include/configs/tam3517-common.h

   1 /*
   2  * Copyright (C) 2011
   3  * Stefano Babic, DENX Software Engineering, sbabic@denx.de.
   4  *
   5  * Copyright (C) 2009 TechNexion Ltd.
   6  *
   7  * SPDX-License-Identifier:     GPL-2.0+
   8  */
   9
  10 #ifndef __TAM3517_H
  11 #define __TAM3517_H
  12
  13 /*
  14  * High Level Configuration Options
  15  */
  16 #define CONFIG_OMAP             /* in a TI OMAP core */
  17 #define CONFIG_OMAP_GPIO
  18 #define CONFIG_OMAP_COMMON
  19 /* Common ARM Erratas */
  20 #define CONFIG_ARM_ERRATA_454179
  21 #define CONFIG_ARM_ERRATA_430973
  22 #define CONFIG_ARM_ERRATA_621766
  23
  24 #define CONFIG_SYS_TEXT_BASE 0x80008000
  25
  26 #define CONFIG_EMIF4    /* The chip has EMIF4 controller */
  27
  28 #include <asm/arch/cpu.h>               /* get chip and board defs */
  29 #include <asm/arch/omap.h>
  30
  31 /* Clock Defines */
  32 #define V_OSCK                  26000000        /* Clock output from T2 */
  33 #define V_SCLK                  (V_OSCK >> 1)
  34
  35 #define CONFIG_MISC_INIT_R
  36
  37 #define CONFIG_CMDLINE_TAG                      /* enable passing of ATAGs */
  38 #define CONFIG_SETUP_MEMORY_TAGS
  39 #define CONFIG_INITRD_TAG
  40 #define CONFIG_REVISION_TAG
  41
  42 /*
  43  * Size of malloc() pool
  44  */
  45 #define CONFIG_ENV_SIZE                 (128 << 10)     /* 128 KiB sector */
  46 #define CONFIG_SYS_MALLOC_LEN           (CONFIG_ENV_SIZE + (128 << 10) + \
  47                                         2 * 1024 * 1024)
  48 /*
  49  * DDR related
  50  */
  51 #define CONFIG_OMAP3_MICRON_DDR         /* Micron DDR */
  52 #define CONFIG_SYS_CS0_SIZE             (256 * 1024 * 1024)
  53
  54 /*
  55  * Hardware drivers
  56  */
  57
  58 /*
  59  * NS16550 Configuration
  60  */
  61 #define CONFIG_SYS_NS16550_SERIAL
  62 #define CONFIG_SYS_NS16550_REG_SIZE     (-4)
  63 #define CONFIG_SYS_NS16550_CLK          48000000        /* 48MHz (APLL96/2) */
  64
  65 /*
  66  * select serial console configuration
  67  */
  68 #define CONFIG_CONS_INDEX               1
  69 #define CONFIG_SYS_NS16550_COM1         OMAP34XX_UART1
  70 #define CONFIG_SERIAL1                  /* UART1 */
  71
  72 /* allow to overwrite serial and ethaddr */
  73 #define CONFIG_ENV_OVERWRITE
  74 #define CONFIG_BAUDRATE                 115200
  75 #define CONFIG_SYS_BAUDRATE_TABLE       {4800, 9600, 19200, 38400, 57600,\
  76                                         115200}
  77 #define CONFIG_MMC
  78 #define CONFIG_OMAP_HSMMC
  79 #define CONFIG_GENERIC_MMC
  80 #define CONFIG_DOS_PARTITION
  81
  82 /* EHCI */
  83 #define CONFIG_OMAP3_GPIO_5
  84 #define CONFIG_USB_EHCI
  85 #define CONFIG_USB_EHCI_OMAP
  86 #define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO        25
  87 #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
  88
  89 /* commands to include */
  90 #define CONFIG_CMD_NAND         /* NAND support                 */
  91 #define CONFIG_CMD_EEPROM
  92
  93 #define CONFIG_SYS_NO_FLASH
  94 #define CONFIG_SYS_I2C
  95 #define CONFIG_SYS_OMAP24_I2C_SPEED     400000
  96 #define CONFIG_SYS_OMAP24_I2C_SLAVE     1
  97 #define CONFIG_SYS_I2C_OMAP34XX
  98 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x50            /* base address */
  99 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  1               /* bytes of address */
 100 #define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW     0x07
 101
 102 /*
 103  * Board NAND Info.
