include/configs/sunxi-common.h

   1 /*
   2  * (C) Copyright 2012-2012 Henrik Nordstrom <henrik@henriknordstrom.net>
   3  *
   4  * (C) Copyright 2007-2011
   5  * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
   6  * Tom Cubie <tangliang@allwinnertech.com>
   7  *
   8  * Configuration settings for the Allwinner sunxi series of boards.
   9  *
  10  * SPDX-License-Identifier:     GPL-2.0+
  11  */
  12
  13 #ifndef _SUNXI_COMMON_CONFIG_H
  14 #define _SUNXI_COMMON_CONFIG_H
  15
  16 #include <asm/arch/cpu.h>
  17 #include <linux/stringify.h>
  18
  19 #ifdef CONFIG_OLD_SUNXI_KERNEL_COMPAT
  20 /*
  21  * The U-Boot workarounds bugs in the outdated buggy sunxi-3.4 kernels at the
  22  * expense of restricting some features, so the regular machine id values can
  23  * be used.
  24  */
  25 # define CONFIG_MACH_TYPE_COMPAT_REV    0
  26 #else
  27 /*
  28  * A compatibility guard to prevent loading outdated buggy sunxi-3.4 kernels.
  29  * Only sunxi-3.4 kernels with appropriate fixes applied are able to pass
  30  * beyond the machine id check.
  31  */
  32 # define CONFIG_MACH_TYPE_COMPAT_REV    1
  33 #endif
  34
  35 /* Serial & console */
  36 #define CONFIG_SYS_NS16550_SERIAL
  37 /* ns16550 reg in the low bits of cpu reg */
  38 #define CONFIG_SYS_NS16550_CLK          24000000
  39 #ifndef CONFIG_DM_SERIAL
  40 # define CONFIG_SYS_NS16550_REG_SIZE    -4
  41 # define CONFIG_SYS_NS16550_COM1                SUNXI_UART0_BASE
  42 # define CONFIG_SYS_NS16550_COM2                SUNXI_UART1_BASE
  43 # define CONFIG_SYS_NS16550_COM3                SUNXI_UART2_BASE
  44 # define CONFIG_SYS_NS16550_COM4                SUNXI_UART3_BASE
  45 # define CONFIG_SYS_NS16550_COM5                SUNXI_R_UART_BASE
  46 #endif
  47
  48 /* CPU */
  49 #define COUNTER_FREQUENCY               24000000
  50
  51 /*
  52  * The DRAM Base differs between some models. We cannot use macros for the
  53  * CONFIG_FOO defines which contain the DRAM base address since they end
  54  * up unexpanded in include/autoconf.mk .
  55  *
  56  * So we have to have this #ifdef #else #endif block for these.
  57  */
  58 #ifdef CONFIG_MACH_SUN9I
  59 #define SDRAM_OFFSET(x) 0x2##x
  60 #define CONFIG_SYS_SDRAM_BASE           0x20000000
  61 #define CONFIG_SYS_LOAD_ADDR            0x22000000 /* default load address */
  62 #define CONFIG_SYS_TEXT_BASE            0x2a000000
  63 /* Note SPL_STACK_R_ADDR is set through Kconfig, we include it here
  64  * since it needs to fit in with the other values. By also #defining it
  65  * we get warnings if the Kconfig value mismatches. */
  66 #define CONFIG_SPL_STACK_R_ADDR         0x2fe00000
  67 #define CONFIG_SPL_BSS_START_ADDR       0x2ff80000
  68 #else
  69 #define SDRAM_OFFSET(x) 0x4##x
  70 #define CONFIG_SYS_SDRAM_BASE           0x40000000
  71 #define CONFIG_SYS_LOAD_ADDR            0x42000000 /* default load address */
  72 /* V3s do not have enough memory to place code at 0x4a000000 */
  73 #ifndef CONFIG_MACH_SUN8I_V3S
  74 #define CONFIG_SYS_TEXT_BASE            0x4a000000
  75 #else
  76 #define CONFIG_SYS_TEXT_BASE            0x42e00000
  77 #endif
  78 /* Note SPL_STACK_R_ADDR is set through Kconfig, we include it here
  79  * since it needs to fit in with the other values. By also #defining it
  80  * we get warnings if the Kconfig value mismatches. */
  81 #define CONFIG_SPL_STACK_R_ADDR         0x4fe00000
  82 #define CONFIG_SPL_BSS_START_ADDR       0x4ff80000
  83 #endif
  84
  85 #define CONFIG_SPL_BSS_MAX_SIZE         0x00080000 /* 512 KiB */
  86
  87 #ifdef CONFIG_SUNXI_HIGH_SRAM
  88 /*
  89  * The A80's A1 sram starts at 0x00010000 rather then at 0x00000000 and is
  90  * slightly bigger. Note that it is possible to map the first 32 KiB of the
  91  * A1 at 0x00000000 like with older SoCs by writing 0x16aa0001 to the
  92  * undocumented 0x008000e0 SYS_CTRL register. Where the 16aa is a key and
  93  * the 1 actually activates the mapping of the first 32 KiB to 0x00000000.
