include/configs/sunxi-common.h

   1 /*
   2  * (C) Copyright 2012-2012 Henrik Nordstrom <henrik@henriknordstrom.net>
   3  *
   4  * (C) Copyright 2007-2011
   5  * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
   6  * Tom Cubie <tangliang@allwinnertech.com>
   7  *
   8  * Configuration settings for the Allwinner sunxi series of boards.
   9  *
  10  * SPDX-License-Identifier:     GPL-2.0+
  11  */
  12
  13 #ifndef _SUNXI_COMMON_CONFIG_H
  14 #define _SUNXI_COMMON_CONFIG_H
  15
  16 #include <asm/arch/cpu.h>
  17 #include <linux/stringify.h>
  18
  19 #ifdef CONFIG_OLD_SUNXI_KERNEL_COMPAT
  20 /*
  21  * The U-Boot workarounds bugs in the outdated buggy sunxi-3.4 kernels at the
  22  * expense of restricting some features, so the regular machine id values can
  23  * be used.
  24  */
  25 # define CONFIG_MACH_TYPE_COMPAT_REV    0
  26 #else
  27 /*
  28  * A compatibility guard to prevent loading outdated buggy sunxi-3.4 kernels.
  29  * Only sunxi-3.4 kernels with appropriate fixes applied are able to pass
  30  * beyond the machine id check.
  31  */
  32 # define CONFIG_MACH_TYPE_COMPAT_REV    1
  33 #endif
  34
  35 /*
  36  * High Level Configuration Options
  37  */
  38 #if defined(CONFIG_SPL_BUILD) && !defined(CONFIG_ARM64)
  39 #define CONFIG_SYS_THUMB_BUILD  /* Thumbs mode to save space in SPL */
  40 #endif
  41
  42 /* Serial & console */
  43 #define CONFIG_SYS_NS16550_SERIAL
  44 /* ns16550 reg in the low bits of cpu reg */
  45 #define CONFIG_SYS_NS16550_CLK          24000000
  46 #ifndef CONFIG_DM_SERIAL
  47 # define CONFIG_SYS_NS16550_REG_SIZE    -4
  48 # define CONFIG_SYS_NS16550_COM1                SUNXI_UART0_BASE
  49 # define CONFIG_SYS_NS16550_COM2                SUNXI_UART1_BASE
  50 # define CONFIG_SYS_NS16550_COM3                SUNXI_UART2_BASE
  51 # define CONFIG_SYS_NS16550_COM4                SUNXI_UART3_BASE
  52 # define CONFIG_SYS_NS16550_COM5                SUNXI_R_UART_BASE
  53 #endif
  54
  55 /* CPU */
  56 #define CONFIG_TIMER_CLK_FREQ           24000000
  57
  58 /*
  59  * The DRAM Base differs between some models. We cannot use macros for the
  60  * CONFIG_FOO defines which contain the DRAM base address since they end
  61  * up unexpanded in include/autoconf.mk .
  62  *
  63  * So we have to have this #ifdef #else #endif block for these.
  64  */
  65 #ifdef CONFIG_MACH_SUN9I
  66 #define SDRAM_OFFSET(x) 0x2##x
  67 #define CONFIG_SYS_SDRAM_BASE           0x20000000
  68 #define CONFIG_SYS_LOAD_ADDR            0x22000000 /* default load address */
  69 #define CONFIG_SYS_TEXT_BASE            0x2a000000
  70 /* Note SPL_STACK_R_ADDR is set through Kconfig, we include it here
  71  * since it needs to fit in with the other values. By also #defining it
  72  * we get warnings if the Kconfig value mismatches. */
  73 #define CONFIG_SPL_STACK_R_ADDR         0x2fe00000
  74 #define CONFIG_SPL_BSS_START_ADDR       0x2ff80000
  75 #else
  76 #define SDRAM_OFFSET(x) 0x4##x
  77 #define CONFIG_SYS_SDRAM_BASE           0x40000000
  78 #define CONFIG_SYS_LOAD_ADDR            0x42000000 /* default load address */
  79 #define CONFIG_SYS_TEXT_BASE            0x4a000000
  80 /* Note SPL_STACK_R_ADDR is set through Kconfig, we include it here
  81  * since it needs to fit in with the other values. By also #defining it
  82  * we get warnings if the Kconfig value mismatches. */
  83 #define CONFIG_SPL_STACK_R_ADDR         0x4fe00000
  84 #define CONFIG_SPL_BSS_START_ADDR       0x4ff80000
  85 #endif
  86
  87 #define CONFIG_SPL_BSS_MAX_SIZE         0x00080000 /* 512 KiB */
  88
  89 #if defined(CONFIG_MACH_SUN9I) || defined(CONFIG_MACH_SUN50I)
  90 /*
  91  * The A80's A1 sram starts at 0x00010000 rather then at 0x00000000 and is
  92  * slightly bigger. Note that it is possible to map the first 32 KiB of the
  93  * A1 at 0x00000000 like with older SoCs by writing 0x16aa0001 to the
  94  * undocumented 0x008000e0 SYS_CTRL register. Where the 16aa is a key and
  95  * the 1 actually activates the mapping of the first 32 KiB to 0x00000000.
