include/configs/tao3530.h

   1 /*
   2  * Configuration settings for the TechNexion TAO-3530 SOM
   3  * equipped on Thunder baseboard.
   4  *
   5  * Edward Lin <linuxfae@technexion.com>
   6  * Tapani Utriainen <linuxfae@technexion.com>
   7  *
   8  * Copyright (C) 2013 Stefan Roese <sr@denx.de>
   9  *
  10  * SPDX-License-Identifier:     GPL-2.0+
  11  */
  12
  13 #ifndef __CONFIG_H
  14 #define __CONFIG_H
  15
  16 /*
  17  * High Level Configuration Options
  18  */
  19
  20 #define CONFIG_SDRC                     /* Has an SDRC controller */
  21
  22 #include <asm/arch/cpu.h>               /* get chip and board defs */
  23 #include <asm/arch/omap.h>
  24
  25 /* Clock Defines */
  26 #define V_OSCK                  26000000        /* Clock output from T2 */
  27 #define V_SCLK                  (V_OSCK >> 1)
  28
  29 #define CONFIG_MISC_INIT_R
  30
  31 #define CONFIG_CMDLINE_TAG
  32 #define CONFIG_SETUP_MEMORY_TAGS
  33 #define CONFIG_INITRD_TAG
  34 #define CONFIG_REVISION_TAG
  35
  36 /*
  37  * Size of malloc() pool
  38  */
  39 #define CONFIG_SYS_MALLOC_LEN           (4 << 20)
  40 #define CONFIG_ENV_SIZE                 (128 << 10)     /* 128 KiB sector */
  41
  42 /*
  43  * Hardware drivers
  44  */
  45
  46 /*
  47  * NS16550 Configuration
  48  */
  49 #define V_NS16550_CLK                   48000000        /* 48MHz (APLL96/2) */
  50
  51 #define CONFIG_SYS_NS16550_SERIAL
  52 #define CONFIG_SYS_NS16550_REG_SIZE     (-4)
  53 #define CONFIG_SYS_NS16550_CLK          V_NS16550_CLK
  54
  55 /*
  56  * select serial console configuration
  57  */
  58 #define CONFIG_CONS_INDEX               3
  59 #define CONFIG_SYS_NS16550_COM3         OMAP34XX_UART3
  60
  61 /* allow to overwrite serial and ethaddr */
  62 #define CONFIG_ENV_OVERWRITE
  63
  64 /* commands to include */
  65 #define CONFIG_MTD_DEVICE       /* needed for mtdparts commands */
  66 #define MTDIDS_DEFAULT                  "nand0=nand"
  67 #define MTDPARTS_DEFAULT                "mtdparts=nand:512k(x-loader),"\
  68                                         "1920k(u-boot),128k(u-boot-env),"\
  69                                         "4m(kernel),-(fs)"
  70
  71 #define CONFIG_SYS_I2C
  72 #define CONFIG_SYS_I2C_OMAP34XX
  73 #define CONFIG_SYS_OMAP24_I2C_SPEED     100000
  74 #define CONFIG_SYS_OMAP24_I2C_SLAVE     1
  75 #define CONFIG_I2C_MULTI_BUS
  76
  77 /*
  78  * TWL4030
  79  */
  80 #define CONFIG_TWL4030_LED
  81
  82 /*
  83  * Board NAND Info.