  94  */
  95 #define CONFIG_SYS_INIT_RAM_ADDR        0x10000
  96 #define CONFIG_SYS_INIT_RAM_SIZE        0x08000 /* FIXME: 40 KiB ? */
  97 #else
  98 #define CONFIG_SYS_INIT_RAM_ADDR        0x0
  99 #define CONFIG_SYS_INIT_RAM_SIZE        0x8000  /* 32 KiB */
 100 #endif
 101
 102 #define CONFIG_SYS_INIT_SP_OFFSET \
 103         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 104 #define CONFIG_SYS_INIT_SP_ADDR \
 105         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 106
 107 #define CONFIG_NR_DRAM_BANKS            1
 108 #define PHYS_SDRAM_0                    CONFIG_SYS_SDRAM_BASE
 109 #define PHYS_SDRAM_0_SIZE               0x80000000 /* 2 GiB */
 110
 111 #ifdef CONFIG_AHCI
 112 #define CONFIG_LIBATA
 113 #define CONFIG_SCSI_AHCI
 114 #define CONFIG_SCSI_AHCI_PLAT
 115 #define CONFIG_SUNXI_AHCI
 116 #define CONFIG_SYS_64BIT_LBA
 117 #define CONFIG_SYS_SCSI_MAX_SCSI_ID     1
 118 #define CONFIG_SYS_SCSI_MAX_LUN         1
 119 #define CONFIG_SYS_SCSI_MAX_DEVICE      (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
 120                                          CONFIG_SYS_SCSI_MAX_LUN)
 121 #define CONFIG_SCSI
 122 #endif
 123
 124 #define CONFIG_SETUP_MEMORY_TAGS
 125 #define CONFIG_CMDLINE_TAG
 126 #define CONFIG_INITRD_TAG
 127 #define CONFIG_SERIAL_TAG
 128
 129 #ifdef CONFIG_NAND_SUNXI
 130 #define CONFIG_SYS_NAND_MAX_ECCPOS 1664
 131 #define CONFIG_SYS_NAND_ONFI_DETECTION
 132 #define CONFIG_SYS_MAX_NAND_DEVICE 8
 133
 134 #define CONFIG_MTD_DEVICE
 135 #define CONFIG_MTD_PARTITIONS
 136 #endif
 137
 138 #ifdef CONFIG_SPL_SPI_SUNXI
 139 #define CONFIG_SYS_SPI_U_BOOT_OFFS      0x8000
 140 #endif
 141
 142 /* mmc config */
 143 #ifdef CONFIG_MMC
 144 #define CONFIG_MMC_SUNXI_SLOT           0
 145 #endif
 146
 147 #if defined(CONFIG_ENV_IS_IN_MMC)
 148 #define CONFIG_SYS_MMC_ENV_DEV          0       /* first detected MMC controller */
 149 #define CONFIG_SYS_MMC_MAX_DEVICE       4
 150 #elif defined(CONFIG_ENV_IS_NOWHERE)
 151 #define CONFIG_ENV_SIZE                 (128 << 10)
 152 #endif
 153
 154 #ifndef CONFIG_MACH_SUN8I_V3S
 155 /* 64MB of malloc() pool */
 156 #define CONFIG_SYS_MALLOC_LEN           (CONFIG_ENV_SIZE + (64 << 20))
 157 #else
 158 /* 2MB of malloc() pool */