  96  */
  97 #define CONFIG_SYS_INIT_RAM_ADDR        0x10000
  98 #define CONFIG_SYS_INIT_RAM_SIZE        0x08000 /* FIXME: 40 KiB ? */
  99 #else
 100 #define CONFIG_SYS_INIT_RAM_ADDR        0x0
 101 #define CONFIG_SYS_INIT_RAM_SIZE        0x8000  /* 32 KiB */
 102 #endif
 103
 104 #define CONFIG_SYS_INIT_SP_OFFSET \
 105         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 106 #define CONFIG_SYS_INIT_SP_ADDR \
 107         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 108
 109 #define CONFIG_NR_DRAM_BANKS            1
 110 #define PHYS_SDRAM_0                    CONFIG_SYS_SDRAM_BASE
 111 #define PHYS_SDRAM_0_SIZE               0x80000000 /* 2 GiB */
 112
 113 #ifdef CONFIG_AHCI
 114 #define CONFIG_LIBATA
 115 #define CONFIG_SCSI_AHCI
 116 #define CONFIG_SCSI_AHCI_PLAT
 117 #define CONFIG_SUNXI_AHCI
 118 #define CONFIG_SYS_64BIT_LBA
 119 #define CONFIG_SYS_SCSI_MAX_SCSI_ID     1
 120 #define CONFIG_SYS_SCSI_MAX_LUN         1
 121 #define CONFIG_SYS_SCSI_MAX_DEVICE      (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
 122                                          CONFIG_SYS_SCSI_MAX_LUN)
 123 #define CONFIG_SCSI
 124 #endif
 125
 126 #define CONFIG_SETUP_MEMORY_TAGS
 127 #define CONFIG_CMDLINE_TAG
 128 #define CONFIG_INITRD_TAG
 129 #define CONFIG_SERIAL_TAG
 130
 131 #ifdef CONFIG_NAND_SUNXI
 132 #define CONFIG_SYS_NAND_MAX_ECCPOS 1664
 133 #define CONFIG_SYS_NAND_ONFI_DETECTION
 134 #define CONFIG_SYS_MAX_NAND_DEVICE 8
 135 #endif
 136
 137 #ifdef CONFIG_SPL_SPI_SUNXI
 138 #define CONFIG_SYS_SPI_U_BOOT_OFFS      0x8000
 139 #endif
 140
 141 /* mmc config */
 142 #ifdef CONFIG_MMC
 143 #define CONFIG_GENERIC_MMC
 144 #define CONFIG_MMC_SUNXI
 145 #define CONFIG_MMC_SUNXI_SLOT           0
 146 #define CONFIG_ENV_IS_IN_MMC
 147 #define CONFIG_SYS_MMC_ENV_DEV          0       /* first detected MMC controller */
 148 #define CONFIG_SYS_MMC_MAX_DEVICE       4
 149 #endif
 150
 151 /* 64MB of malloc() pool */
 152 #define CONFIG_SYS_MALLOC_LEN           (CONFIG_ENV_SIZE + (64 << 20))
 153
 154 /*
 155  * Miscellaneous configurable options
 156  */
 157 #define CONFIG_SYS_CBSIZE       1024    /* Console I/O Buffer Size */
 158 #define CONFIG_SYS_PBSIZE       1024    /* Print Buffer Size */
 159 #define CONFIG_SYS_MAXARGS      16      /* max number of command args */
 160
 161 /* Boot Argument Buffer Size */
 162 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE
 163
 164 /* standalone support */
 165 #define CONFIG_STANDALONE_LOAD_ADDR     CONFIG_SYS_LOAD_ADDR
 166
 167 /* baudrate */
 168 #define CONFIG_BAUDRATE                 115200
 169
 170 /* The stack sizes are set up in start.S using the settings below */
 171 #define CONFIG_STACKSIZE                (256 << 10)     /* 256 KiB */
 172
 173 /* FLASH and environment organization */
 174
 175 #define CONFIG_SYS_NO_FLASH
 176
 177 #define CONFIG_SYS_MONITOR_LEN          (768 << 10)     /* 768 KiB */
 178
 179 #define CONFIG_ENV_OFFSET               (544 << 10) /* (8 + 24 + 512) KiB */
