL_ADDR_R   __stringify(SDRAM_OFFSET(0080000))
 340 #define FDT_ADDR_R      __stringify(SDRAM_OFFSET(FA00000))
 341 #define SCRIPT_ADDR_R   __stringify(SDRAM_OFFSET(FC00000))
 342 #define PXEFILE_ADDR_R  __stringify(SDRAM_OFFSET(FD00000))
 343 #define RAMDISK_ADDR_R  __stringify(SDRAM_OFFSET(FE00000))
 344
 345 #else
 346 /*
 347  * 160M RAM (256M minimum minus 64MB heap + 32MB for u-boot, stack, fb, etc.
 348  * 32M uncompressed kernel, 16M compressed kernel, 1M fdt,
 349  * 1M script, 1M pxe and the ramdisk at the end.
 350  */
 351 #ifndef CONFIG_MACH_SUN8I_V3S
 352 #define BOOTM_SIZE     __stringify(0xa000000)
 353 #define KERNEL_ADDR_R  __stringify(SDRAM_OFFSET(2000000))
 354 #define FDT_ADDR_R     __stringify(SDRAM_OFFSET(3000000))
 355 #define SCRIPT_ADDR_R  __stringify(SDRAM_OFFSET(3100000))
 356 #define PXEFILE_ADDR_R __stringify(SDRAM_OFFSET(3200000))
 357 #define RAMDISK_ADDR_R __stringify(SDRAM_OFFSET(3300000))
 358 #else
 359 /*
 360  * 64M RAM minus 2MB heap + 16MB for u-boot, stack, fb, etc.
 361  * 16M uncompressed kernel, 8M compressed kernel, 1M fdt,
 362  * 1M script, 1M pxe and the ramdisk at the end.
 363  */
 364 #define BOOTM_SIZE     __stringify(0x2e00000)
 365 #define KERNEL_ADDR_R  __stringify(SDRAM_OFFSET(1000000))
 366 #define FDT_ADDR_R     __stringify(SDRAM_OFFSET(1800000))
 367 #define SCRIPT_ADDR_R  __stringify(SDRAM_OFFSET(1900000))
 368 #define PXEFILE_ADDR_R __stringify(SDRAM_OFFSET(1A00000))
 369 #define RAMDISK_ADDR_R __stringify(SDRAM_OFFSET(1B00000))
 370 #endif
 371 #endif
 372
 373 #define MEM_LAYOUT_ENV_SETTINGS \
 374         "bootm_size=" BOOTM_SIZE "\0" \
 375         "kernel_addr_r=" KERNEL_ADDR_R "\0" \
 376         "fdt_addr_r=" FDT_ADDR_R "\0" \
 377         "scriptaddr=" SCRIPT_ADDR_R "\0" \
 378         "pxefile_addr_r=" PXEFILE_ADDR_R "\0" \
 379         "ramdisk_addr_r=" RAMDISK_ADDR_R "\0"
 380
 381 #define DFU_ALT_INFO_RAM \
 382         "dfu_alt_info_ram=" \
 383         "kernel ram " KERNEL_ADDR_R " 0x1000000;" \
 384         "fdt ram " FDT_ADDR_R " 0x100000;" \
 385         "ramdisk ram " RAMDISK_ADDR_R " 0x4000000\0"
 386
 387 #ifdef CONFIG_MMC
 388 #define BOOT_TARGET_DEVICES_MMC(func) func(MMC, mmc, 0)
 389 #if CONFIG_MMC_SUNXI_SLOT_EXTRA != -1
 390 #define BOOT_TARGET_DEVICES_MMC_EXTRA(func) func(MMC, mmc, 1)
 391 #else
 392 #define BOOT_TARGET_DEVICES_MMC_EXTRA(func)
 393 #endif
 394 #else
 395 #define BOOT_TARGET_DEVICES_MMC(func)
 396 #define BOOT_TARGET_DEVICES_MMC_EXTRA(func)
 397 #endif
 398
 399 #ifdef CONFIG_AHCI
 400 #define BOOT_TARGET_DEVICES_SCSI(func) func(SCSI, scsi, 0)
 401 #else
 402 #define BOOT_TARGET_DEVICES_SCSI(func)
 403 #endif
 404
 405 #ifdef CONFIG_USB_STORAGE
 406 #define BOOT_TARGET_DEVICES_USB(func) func(USB, usb, 0)
 407 #else
 408 #define BOOT_TARGET_DEVICES_USB(func)
 409 #endif
 410
 411 /* FEL boot support, auto-execute boot.scr if a script address was provided */
 412 #define BOOTENV_DEV_FEL(devtypeu, devtypel, instance) \
 413         "bootcmd_fel=" \
 414                 "if test -n ${fel_booted} && test -n ${fel_scriptaddr}; then " \
 415                         "echo '(FEL boot)'; " \
