include/configs/t4qds.h

   1 /*
   2  * Copyright 2011-2012 Freescale Semiconductor, Inc.
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 /*
   8  * Corenet DS style board configuration file
   9  */
  10 #ifndef __T4QDS_H
  11 #define __T4QDS_H
  12
  13 #define CONFIG_DISPLAY_BOARDINFO
  14 #define CONFIG_CMD_REGINFO
  15
  16 /* High Level Configuration Options */
  17 #define CONFIG_BOOKE
  18 #define CONFIG_E500                     /* BOOKE e500 family */
  19 #define CONFIG_E500MC                   /* BOOKE e500mc family */
  20 #define CONFIG_SYS_BOOK3E_HV            /* Category E.HV supported */
  21 #define CONFIG_MP                       /* support multiple processors */
  22
  23 #ifndef CONFIG_SYS_TEXT_BASE
  24 #define CONFIG_SYS_TEXT_BASE    0xeff40000
  25 #endif
  26
  27 #ifndef CONFIG_RESET_VECTOR_ADDRESS
  28 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
  29 #endif
  30
  31 #define CONFIG_SYS_FSL_CPC              /* Corenet Platform Cache */
  32 #define CONFIG_SYS_NUM_CPC              CONFIG_NUM_DDR_CONTROLLERS
  33 #define CONFIG_FSL_IFC                  /* Enable IFC Support */
  34 #define CONFIG_PCI                      /* Enable PCI/PCIE */
  35 #define CONFIG_PCIE1                    /* PCIE controler 1 */
  36 #define CONFIG_PCIE2                    /* PCIE controler 2 */
  37 #define CONFIG_PCIE3                    /* PCIE controler 3 */
  38 #define CONFIG_FSL_PCI_INIT             /* Use common FSL init code */
  39 #define CONFIG_SYS_PCI_64BIT            /* enable 64-bit PCI resources */
  40
  41 #define CONFIG_SYS_SRIO
  42 #define CONFIG_SRIO1                    /* SRIO port 1 */
  43 #define CONFIG_SRIO2                    /* SRIO port 2 */
  44
  45 #define CONFIG_FSL_LAW                  /* Use common FSL init code */
  46
  47 #define CONFIG_ENV_OVERWRITE
  48
  49 /*
  50  * These can be toggled for performance analysis, otherwise use default.
  51  */
  52 #define CONFIG_SYS_CACHE_STASHING
  53 #define CONFIG_BTB                      /* toggle branch predition */
  54 #ifdef CONFIG_DDR_ECC
  55 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
  56 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
  57 #endif
  58
  59 #define CONFIG_ENABLE_36BIT_PHYS
  60
  61 #define CONFIG_ADDR_MAP
  62 #define CONFIG_SYS_NUM_ADDR_MAP         64      /* number of TLB1 entries */
  63
  64 #define CONFIG_SYS_MEMTEST_START        0x00200000      /* memtest works on */
  65 #define CONFIG_SYS_MEMTEST_END          0x00400000
  66 #define CONFIG_SYS_ALT_MEMTEST
  67 #define CONFIG_PANIC_HANG       /* do not reset board on panic */
  68
  69 /*
  70  *  Config the L3 Cache as L3 SRAM
  71  */
  72 #define CONFIG_SYS_INIT_L3_ADDR         0xFFFC0000
  73 #define CONFIG_SYS_L3_SIZE              (512 << 10)
  74 #define CONFIG_SPL_GD_ADDR              (CONFIG_SYS_INIT_L3_ADDR + 32 * 1024)
  75 #ifdef CONFIG_RAMBOOT_PBL
  76 #define CONFIG_ENV_ADDR                 (CONFIG_SPL_GD_ADDR + 4 * 1024)
  77 #endif
  78 #define CONFIG_SPL_RELOC_MALLOC_ADDR    (CONFIG_SPL_GD_ADDR + 12 * 1024)
  79 #define CONFIG_SPL_RELOC_MALLOC_SIZE    (50 << 10)
  80 #define CONFIG_SPL_RELOC_STACK          (CONFIG_SPL_GD_ADDR + 64 * 1024)
  81 #define CONFIG_SPL_RELOC_STACK_SIZE     (22 << 10)
  82
  83 #define CONFIG_SYS_DCSRBAR              0xf0000000
  84 #define CONFIG_SYS_DCSRBAR_PHYS         0xf00000000ull
  85
  86 /*
  87  * DDR Setup
  88  */
  89 #define CONFIG_VERY_BIG_RAM
  90 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
  91 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
  92
  93 /* CONFIG_NUM_DDR_CONTROLLERS is defined in include/asm/config_mpc85xx.h */
  94 #define CONFIG_DIMM_SLOTS_PER_CTLR      2
  95 #define CONFIG_CHIP_SELECTS_PER_CTRL    4
  96 #define CONFIG_FSL_DDR_FIRST_SLOT_QUAD_CAPABLE
  97
  98 #define CONFIG_DDR_SPD
  99 #define CONFIG_SYS_FSL_DDR3
 100
 101 /*
 102  * IFC Definitions
 103  */
 104 #define CONFIG_SYS_FLASH_BASE   0xe0000000
 105 #define CONFIG_SYS_FLASH_BASE_PHYS      (0xf00000000ull | CONFIG_SYS_FLASH_BASE)
 106