 180 #define CONFIG_ENV_SIZE                 (128 << 10)     /* 128 KiB */
 181
 182 #define CONFIG_FAT_WRITE        /* enable write access */
 183
 184 #define CONFIG_SPL_FRAMEWORK
 185
 186 #ifndef CONFIG_ARM64            /* AArch64 FEL support is not ready yet */
 187 #define CONFIG_SPL_BOARD_LOAD_IMAGE
 188 #endif
 189
 190 #if defined(CONFIG_MACH_SUN9I)
 191 #define CONFIG_SPL_TEXT_BASE            0x10040         /* sram start+header */
 192 #define CONFIG_SPL_MAX_SIZE             0x5fc0          /* ? KiB on sun9i */
 193 #elif defined(CONFIG_MACH_SUN50I)
 194 #define CONFIG_SPL_TEXT_BASE            0x10040         /* sram start+header */
 195 #define CONFIG_SPL_MAX_SIZE             0x7fc0          /* 32 KiB on sun50i */
 196 #else
 197 #define CONFIG_SPL_TEXT_BASE            0x40            /* sram start+header */
 198 #define CONFIG_SPL_MAX_SIZE             0x5fc0          /* 24KB on sun4i/sun7i */
 199 #endif
 200
 201 #ifndef CONFIG_ARM64
 202 #define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv7/sunxi/u-boot-spl.lds"
 203 #endif
 204
 205 #define CONFIG_SPL_PAD_TO               32768           /* decimal for 'dd' */
 206
 207 #if defined(CONFIG_MACH_SUN9I) || defined(CONFIG_MACH_SUN50I)
 208 /* FIXME: 40 KiB instead of 32 KiB ? */
 209 #define LOW_LEVEL_SRAM_STACK            0x00018000
 210 #define CONFIG_SPL_STACK                LOW_LEVEL_SRAM_STACK
 211 #else
 212 /* end of 32 KiB in sram */
 213 #define LOW_LEVEL_SRAM_STACK            0x00008000 /* End of sram */
 214 #define CONFIG_SPL_STACK                LOW_LEVEL_SRAM_STACK
 215 #endif
 216
 217 /* I2C */
 218 #if defined CONFIG_AXP152_POWER || defined CONFIG_AXP209_POWER || \
 219     defined CONFIG_SY8106A_POWER
 220 #endif
 221
 222 #if defined CONFIG_I2C0_ENABLE || defined CONFIG_I2C1_ENABLE || \
 223     defined CONFIG_I2C2_ENABLE || defined CONFIG_I2C3_ENABLE || \
 224     defined CONFIG_I2C4_ENABLE || defined CONFIG_R_I2C_ENABLE
 225 #define CONFIG_SYS_I2C
 226 #define CONFIG_SYS_I2C_MVTWSI
 227 #define CONFIG_SYS_I2C_SPEED            400000
 228 #define CONFIG_SYS_I2C_SLAVE            0x7f
 229 #endif
 230
 231 #if defined CONFIG_VIDEO_LCD_PANEL_I2C && !(defined CONFIG_SPL_BUILD)
 232 #define CONFIG_SYS_I2C_SOFT
 233 #define CONFIG_SYS_I2C_SOFT_SPEED       50000
 234 #define CONFIG_SYS_I2C_SOFT_SLAVE       0x00
 235 /* We use pin names in Kconfig and sunxi_name_to_gpio() */
 236 #define CONFIG_SOFT_I2C_GPIO_SDA        soft_i2c_gpio_sda
 237 #define CONFIG_SOFT_I2C_GPIO_SCL        soft_i2c_gpio_scl
 238 #ifndef __ASSEMBLY__
 239 extern int soft_i2c_gpio_sda;
 240 extern int soft_i2c_gpio_scl;
 241 #endif
 242 #define CONFIG_VIDEO_LCD_I2C_BUS        0 /* The lcd panel soft i2c is bus 0 */
 243 #define CONFIG_SYS_SPD_BUS_NUM          1 /* And the axp209 i2c bus is bus 1 */
 244 #else
 245 #define CONFIG_SYS_SPD_BUS_NUM          0 /* The axp209 i2c bus is bus 0 */
 246 #define CONFIG_VIDEO_LCD_I2C_BUS        -1 /* NA, but necessary to compile */
 247 #endif
 248
 249 /* PMU */
 250 #if defined CONFIG_AXP152_POWER || defined CONFIG_AXP209_POWER || \
