include/configs/t4qds.h

   1 /*
   2  * Copyright 2011-2012 Freescale Semiconductor, Inc.
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 /*
   8  * Corenet DS style board configuration file
   9  */
  10 #ifndef __T4QDS_H
  11 #define __T4QDS_H
  12
  13 #define CONFIG_SYS_GENERIC_BOARD
  14 #define CONFIG_DISPLAY_BOARDINFO
  15 #define CONFIG_CMD_REGINFO
  16
  17 /* High Level Configuration Options */
  18 #define CONFIG_BOOKE
  19 #define CONFIG_E500                     /* BOOKE e500 family */
  20 #define CONFIG_E500MC                   /* BOOKE e500mc family */
  21 #define CONFIG_SYS_BOOK3E_HV            /* Category E.HV supported */
  22 #define CONFIG_MP                       /* support multiple processors */
  23
  24 #ifndef CONFIG_SYS_TEXT_BASE
  25 #define CONFIG_SYS_TEXT_BASE    0xeff40000
  26 #endif
  27
  28 #ifndef CONFIG_RESET_VECTOR_ADDRESS
  29 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
  30 #endif
  31
  32 #define CONFIG_SYS_FSL_CPC              /* Corenet Platform Cache */
  33 #define CONFIG_SYS_NUM_CPC              CONFIG_NUM_DDR_CONTROLLERS
  34 #define CONFIG_FSL_IFC                  /* Enable IFC Support */
  35 #define CONFIG_PCI                      /* Enable PCI/PCIE */
  36 #define CONFIG_PCIE1                    /* PCIE controler 1 */
  37 #define CONFIG_PCIE2                    /* PCIE controler 2 */
  38 #define CONFIG_PCIE3                    /* PCIE controler 3 */
  39 #define CONFIG_FSL_PCI_INIT             /* Use common FSL init code */
  40 #define CONFIG_SYS_PCI_64BIT            /* enable 64-bit PCI resources */
  41
  42 #define CONFIG_SYS_SRIO
  43 #define CONFIG_SRIO1                    /* SRIO port 1 */
  44 #define CONFIG_SRIO2                    /* SRIO port 2 */
  45
  46 #define CONFIG_FSL_LAW                  /* Use common FSL init code */
  47
  48 #define CONFIG_ENV_OVERWRITE
  49
  50 /*
  51  * These can be toggled for performance analysis, otherwise use default.
  52  */
  53 #define CONFIG_SYS_CACHE_STASHING
  54 #define CONFIG_BTB                      /* toggle branch predition */
  55 #ifdef CONFIG_DDR_ECC
  56 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
  57 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
  58 #endif
  59
  60 #define CONFIG_ENABLE_36BIT_PHYS
  61
  62 #define CONFIG_ADDR_MAP
  63 #define CONFIG_SYS_NUM_ADDR_MAP         64      /* number of TLB1 entries */
  64
  65 #define CONFIG_SYS_MEMTEST_START        0x00200000      /* memtest works on */
  66 #define CONFIG_SYS_MEMTEST_END          0x00400000
  67 #define CONFIG_SYS_ALT_MEMTEST
  68 #define CONFIG_PANIC_HANG       /* do not reset board on panic */
  69
  70 /*
  71  *  Config the L3 Cache as L3 SRAM
  72  */
  73 #define CONFIG_SYS_INIT_L3_ADDR         0xFFFC0000
  74 #define CONFIG_SYS_L3_SIZE              (512 << 10)
  75 #define CONFIG_SPL_GD_ADDR              (CONFIG_SYS_INIT_L3_ADDR + 32 * 1024)
  76 #ifdef CONFIG_RAMBOOT_PBL
  77 #define CONFIG_ENV_ADDR                 (CONFIG_SPL_GD_ADDR + 4 * 1024)
  78 #endif
  79 #define CONFIG_SPL_RELOC_MALLOC_ADDR    (CONFIG_SPL_GD_ADDR + 12 * 1024)
  80 #define CONFIG_SPL_RELOC_MALLOC_SIZE    (50 << 10)
  81 #define CONFIG_SPL_RELOC_STACK          (CONFIG_SPL_GD_ADDR + 64 * 1024)
  82 #define CONFIG_SPL_RELOC_STACK_SIZE     (22 << 10)
  83
  84 #define CONFIG_SYS_DCSRBAR              0xf0000000
  85 #define CONFIG_SYS_DCSRBAR_PHYS         0xf00000000ull
  86
  87 /*
  88  * DDR Setup
  89  */
  90 #define CONFIG_VERY_BIG_RAM
  91 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
  92 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
  93
  94 /* CONFIG_NUM_DDR_CONTROLLERS is defined in include/asm/config_mpc85xx.h */