  84  */
  85 #define CONFIG_NAND_OMAP_GPMC
  86 #define CONFIG_SYS_NAND_ADDR            NAND_BASE       /* physical address */
  87                                                         /* to access nand */
  88 #define CONFIG_SYS_NAND_BASE            NAND_BASE       /* physical address */
  89                                                         /* to access nand at */
  90                                                         /* CS0 */
  91
  92 #define CONFIG_SYS_MAX_NAND_DEVICE      1               /* Max number of NAND */
  93                                                         /* devices */
  94 #define CONFIG_SYS_NAND_BUSWIDTH_16BIT
  95 /* Environment information */
  96
  97 #define CONFIG_EXTRA_ENV_SETTINGS \
  98         "loadaddr=0x82000000\0" \
  99         "console=ttyO2,115200n8\0" \
 100         "mpurate=600\0" \
 101         "dvi_mode=omapfb.mode=dvi:1280x720-24@60\0" \
 102         "tv_mode=omapfb.mode=tv:ntsc\0" \
 103         "video_mode=omapdss.def_disp=lcd vram=6M omapfb.vram=0:2M,1:2M,2:2M\0" \
 104         "lcd_mode=omapfb.mode=lcd:800x480@60 \0" \
 105         "extra_options= \0" \
 106         "mmcdev=0\0" \
 107         "mmcroot=/dev/mmcblk0p2 rw\0" \
 108         "mmcrootfstype=ext3 rootwait\0" \
 109         "nandroot=ubi0:rootfs ubi.mtd=4\0" \
 110         "nandrootfstype=ubifs\0" \
 111         "mmcargs=setenv bootargs console=${console} " \
 112                 "mpurate=${mpurate} " \
 113                 "${video_mode} " \
 114                 "root=${mmcroot} " \
 115                 "rootfstype=${mmcrootfstype} " \
 116                 "${extra_options}\0" \
 117         "nandargs=setenv bootargs console=${console} " \
 118                 "mpurate=${mpurate} " \
 119                 "${video_mode} " \
 120                 "${network_setting} " \
 121                 "root=${nandroot} " \
 122                 "rootfstype=${nandrootfstype} "\
 123                 "${extra_options}\0" \
 124         "loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \
 125         "bootscript=echo Running bootscript from mmc ...; " \
 126                 "source ${loadaddr}\0" \
 127         "loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \
 128         "mmcboot=echo Booting from mmc ...; " \
 129                 "run mmcargs; " \
 130                 "bootm ${loadaddr}\0" \
 131         "nandboot=echo Booting from nand ...; " \
 132                 "run nandargs; " \
 133                 "nand read ${loadaddr} 280000 400000; " \
 134                 "bootm ${loadaddr}\0" \
 135
 136 #define CONFIG_BOOTCOMMAND \
 137         "if mmc rescan ${mmcdev}; then " \
 138                 "if run loadbootscript; then " \
 139                         "run bootscript; " \
 140                 "else " \
 141                         "if run loaduimage; then " \
 142                                 "run mmcboot; " \
 143                         "else run nandboot; " \
 144                         "fi; " \
 145                 "fi; " \
 146         "else run nandboot; fi"
 147
 148 /*
 149  * Miscellaneous configurable options
 150  */
 151 #define CONFIG_SYS_LONGHELP             /* undef to save memory */
 152 #define CONFIG_SYS_CBSIZE               256     /* Console I/O Buffer Size */
 153
 154 /* turn on command-line edit/hist/auto */
 155 #define CONFIG_CMDLINE_EDITING
 156 #define CONFIG_AUTO_COMPLETE
 157
 158 /* Print Buffer Size */
 159 #define CONFIG_SYS_PBSIZE               (CONFIG_SYS_CBSIZE + \
 160                                         sizeof(CONFIG_SYS_PROMPT) + 16)
 161 #define CONFIG_SYS_MAXARGS              16      /* max number of command args */
 162 /* Boot Argument Buffer Size */
 163 #define CONFIG_SYS_BARGSIZE             (CONFIG_SYS_CBSIZE)
 164
 165 #define CONFIG_SYS_ALT_MEMTEST          1
 166 #define CONFIG_SYS_MEMTEST_START        (0x82000000)            /* memtest */
 167                                                                 /* defaults */
 168 #define CONFIG_SYS_MEMTEST_END          (0x83FFFFFF)            /* 64MB */
 169 #define CONFIG_SYS_MEMTEST_SCRATCH      (0x81000000)    /* dummy address */
 170
 171 #define CONFIG_SYS_LOAD_ADDR            (OMAP34XX_SDRC_CS0)     /* default */
 172                                                         /* load address */
 173 #define CONFIG_SYS_TEXT_BASE            0x80008000
 174
 175 /*
 176  * OMAP3 has 12 GP timers, they can be driven by the system clock
 177  * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK).
 178  * This rate is divided by a local divisor.
