include/configs/sunxi-common.h

   1 /*
   2  * (C) Copyright 2012-2012 Henrik Nordstrom <henrik@henriknordstrom.net>
   3  *
   4  * (C) Copyright 2007-2011
   5  * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
   6  * Tom Cubie <tangliang@allwinnertech.com>
   7  *
   8  * Configuration settings for the Allwinner sunxi series of boards.
   9  *
  10  * SPDX-License-Identifier:     GPL-2.0+
  11  */
  12
  13 #ifndef _SUNXI_COMMON_CONFIG_H
  14 #define _SUNXI_COMMON_CONFIG_H
  15
  16 #include <asm/arch/cpu.h>
  17 #include <linux/stringify.h>
  18
  19 #ifdef CONFIG_OLD_SUNXI_KERNEL_COMPAT
  20 /*
  21  * The U-Boot workarounds bugs in the outdated buggy sunxi-3.4 kernels at the
  22  * expense of restricting some features, so the regular machine id values can
  23  * be used.
  24  */
  25 # define CONFIG_MACH_TYPE_COMPAT_REV    0
  26 #else
  27 /*
  28  * A compatibility guard to prevent loading outdated buggy sunxi-3.4 kernels.
  29  * Only sunxi-3.4 kernels with appropriate fixes applied are able to pass
  30  * beyond the machine id check.
  31  */
  32 # define CONFIG_MACH_TYPE_COMPAT_REV    1
  33 #endif
  34
  35 #ifdef CONFIG_ARM64
  36 #define CONFIG_BUILD_TARGET "u-boot.itb"
  37 #define CONFIG_SYS_BOOTM_LEN            (32 << 20)
  38 #endif
  39
  40 /* Serial & console */
  41 #define CONFIG_SYS_NS16550_SERIAL
  42 /* ns16550 reg in the low bits of cpu reg */
  43 #define CONFIG_SYS_NS16550_CLK          24000000
  44 #ifndef CONFIG_DM_SERIAL
  45 # define CONFIG_SYS_NS16550_REG_SIZE    -4
  46 # define CONFIG_SYS_NS16550_COM1                SUNXI_UART0_BASE
  47 # define CONFIG_SYS_NS16550_COM2                SUNXI_UART1_BASE
  48 # define CONFIG_SYS_NS16550_COM3                SUNXI_UART2_BASE
  49 # define CONFIG_SYS_NS16550_COM4                SUNXI_UART3_BASE
  50 # define CONFIG_SYS_NS16550_COM5                SUNXI_R_UART_BASE
  51 #endif
  52
  53 /* CPU */
  54 #define COUNTER_FREQUENCY               24000000
  55
  56 /*
  57  * The DRAM Base differs between some models. We cannot use macros for the
  58  * CONFIG_FOO defines which contain the DRAM base address since they end
  59  * up unexpanded in include/autoconf.mk .
  60  *
  61  * So we have to have this #ifdef #else #endif block for these.
  62  */
  63 #ifdef CONFIG_MACH_SUN9I
  64 #define SDRAM_OFFSET(x) 0x2##x
  65 #define CONFIG_SYS_SDRAM_BASE           0x20000000
  66 #define CONFIG_SYS_LOAD_ADDR            0x22000000 /* default load address */
  67 #define CONFIG_SYS_TEXT_BASE            0x2a000000
  68 /* Note SPL_STACK_R_ADDR is set through Kconfig, we include it here
  69  * since it needs to fit in with the other values. By also #defining it
  70  * we get warnings if the Kconfig value mismatches. */
  71 #define CONFIG_SPL_STACK_R_ADDR         0x2fe00000
  72 #define CONFIG_SPL_BSS_START_ADDR       0x2ff80000
  73 #else
  74 #define SDRAM_OFFSET(x) 0x4##x
  75 #define CONFIG_SYS_SDRAM_BASE           0x40000000
  76 #define CONFIG_SYS_LOAD_ADDR            0x42000000 /* default load address */
  77 /* V3s do not have enough memory to place code at 0x4a000000 */
  78 #ifndef CONFIG_MACH_SUN8I_V3S
  79 #define CONFIG_SYS_TEXT_BASE            0x4a000000
  80 #else
  81 #define CONFIG_SYS_TEXT_BASE            0x42e00000
  82 #endif
  83 /* Note SPL_STACK_R_ADDR is set through Kconfig, we include it here
  84  * since it needs to fit in with the other values. By also #defining it
  85  * we get warnings if the Kconfig value mismatches. */
  86 #define CONFIG_SPL_STACK_R_ADDR         0x4fe00000
  87 #define CONFIG_SPL_BSS_START_ADDR       0x4ff80000
  88 #endif
  89
  90 #define CONFIG_SPL_BSS_MAX_SIZE         0x00080000 /* 512 KiB */
  91
  92 #ifdef CONFIG_SUNXI_HIGH_SRAM
  93 /*
  94  * The A80's A1 sram starts at 0x00010000 rather then at 0x00000000 and is
  95  * slightly bigger. Note that it is possible to map the first 32 KiB of the
  96  * A1 at 0x00000000 like with older SoCs by writing 0x16aa0001 to the
  97  * undocumented 0x008000e0 SYS_CTRL register. Where the 16aa is a key and
  98  * the 1 actually activates the mapping of the first 32 KiB to 0x00000000.