  95 #define CONFIG_DIMM_SLOTS_PER_CTLR      2
  96 #define CONFIG_CHIP_SELECTS_PER_CTRL    4
  97 #define CONFIG_FSL_DDR_FIRST_SLOT_QUAD_CAPABLE
  98
  99 #define CONFIG_DDR_SPD
 100 #define CONFIG_SYS_FSL_DDR3
 101
 102
 103 /*
 104  * IFC Definitions
 105  */
 106 #define CONFIG_SYS_FLASH_BASE   0xe0000000
 107 #define CONFIG_SYS_FLASH_BASE_PHYS      (0xf00000000ull | CONFIG_SYS_FLASH_BASE)
 108
 109
 110 #ifdef CONFIG_SPL_BUILD
 111 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
 112 #else
 113 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
 114 #endif
 115
 116 #define CONFIG_BOARD_EARLY_INIT_R       /* call board_early_init_r function */
 117 #define CONFIG_MISC_INIT_R
 118
 119 #define CONFIG_HWCONFIG
 120
 121 /* define to use L1 as initial stack */
 122 #define CONFIG_L1_INIT_RAM
 123 #define CONFIG_SYS_INIT_RAM_LOCK
 124 #define CONFIG_SYS_INIT_RAM_ADDR        0xfdd00000      /* Initial L1 address */
 125 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH      0xf
 126 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW       0xfe0ec000
 127 /* The assembler doesn't like typecast */
 128 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
 129         ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
 130           CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
 131 #define CONFIG_SYS_INIT_RAM_SIZE                0x00004000
 132
 133 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - \
 134                                         GENERATED_GBL_DATA_SIZE)
 135 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 136
 137 #define CONFIG_SYS_MONITOR_LEN          (768 * 1024)
 138 #define CONFIG_SYS_MALLOC_LEN           (4 * 1024 * 1024)
 139
 140 /* Serial Port - controlled on board with jumper J8
 141  * open - index 2
 142  * shorted - index 1
 143  */
 144 #define CONFIG_CONS_INDEX       1
 145 #define CONFIG_SYS_NS16550
 146 #define CONFIG_SYS_NS16550_SERIAL
 147 #define CONFIG_SYS_NS16550_REG_SIZE     1
 148 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0)/2)
 149
 150 #define CONFIG_SYS_BAUDRATE_TABLE       \
 151         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 152
 153 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500)
 154 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600)
 155 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
 156 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
 157
 158 /* Use the HUSH parser */
 159 #define CONFIG_SYS_HUSH_PARSER
 160 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
 161
 162 /* pass open firmware flat tree */
 163 #define CONFIG_OF_LIBFDT
 164 #define CONFIG_OF_BOARD_SETUP
 165 #define CONFIG_OF_STDOUT_VIA_ALIAS
 166
 167 /* new uImage format support */
 168 #define CONFIG_FIT
 169 #define CONFIG_FIT_VERBOSE      /* enable fit_format_{error,warning}() */
 170
 171 /* I2C */
 172 #define CONFIG_SYS_I2C
 173 #define CONFIG_SYS_I2C_FSL
 174 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 175 #define CONFIG_SYS_FSL_I2C_OFFSET       0x118000
 176 #define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
 177 #define CONFIG_SYS_FSL_I2C2_OFFSET      0x118100
 178
 179 /*
 180  * RapidIO
 181  */
 182 #define CONFIG_SYS_SRIO1_MEM_VIRT       0xa0000000
 183 #define CONFIG_SYS_SRIO1_MEM_PHYS       0xc20000000ull
 184 #define CONFIG_SYS_SRIO1_MEM_SIZE       0x10000000      /* 256M */
 185
 186 #define CONFIG_SYS_SRIO2_MEM_VIRT       0xb0000000
 187 #define CONFIG_SYS_SRIO2_MEM_PHYS       0xc30000000ull
 188 #define CONFIG_SYS_SRIO2_MEM_SIZE       0x10000000      /* 256M */
 189
 190 /*
 191  * General PCI
 192  * Memory space is mapped 1-1, but I/O space must start from 0.