 104  */
 105 #define CONFIG_SYS_NAND_BASE            NAND_BASE       /* physical address */
 106                                                         /* to access */
 107                                                         /* nand at CS0 */
 108
 109 #define CONFIG_SYS_MAX_NAND_DEVICE      1               /* Max number of */
 110                                                         /* NAND devices */
 111
 112 #define CONFIG_AUTO_COMPLETE
 113
 114 /*
 115  * Miscellaneous configurable options
 116  */
 117 #define CONFIG_SYS_LONGHELP             /* undef to save memory */
 118 #define CONFIG_CMDLINE_EDITING
 119 #define CONFIG_AUTO_COMPLETE
 120 #define CONFIG_SYS_CBSIZE               512     /* Console I/O Buffer Size */
 121
 122 /* Print Buffer Size */
 123 #define CONFIG_SYS_PBSIZE               (CONFIG_SYS_CBSIZE + \
 124                                         sizeof(CONFIG_SYS_PROMPT) + 16)
 125 #define CONFIG_SYS_MAXARGS              32      /* max number of command */
 126                                                 /* args */
 127 /* Boot Argument Buffer Size */
 128 #define CONFIG_SYS_BARGSIZE             (CONFIG_SYS_CBSIZE)
 129 /* memtest works on */
 130 #define CONFIG_SYS_MEMTEST_START        (OMAP34XX_SDRC_CS0)
 131 #define CONFIG_SYS_MEMTEST_END          (OMAP34XX_SDRC_CS0 + \
 132                                         0x01F00000) /* 31MB */
 133
 134 #define CONFIG_SYS_LOAD_ADDR            (OMAP34XX_SDRC_CS0) /* default load */
 135                                                                 /* address */
 136
 137 /*
 138  * AM3517 has 12 GP timers, they can be driven by the system clock
 139  * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK).
 140  * This rate is divided by a local divisor.
 141  */
 142 #define CONFIG_SYS_TIMERBASE            OMAP34XX_GPT2
 143 #define CONFIG_SYS_PTV                  2       /* Divisor: 2^(PTV+1) => 8 */
 144
 145 /*
 146  * Physical Memory Map
 147  */
 148 #define CONFIG_NR_DRAM_BANKS    2       /* CS1 may or may not be populated */
 149 #define PHYS_SDRAM_1            OMAP34XX_SDRC_CS0
 150 #define PHYS_SDRAM_2            OMAP34XX_SDRC_CS1
 151
 152 /*
 153  * FLASH and environment organization
 154  */
 155
 156 /* **** PISMO SUPPORT *** */
 157 #define CONFIG_NAND
 158 #define CONFIG_NAND_OMAP_GPMC
 159 #define CONFIG_ENV_IS_IN_NAND
 160 #define SMNAND_ENV_OFFSET               0x180000 /* environment starts here */
 161
 162 /* Redundant Environment */
 163 #define CONFIG_SYS_ENV_SECT_SIZE        (128 << 10)     /* 128 KiB */
 164 #define CONFIG_ENV_OFFSET               SMNAND_ENV_OFFSET
 165 #define CONFIG_ENV_ADDR                 SMNAND_ENV_OFFSET
 166 #define CONFIG_ENV_OFFSET_REDUND        (CONFIG_ENV_OFFSET + \
 167                                                 2 * CONFIG_SYS_ENV_SECT_SIZE)
 168 #define CONFIG_ENV_SIZE_REDUND          CONFIG_ENV_SIZE
 169
 170 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM_1
 171 #define CONFIG_SYS_INIT_RAM_ADDR        0x4020f800
 172 #define CONFIG_SYS_INIT_RAM_SIZE        0x800
 173 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_INIT_RAM_ADDR + \
 174                                          CONFIG_SYS_INIT_RAM_SIZE - \
 175                                          GENERATED_GBL_DATA_SIZE)
 176
 177 /*
 178  * ethernet support, EMAC
 179  *
 180  */
 181 #define CONFIG_DRIVER_TI_EMAC
 182 #define CONFIG_DRIVER_TI_EMAC_USE_RMII
 183 #define CONFIG_MII
 184 #define CONFIG_EMAC_MDIO_PHY_NUM        0
 185 #define CONFIG_BOOTP_DNS
 186 #define CONFIG_BOOTP_DNS2
 187 #define CONFIG_BOOTP_SEND_HOSTNAME