 107 #ifdef CONFIG_SPL_BUILD
 108 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
 109 #else
 110 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
 111 #endif
 112
 113 #define CONFIG_BOARD_EARLY_INIT_R       /* call board_early_init_r function */
 114 #define CONFIG_MISC_INIT_R
 115
 116 #define CONFIG_HWCONFIG
 117
 118 /* define to use L1 as initial stack */
 119 #define CONFIG_L1_INIT_RAM
 120 #define CONFIG_SYS_INIT_RAM_LOCK
 121 #define CONFIG_SYS_INIT_RAM_ADDR        0xfdd00000      /* Initial L1 address */
 122 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH      0xf
 123 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW       0xfe03c000
 124 /* The assembler doesn't like typecast */
 125 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
 126         ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
 127           CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
 128 #define CONFIG_SYS_INIT_RAM_SIZE                0x00004000
 129
 130 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - \
 131                                         GENERATED_GBL_DATA_SIZE)
 132 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 133
 134 #define CONFIG_SYS_MONITOR_LEN          (768 * 1024)
 135 #define CONFIG_SYS_MALLOC_LEN           (4 * 1024 * 1024)
 136
 137 /* Serial Port - controlled on board with jumper J8
 138  * open - index 2
 139  * shorted - index 1
 140  */
 141 #define CONFIG_CONS_INDEX       1
 142 #define CONFIG_SYS_NS16550_SERIAL
 143 #define CONFIG_SYS_NS16550_REG_SIZE     1
 144 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0)/2)
 145
 146 #define CONFIG_SYS_BAUDRATE_TABLE       \
 147         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 148
 149 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500)
 150 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600)
 151 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
 152 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
 153
 154 /* I2C */
 155 #define CONFIG_SYS_I2C
 156 #define CONFIG_SYS_I2C_FSL
 157 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 158 #define CONFIG_SYS_FSL_I2C_OFFSET       0x118000
 159 #define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
 160 #define CONFIG_SYS_FSL_I2C2_OFFSET      0x118100
 161
 162 /*
 163  * RapidIO
 164  */
 165 #define CONFIG_SYS_SRIO1_MEM_VIRT       0xa0000000
 166 #define CONFIG_SYS_SRIO1_MEM_PHYS       0xc20000000ull
 167 #define CONFIG_SYS_SRIO1_MEM_SIZE       0x10000000      /* 256M */
 168
 169 #define CONFIG_SYS_SRIO2_MEM_VIRT       0xb0000000
 170 #define CONFIG_SYS_SRIO2_MEM_PHYS       0xc30000000ull
 171 #define CONFIG_SYS_SRIO2_MEM_SIZE       0x10000000      /* 256M */
 172
 173 /*
 174  * General PCI
 175  * Memory space is mapped 1-1, but I/O space must start from 0.
 176  */
 177
 178 /* controller 1, direct to uli, tgtid 3, Base address 20000 */
 179 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
 180 #define CONFIG_SYS_PCIE1_MEM_BUS        0xe0000000
 181 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
 182 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x20000000      /* 512M */
 183 #define CONFIG_SYS_PCIE1_IO_VIRT        0xf8000000
 184 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
 185 #define CONFIG_SYS_PCIE1_IO_PHYS        0xff8000000ull
 186 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
 187
 188 /* controller 2, Slot 2, tgtid 2, Base address 201000 */
 189 #define CONFIG_SYS_PCIE2_MEM_VIRT       0xa0000000
 190 #define CONFIG_SYS_PCIE2_MEM_BUS        0xe0000000
 191 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xc20000000ull
 192 #define CONFIG_SYS_PCIE2_MEM_SIZE       0x20000000      /* 512M */
 193 #define CONFIG_SYS_PCIE2_IO_VIRT        0xf8010000
 194 #define CONFIG_SYS_PCIE2_IO_BUS         0x00000000
 195 #define CONFIG_SYS_PCIE2_IO_PHYS        0xff8010000ull
 196 #define CONFIG_SYS_PCIE2_IO_SIZE        0x00010000      /* 64k */
 197
 198 /* controller 3, Slot 1, tgtid 1, Base address 202000 */
 199 #define CONFIG_SYS_PCIE3_MEM_VIRT       0xc0000000