  99  */
 100 #define CONFIG_SYS_INIT_RAM_ADDR        0x10000
 101 #define CONFIG_SYS_INIT_RAM_SIZE        0x08000 /* FIXME: 40 KiB ? */
 102 #else
 103 #define CONFIG_SYS_INIT_RAM_ADDR        0x0
 104 #define CONFIG_SYS_INIT_RAM_SIZE        0x8000  /* 32 KiB */
 105 #endif
 106
 107 #define CONFIG_SYS_INIT_SP_OFFSET \
 108         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 109 #define CONFIG_SYS_INIT_SP_ADDR \
 110         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 111
 112 #define CONFIG_NR_DRAM_BANKS            1
 113 #define PHYS_SDRAM_0                    CONFIG_SYS_SDRAM_BASE
 114 #define PHYS_SDRAM_0_SIZE               0x80000000 /* 2 GiB */
 115
 116 #ifdef CONFIG_AHCI
 117 #define CONFIG_LIBATA
 118 #define CONFIG_SCSI_AHCI
 119 #define CONFIG_SCSI_AHCI_PLAT
 120 #define CONFIG_SUNXI_AHCI
 121 #define CONFIG_SYS_64BIT_LBA
 122 #define CONFIG_SYS_SCSI_MAX_SCSI_ID     1
 123 #define CONFIG_SYS_SCSI_MAX_LUN         1
 124 #define CONFIG_SYS_SCSI_MAX_DEVICE      (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
 125                                          CONFIG_SYS_SCSI_MAX_LUN)
 126 #endif
 127
 128 #define CONFIG_SETUP_MEMORY_TAGS
 129 #define CONFIG_CMDLINE_TAG
 130 #define CONFIG_INITRD_TAG
 131 #define CONFIG_SERIAL_TAG
 132
 133 #ifdef CONFIG_NAND_SUNXI
 134 #define CONFIG_SYS_NAND_MAX_ECCPOS 1664
 135 #define CONFIG_SYS_NAND_ONFI_DETECTION
 136 #define CONFIG_SYS_MAX_NAND_DEVICE 8
 137
 138 #define CONFIG_MTD_DEVICE
 139 #define CONFIG_MTD_PARTITIONS
 140 #endif
 141
 142 #ifdef CONFIG_SPL_SPI_SUNXI
 143 #define CONFIG_SYS_SPI_U_BOOT_OFFS      0x8000
 144 #endif
 145
 146 /* mmc config */
 147 #ifdef CONFIG_MMC
 148 #define CONFIG_MMC_SUNXI_SLOT           0
 149 #endif
 150
 151 #if defined(CONFIG_ENV_IS_IN_MMC)
 152 #if CONFIG_MMC_SUNXI_SLOT_EXTRA != -1
 153 /* If we have two devices (most likely eMMC + MMC), favour the eMMC */
 154 #define CONFIG_SYS_MMC_ENV_DEV          1
 155 #else
 156 /* Otherwise, use the only device we have */
 157 #define CONFIG_SYS_MMC_ENV_DEV          0
 158 #endif
 159 #define CONFIG_SYS_MMC_MAX_DEVICE       4
 160 #elif defined(CONFIG_ENV_IS_NOWHERE)
 161 #define CONFIG_ENV_SIZE                 (128 << 10)
 162 #endif
 163
 164 #ifndef CONFIG_MACH_SUN8I_V3S
 165 /* 64MB of malloc() pool */
 166 #define CONFIG_SYS_MALLOC_LEN           (CONFIG_ENV_SIZE + (64 << 20))
 167 #else
 168 /* 2MB of malloc() pool */
 169 #define CONFIG_SYS_MALLOC_LEN           (CONFIG_ENV_SIZE + (2 << 20))
 170 #endif
 171
 172 /*
 173  * Miscellaneous configurable options
 174  */
 175 #define CONFIG_SYS_CBSIZE       1024    /* Console I/O Buffer Size */
 176 #define CONFIG_SYS_PBSIZE       1024    /* Print Buffer Size */
 177
 178 /* standalone support */