 159 #define CONFIG_SYS_MALLOC_LEN           (CONFIG_ENV_SIZE + (2 << 20))
 160 #endif
 161
 162 /*
 163  * Miscellaneous configurable options
 164  */
 165 #define CONFIG_SYS_CBSIZE       1024    /* Console I/O Buffer Size */
 166 #define CONFIG_SYS_PBSIZE       1024    /* Print Buffer Size */
 167 #define CONFIG_SYS_MAXARGS      16      /* max number of command args */
 168
 169 /* Boot Argument Buffer Size */
 170 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE
 171
 172 /* standalone support */
 173 #define CONFIG_STANDALONE_LOAD_ADDR     CONFIG_SYS_LOAD_ADDR
 174
 175 /* FLASH and environment organization */
 176
 177 #define CONFIG_SYS_MONITOR_LEN          (768 << 10)     /* 768 KiB */
 178
 179 #define CONFIG_FAT_WRITE        /* enable write access */
 180
 181 #define CONFIG_SPL_FRAMEWORK
 182
 183 #ifndef CONFIG_ARM64            /* AArch64 FEL support is not ready yet */
 184 #define CONFIG_SPL_BOARD_LOAD_IMAGE
 185 #endif
 186
 187 #ifdef CONFIG_SUNXI_HIGH_SRAM
 188 #define CONFIG_SPL_TEXT_BASE            0x10040         /* sram start+header */
 189 #define CONFIG_SPL_MAX_SIZE             0x7fc0          /* 32 KiB */
 190 #define LOW_LEVEL_SRAM_STACK            0x00018000
 191 #else
 192 #define CONFIG_SPL_TEXT_BASE            0x40            /* sram start+header */
 193 #define CONFIG_SPL_MAX_SIZE             0x5fc0          /* 24KB on sun4i/sun7i */
 194 #define LOW_LEVEL_SRAM_STACK            0x00008000      /* End of sram */
 195 #endif
 196
 197 #define CONFIG_SPL_STACK                LOW_LEVEL_SRAM_STACK
 198
 199 #ifndef CONFIG_ARM64
 200 #define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv7/sunxi/u-boot-spl.lds"
 201 #endif
 202
 203 #define CONFIG_SPL_PAD_TO               32768           /* decimal for 'dd' */
 204
 205
 206 /* I2C */
 207 #if defined CONFIG_AXP152_POWER || defined CONFIG_AXP209_POWER || \
 208     defined CONFIG_SY8106A_POWER
 209 #endif
 210
 211 #if defined CONFIG_I2C0_ENABLE || defined CONFIG_I2C1_ENABLE || \
 212     defined CONFIG_I2C2_ENABLE || defined CONFIG_I2C3_ENABLE || \
 213     defined CONFIG_I2C4_ENABLE || defined CONFIG_R_I2C_ENABLE
 214 #define CONFIG_SYS_I2C_MVTWSI
 215 #ifndef CONFIG_DM_I2C
 216 #define CONFIG_SYS_I2C
 217 #define CONFIG_SYS_I2C_SPEED            400000