 188 #define CONFIG_NET_RETRY_COUNT 10
 189
 190 /* Defines for SPL */
 191 #define CONFIG_SPL_FRAMEWORK
 192 #define CONFIG_SPL_BOARD_INIT
 193 #define CONFIG_SPL_CONSOLE
 194 #define CONFIG_SPL_NAND_SIMPLE
 195 #define CONFIG_SPL_NAND_SOFTECC
 196 #define CONFIG_SPL_NAND_WORKSPACE       0x8f07f000 /* below BSS */
 197
 198 #define CONFIG_SPL_NAND_BASE
 199 #define CONFIG_SPL_NAND_DRIVERS
 200 #define CONFIG_SPL_NAND_ECC
 201 #define CONFIG_SPL_LDSCRIPT             "$(CPUDIR)/omap-common/u-boot-spl.lds"
 202
 203 #define CONFIG_SPL_TEXT_BASE            0x40200000 /*CONFIG_SYS_SRAM_START*/
 204 #define CONFIG_SPL_MAX_SIZE             (SRAM_SCRATCH_SPACE_ADDR - \
 205                                          CONFIG_SPL_TEXT_BASE)
 206 #define CONFIG_SPL_STACK                LOW_LEVEL_SRAM_STACK
 207
 208 #define CONFIG_SYS_SPL_MALLOC_START     0x8f000000
 209 #define CONFIG_SYS_SPL_MALLOC_SIZE      0x80000
 210 #define CONFIG_SPL_BSS_START_ADDR       0x8f080000 /* end of RAM */
 211 #define CONFIG_SPL_BSS_MAX_SIZE         0x80000
 212
 213 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */
 214 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION      1
 215 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME         "u-boot.img"
 216
 217 /* FAT */
 218 #define CONFIG_SPL_FS_LOAD_KERNEL_NAME          "uImage"
 219 #define CONFIG_SPL_FS_LOAD_ARGS_NAME            "args"
 220
 221 /* RAW SD card / eMMC */
 222 #define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR 0x900   /* address 0x120000 */
 223 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR   0x80    /* address 0x10000 */
 224 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS  0x80    /* 64KiB */
 225
 226 /* NAND boot config */
 227 #define CONFIG_SYS_NAND_BUSWIDTH_16BIT
 228 #define CONFIG_SYS_NAND_PAGE_COUNT      64
 229 #define CONFIG_SYS_NAND_PAGE_SIZE       2048
 230 #define CONFIG_SYS_NAND_OOBSIZE         64
 231 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128 * 1024)
 232 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 233 #define CONFIG_SYS_NAND_BAD_BLOCK_POS   0
 234 #define CONFIG_SYS_NAND_ECCPOS          {40, 41, 42, 43, 44, 45, 46, 47,\
 235                                          48, 49, 50, 51, 52, 53, 54, 55,\
 236                                          56, 57, 58, 59, 60, 61, 62, 63}
 237 #define CONFIG_SYS_NAND_ECCSIZE         256
 238 #define CONFIG_SYS_NAND_ECCBYTES        3
 239 #define CONFIG_NAND_OMAP_ECCSCHEME      OMAP_ECC_HAM1_CODE_SW
 240 #define CONFIG_NAND_OMAP_GPMC_PREFETCH
 241
 242 #define CONFIG_SYS_NAND_U_BOOT_START    CONFIG_SYS_TEXT_BASE
 243
 244 #define CONFIG_SYS_NAND_U_BOOT_OFFS     0x80000
 245 #define CONFIG_SYS_NAND_U_BOOT_SIZE     0x80000
 246
 247 #define CONFIG_CMD_UBIFS
 248 #define CONFIG_RBTREE
 249 #define CONFIG_LZO
 250 #define CONFIG_MTD_PARTITIONS
 251 #define CONFIG_MTD_DEVICE
 252 #define CONFIG_CMD_MTDPARTS
 253
 254 /* Setup MTD for NAND on the SOM */
 255 #define MTDIDS_DEFAULT          "nand0=omap2-nand.0"
 256 #define MTDPARTS_DEFAULT        "mtdparts=omap2-nand.0:512k(MLO)," \
 257                                 "1m(u-boot),256k(env1)," \
 258                                 "256k(env2),6m(kernel),-(rootfs)"
 259
 260 #define CONFIG_TAM3517_SETTINGS                                         \
 261         "netdev=eth0\0"                                                 \
 262         "nandargs=setenv bootargs root=${nandroot} "                    \
 263                 "rootfstype=${nandrootfstype}\0"                        \
 264         "nfsargs=setenv bootargs root=/dev/nfs rw "                     \