 416                         "source ${fel_scriptaddr}; " \
 417                 "fi\0"
 418 #define BOOTENV_DEV_NAME_FEL(devtypeu, devtypel, instance) \
 419         "fel "
 420
 421 #define BOOT_TARGET_DEVICES(func) \
 422         func(FEL, fel, na) \
 423         BOOT_TARGET_DEVICES_MMC(func) \
 424         BOOT_TARGET_DEVICES_MMC_EXTRA(func) \
 425         BOOT_TARGET_DEVICES_SCSI(func) \
 426         BOOT_TARGET_DEVICES_USB(func) \
 427         func(PXE, pxe, na) \
 428         func(DHCP, dhcp, na)
 429
 430 #ifdef CONFIG_OLD_SUNXI_KERNEL_COMPAT
 431 #define BOOTCMD_SUNXI_COMPAT \
 432         "bootcmd_sunxi_compat=" \
 433                 "setenv root /dev/mmcblk0p3 rootwait; " \
 434                 "if ext2load mmc 0 0x44000000 uEnv.txt; then " \
 435                         "echo Loaded environment from uEnv.txt; " \
 436                         "env import -t 0x44000000 ${filesize}; " \
 437                 "fi; " \
 438                 "setenv bootargs console=${console} root=${root} ${extraargs}; " \
 439                 "ext2load mmc 0 0x43000000 script.bin && " \
 440                 "ext2load mmc 0 0x48000000 uImage && " \
 441                 "bootm 0x48000000\0"
 442 #else
 443 #define BOOTCMD_SUNXI_COMPAT
 444 #endif
 445
 446 #include <config_distro_bootcmd.h>
 447
 448 #ifdef CONFIG_USB_KEYBOARD
 449 #define CONSOLE_STDIN_SETTINGS \
 450         "preboot=usb start\0" \
 451         "stdin=serial,usbkbd\0"
 452 #else
 453 #define CONSOLE_STDIN_SETTINGS \
 454         "stdin=serial\0"
 455 #endif
 456
 457 #ifdef CONFIG_VIDEO
 458 #define CONSOLE_STDOUT_SETTINGS \
 459         "stdout=serial,vga\0" \
 460         "stderr=serial,vga\0"
 461 #elif CONFIG_DM_VIDEO
 462 #define CONFIG_SYS_WHITE_ON_BLACK
 463 #define CONSOLE_STDOUT_SETTINGS \
 464         "stdout=serial,vidconsole\0" \
 465         "stderr=serial,vidconsole\0"
 466 #else
 467 #define CONSOLE_STDOUT_SETTINGS \
 468         "stdout=serial\0" \
 469         "stderr=serial\0"
 470 #endif
 471
 472 #ifdef CONFIG_MTDIDS_DEFAULT
 473 #define SUNXI_MTDIDS_DEFAULT \
 474         "mtdids=" CONFIG_MTDIDS_DEFAULT "\0"
 475 #else
 476 #define SUNXI_MTDIDS_DEFAULT
 477 #endif
 478
 479 #ifdef CONFIG_MTDPARTS_DEFAULT
 480 #define SUNXI_MTDPARTS_DEFAULT \
 481         "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0"
 482 #else
 483 #define SUNXI_MTDPARTS_DEFAULT
 484 #endif
 485
 486 #define CONSOLE_ENV_SETTINGS \
 487         CONSOLE_STDIN_SETTINGS \
 488         CONSOLE_STDOUT_SETTINGS
 489
 490 #ifdef CONFIG_ARM64
 491 #define FDTFILE "allwinner/" CONFIG_DEFAULT_DEVICE_TREE ".dtb"
 492 #else
 493 #define FDTFILE CONFIG_DEFAULT_DEVICE_TREE ".dtb"
 494 #endif
 495
 496 #define CONFIG_EXTRA_ENV_SETTINGS \
 497         CONSOLE_ENV_SETTINGS \
 498         MEM_LAYOUT_ENV_SETTINGS \
 499         DFU_ALT_INFO_RAM \
 500         "fdtfile=" FDTFILE "\0" \
 501         "console=ttyS0,115200\0" \
 502         SUNXI_MTDIDS_DEFAULT \
 503         SUNXI_MTDPARTS_DEFAULT \
 504         BOOTCMD_SUNXI_COMPAT \
 505         BOOTENV
 506
 507 #else /* ifndef CONFIG_SPL_BUILD */
 508 #define CONFIG_EXTRA_ENV_SETTINGS
 509 #endif
 510
 511 #endif /* _SUNXI_COMMON_CONFIG_H */