 193  */
 194
 195 /* controller 1, direct to uli, tgtid 3, Base address 20000 */
 196 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
 197 #define CONFIG_SYS_PCIE1_MEM_BUS        0xe0000000
 198 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
 199 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x20000000      /* 512M */
 200 #define CONFIG_SYS_PCIE1_IO_VIRT        0xf8000000
 201 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
 202 #define CONFIG_SYS_PCIE1_IO_PHYS        0xff8000000ull
 203 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
 204
 205 /* controller 2, Slot 2, tgtid 2, Base address 201000 */
 206 #define CONFIG_SYS_PCIE2_MEM_VIRT       0xa0000000
 207 #define CONFIG_SYS_PCIE2_MEM_BUS        0xe0000000
 208 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xc20000000ull
 209 #define CONFIG_SYS_PCIE2_MEM_SIZE       0x20000000      /* 512M */
 210 #define CONFIG_SYS_PCIE2_IO_VIRT        0xf8010000
 211 #define CONFIG_SYS_PCIE2_IO_BUS         0x00000000
 212 #define CONFIG_SYS_PCIE2_IO_PHYS        0xff8010000ull
 213 #define CONFIG_SYS_PCIE2_IO_SIZE        0x00010000      /* 64k */
 214
 215 /* controller 3, Slot 1, tgtid 1, Base address 202000 */
 216 #define CONFIG_SYS_PCIE3_MEM_VIRT       0xc0000000
 217 #define CONFIG_SYS_PCIE3_MEM_BUS        0xe0000000
 218 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc40000000ull
 219 #define CONFIG_SYS_PCIE3_MEM_SIZE       0x20000000      /* 512M */
 220 #define CONFIG_SYS_PCIE3_IO_VIRT        0xf8020000
 221 #define CONFIG_SYS_PCIE3_IO_BUS         0x00000000
 222 #define CONFIG_SYS_PCIE3_IO_PHYS        0xff8020000ull
 223 #define CONFIG_SYS_PCIE3_IO_SIZE        0x00010000      /* 64k */
 224
 225 /* controller 4, Base address 203000 */
 226 #define CONFIG_SYS_PCIE4_MEM_BUS        0xe0000000
 227 #define CONFIG_SYS_PCIE4_MEM_PHYS       0xc60000000ull
 228 #define CONFIG_SYS_PCIE4_MEM_SIZE       0x20000000      /* 512M */
 229 #define CONFIG_SYS_PCIE4_IO_BUS         0x00000000
 230 #define CONFIG_SYS_PCIE4_IO_PHYS        0xff8030000ull
 231 #define CONFIG_SYS_PCIE4_IO_SIZE        0x00010000      /* 64k */
 232
 233 #ifdef CONFIG_PCI
 234 #define CONFIG_PCI_INDIRECT_BRIDGE
 235 #define CONFIG_NET_MULTI
 236 #define CONFIG_PCI_PNP                  /* do pci plug-and-play */
 237 #define CONFIG_E1000
 238
 239 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 240 #define CONFIG_DOS_PARTITION
 241 #endif  /* CONFIG_PCI */
 242
 243 /* SATA */
 244 #ifdef CONFIG_FSL_SATA_V2
 245 #define CONFIG_LIBATA
 246 #define CONFIG_FSL_SATA
 247
 248 #define CONFIG_SYS_SATA_MAX_DEVICE      2
 249 #define CONFIG_SATA1
 250 #define CONFIG_SYS_SATA1                CONFIG_SYS_MPC85xx_SATA1_ADDR
 251 #define CONFIG_SYS_SATA1_FLAGS          FLAGS_DMA
 252 #define CONFIG_SATA2
 253 #define CONFIG_SYS_SATA2                CONFIG_SYS_MPC85xx_SATA2_ADDR