 265                 "nfsroot=${serverip}:${rootpath}\0"                     \
 266         "ramargs=setenv bootargs root=/dev/ram rw\0"                    \
 267         "addip_sta=setenv bootargs ${bootargs} "                        \
 268                 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"      \
 269                 ":${hostname}:${netdev}:off panic=1\0"                  \
 270         "addip_dyn=setenv bootargs ${bootargs} ip=dhcp\0"               \
 271         "addip=if test -n ${ipdyn};then run addip_dyn;"                 \
 272                 "else run addip_sta;fi\0"                               \
 273         "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0"              \
 274         "addtty=setenv bootargs ${bootargs}"                            \
 275                 " console=ttyO0,${baudrate}\0"                          \
 276         "addmisc=setenv bootargs ${bootargs} ${misc}\0"                 \
 277         "loadaddr=82000000\0"                                           \
 278         "kernel_addr_r=82000000\0"                                      \
 279         "hostname=" __stringify(CONFIG_HOSTNAME) "\0"                   \
 280         "bootfile=" __stringify(CONFIG_HOSTNAME) "/uImage\0"            \
 281         "flash_self=run ramargs addip addtty addmtd addmisc;"           \
 282                 "bootm ${kernel_addr} ${ramdisk_addr}\0"                \
 283         "flash_nfs=run nfsargs addip addtty addmtd addmisc;"            \
 284                 "bootm ${kernel_addr}\0"                                \
 285         "nandboot=run nandargs addip addtty addmtd addmisc;"            \
 286                 "nand read ${kernel_addr_r} kernel\0"                   \
 287                 "bootm ${kernel_addr_r}\0"                              \
 288         "net_nfs=tftp ${kernel_addr_r} ${bootfile}; "                   \
 289                 "run nfsargs addip addtty addmtd addmisc;"              \
 290                 "bootm ${kernel_addr_r}\0"                              \
 291         "net_self=if run net_self_load;then "                           \
 292                 "run ramargs addip addtty addmtd addmisc;"              \
 293                 "bootm ${kernel_addr_r} ${ramdisk_addr_r};"             \
 294                 "else echo Images not loades;fi\0"                      \
 295         "u-boot=" __stringify(CONFIG_HOSTNAME) "/u-boot.img\0"          \
 296         "load=tftp ${loadaddr} ${u-boot}\0"                             \
 297         "loadmlo=tftp ${loadaddr} ${mlo}\0"                             \
 298         "mlo=" __stringify(CONFIG_HOSTNAME) "/MLO\0"                    \
 299         "uboot_addr=0x80000\0"                                          \
 300         "update=nandecc sw;nand erase ${uboot_addr} 100000;"            \
 301                 "nand write ${loadaddr} ${uboot_addr} 80000\0"          \
 302         "updatemlo=nandecc hw;nand erase 0 20000;"                      \
 303                 "nand write ${loadaddr} 0 20000\0"                      \
 304         "upd=if run load;then echo Updating u-boot;if run update;"      \
 305                 "then echo U-Boot updated;"                             \
 306                         "else echo Error updating u-boot !;"            \
 307                         "echo Board without bootloader !!;"             \
 308                 "fi;"                                                   \
 309                 "else echo U-Boot not downloaded..exiting;fi\0"         \
 310
 311 /*
 312  * this is common code for all TAM3517 boards.