 251     defined CONFIG_AXP221_POWER || defined CONFIG_AXP818_POWER || \
 252     defined CONFIG_SY8106A_POWER
 253 #endif
 254
 255 #ifndef CONFIG_CONS_INDEX
 256 #define CONFIG_CONS_INDEX              1       /* UART0 */
 257 #endif
 258
 259 #ifdef CONFIG_REQUIRE_SERIAL_CONSOLE
 260 #if CONFIG_CONS_INDEX == 1
 261 #ifdef CONFIG_MACH_SUN9I
 262 #define OF_STDOUT_PATH          "/soc/serial@07000000:115200"
 263 #else
 264 #define OF_STDOUT_PATH          "/soc@01c00000/serial@01c28000:115200"
 265 #endif
 266 #elif CONFIG_CONS_INDEX == 2 && defined(CONFIG_MACH_SUN5I)
 267 #define OF_STDOUT_PATH          "/soc@01c00000/serial@01c28400:115200"
 268 #elif CONFIG_CONS_INDEX == 3 && defined(CONFIG_MACH_SUN8I)
 269 #define OF_STDOUT_PATH          "/soc@01c00000/serial@01c28800:115200"
 270 #elif CONFIG_CONS_INDEX == 5 && defined(CONFIG_MACH_SUN8I)
 271 #define OF_STDOUT_PATH          "/soc@01c00000/serial@01f02800:115200"
 272 #else
 273 #error Unsupported console port nr. Please fix stdout-path in sunxi-common.h.
 274 #endif
 275 #endif /* ifdef CONFIG_REQUIRE_SERIAL_CONSOLE */
 276
 277 /* GPIO */
 278 #define CONFIG_SUNXI_GPIO
 279
 280 #ifdef CONFIG_VIDEO
 281 /*
 282  * The amount of RAM to keep free at the top of RAM when relocating u-boot,
 283  * to use as framebuffer. This must be a multiple of 4096.
 284  */
 285 #define CONFIG_SUNXI_MAX_FB_SIZE (16 << 20)
 286
 287 /* Do we want to initialize a simple FB? */
 288 #define CONFIG_VIDEO_DT_SIMPLEFB
 289
 290 #define CONFIG_VIDEO_SUNXI
 291
 292 #define CONFIG_VIDEO_LOGO
 293 #define CONFIG_VIDEO_STD_TIMINGS
 294 #define CONFIG_I2C_EDID
 295 #define VIDEO_LINE_LEN (pGD->plnSizeX)
 296
 297 /* allow both serial and cfb console. */
 298 /* stop x86 thinking in cfbconsole from trying to init a pc keyboard */
 299
 300 #endif /* CONFIG_VIDEO */
 301
 302 /* Ethernet support */
 303 #ifdef CONFIG_SUNXI_EMAC
 304 #define CONFIG_PHY_ADDR         1
 305 #define CONFIG_MII                      /* MII PHY management           */
 306 #define CONFIG_PHYLIB
 307 #endif
 308
 309 #ifdef CONFIG_SUNXI_GMAC
 310 #define CONFIG_PHY_GIGE                 /* GMAC can use gigabit PHY     */
 311 #define CONFIG_PHY_ADDR         1
 312 #define CONFIG_MII                      /* MII PHY management           */
 313 #define CONFIG_PHY_REALTEK
 314 #endif
 315
 316 #ifdef CONFIG_USB_EHCI_HCD
 317 #define CONFIG_USB_OHCI_NEW
 318 #define CONFIG_USB_OHCI_SUNXI
 319 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 1
 320 #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 1
 321 #endif
 322
 323 #ifdef CONFIG_USB_MUSB_SUNXI
 324 #define CONFIG_USB_MUSB_PIO_ONLY
 325 #endif
 326
 327 #ifdef CONFIG_USB_MUSB_GADGET
 328 #define CONFIG_USB_FUNCTION_FASTBOOT
 329 #define CONFIG_USB_FUNCTION_MASS_STORAGE
 330 #endif
 331
 332 #ifdef CONFIG_USB_FUNCTION_FASTBOOT
 333 #define CONFIG_CMD_FASTBOOT
 334 #define CONFIG_FASTBOOT_BUF_ADDR        CONFIG_SYS_LOAD_ADDR
 335 #define CONFIG_FASTBOOT_BUF_SIZE        0x2000000
 336 #define CONFIG_ANDROID_BOOT_IMAGE
