include/configs/sunxi-common.h

   1 /*
   2  * (C) Copyright 2012-2012 Henrik Nordstrom <henrik@henriknordstrom.net>
   3  *
   4  * (C) Copyright 2007-2011
   5  * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
   6  * Tom Cubie <tangliang@allwinnertech.com>
   7  *
   8  * Configuration settings for the Allwinner sunxi series of boards.
   9  *
  10  * SPDX-License-Identifier:     GPL-2.0+
  11  */
  12
  13 #ifndef _SUNXI_COMMON_CONFIG_H
  14 #define _SUNXI_COMMON_CONFIG_H
  15
  16 #include <asm/arch/cpu.h>
  17 #include <linux/stringify.h>
  18
  19 #ifdef CONFIG_OLD_SUNXI_KERNEL_COMPAT
  20 /*
  21  * The U-Boot workarounds bugs in the outdated buggy sunxi-3.4 kernels at the
  22  * expense of restricting some features, so the regular machine id values can
  23  * be used.
  24  */
  25 # define CONFIG_MACH_TYPE_COMPAT_REV    0
  26 #else
  27 /*
  28  * A compatibility guard to prevent loading outdated buggy sunxi-3.4 kernels.
  29  * Only sunxi-3.4 kernels with appropriate fixes applied are able to pass
  30  * beyond the machine id check.
  31  */
  32 # define CONFIG_MACH_TYPE_COMPAT_REV    1
  33 #endif
  34
  35 /*
  36  * High Level Configuration Options
  37  */
  38 #define CONFIG_SUNXI            /* sunxi family */
  39 #ifdef CONFIG_SPL_BUILD
  40 #define CONFIG_SYS_THUMB_BUILD  /* Thumbs mode to save space in SPL */
  41 #endif
  42
  43 /* Serial & console */
  44 #define CONFIG_SYS_NS16550
  45 #define CONFIG_SYS_NS16550_SERIAL
  46 /* ns16550 reg in the low bits of cpu reg */
  47 #define CONFIG_SYS_NS16550_CLK          24000000
  48 #ifdef CONFIG_DM_SERIAL
  49 # define CONFIG_DW_SERIAL
  50 #else
  51 # define CONFIG_SYS_NS16550_REG_SIZE    -4
  52 # define CONFIG_SYS_NS16550_COM1                SUNXI_UART0_BASE
  53 # define CONFIG_SYS_NS16550_COM2                SUNXI_UART1_BASE
  54 # define CONFIG_SYS_NS16550_COM3                SUNXI_UART2_BASE
  55 # define CONFIG_SYS_NS16550_COM4                SUNXI_UART3_BASE
  56 # define CONFIG_SYS_NS16550_COM5                SUNXI_R_UART_BASE
  57 #endif
  58
  59 /* CPU */
  60 #define CONFIG_DISPLAY_CPUINFO
  61 #define CONFIG_SYS_CACHELINE_SIZE       64
  62
  63 /*
  64  * The DRAM Base differs between some models. We cannot use macros for the
  65  * CONFIG_FOO defines which contain the DRAM base address since they end
  66  * up unexpanded in include/autoconf.mk .
  67  *
  68  * So we have to have this #ifdef #else #endif block for these.