 179 #define CONFIG_STANDALONE_LOAD_ADDR     CONFIG_SYS_LOAD_ADDR
 180
 181 /* FLASH and environment organization */
 182
 183 #define CONFIG_SYS_MONITOR_LEN          (768 << 10)     /* 768 KiB */
 184
 185 #define CONFIG_SPL_FRAMEWORK
 186
 187 #ifndef CONFIG_ARM64            /* AArch64 FEL support is not ready yet */
 188 #define CONFIG_SPL_BOARD_LOAD_IMAGE
 189 #endif
 190
 191 #ifdef CONFIG_SUNXI_HIGH_SRAM
 192 #define CONFIG_SPL_TEXT_BASE            0x10060         /* sram start+header */
 193 #define CONFIG_SPL_MAX_SIZE             0x7fa0          /* 32 KiB */
 194 #ifdef CONFIG_ARM64
 195 /* end of SRAM A2 for now, as SRAM A1 is pretty tight for an ARM64 build */
 196 #define LOW_LEVEL_SRAM_STACK            0x00054000
 197 #else
 198 #define LOW_LEVEL_SRAM_STACK            0x00018000
 199 #endif /* !CONFIG_ARM64 */
 200 #else
 201 #define CONFIG_SPL_TEXT_BASE            0x60            /* sram start+header */
 202 #define CONFIG_SPL_MAX_SIZE             0x5fa0          /* 24KB on sun4i/sun7i */
 203 #define LOW_LEVEL_SRAM_STACK            0x00008000      /* End of sram */
 204 #endif
 205
 206 #define CONFIG_SPL_STACK                LOW_LEVEL_SRAM_STACK
 207
 208 #define CONFIG_SPL_PAD_TO               32768           /* decimal for 'dd' */
 209
 210
 211 /* I2C */
 212 #if defined CONFIG_AXP152_POWER || defined CONFIG_AXP209_POWER || \
 213     defined CONFIG_SY8106A_POWER
 214 #endif
 215
 216 #if defined CONFIG_I2C0_ENABLE || defined CONFIG_I2C1_ENABLE || \
 217     defined CONFIG_I2C2_ENABLE || defined CONFIG_I2C3_ENABLE || \
 218     defined CONFIG_I2C4_ENABLE || defined CONFIG_R_I2C_ENABLE
 219 #define CONFIG_SYS_I2C_MVTWSI
 220 #ifndef CONFIG_DM_I2C
 221 #define CONFIG_SYS_I2C
 222 #define CONFIG_SYS_I2C_SPEED            400000
 223 #define CONFIG_SYS_I2C_SLAVE            0x7f
 224 #endif
 225 #endif
 226
 227 #if defined CONFIG_VIDEO_LCD_PANEL_I2C && !(defined CONFIG_SPL_BUILD)
 228 #define CONFIG_SYS_I2C_SOFT
 229 #define CONFIG_SYS_I2C_SOFT_SPEED       50000
 230 #define CONFIG_SYS_I2C_SOFT_SLAVE       0x00
 231 /* We use pin names in Kconfig and sunxi_name_to_gpio() */
 232 #define CONFIG_SOFT_I2C_GPIO_SDA        soft_i2c_gpio_sda
 233 #define CONFIG_SOFT_I2C_GPIO_SCL        soft_i2c_gpio_scl
 234 #ifndef __ASSEMBLY__
 235 extern int soft_i2c_gpio_sda;
 236 extern int soft_i2c_gpio_scl;
 237 #endif
 238 #define CONFIG_VIDEO_LCD_I2C_BUS        0 /* The lcd panel soft i2c is bus 0 */
 239 #define CONFIG_SYS_SPD_BUS_NUM          1 /* And the axp209 i2c bus is bus 1 */
 240 #else
 241 #define CONFIG_SYS_SPD_BUS_NUM          0 /* The axp209 i2c bus is bus 0 */
 242 #define CONFIG_VIDEO_LCD_I2C_BUS        -1 /* NA, but necessary to compile */
 243 #endif
 244
 245 /* PMU */