 218 #define CONFIG_SYS_I2C_SLAVE            0x7f
 219 #endif
 220 #endif
 221
 222 #if defined CONFIG_VIDEO_LCD_PANEL_I2C && !(defined CONFIG_SPL_BUILD)
 223 #define CONFIG_SYS_I2C_SOFT
 224 #define CONFIG_SYS_I2C_SOFT_SPEED       50000
 225 #define CONFIG_SYS_I2C_SOFT_SLAVE       0x00
 226 /* We use pin names in Kconfig and sunxi_name_to_gpio() */
 227 #define CONFIG_SOFT_I2C_GPIO_SDA        soft_i2c_gpio_sda
 228 #define CONFIG_SOFT_I2C_GPIO_SCL        soft_i2c_gpio_scl
 229 #ifndef __ASSEMBLY__
 230 extern int soft_i2c_gpio_sda;
 231 extern int soft_i2c_gpio_scl;
 232 #endif
 233 #define CONFIG_VIDEO_LCD_I2C_BUS        0 /* The lcd panel soft i2c is bus 0 */
 234 #define CONFIG_SYS_SPD_BUS_NUM          1 /* And the axp209 i2c bus is bus 1 */
 235 #else
 236 #define CONFIG_SYS_SPD_BUS_NUM          0 /* The axp209 i2c bus is bus 0 */
 237 #define CONFIG_VIDEO_LCD_I2C_BUS        -1 /* NA, but necessary to compile */
 238 #endif
 239
 240 /* PMU */
 241 #if defined CONFIG_AXP152_POWER || defined CONFIG_AXP209_POWER || \
 242     defined CONFIG_AXP221_POWER || defined CONFIG_AXP818_POWER || \
 243     defined CONFIG_SY8106A_POWER
 244 #endif
 245
 246 #ifdef CONFIG_REQUIRE_SERIAL_CONSOLE
 247 #if CONFIG_CONS_INDEX == 1
 248 #ifdef CONFIG_MACH_SUN9I
 249 #define OF_STDOUT_PATH          "/soc/serial@07000000:115200"
 250 #else
 251 #define OF_STDOUT_PATH          "/soc@01c00000/serial@01c28000:115200"
 252 #endif
 253 #elif CONFIG_CONS_INDEX == 2 && defined(CONFIG_MACH_SUN5I)
 254 #define OF_STDOUT_PATH          "/soc@01c00000/serial@01c28400:115200"
 255 #elif CONFIG_CONS_INDEX == 3 && defined(CONFIG_MACH_SUN8I)
 256 #define OF_STDOUT_PATH          "/soc@01c00000/serial@01c28800:115200"
 257 #elif CONFIG_CONS_INDEX == 5 && defined(CONFIG_MACH_SUN8I)
 258 #define OF_STDOUT_PATH          "/soc@01c00000/serial@01f02800:115200"
 259 #else
 260 #error Unsupported console port nr. Please fix stdout-path in sunxi-common.h.
 261 #endif
 262 #endif /* ifdef CONFIG_REQUIRE_SERIAL_CONSOLE */
 263
 264 /* GPIO */
 265 #define CONFIG_SUNXI_GPIO
 266
 267 #ifdef CONFIG_VIDEO
 268 /*
 269  * The amount of RAM to keep free at the top of RAM when relocating u-boot,
 270  * to use as framebuffer. This must be a multiple of 4096.