  69  */
  70 #ifdef CONFIG_MACH_SUN9I
  71 #define SDRAM_OFFSET(x) 0x2##x
  72 #define CONFIG_SYS_SDRAM_BASE           0x20000000
  73 #define CONFIG_SYS_LOAD_ADDR            0x22000000 /* default load address */
  74 #define CONFIG_SYS_TEXT_BASE            0x2a000000
  75 #define CONFIG_PRE_CON_BUF_ADDR         0x2f000000
  76 /* Note SPL_STACK_R_ADDR is set through Kconfig, we include it here
  77  * since it needs to fit in with the other values. By also #defining it
  78  * we get warnings if the Kconfig value mismatches. */
  79 #define CONFIG_SPL_STACK_R_ADDR         0x2fe00000
  80 #define CONFIG_SPL_BSS_START_ADDR       0x2ff80000
  81 #else
  82 #define SDRAM_OFFSET(x) 0x4##x
  83 #define CONFIG_SYS_SDRAM_BASE           0x40000000
  84 #define CONFIG_SYS_LOAD_ADDR            0x42000000 /* default load address */
  85 #define CONFIG_SYS_TEXT_BASE            0x4a000000
  86 #define CONFIG_PRE_CON_BUF_ADDR         0x4f000000
  87 /* Note SPL_STACK_R_ADDR is set through Kconfig, we include it here
  88  * since it needs to fit in with the other values. By also #defining it
  89  * we get warnings if the Kconfig value mismatches. */
  90 #define CONFIG_SPL_STACK_R_ADDR         0x4fe00000
  91 #define CONFIG_SPL_BSS_START_ADDR       0x4ff80000
  92 #endif
  93
  94 #define CONFIG_SPL_BSS_MAX_SIZE         0x00080000 /* 512 KiB */
  95
  96 #ifdef CONFIG_MACH_SUN9I
  97 /*
  98  * The A80's A1 sram starts at 0x00010000 rather then at 0x00000000 and is
  99  * slightly bigger. Note that it is possible to map the first 32 KiB of the
 100  * A1 at 0x00000000 like with older SoCs by writing 0x16aa0001 to the
 101  * undocumented 0x008000e0 SYS_CTRL register. Where the 16aa is a key and
 102  * the 1 actually activates the mapping of the first 32 KiB to 0x00000000.
 103  */
 104 #define CONFIG_SYS_INIT_RAM_ADDR        0x10000
 105 #define CONFIG_SYS_INIT_RAM_SIZE        0x0a000 /* 40 KiB */
 106 #else
 107 #define CONFIG_SYS_INIT_RAM_ADDR        0x0
 108 #define CONFIG_SYS_INIT_RAM_SIZE        0x8000  /* 32 KiB */
 109 #endif
 110
 111 #define CONFIG_SYS_INIT_SP_OFFSET \
 112         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 113 #define CONFIG_SYS_INIT_SP_ADDR \
 114         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 115
 116 #define CONFIG_NR_DRAM_BANKS            1
 117 #define PHYS_SDRAM_0                    CONFIG_SYS_SDRAM_BASE
 118 #define PHYS_SDRAM_0_SIZE               0x80000000 /* 2 GiB */
 119
 120 #ifdef CONFIG_AHCI
 121 #define CONFIG_LIBATA
 122 #define CONFIG_SCSI_AHCI
 123 #define CONFIG_SCSI_AHCI_PLAT
 124 #define CONFIG_SUNXI_AHCI
 125 #define CONFIG_SYS_64BIT_LBA
 126 #define CONFIG_SYS_SCSI_MAX_SCSI_ID     1
 127 #define CONFIG_SYS_SCSI_MAX_LUN         1
 128 #define CONFIG_SYS_SCSI_MAX_DEVICE      (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
 129                                          CONFIG_SYS_SCSI_MAX_LUN)
 130 #define CONFIG_CMD_SCSI
 131 #endif
 132
 133 #define CONFIG_SETUP_MEMORY_TAGS
 134 #define CONFIG_CMDLINE_TAG
 135 #define CONFIG_INITRD_TAG