 179  */
 180 #define CONFIG_SYS_TIMERBASE            (OMAP34XX_GPT2)
 181 #define CONFIG_SYS_PTV                  2       /* Divisor: 2^(PTV+1) => 8 */
 182
 183 /*
 184  * Physical Memory Map
 185  */
 186 #define CONFIG_NR_DRAM_BANKS    2       /* CS1 may or may not be populated */
 187 #define PHYS_SDRAM_1            OMAP34XX_SDRC_CS0
 188 #define PHYS_SDRAM_1_SIZE       (32 << 20)      /* at least 32 MiB */
 189 #define PHYS_SDRAM_2            OMAP34XX_SDRC_CS1
 190
 191 /*
 192  * FLASH and environment organization
 193  */
 194
 195 /* **** PISMO SUPPORT *** */
 196 #define CONFIG_SYS_MONITOR_LEN          (256 << 10)     /* Reserve 2 sectors */
 197 #define CONFIG_SYS_FLASH_BASE           NAND_BASE
 198
 199 /* Monitor at start of flash */
 200 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_FLASH_BASE
 201 #define CONFIG_SYS_ONENAND_BASE         ONENAND_MAP
 202
 203 #define ONENAND_ENV_OFFSET              0x260000 /* environment starts here */
 204 #define SMNAND_ENV_OFFSET               0x260000 /* environment starts here */
 205
 206 #define CONFIG_SYS_ENV_SECT_SIZE        (128 << 10)
 207 #define CONFIG_ENV_OFFSET               SMNAND_ENV_OFFSET
 208 #define CONFIG_ENV_ADDR                 CONFIG_ENV_OFFSET
 209
 210 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM_1
 211 #define CONFIG_SYS_INIT_RAM_ADDR        0x4020f800
 212 #define CONFIG_SYS_INIT_RAM_SIZE        0x800
 213 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_INIT_RAM_ADDR + \
 214                                          CONFIG_SYS_INIT_RAM_SIZE - \
 215                                          GENERATED_GBL_DATA_SIZE)
 216
 217 #define CONFIG_OMAP3_SPI
 218
 219 /*
 220  * USB
 221  *
 222  * Currently only EHCI is enabled, the MUSB OTG controller
 223  * is not enabled.
 224  */
 225
 226 /* USB EHCI */
 227 #define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO        162
 228
 229 #define CONFIG_USB_HOST_ETHER
 230 #define CONFIG_USB_ETHER_SMSC95XX
 231
 232 #define CONFIG_USB_ETHER
 233 #define CONFIG_USB_ETHER_RNDIS
 234
 235 /* Defines for SPL */
 236 #define CONFIG_SPL_FRAMEWORK
 237 #define CONFIG_SPL_NAND_SIMPLE
 238
 239 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION      1
 240 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
 241
 242 #define CONFIG_SPL_NAND_BASE
 243 #define CONFIG_SPL_NAND_DRIVERS
 244 #define CONFIG_SPL_NAND_ECC
 245 #define CONFIG_SPL_OMAP3_ID_NAND
 246 #define CONFIG_SPL_LDSCRIPT             "arch/arm/mach-omap2/u-boot-spl.lds"
 247
 248 /* NAND boot config */
 249 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 250 #define CONFIG_SYS_NAND_PAGE_COUNT      64
 251 #define CONFIG_SYS_NAND_PAGE_SIZE       2048
 252 #define CONFIG_SYS_NAND_OOBSIZE         64
 253 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128 * 1024)
 254 #define CONFIG_SYS_NAND_BAD_BLOCK_POS   NAND_LARGE_BADBLOCK_POS
 255 /*
 256  * Use the ECC/OOB layout from omap_gpmc.h that matches your chip:
 257  * SP vs LP, 8bit vs 16bit: GPMC_NAND_HW_ECC_LAYOUT
 258  */
 259 #define CONFIG_SYS_NAND_ECCPOS          { 2, 3, 4, 5, 6, 7, 8, 9, \
 260                                          10, 11, 12, 13 }
 261 #define CONFIG_SYS_NAND_ECCSIZE         512
 262 #define CONFIG_SYS_NAND_ECCBYTES        3
 263 #define CONFIG_NAND_OMAP_ECCSCHEME      OMAP_ECC_HAM1_CODE_HW
 264
 265 #define CONFIG_SYS_NAND_U_BOOT_START    CONFIG_SYS_TEXT_BASE
 266 #define CONFIG_SYS_NAND_U_BOOT_OFFS     0x80000
 267
 268 #define CONFIG_SPL_TEXT_BASE            0x40200800
 269 #define CONFIG_SPL_MAX_SIZE             (SRAM_SCRATCH_SPACE_ADDR - \
 270                                          CONFIG_SPL_TEXT_BASE)
 271
 272 /*
 273  * Use 0x80008000 as TEXT_BASE here for compatibility reasons with the
 274  * older x-loader implementations. And move the BSS area so that it
 275  * doesn't overlap with TEXT_BASE.
 276  */
 277 #define CONFIG_SYS_TEXT_BASE            0x80008000
 278 #define CONFIG_SPL_BSS_START_ADDR       0x80100000
 279 #define CONFIG_SPL_BSS_MAX_SIZE         0x80000         /* 512 KB */
 280
 281 #define CONFIG_SYS_SPL_MALLOC_START     0x80208000
 282 #define CONFIG_SYS_SPL_MALLOC_SIZE      0x100000
 283
 284 #endif /* __CONFIG_H */