 246 #if defined CONFIG_AXP152_POWER || defined CONFIG_AXP209_POWER || \
 247     defined CONFIG_AXP221_POWER || defined CONFIG_AXP818_POWER || \
 248     defined CONFIG_SY8106A_POWER
 249 #endif
 250
 251 #ifdef CONFIG_REQUIRE_SERIAL_CONSOLE
 252 #if CONFIG_CONS_INDEX == 1
 253 #ifdef CONFIG_MACH_SUN9I
 254 #define OF_STDOUT_PATH          "/soc/serial@07000000:115200"
 255 #else
 256 #define OF_STDOUT_PATH          "/soc@01c00000/serial@01c28000:115200"
 257 #endif
 258 #elif CONFIG_CONS_INDEX == 2 && defined(CONFIG_MACH_SUN5I)
 259 #define OF_STDOUT_PATH          "/soc@01c00000/serial@01c28400:115200"
 260 #elif CONFIG_CONS_INDEX == 3 && defined(CONFIG_MACH_SUN8I)
 261 #define OF_STDOUT_PATH          "/soc@01c00000/serial@01c28800:115200"
 262 #elif CONFIG_CONS_INDEX == 5 && defined(CONFIG_MACH_SUN8I)
 263 #define OF_STDOUT_PATH          "/soc@01c00000/serial@01f02800:115200"
 264 #else
 265 #error Unsupported console port nr. Please fix stdout-path in sunxi-common.h.
 266 #endif
 267 #endif /* ifdef CONFIG_REQUIRE_SERIAL_CONSOLE */
 268
 269 /* GPIO */
 270 #define CONFIG_SUNXI_GPIO
 271
 272 #ifdef CONFIG_VIDEO_SUNXI
 273 /*
 274  * The amount of RAM to keep free at the top of RAM when relocating u-boot,
 275  * to use as framebuffer. This must be a multiple of 4096.
 276  */
 277 #define CONFIG_SUNXI_MAX_FB_SIZE (16 << 20)
 278
 279 #define CONFIG_VIDEO_LOGO
 280 #define CONFIG_VIDEO_STD_TIMINGS
 281 #define CONFIG_I2C_EDID
 282 #define VIDEO_LINE_LEN (pGD->plnSizeX)
 283
 284 /* allow both serial and cfb console. */
 285 /* stop x86 thinking in cfbconsole from trying to init a pc keyboard */
 286
 287 #endif /* CONFIG_VIDEO_SUNXI */
 288
 289 /* Ethernet support */
 290 #ifdef CONFIG_SUN4I_EMAC
 291 #define CONFIG_PHY_ADDR         1
 292 #define CONFIG_MII                      /* MII PHY management           */
 293 #endif
 294
 295 #ifdef CONFIG_SUN7I_GMAC
 296 #define CONFIG_PHY_ADDR         1
 297 #define CONFIG_MII                      /* MII PHY management           */
 298 #define CONFIG_PHY_REALTEK
 299 #endif
 300
 301 #ifdef CONFIG_USB_EHCI_HCD
 302 #define CONFIG_USB_OHCI_NEW
 303 #define CONFIG_USB_OHCI_SUNXI
 304 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 1
 305 #endif
 306
 307 #ifdef CONFIG_USB_MUSB_SUNXI
 308 #define CONFIG_USB_MUSB_PIO_ONLY
 309 #endif
 310
 311 #ifdef CONFIG_USB_MUSB_GADGET
 312 #define CONFIG_USB_FUNCTION_MASS_STORAGE
 313 #endif
 314
 315 #ifdef CONFIG_USB_FUNCTION_MASS_STORAGE
 316 #endif
 317
 318 #ifdef CONFIG_USB_KEYBOARD
 319 #define CONFIG_PREBOOT
 320 #endif
 321
 322 #define CONFIG_MISC_INIT_R
 323
 324 #ifndef CONFIG_SPL_BUILD
 325 #include <config_distro_defaults.h>
 326
 327 #ifdef CONFIG_ARM64
 328 /*
 329  * Boards seem to come with at least 512MB of DRAM.