 136 #define CONFIG_SERIAL_TAG
 137
 138 #ifdef CONFIG_NAND_SUNXI
 139 #define CONFIG_SPL_NAND_SUPPORT 1
 140 #endif
 141
 142 /* mmc config */
 143 #ifdef CONFIG_MMC
 144 #define CONFIG_GENERIC_MMC
 145 #define CONFIG_CMD_MMC
 146 #define CONFIG_MMC_SUNXI
 147 #define CONFIG_MMC_SUNXI_SLOT           0
 148 #define CONFIG_ENV_IS_IN_MMC
 149 #define CONFIG_SYS_MMC_ENV_DEV          0       /* first detected MMC controller */
 150 #endif
 151
 152 /* 64MB of malloc() pool */
 153 #define CONFIG_SYS_MALLOC_LEN           (CONFIG_ENV_SIZE + (64 << 20))
 154
 155 /*
 156  * Miscellaneous configurable options
 157  */
 158 #define CONFIG_SYS_CBSIZE       1024    /* Console I/O Buffer Size */
 159 #define CONFIG_SYS_PBSIZE       1024    /* Print Buffer Size */
 160 #define CONFIG_SYS_MAXARGS      16      /* max number of command args */
 161
 162 /* Boot Argument Buffer Size */
 163 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE
 164
 165 /* standalone support */
 166 #define CONFIG_STANDALONE_LOAD_ADDR     CONFIG_SYS_LOAD_ADDR
 167
 168 /* baudrate */
 169 #define CONFIG_BAUDRATE                 115200
 170
 171 /* The stack sizes are set up in start.S using the settings below */
 172 #define CONFIG_STACKSIZE                (256 << 10)     /* 256 KiB */
 173
 174 /* FLASH and environment organization */
 175
 176 #define CONFIG_SYS_NO_FLASH
 177
 178 #define CONFIG_SYS_MONITOR_LEN          (768 << 10)     /* 768 KiB */
 179 #define CONFIG_IDENT_STRING             " Allwinner Technology"
 180
 181 #define CONFIG_ENV_OFFSET               (544 << 10) /* (8 + 24 + 512) KiB */
 182 #define CONFIG_ENV_SIZE                 (128 << 10)     /* 128 KiB */
 183
 184 #define CONFIG_FAT_WRITE        /* enable write access */
 185
 186 #define CONFIG_SPL_FRAMEWORK
 187 #define CONFIG_SPL_LIBCOMMON_SUPPORT
 188 #define CONFIG_SPL_SERIAL_SUPPORT
 189 #define CONFIG_SPL_LIBGENERIC_SUPPORT
 190
 191 #define CONFIG_SPL_BOARD_LOAD_IMAGE
 192
 193 #define CONFIG_SPL_TEXT_BASE            0x20            /* sram start+header */
 194 #define CONFIG_SPL_MAX_SIZE             0x5fe0          /* 24KB on sun4i/sun7i */
 195
 196 #define CONFIG_SPL_LIBDISK_SUPPORT
 197
 198 #ifdef CONFIG_MMC
 199 #define CONFIG_SPL_MMC_SUPPORT
 200 #endif
 201
 202 #define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv7/sunxi/u-boot-spl.lds"
 203
 204 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 80      /* 40KiB */
 205 #define CONFIG_SPL_PAD_TO               32768           /* decimal for 'dd' */
 206
 207 /* end of 32 KiB in sram */
 208 #define LOW_LEVEL_SRAM_STACK            0x00008000 /* End of sram */
 209 #define CONFIG_SPL_STACK                LOW_LEVEL_SRAM_STACK
 210
 211 /* I2C */
 212 #if defined CONFIG_AXP152_POWER || defined CONFIG_AXP209_POWER
 213 #define CONFIG_SPL_I2C_SUPPORT
 214 #endif
 215
 216 #if defined CONFIG_I2C0_ENABLE || defined CONFIG_I2C1_ENABLE || \
 217     defined CONFIG_I2C2_ENABLE || defined CONFIG_I2C3_ENABLE || \
 218     defined CONFIG_I2C4_ENABLE
 219 #define CONFIG_SYS_I2C
 220 #define CONFIG_SYS_I2C_MVTWSI