 271  */
 272 #define CONFIG_SUNXI_MAX_FB_SIZE (16 << 20)
 273
 274 /* Do we want to initialize a simple FB? */
 275 #define CONFIG_VIDEO_DT_SIMPLEFB
 276
 277 #define CONFIG_VIDEO_SUNXI
 278
 279 #define CONFIG_VIDEO_LOGO
 280 #define CONFIG_VIDEO_STD_TIMINGS
 281 #define CONFIG_I2C_EDID
 282 #define VIDEO_LINE_LEN (pGD->plnSizeX)
 283
 284 /* allow both serial and cfb console. */
 285 /* stop x86 thinking in cfbconsole from trying to init a pc keyboard */
 286
 287 #endif /* CONFIG_VIDEO */
 288
 289 /* Ethernet support */
 290 #ifdef CONFIG_SUNXI_EMAC
 291 #define CONFIG_PHY_ADDR         1
 292 #define CONFIG_MII                      /* MII PHY management           */
 293 #define CONFIG_PHYLIB
 294 #endif
 295
 296 #ifdef CONFIG_SUNXI_GMAC
 297 #define CONFIG_PHY_GIGE                 /* GMAC can use gigabit PHY     */
 298 #define CONFIG_PHY_ADDR         1
 299 #define CONFIG_MII                      /* MII PHY management           */
 300 #define CONFIG_PHY_REALTEK
 301 #endif
 302
 303 #ifdef CONFIG_USB_EHCI_HCD
 304 #define CONFIG_USB_OHCI_NEW
 305 #define CONFIG_USB_OHCI_SUNXI
 306 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 1
 307 #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 1
 308 #endif
 309
 310 #ifdef CONFIG_USB_MUSB_SUNXI
 311 #define CONFIG_USB_MUSB_PIO_ONLY
 312 #endif
 313
 314 #ifdef CONFIG_USB_MUSB_GADGET
 315 #define CONFIG_USB_FUNCTION_FASTBOOT
 316 #define CONFIG_USB_FUNCTION_MASS_STORAGE
 317 #endif
 318
 319 #ifdef CONFIG_USB_FUNCTION_FASTBOOT
 320 #define CONFIG_CMD_FASTBOOT
 321 #define CONFIG_FASTBOOT_BUF_ADDR        CONFIG_SYS_LOAD_ADDR
 322 #define CONFIG_FASTBOOT_BUF_SIZE        0x2000000
 323 #define CONFIG_ANDROID_BOOT_IMAGE
 324
 325 #define CONFIG_FASTBOOT_FLASH
 326
 327 #ifdef CONFIG_MMC
 328 #define CONFIG_FASTBOOT_FLASH_MMC_DEV   0
 329 #endif
 330 #endif
 331
 332 #ifdef CONFIG_USB_FUNCTION_MASS_STORAGE
 333 #endif
 334
 335 #ifdef CONFIG_USB_KEYBOARD
 336 #define CONFIG_PREBOOT
 337 #define CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE
 338 #endif
 339
 340 #define CONFIG_MISC_INIT_R
 341
 342 #ifndef CONFIG_SPL_BUILD
 343 #include <config_distro_defaults.h>
 344
 345 #ifdef CONFIG_ARM64
 346 /*
 347  * Boards seem to come with at least 512MB of DRAM.
 348  * The kernel should go at 512K, which is the default text offset (that will
 349  * be adjusted at runtime if needed).
 350  * There is no compression for arm64 kernels (yet), so leave some space
 351  * for really big kernels, say 256MB for now.
 352  * Scripts, PXE and DTBs should go afterwards, leaving the rest for the initrd.
 353  * Align the initrd to a 2MB page.
 354  */
 355 #define BOOTM_SIZE      __stringify(0xa000000)
 356 #define KERNEL_ADDR_R   __stringify(SDRAM_OFFSET(0080000))
 357 #define FDT_ADDR_R      __stringify(SDRAM_OFFSET(FA00000))
 358 #define SCRIPT_ADDR_R   __stringify(SDRAM_OFFSET(FC00000))
 359 #define PXEFILE_ADDR_R  __stringify(SDRAM_OFFSET(FD00000))
 360 #define RAMDISK_ADDR_R  __stringify(SDRAM_OFFSET(FE00000))
 361
 362 #else
 363 /*
 364  * 160M RAM (256M minimum minus 64MB heap + 32MB for u-boot, stack, fb, etc.
 365  * 32M uncompressed kernel, 16M compressed kernel, 1M fdt,
 366  * 1M script, 1M pxe and the ramdisk at the end.
 367  */
 368 #ifndef CONFIG_MACH_SUN8I_V3S
 369 #define BOOTM_SIZE     __stringify(0xa000000)
 370 #define KERNEL_ADDR_R  __stringify(SDRAM_OFFSET(2000000))
 371 #define FDT_ADDR_R     __stringify(SDRAM_OFFSET(3000000))
 372 #define SCRIPT_ADDR_R  __stringify(SDRAM_OFFSET(3100000))
 373 #define PXEFILE_ADDR_R __stringify(SDRAM_OFFSET(3200000))
 374 #define RAMDISK_ADDR_R __stringify(SDRAM_OFFSET(3300000))
 375 #else
 376 /*
 377  * 64M RAM minus 2MB heap + 16MB for u-boot, stack, fb, etc.