 337
 338 #define CONFIG_FASTBOOT_FLASH
 339
 340 #ifdef CONFIG_MMC
 341 #define CONFIG_FASTBOOT_FLASH_MMC_DEV   0
 342 #define CONFIG_EFI_PARTITION
 343 #endif
 344 #endif
 345
 346 #ifdef CONFIG_USB_FUNCTION_MASS_STORAGE
 347 #endif
 348
 349 #ifdef CONFIG_USB_KEYBOARD
 350 #define CONFIG_PREBOOT
 351 #define CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE
 352 #endif
 353
 354 #if !defined CONFIG_ENV_IS_IN_MMC && \
 355     !defined CONFIG_ENV_IS_IN_NAND && \
 356     !defined CONFIG_ENV_IS_IN_FAT && \
 357     !defined CONFIG_ENV_IS_IN_SPI_FLASH
 358 #define CONFIG_ENV_IS_NOWHERE
 359 #endif
 360
 361 #define CONFIG_MISC_INIT_R
 362
 363 #ifndef CONFIG_SPL_BUILD
 364 #include <config_distro_defaults.h>
 365
 366 #ifdef CONFIG_ARM64
 367 /*
 368  * Boards seem to come with at least 512MB of DRAM.
 369  * The kernel should go at 512K, which is the default text offset (that will
 370  * be adjusted at runtime if needed).
 371  * There is no compression for arm64 kernels (yet), so leave some space
 372  * for really big kernels, say 256MB for now.
 373  * Scripts, PXE and DTBs should go afterwards, leaving the rest for the initrd.
 374  * Align the initrd to a 2MB page.
 375  */
 376 #define KERNEL_ADDR_R   __stringify(SDRAM_OFFSET(0080000))
 377 #define FDT_ADDR_R      __stringify(SDRAM_OFFSET(FA00000))
 378 #define SCRIPT_ADDR_R   __stringify(SDRAM_OFFSET(FC00000))
 379 #define PXEFILE_ADDR_R  __stringify(SDRAM_OFFSET(FD00000))
 380 #define RAMDISK_ADDR_R  __stringify(SDRAM_OFFSET(FE00000))
 381
 382 #else
 383 /*
 384  * 160M RAM (256M minimum minus 64MB heap + 32MB for u-boot, stack, fb, etc.
 385  * 32M uncompressed kernel, 16M compressed kernel, 1M fdt,
 386  * 1M script, 1M pxe and the ramdisk at the end.
 387  */
 388
 389 #define KERNEL_ADDR_R  __stringify(SDRAM_OFFSET(2000000))
 390 #define FDT_ADDR_R     __stringify(SDRAM_OFFSET(3000000))
 391 #define SCRIPT_ADDR_R  __stringify(SDRAM_OFFSET(3100000))
 392 #define PXEFILE_ADDR_R __stringify(SDRAM_OFFSET(3200000))
 393 #define RAMDISK_ADDR_R __stringify(SDRAM_OFFSET(3300000))
 394 #endif
 395
 396 #define MEM_LAYOUT_ENV_SETTINGS \
 397         "bootm_size=0xa000000\0" \
 398         "kernel_addr_r=" KERNEL_ADDR_R "\0" \
 399         "fdt_addr_r=" FDT_ADDR_R "\0" \
 400         "scriptaddr=" SCRIPT_ADDR_R "\0" \
 401         "pxefile_addr_r=" PXEFILE_ADDR_R "\0" \
 402         "ramdisk_addr_r=" RAMDISK_ADDR_R "\0"
 403
 404 #define DFU_ALT_INFO_RAM \
 405         "dfu_alt_info_ram=" \
 406         "kernel ram " KERNEL_ADDR_R " 0x1000000;" \
 407         "fdt ram " FDT_ADDR_R " 0x100000;" \
 408         "ramdisk ram " RAMDISK_ADDR_R " 0x4000000\0"
 409
 410 #ifdef CONFIG_MMC
 411 #define BOOT_TARGET_DEVICES_MMC(func) func(MMC, mmc, 0)
 412 #if CONFIG_MMC_SUNXI_SLOT_EXTRA != -1
 413 #define BOOT_TARGET_DEVICES_MMC_EXTRA(func) func(MMC, mmc, 1)
 414 #else
 415 #define BOOT_TARGET_DEVICES_MMC_EXTRA(func)
 416 #endif
 417 #else
 418 #define BOOT_TARGET_DEVICES_MMC(func)
 419 #define BOOT_TARGET_DEVICES_MMC_EXTRA(func)