 221 #define CONFIG_SYS_I2C_SPEED            400000
 222 #define CONFIG_SYS_I2C_SLAVE            0x7f
 223 #define CONFIG_CMD_I2C
 224 #endif
 225
 226 #if defined CONFIG_VIDEO_LCD_PANEL_I2C && !(defined CONFIG_SPL_BUILD)
 227 #define CONFIG_SYS_I2C_SOFT
 228 #define CONFIG_SYS_I2C_SOFT_SPEED       50000
 229 #define CONFIG_SYS_I2C_SOFT_SLAVE       0x00
 230 /* We use pin names in Kconfig and sunxi_name_to_gpio() */
 231 #define CONFIG_SOFT_I2C_GPIO_SDA        soft_i2c_gpio_sda
 232 #define CONFIG_SOFT_I2C_GPIO_SCL        soft_i2c_gpio_scl
 233 #ifndef __ASSEMBLY__
 234 extern int soft_i2c_gpio_sda;
 235 extern int soft_i2c_gpio_scl;
 236 #endif
 237 #define CONFIG_VIDEO_LCD_I2C_BUS        0 /* The lcd panel soft i2c is bus 0 */
 238 #define CONFIG_SYS_SPD_BUS_NUM          1 /* And the axp209 i2c bus is bus 1 */
 239 #else
 240 #define CONFIG_SYS_SPD_BUS_NUM          0 /* The axp209 i2c bus is bus 0 */
 241 #define CONFIG_VIDEO_LCD_I2C_BUS        -1 /* NA, but necessary to compile */
 242 #endif
 243
 244 /* PMU */
 245 #if defined CONFIG_AXP152_POWER || defined CONFIG_AXP209_POWER || defined CONFIG_AXP221_POWER
 246 #define CONFIG_SPL_POWER_SUPPORT
 247 #endif
 248
 249 #ifndef CONFIG_CONS_INDEX
 250 #define CONFIG_CONS_INDEX              1       /* UART0 */
 251 #endif
 252
 253 #ifdef CONFIG_REQUIRE_SERIAL_CONSOLE
 254 #if CONFIG_CONS_INDEX == 1
 255 #ifdef CONFIG_MACH_SUN9I
 256 #define OF_STDOUT_PATH          "/soc/serial@07000000:115200"
 257 #else
 258 #define OF_STDOUT_PATH          "/soc@01c00000/serial@01c28000:115200"
 259 #endif
 260 #elif CONFIG_CONS_INDEX == 2 && defined(CONFIG_MACH_SUN5I)
 261 #define OF_STDOUT_PATH          "/soc@01c00000/serial@01c28400:115200"
 262 #elif CONFIG_CONS_INDEX == 3 && defined(CONFIG_MACH_SUN8I)
 263 #define OF_STDOUT_PATH          "/soc@01c00000/serial@01c28800:115200"
 264 #elif CONFIG_CONS_INDEX == 5 && defined(CONFIG_MACH_SUN8I)
 265 #define OF_STDOUT_PATH          "/soc@01c00000/serial@01f02800:115200"
 266 #else
 267 #error Unsupported console port nr. Please fix stdout-path in sunxi-common.h.
 268 #endif
 269 #endif /* ifdef CONFIG_REQUIRE_SERIAL_CONSOLE */
 270
 271 /* GPIO */
 272 #define CONFIG_SUNXI_GPIO
 273 #define CONFIG_SPL_GPIO_SUPPORT
 274 #define CONFIG_CMD_GPIO
 275
 276 #ifdef CONFIG_VIDEO
 277 /*
 278  * The amount of RAM to keep free at the top of RAM when relocating u-boot,
 279  * to use as framebuffer. This must be a multiple of 4096.
 280  */
 281 #define CONFIG_SUNXI_MAX_FB_SIZE (16 << 20)
 282
 283 /* Do we want to initialize a simple FB? */
 284 #define CONFIG_VIDEO_DT_SIMPLEFB
 285
 286 #define CONFIG_VIDEO_SUNXI
 287
 288 #define CONFIG_CFB_CONSOLE
 289 #define CONFIG_VIDEO_SW_CURSOR
 290 #define CONFIG_VIDEO_LOGO
 291 #define CONFIG_VIDEO_STD_TIMINGS
 292 #define CONFIG_I2C_EDID
 293 #define VIDEO_LINE_LEN (pGD->plnSizeX)
 294
 295 /* allow both serial and cfb console. */
 296 #define CONFIG_CONSOLE_MUX
 297 /* stop x86 thinking in cfbconsole from trying to init a pc keyboard */
 298 #define CONFIG_VGA_AS_SINGLE_DEVICE
 299
 300 /* To be able to hook simplefb into dt */