 378  * 16M uncompressed kernel, 8M compressed kernel, 1M fdt,
 379  * 1M script, 1M pxe and the ramdisk at the end.
 380  */
 381 #define BOOTM_SIZE     __stringify(0x2e00000)
 382 #define KERNEL_ADDR_R  __stringify(SDRAM_OFFSET(1000000))
 383 #define FDT_ADDR_R     __stringify(SDRAM_OFFSET(1800000))
 384 #define SCRIPT_ADDR_R  __stringify(SDRAM_OFFSET(1900000))
 385 #define PXEFILE_ADDR_R __stringify(SDRAM_OFFSET(1A00000))
 386 #define RAMDISK_ADDR_R __stringify(SDRAM_OFFSET(1B00000))
 387 #endif
 388 #endif
 389
 390 #define MEM_LAYOUT_ENV_SETTINGS \
 391         "bootm_size=" BOOTM_SIZE "\0" \
 392         "kernel_addr_r=" KERNEL_ADDR_R "\0" \
 393         "fdt_addr_r=" FDT_ADDR_R "\0" \
 394         "scriptaddr=" SCRIPT_ADDR_R "\0" \
 395         "pxefile_addr_r=" PXEFILE_ADDR_R "\0" \
 396         "ramdisk_addr_r=" RAMDISK_ADDR_R "\0"
 397
 398 #define DFU_ALT_INFO_RAM \
 399         "dfu_alt_info_ram=" \
 400         "kernel ram " KERNEL_ADDR_R " 0x1000000;" \
 401         "fdt ram " FDT_ADDR_R " 0x100000;" \
 402         "ramdisk ram " RAMDISK_ADDR_R " 0x4000000\0"
 403
 404 #ifdef CONFIG_MMC
 405 #define BOOT_TARGET_DEVICES_MMC(func) func(MMC, mmc, 0)
 406 #if CONFIG_MMC_SUNXI_SLOT_EXTRA != -1
 407 #define BOOT_TARGET_DEVICES_MMC_EXTRA(func) func(MMC, mmc, 1)
 408 #else
 409 #define BOOT_TARGET_DEVICES_MMC_EXTRA(func)
 410 #endif
 411 #else
 412 #define BOOT_TARGET_DEVICES_MMC(func)
 413 #define BOOT_TARGET_DEVICES_MMC_EXTRA(func)
 414 #endif
 415
 416 #ifdef CONFIG_AHCI
 417 #define BOOT_TARGET_DEVICES_SCSI(func) func(SCSI, scsi, 0)
 418 #else
 419 #define BOOT_TARGET_DEVICES_SCSI(func)
 420 #endif
 421
 422 #ifdef CONFIG_USB_STORAGE
 423 #define BOOT_TARGET_DEVICES_USB(func) func(USB, usb, 0)
 424 #else
 425 #define BOOT_TARGET_DEVICES_USB(func)
 426 #endif
 427
 428 /* FEL boot support, auto-execute boot.scr if a script address was provided */
 429 #define BOOTENV_DEV_FEL(devtypeu, devtypel, instance) \
 430         "bootcmd_fel=" \
 431                 "if test -n ${fel_booted} && test -n ${fel_scriptaddr}; then " \
 432                         "echo '(FEL boot)'; " \
 433                         "source ${fel_scriptaddr}; " \
 434                 "fi\0"
 435 #define BOOTENV_DEV_NAME_FEL(devtypeu, devtypel, instance) \
 436         "fel "
 437
 438 #define BOOT_TARGET_DEVICES(func) \
 439         func(FEL, fel, na) \
 440         BOOT_TARGET_DEVICES_MMC(func) \
 441         BOOT_TARGET_DEVICES_MMC_EXTRA(func) \
 442         BOOT_TARGET_DEVICES_SCSI(func) \
 443         BOOT_TARGET_DEVICES_USB(func) \
 444         func(PXE, pxe, na) \
 445         func(DHCP, dhcp, na)
 446