 420 #endif
 421
 422 #ifdef CONFIG_AHCI
 423 #define BOOT_TARGET_DEVICES_SCSI(func) func(SCSI, scsi, 0)
 424 #else
 425 #define BOOT_TARGET_DEVICES_SCSI(func)
 426 #endif
 427
 428 #ifdef CONFIG_USB_STORAGE
 429 #define BOOT_TARGET_DEVICES_USB(func) func(USB, usb, 0)
 430 #else
 431 #define BOOT_TARGET_DEVICES_USB(func)
 432 #endif
 433
 434 /* FEL boot support, auto-execute boot.scr if a script address was provided */
 435 #define BOOTENV_DEV_FEL(devtypeu, devtypel, instance) \
 436         "bootcmd_fel=" \
 437                 "if test -n ${fel_booted} && test -n ${fel_scriptaddr}; then " \
 438                         "echo '(FEL boot)'; " \
 439                         "source ${fel_scriptaddr}; " \
 440                 "fi\0"
 441 #define BOOTENV_DEV_NAME_FEL(devtypeu, devtypel, instance) \
 442         "fel "
 443
 444 #define BOOT_TARGET_DEVICES(func) \
 445         func(FEL, fel, na) \
 446         BOOT_TARGET_DEVICES_MMC(func) \
 447         BOOT_TARGET_DEVICES_MMC_EXTRA(func) \
 448         BOOT_TARGET_DEVICES_SCSI(func) \
 449         BOOT_TARGET_DEVICES_USB(func) \
 450         func(PXE, pxe, na) \
 451         func(DHCP, dhcp, na)
 452
 453 #ifdef CONFIG_OLD_SUNXI_KERNEL_COMPAT
 454 #define BOOTCMD_SUNXI_COMPAT \
 455         "bootcmd_sunxi_compat=" \
 456                 "setenv root /dev/mmcblk0p3 rootwait; " \
 457                 "if ext2load mmc 0 0x44000000 uEnv.txt; then " \
 458                         "echo Loaded environment from uEnv.txt; " \
 459                         "env import -t 0x44000000 ${filesize}; " \
 460                 "fi; " \
 461                 "setenv bootargs console=${console} root=${root} ${extraargs}; " \
 462                 "ext2load mmc 0 0x43000000 script.bin && " \
 463                 "ext2load mmc 0 0x48000000 uImage && " \
 464                 "bootm 0x48000000\0"
 465 #else
 466 #define BOOTCMD_SUNXI_COMPAT
 467 #endif
 468
 469 #include <config_distro_bootcmd.h>
 470
 471 #ifdef CONFIG_USB_KEYBOARD
 472 #define CONSOLE_STDIN_SETTINGS \
 473         "preboot=usb start\0" \
 474         "stdin=serial,usbkbd\0"
 475 #else
 476 #define CONSOLE_STDIN_SETTINGS \
 477         "stdin=serial\0"
 478 #endif
 479
 480 #ifdef CONFIG_VIDEO
 481 #define CONSOLE_STDOUT_SETTINGS \
 482         "stdout=serial,vga\0" \
 483         "stderr=serial,vga\0"
 484 #else
 485 #define CONSOLE_STDOUT_SETTINGS \
 486         "stdout=serial\0" \
 487         "stderr=serial\0"
 488 #endif
 489
 490 #define CONSOLE_ENV_SETTINGS \
 491         CONSOLE_STDIN_SETTINGS \
 492         CONSOLE_STDOUT_SETTINGS
 493
 494 #define CONFIG_EXTRA_ENV_SETTINGS \
 495         CONSOLE_ENV_SETTINGS \
 496         MEM_LAYOUT_ENV_SETTINGS \
 497         DFU_ALT_INFO_RAM \
 498         "fdtfile=" CONFIG_DEFAULT_DEVICE_TREE ".dtb\0" \
 499         "console=ttyS0,115200\0" \
 500         BOOTCMD_SUNXI_COMPAT \
 501         BOOTENV
 502
 503 #else /* ifndef CONFIG_SPL_BUILD */
 504 #define CONFIG_EXTRA_ENV_SETTINGS
 505 #endif
 506
 507 #endif /* _SUNXI_COMMON_CONFIG_H */