 301 #ifdef CONFIG_VIDEO_DT_SIMPLEFB
 302 #define CONFIG_OF_BOARD_SETUP
 303 #endif
 304
 305 #endif /* CONFIG_VIDEO */
 306
 307 /* Ethernet support */
 308 #ifdef CONFIG_SUNXI_EMAC
 309 #define CONFIG_PHY_ADDR         1
 310 #define CONFIG_MII                      /* MII PHY management           */
 311 #define CONFIG_PHYLIB
 312 #endif
 313
 314 #ifdef CONFIG_SUNXI_GMAC
 315 #define CONFIG_DW_AUTONEG
 316 #define CONFIG_PHY_GIGE                 /* GMAC can use gigabit PHY     */
 317 #define CONFIG_PHY_ADDR         1
 318 #define CONFIG_MII                      /* MII PHY management           */
 319 #define CONFIG_PHYLIB
 320 #endif
 321
 322 #ifdef CONFIG_USB_EHCI_HCD
 323 #define CONFIG_USB_OHCI_NEW
 324 #define CONFIG_USB_OHCI_SUNXI
 325 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 1
 326 #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 1
 327 #endif
 328
 329 #ifdef CONFIG_USB_MUSB_SUNXI
 330 #define CONFIG_USB_MUSB_PIO_ONLY
 331 #endif
 332
 333 #ifdef CONFIG_USB_MUSB_GADGET
 334 #define CONFIG_USB_GADGET
 335 #define CONFIG_USB_GADGET_DUALSPEED
 336 #define CONFIG_USB_GADGET_VBUS_DRAW     0
 337
 338 #define CONFIG_USB_GADGET_DOWNLOAD
 339 #define CONFIG_USB_FUNCTION_FASTBOOT
 340 #define CONFIG_USB_FUNCTION_MASS_STORAGE
 341 #endif
 342
 343 #ifdef CONFIG_USB_GADGET_DOWNLOAD
 344 #define CONFIG_G_DNL_VENDOR_NUM         0x1f3a
 345 #define CONFIG_G_DNL_PRODUCT_NUM        0x1010
 346 #define CONFIG_G_DNL_MANUFACTURER       "Allwinner Technology"
 347 #endif
 348
 349 #ifdef CONFIG_USB_FUNCTION_FASTBOOT
 350 #define CONFIG_CMD_FASTBOOT
 351 #define CONFIG_FASTBOOT_BUF_ADDR        CONFIG_SYS_LOAD_ADDR
 352 #define CONFIG_FASTBOOT_BUF_SIZE        0x2000000
 353 #define CONFIG_ANDROID_BOOT_IMAGE
 354
 355 #define CONFIG_FASTBOOT_FLASH
 356
 357 #ifdef CONFIG_MMC
 358 #define CONFIG_FASTBOOT_FLASH_MMC_DEV   0
 359 #define CONFIG_EFI_PARTITION
 360 #endif
 361 #endif
 362
 363 #ifdef CONFIG_USB_FUNCTION_MASS_STORAGE
 364 #define CONFIG_CMD_USB_MASS_STORAGE
 365 #endif
 366
 367 #ifdef CONFIG_USB_KEYBOARD
 368 #define CONFIG_CONSOLE_MUX
 369 #define CONFIG_PREBOOT
 370 #define CONFIG_SYS_STDIO_DEREGISTER
 371 #define CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE
 372 #endif
 373
 374 #if !defined CONFIG_ENV_IS_IN_MMC && \
 375     !defined CONFIG_ENV_IS_IN_NAND && \
 376     !defined CONFIG_ENV_IS_IN_FAT && \
 377     !defined CONFIG_ENV_IS_IN_SPI_FLASH
 378 #define CONFIG_ENV_IS_NOWHERE
 379 #endif
 380
 381 #define CONFIG_MISC_INIT_R
 382 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
 383
 384 #ifndef CONFIG_SPL_BUILD
 385 #include <config_distro_defaults.h>
 386
 387 /* Enable pre-console buffer to get complete log on the VGA console */
 388 #define CONFIG_PRE_CONSOLE_BUFFER
 389 #define CONFIG_PRE_CON_BUF_SZ           4096 /* Aprox 2 80*25 screens */
 390
 391 /*
 392  * 160M RAM (256M minimum minus 64MB heap + 32MB for u-boot, stack, fb, etc.
 393  * 32M uncompressed kernel, 16M compressed kernel, 1M fdt,
 394  * 1M script, 1M pxe and the ramdisk at the end.