 330  * The kernel should go at 512K, which is the default text offset (that will
 331  * be adjusted at runtime if needed).
 332  * There is no compression for arm64 kernels (yet), so leave some space
 333  * for really big kernels, say 256MB for now.
 334  * Scripts, PXE and DTBs should go afterwards, leaving the rest for the initrd.
 335  * Align the initrd to a 2MB page.
 336  */
 337 #define BOOTM_SIZE      __stringify(0xa000000)
 338 #define KERNEL_ADDR_R   __stringify(SDRAM_OFFSET(0080000))
 339 #define FDT_ADDR_R      __stringify(SDRAM_OFFSET(FA00000))
 340 #define SCRIPT_ADDR_R   __stringify(SDRAM_OFFSET(FC00000))
 341 #define PXEFILE_ADDR_R  __stringify(SDRAM_OFFSET(FD00000))
 342 #define RAMDISK_ADDR_R  __stringify(SDRAM_OFFSET(FE00000))
 343
 344 #else
 345 /*
 346  * 160M RAM (256M minimum minus 64MB heap + 32MB for u-boot, stack, fb, etc.
 347  * 32M uncompressed kernel, 16M compressed kernel, 1M fdt,
 348  * 1M script, 1M pxe and the ramdisk at the end.
 349  */
 350 #ifndef CONFIG_MACH_SUN8I_V3S
 351 #define BOOTM_SIZE     __stringify(0xa000000)
 352 #define KERNEL_ADDR_R  __stringify(SDRAM_OFFSET(2000000))
 353 #define FDT_ADDR_R     __stringify(SDRAM_OFFSET(3000000))
 354 #define SCRIPT_ADDR_R  __stringify(SDRAM_OFFSET(3100000))
 355 #define PXEFILE_ADDR_R __stringify(SDRAM_OFFSET(3200000))
 356 #define RAMDISK_ADDR_R __stringify(SDRAM_OFFSET(3300000))
 357 #else
 358 /*
 359  * 64M RAM minus 2MB heap + 16MB for u-boot, stack, fb, etc.
 360  * 16M uncompressed kernel, 8M compressed kernel, 1M fdt,
 361  * 1M script, 1M pxe and the ramdisk at the end.