 254 #define CONFIG_SYS_SATA2_FLAGS          FLAGS_DMA
 255
 256 #define CONFIG_LBA48
 257 #define CONFIG_CMD_SATA
 258 #define CONFIG_DOS_PARTITION
 259 #define CONFIG_CMD_EXT2
 260 #endif
 261
 262 #ifdef CONFIG_FMAN_ENET
 263 #define CONFIG_MII              /* MII PHY management */
 264 #define CONFIG_ETHPRIME         "FM1@DTSEC1"
 265 #define CONFIG_PHY_GIGE         /* Include GbE speed/duplex detection */
 266 #endif
 267
 268 /*
 269  * Environment
 270  */
 271 #define CONFIG_LOADS_ECHO               /* echo on for serial download */
 272 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
 273
 274 /*
 275  * Command line configuration.
 276  */
 277 #include <config_cmd_default.h>
 278
 279 #define CONFIG_CMD_DHCP
 280 #define CONFIG_CMD_ELF
 281 #define CONFIG_CMD_ERRATA
 282 #define CONFIG_CMD_GREPENV
 283 #define CONFIG_CMD_IRQ
 284 #define CONFIG_CMD_I2C
 285 #define CONFIG_CMD_MII
 286 #define CONFIG_CMD_PING
 287 #define CONFIG_CMD_SETEXPR
 288
 289 #ifdef CONFIG_PCI
 290 #define CONFIG_CMD_PCI
 291 #define CONFIG_CMD_NET
 292 #endif
 293
 294 /*
 295  * Miscellaneous configurable options
 296  */
 297 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 298 #define CONFIG_CMDLINE_EDITING                  /* Command-line editing */
 299 #define CONFIG_AUTO_COMPLETE                    /* add autocompletion support */
 300 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 301 #ifdef CONFIG_CMD_KGDB
 302 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O Buffer Size */
 303 #else
 304 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size */
 305 #endif
 306 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
 307 #define CONFIG_SYS_MAXARGS      16              /* max number of command args */
 308 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
 309
 310 /*
 311  * For booting Linux, the board info and command line data
 312  * have to be in the first 64 MB of memory, since this is
 313  * the maximum mapped by the Linux kernel during initialization.
 314  */
 315 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial map for Linux*/
 316 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 317
 318 #ifdef CONFIG_CMD_KGDB
 319 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 320 #endif
 321
 322 /*
 323  * Environment Configuration
 324  */
 325 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 326 #define CONFIG_BOOTFILE         "uImage"
 327 #define CONFIG_UBOOTPATH        "u-boot.bin"    /* U-Boot image on TFTP server*/
 328
 329 /* default location for tftp and bootm */
 330 #define CONFIG_LOADADDR         1000000
 331
 332
 333 #define CONFIG_BAUDRATE 115200
 334
 335 #define CONFIG_HVBOOT                           \
 336  "setenv bootargs config-addr=0x60000000; "     \
 337  "bootm 0x01000000 - 0x00f00000"
 338
 339 #endif  /* __CONFIG_H */