 447 #ifdef CONFIG_OLD_SUNXI_KERNEL_COMPAT
 448 #define BOOTCMD_SUNXI_COMPAT \
 449         "bootcmd_sunxi_compat=" \
 450                 "setenv root /dev/mmcblk0p3 rootwait; " \
 451                 "if ext2load mmc 0 0x44000000 uEnv.txt; then " \
 452                         "echo Loaded environment from uEnv.txt; " \
 453                         "env import -t 0x44000000 ${filesize}; " \
 454                 "fi; " \
 455                 "setenv bootargs console=${console} root=${root} ${extraargs}; " \
 456                 "ext2load mmc 0 0x43000000 script.bin && " \
 457                 "ext2load mmc 0 0x48000000 uImage && " \
 458                 "bootm 0x48000000\0"
 459 #else
 460 #define BOOTCMD_SUNXI_COMPAT
 461 #endif
 462
 463 #include <config_distro_bootcmd.h>
 464
 465 #ifdef CONFIG_USB_KEYBOARD
 466 #define CONSOLE_STDIN_SETTINGS \
 467         "preboot=usb start\0" \
 468         "stdin=serial,usbkbd\0"
 469 #else
 470 #define CONSOLE_STDIN_SETTINGS \
 471         "stdin=serial\0"
 472 #endif
 473
 474 #ifdef CONFIG_VIDEO
 475 #define CONSOLE_STDOUT_SETTINGS \
 476         "stdout=serial,vga\0" \
 477         "stderr=serial,vga\0"
 478 #elif CONFIG_DM_VIDEO
 479 #define CONFIG_SYS_WHITE_ON_BLACK
 480 #define CONSOLE_STDOUT_SETTINGS \
 481         "stdout=serial,vidconsole\0" \
 482         "stderr=serial,vidconsole\0"
 483 #else
 484 #define CONSOLE_STDOUT_SETTINGS \
 485         "stdout=serial\0" \
 486         "stderr=serial\0"
 487 #endif
 488
 489 #ifdef CONFIG_MTDIDS_DEFAULT
 490 #define SUNXI_MTDIDS_DEFAULT \
 491         "mtdids=" CONFIG_MTDIDS_DEFAULT "\0"
 492 #else
 493 #define SUNXI_MTDIDS_DEFAULT
 494 #endif
 495
 496 #ifdef CONFIG_MTDPARTS_DEFAULT
 497 #define SUNXI_MTDPARTS_DEFAULT \
 498         "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0"
 499 #else
 500 #define SUNXI_MTDPARTS_DEFAULT
 501 #endif
 502
 503 #define CONSOLE_ENV_SETTINGS \
 504         CONSOLE_STDIN_SETTINGS \
 505         CONSOLE_STDOUT_SETTINGS
 506
 507 #ifdef CONFIG_ARM64
 508 #define FDTFILE "allwinner/" CONFIG_DEFAULT_DEVICE_TREE ".dtb"
 509 #else
 510 #define FDTFILE CONFIG_DEFAULT_DEVICE_TREE ".dtb"
 511 #endif
 512
 513 #define CONFIG_EXTRA_ENV_SETTINGS \
 514         CONSOLE_ENV_SETTINGS \
 515         MEM_LAYOUT_ENV_SETTINGS \
 516         DFU_ALT_INFO_RAM \
 517         "fdtfile=" FDTFILE "\0" \
 518         "console=ttyS0,115200\0" \
 519         SUNXI_MTDIDS_DEFAULT \
 520         SUNXI_MTDPARTS_DEFAULT \
 521         BOOTCMD_SUNXI_COMPAT \
 522         BOOTENV
 523
 524 #else /* ifndef CONFIG_SPL_BUILD */
 525 #define CONFIG_EXTRA_ENV_SETTINGS
 526 #endif
 527
 528 #endif /* _SUNXI_COMMON_CONFIG_H */