 362  */
 363 #define BOOTM_SIZE     __stringify(0x2e00000)
 364 #define KERNEL_ADDR_R  __stringify(SDRAM_OFFSET(1000000))
 365 #define FDT_ADDR_R     __stringify(SDRAM_OFFSET(1800000))
 366 #define SCRIPT_ADDR_R  __stringify(SDRAM_OFFSET(1900000))
 367 #define PXEFILE_ADDR_R __stringify(SDRAM_OFFSET(1A00000))
 368 #define RAMDISK_ADDR_R __stringify(SDRAM_OFFSET(1B00000))
 369 #endif
 370 #endif
 371
 372 #define MEM_LAYOUT_ENV_SETTINGS \
 373         "bootm_size=" BOOTM_SIZE "\0" \
 374         "kernel_addr_r=" KERNEL_ADDR_R "\0" \
 375         "fdt_addr_r=" FDT_ADDR_R "\0" \
 376         "scriptaddr=" SCRIPT_ADDR_R "\0" \
 377         "pxefile_addr_r=" PXEFILE_ADDR_R "\0" \
 378         "ramdisk_addr_r=" RAMDISK_ADDR_R "\0"
 379
 380 #define DFU_ALT_INFO_RAM \
 381         "dfu_alt_info_ram=" \
 382         "kernel ram " KERNEL_ADDR_R " 0x1000000;" \
 383         "fdt ram " FDT_ADDR_R " 0x100000;" \
 384         "ramdisk ram " RAMDISK_ADDR_R " 0x4000000\0"
 385
 386 #ifdef CONFIG_MMC
 387 #if CONFIG_MMC_SUNXI_SLOT_EXTRA != -1
 388 #define BOOTENV_DEV_MMC_AUTO(devtypeu, devtypel, instance)              \
 389         BOOTENV_DEV_MMC(MMC, mmc, 0)                                    \
 390         BOOTENV_DEV_MMC(MMC, mmc, 1)                                    \
 391         "bootcmd_mmc_auto="                                             \
 392                 "if test ${mmc_bootdev} -eq 1; then "                   \
 393                         "run bootcmd_mmc1; "                            \
 394                         "run bootcmd_mmc0; "                            \
 395                 "elif test ${mmc_bootdev} -eq 0; then "                 \
 396                         "run bootcmd_mmc0; "                            \
 397                         "run bootcmd_mmc1; "                            \
 398                 "fi\0"
 399
 400 #define BOOTENV_DEV_NAME_MMC_AUTO(devtypeu, devtypel, instance) \
 401         "mmc_auto "
 402
 403 #define BOOT_TARGET_DEVICES_MMC(func) func(MMC_AUTO, mmc_auto, na)
 404 #else
 405 #define BOOT_TARGET_DEVICES_MMC(func) func(MMC, mmc, 0)
 406 #endif
 407 #else
 408 #define BOOT_TARGET_DEVICES_MMC(func)
 409 #endif
 410
 411 #ifdef CONFIG_AHCI
 412 #define BOOT_TARGET_DEVICES_SCSI(func) func(SCSI, scsi, 0)
 413 #else
 414 #define BOOT_TARGET_DEVICES_SCSI(func)
 415 #endif
 416
 417 #ifdef CONFIG_USB_STORAGE
 418 #define BOOT_TARGET_DEVICES_USB(func) func(USB, usb, 0)
 419 #else
 420 #define BOOT_TARGET_DEVICES_USB(func)
 421 #endif
 422
 423 /* FEL boot support, auto-execute boot.scr if a script address was provided */
 424 #define BOOTENV_DEV_FEL(devtypeu, devtypel, instance) \
 425         "bootcmd_fel=" \
 426                 "if test -n ${fel_booted} && test -n ${fel_scriptaddr}; then " \
 427                         "echo '(FEL boot)'; " \
 428                         "source ${fel_scriptaddr}; " \
 429                 "fi\0"
 430 #define BOOTENV_DEV_NAME_FEL(devtypeu, devtypel, instance) \
 431         "fel "
 432
 433 #define BOOT_TARGET_DEVICES(func) \
 434         func(FEL, fel, na) \
 435         BOOT_TARGET_DEVICES_MMC(func) \
 436         BOOT_TARGET_DEVICES_SCSI(func) \
 437         BOOT_TARGET_DEVICES_USB(func) \
 438         func(PXE, pxe, na) \
 439         func(DHCP, dhcp, na)
 440
 441 #ifdef CONFIG_OLD_SUNXI_KERNEL_COMPAT