 395  */
 396 #define MEM_LAYOUT_ENV_SETTINGS \
 397         "bootm_size=0xa000000\0" \
 398         "kernel_addr_r=" __stringify(SDRAM_OFFSET(2000000)) "\0" \
 399         "fdt_addr_r=" __stringify(SDRAM_OFFSET(3000000)) "\0" \
 400         "scriptaddr=" __stringify(SDRAM_OFFSET(3100000)) "\0" \
 401         "pxefile_addr_r=" __stringify(SDRAM_OFFSET(3200000)) "\0" \
 402         "ramdisk_addr_r=" __stringify(SDRAM_OFFSET(3300000)) "\0"
 403
 404 #ifdef CONFIG_MMC
 405 #define BOOT_TARGET_DEVICES_MMC(func) func(MMC, mmc, 0)
 406 #else
 407 #define BOOT_TARGET_DEVICES_MMC(func)
 408 #endif
 409
 410 #ifdef CONFIG_AHCI
 411 #define BOOT_TARGET_DEVICES_SCSI(func) func(SCSI, scsi, 0)
 412 #else
 413 #define BOOT_TARGET_DEVICES_SCSI(func)
 414 #endif
 415
 416 #ifdef CONFIG_USB_STORAGE
 417 #define BOOT_TARGET_DEVICES_USB(func) func(USB, usb, 0)
 418 #else
 419 #define BOOT_TARGET_DEVICES_USB(func)
 420 #endif
 421
 422 /* FEL boot support, auto-execute boot.scr if a script address was provided */
 423 #define BOOTENV_DEV_FEL(devtypeu, devtypel, instance) \
 424         "bootcmd_fel=" \
 425                 "if test -n ${fel_booted} && test -n ${fel_scriptaddr}; then " \
 426                         "echo '(FEL boot)'; " \
 427                         "source ${fel_scriptaddr}; " \
 428                 "fi\0"
 429 #define BOOTENV_DEV_NAME_FEL(devtypeu, devtypel, instance) \
 430         "fel "
 431
 432 #define BOOT_TARGET_DEVICES(func) \
 433         func(FEL, fel, na) \
 434         BOOT_TARGET_DEVICES_MMC(func) \
 435         BOOT_TARGET_DEVICES_SCSI(func) \
 436         BOOT_TARGET_DEVICES_USB(func) \
 437         func(PXE, pxe, na) \
 438         func(DHCP, dhcp, na)
 439
 440 #ifdef CONFIG_OLD_SUNXI_KERNEL_COMPAT
 441 #define BOOTCMD_SUNXI_COMPAT \
 442         "bootcmd_sunxi_compat=" \
 443                 "setenv root /dev/mmcblk0p3 rootwait; " \
 444                 "if ext2load mmc 0 0x44000000 uEnv.txt; then " \
 445                         "echo Loaded environment from uEnv.txt; " \
 446                         "env import -t 0x44000000 ${filesize}; " \
 447                 "fi; " \
 448                 "setenv bootargs console=${console} root=${root} ${extraargs}; " \
 449                 "ext2load mmc 0 0x43000000 script.bin && " \
 450                 "ext2load mmc 0 0x48000000 uImage && " \
 451                 "bootm 0x48000000\0"
 452 #else
 453 #define BOOTCMD_SUNXI_COMPAT
 454 #endif
 455
 456 #include <config_distro_bootcmd.h>
 457
 458 #ifdef CONFIG_USB_KEYBOARD
 459 #define CONSOLE_STDIN_SETTINGS \
 460         "preboot=usb start\0" \
 461         "stdin=serial,usbkbd\0"
 462 #else
 463 #define CONSOLE_STDIN_SETTINGS \
 464         "stdin=serial\0"
 465 #endif
 466
 467 #ifdef CONFIG_VIDEO
 468 #define CONSOLE_STDOUT_SETTINGS \
 469         "stdout=serial,vga\0" \
 470         "stderr=serial,vga\0"
 471 #else
 472 #define CONSOLE_STDOUT_SETTINGS \
 473         "stdout=serial\0" \
 474         "stderr=serial\0"
 475 #endif
 476
 477 #define CONSOLE_ENV_SETTINGS \
 478         CONSOLE_STDIN_SETTINGS \
 479         CONSOLE_STDOUT_SETTINGS
 480
 481 #define CONFIG_EXTRA_ENV_SETTINGS \
 482         CONSOLE_ENV_SETTINGS \
 483         MEM_LAYOUT_ENV_SETTINGS \
 484         "fdtfile=" CONFIG_DEFAULT_DEVICE_TREE ".dtb\0" \
 485         "console=ttyS0,115200\0" \
 486         BOOTCMD_SUNXI_COMPAT \
 487         BOOTENV
 488
 489 #else /* ifndef CONFIG_SPL_BUILD */
 490 #define CONFIG_EXTRA_ENV_SETTINGS
 491 #endif
 492
 493 #endif /* _SUNXI_COMMON_CONFIG_H */