 200 #define CONFIG_SYS_PCIE3_MEM_BUS        0xe0000000
 201 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc40000000ull
 202 #define CONFIG_SYS_PCIE3_MEM_SIZE       0x20000000      /* 512M */
 203 #define CONFIG_SYS_PCIE3_IO_VIRT        0xf8020000
 204 #define CONFIG_SYS_PCIE3_IO_BUS         0x00000000
 205 #define CONFIG_SYS_PCIE3_IO_PHYS        0xff8020000ull
 206 #define CONFIG_SYS_PCIE3_IO_SIZE        0x00010000      /* 64k */
 207
 208 /* controller 4, Base address 203000 */
 209 #define CONFIG_SYS_PCIE4_MEM_BUS        0xe0000000
 210 #define CONFIG_SYS_PCIE4_MEM_PHYS       0xc60000000ull
 211 #define CONFIG_SYS_PCIE4_MEM_SIZE       0x20000000      /* 512M */
 212 #define CONFIG_SYS_PCIE4_IO_BUS         0x00000000
 213 #define CONFIG_SYS_PCIE4_IO_PHYS        0xff8030000ull
 214 #define CONFIG_SYS_PCIE4_IO_SIZE        0x00010000      /* 64k */
 215
 216 #ifdef CONFIG_PCI
 217 #define CONFIG_PCI_INDIRECT_BRIDGE
 218 #define CONFIG_PCI_PNP                  /* do pci plug-and-play */
 219
 220 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 221 #define CONFIG_DOS_PARTITION
 222 #endif  /* CONFIG_PCI */
 223
 224 /* SATA */
 225 #ifdef CONFIG_FSL_SATA_V2
 226 #define CONFIG_LIBATA
 227 #define CONFIG_FSL_SATA
 228
 229 #define CONFIG_SYS_SATA_MAX_DEVICE      2
 230 #define CONFIG_SATA1
 231 #define CONFIG_SYS_SATA1                CONFIG_SYS_MPC85xx_SATA1_ADDR
 232 #define CONFIG_SYS_SATA1_FLAGS          FLAGS_DMA
 233 #define CONFIG_SATA2
 234 #define CONFIG_SYS_SATA2                CONFIG_SYS_MPC85xx_SATA2_ADDR
 235 #define CONFIG_SYS_SATA2_FLAGS          FLAGS_DMA
 236
 237 #define CONFIG_LBA48
 238 #define CONFIG_CMD_SATA
 239 #define CONFIG_DOS_PARTITION
 240 #endif
 241
 242 #ifdef CONFIG_FMAN_ENET
 243 #define CONFIG_MII              /* MII PHY management */
 244 #define CONFIG_ETHPRIME         "FM1@DTSEC1"
 245 #define CONFIG_PHY_GIGE         /* Include GbE speed/duplex detection */
 246 #endif
 247
 248 /*
 249  * Environment
 250  */
 251 #define CONFIG_LOADS_ECHO               /* echo on for serial download */
 252 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
 253
 254 /*
 255  * Command line configuration.
 256  */
 257 #define CONFIG_CMD_ERRATA
 258 #define CONFIG_CMD_IRQ
 259
 260 #ifdef CONFIG_PCI
 261 #define CONFIG_CMD_PCI
 262 #endif
 263
 264 /*
 265  * Miscellaneous configurable options
 266  */
 267 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 268 #define CONFIG_CMDLINE_EDITING                  /* Command-line editing */
 269 #define CONFIG_AUTO_COMPLETE                    /* add autocompletion support */
 270 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 271 #ifdef CONFIG_CMD_KGDB
 272 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O Buffer Size */
 273 #else
 274 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size */
 275 #endif
 276 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
 277 #define CONFIG_SYS_MAXARGS      16              /* max number of command args */
 278 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
 279
 280 /*
 281  * For booting Linux, the board info and command line data
 282  * have to be in the first 64 MB of memory, since this is
 283  * the maximum mapped by the Linux kernel during initialization.
 284  */
 285 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial map for Linux*/
 286 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 287
 288 #ifdef CONFIG_CMD_KGDB
 289 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 290 #endif
 291
 292 /*
 293  * Environment Configuration
 294  */
 295 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 296 #define CONFIG_BOOTFILE         "uImage"
 297 #define CONFIG_UBOOTPATH        "u-boot.bin"    /* U-Boot image on TFTP server*/
 298
 299 /* default location for tftp and bootm */
 300 #define CONFIG_LOADADDR         1000000
 301
 302 #define CONFIG_BAUDRATE 115200
 303
 304 #define CONFIG_HVBOOT                           \
 305  "setenv bootargs config-addr=0x60000000; "     \
 306  "bootm 0x01000000 - 0x00f00000"
 307
 308 #endif  /* __CONFIG_H */