 313  * MAC address is stored from manufacturer in
 314  * I2C EEPROM
 315  */
 316 #if !(defined(__KERNEL_STRICT_NAMES) || defined(__ASSEMBLY__))
 317 /*
 318  * The I2C EEPROM on the TAM3517 contains
 319  * mac address and production data
 320  */
 321 struct tam3517_module_info {
 322         char customer[48];
 323         char product[48];
 324
 325         /*
 326          * bit 0~47  : sequence number
 327          * bit 48~55 : week of year, from 0.
 328          * bit 56~63 : year
 329          */
 330         unsigned long long sequence_number;
 331
 332         /*
 333          * bit 0~7   : revision fixed
 334          * bit 8~15  : revision major
 335          * bit 16~31 : TNxxx
 336          */
 337         unsigned int revision;
 338         unsigned char eth_addr[4][8];
 339         unsigned char _rev[100];
 340 };
 341
 342 #define TAM3517_READ_EEPROM(info, ret) \
 343 do {                                                            \
 344         i2c_init(CONFIG_SYS_OMAP24_I2C_SPEED, CONFIG_SYS_OMAP24_I2C_SLAVE); \
 345         if (eeprom_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0,          \
 346                 (void *)info, sizeof(*info)))                   \
 347                 ret = 1;                                        \
 348         else                                                    \
 349                 ret = 0;                                        \
 350 } while (0)
 351
 352 #define TAM3517_READ_MAC_FROM_EEPROM(info)                      \
 353 do {                                                            \
 354         char buf[80], ethname[20];                              \
 355         int i;                                                  \
 356         memset(buf, 0, sizeof(buf));                            \
 357         for (i = 0 ; i < ARRAY_SIZE((info)->eth_addr); i++) {   \
 358                 sprintf(buf, "%02X:%02X:%02X:%02X:%02X:%02X",   \
 359                         (info)->eth_addr[i][5],                 \
 360                         (info)->eth_addr[i][4],                 \
 361                         (info)->eth_addr[i][3],                 \
 362                         (info)->eth_addr[i][2],                 \
 363                         (info)->eth_addr[i][1],                 \
 364                         (info)->eth_addr[i][0]);                        \
 365                                                                 \
 366                 if (i)                                          \
 367                         sprintf(ethname, "eth%daddr", i);       \
 368                 else                                            \
 369                         strcpy(ethname, "ethaddr");             \
 370                 printf("Setting %s from EEPROM with %s\n", ethname, buf);\
 371                 setenv(ethname, buf);                           \
 372         }                                                       \
 373 } while (0)
 374
 375 /* The following macros are taken from Technexion's documentation */
 376 #define TAM3517_sequence_number(info) \
 377         ((info)->sequence_number % 0x1000000000000LL)
 378 #define TAM3517_week_of_year(info) (((info)->sequence_number >> 48) % 0x100)
 379 #define TAM3517_year(info) ((info)->sequence_number >> 56)
 380 #define TAM3517_revision_fixed(info) ((info)->revision % 0x100)
 381 #define TAM3517_revision_major(info) (((info)->revision >> 8) % 0x100)
 382 #define TAM3517_revision_tn(info) ((info)->revision >> 16)
 383
 384 #define TAM3517_PRINT_SOM_INFO(info)                            \
 385 do {                                                            \
 386         printf("Vendor:%s\n", (info)->customer);                \
 387         printf("SOM:   %s\n", (info)->product);                 \
 388         printf("SeqNr: %02llu%02llu%012llu\n",                  \
 389                 TAM3517_year(info),                             \
 390                 TAM3517_week_of_year(info),                     \
 391                 TAM3517_sequence_number(info));                 \
 392         printf("Rev:   TN%u %u.%u\n",                           \
 393                 TAM3517_revision_tn(info),                      \
 394                 TAM3517_revision_major(info),                   \
 395                 TAM3517_revision_fixed(info));                  \
 396 } while (0)
 397
 398 #endif
 399
 400 #endif /* __TAM3517_H */