 442 #define BOOTCMD_SUNXI_COMPAT \
 443         "bootcmd_sunxi_compat=" \
 444                 "setenv root /dev/mmcblk0p3 rootwait; " \
 445                 "if ext2load mmc 0 0x44000000 uEnv.txt; then " \
 446                         "echo Loaded environment from uEnv.txt; " \
 447                         "env import -t 0x44000000 ${filesize}; " \
 448                 "fi; " \
 449                 "setenv bootargs console=${console} root=${root} ${extraargs}; " \
 450                 "ext2load mmc 0 0x43000000 script.bin && " \
 451                 "ext2load mmc 0 0x48000000 uImage && " \
 452                 "bootm 0x48000000\0"
 453 #else
 454 #define BOOTCMD_SUNXI_COMPAT
 455 #endif
 456
 457 #include <config_distro_bootcmd.h>
 458
 459 #ifdef CONFIG_USB_KEYBOARD
 460 #define CONSOLE_STDIN_SETTINGS \
 461         "preboot=usb start\0" \
 462         "stdin=serial,usbkbd\0"
 463 #else
 464 #define CONSOLE_STDIN_SETTINGS \
 465         "stdin=serial\0"
 466 #endif
 467
 468 #ifdef CONFIG_VIDEO
 469 #define CONSOLE_STDOUT_SETTINGS \
 470         "stdout=serial,vga\0" \
 471         "stderr=serial,vga\0"
 472 #elif CONFIG_DM_VIDEO
 473 #define CONFIG_SYS_WHITE_ON_BLACK
 474 #define CONSOLE_STDOUT_SETTINGS \
 475         "stdout=serial,vidconsole\0" \
 476         "stderr=serial,vidconsole\0"
 477 #else
 478 #define CONSOLE_STDOUT_SETTINGS \
 479         "stdout=serial\0" \
 480         "stderr=serial\0"
 481 #endif
 482
 483 #ifdef CONFIG_MTDIDS_DEFAULT
 484 #define SUNXI_MTDIDS_DEFAULT \
 485         "mtdids=" CONFIG_MTDIDS_DEFAULT "\0"
 486 #else
 487 #define SUNXI_MTDIDS_DEFAULT
 488 #endif
 489
 490 #ifdef CONFIG_MTDPARTS_DEFAULT
 491 #define SUNXI_MTDPARTS_DEFAULT \
 492         "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0"
 493 #else
 494 #define SUNXI_MTDPARTS_DEFAULT
 495 #endif
 496
 497 #define PARTS_DEFAULT \
 498         "name=loader1,start=8k,size=32k,uuid=${uuid_gpt_loader1};" \
 499         "name=loader2,size=984k,uuid=${uuid_gpt_loader2};" \
 500         "name=esp,size=128M,bootable,uuid=${uuid_gpt_esp};" \
 501         "name=system,size=-,uuid=${uuid_gpt_system};"
 502
 503 #define UUID_GPT_ESP "c12a7328-f81f-11d2-ba4b-00a0c93ec93b"
 504
 505 #ifdef CONFIG_ARM64
 506 #define UUID_GPT_SYSTEM "b921b045-1df0-41c3-af44-4c6f280d3fae"
 507 #else
 508 #define UUID_GPT_SYSTEM "69dad710-2ce4-4e3c-b16c-21a1d49abed3"
 509 #endif
 510
 511 #define CONSOLE_ENV_SETTINGS \
 512         CONSOLE_STDIN_SETTINGS \
 513         CONSOLE_STDOUT_SETTINGS
 514
 515 #ifdef CONFIG_ARM64
 516 #define FDTFILE "allwinner/" CONFIG_DEFAULT_DEVICE_TREE ".dtb"
 517 #else
 518 #define FDTFILE CONFIG_DEFAULT_DEVICE_TREE ".dtb"
 519 #endif
 520
 521 #define CONFIG_EXTRA_ENV_SETTINGS \
 522         CONSOLE_ENV_SETTINGS \
 523         MEM_LAYOUT_ENV_SETTINGS \
 524         DFU_ALT_INFO_RAM \
 525         "fdtfile=" FDTFILE "\0" \
 526         "console=ttyS0,115200\0" \
 527         SUNXI_MTDIDS_DEFAULT \
 528         SUNXI_MTDPARTS_DEFAULT \
 529         "uuid_gpt_esp=" UUID_GPT_ESP "\0" \
 530         "uuid_gpt_system=" UUID_GPT_SYSTEM "\0" \
 531         "partitions=" PARTS_DEFAULT "\0" \
 532         BOOTCMD_SUNXI_COMPAT \
 533         BOOTENV
 534
 535 #else /* ifndef CONFIG_SPL_BUILD */
 536 #define CONFIG_EXTRA_ENV_SETTINGS
 537 #endif
 538
 539 #endif /* _SUNXI_COMMON_CONFIG_H */