]> git.ipfire.org Git - people/ms/u-boot.git/blob - include/configs/tb100.h
tb100 - add Abilis TB100 board
[people/ms/u-boot.git] / include / configs / tb100.h
1 /*
2 * Copyright (C) 2011-2014 Pierrick Hascoet, Abilis Systems
3 *
4 * SPDX-License-Identifier: GPL-2.0+
5 */
6
7 #ifndef _CONFIG_TB100_H_
8 #define _CONFIG_TB100_H_
9
10 #include <linux/sizes.h>
11
12 /*
13 * CPU configuration
14 */
15 #define CONFIG_ARC700
16 #define CONFIG_ARC_MMU_VER 3
17 #define CONFIG_SYS_CACHELINE_SIZE 32
18 #define CONFIG_SYS_CLK_FREQ 500000000
19 #define CONFIG_SYS_TIMER_RATE CONFIG_SYS_CLK_FREQ
20
21 /*
22 * Board configuration
23 */
24 #define CONFIG_SYS_GENERIC_BOARD
25 #define CONFIG_ARCH_EARLY_INIT_R
26
27 /*
28 * Memory configuration
29 */
30 #define CONFIG_SYS_TEXT_BASE 0x84000000
31 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
32
33 #define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000
34 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE
35 #define CONFIG_SYS_SDRAM_SIZE SZ_128M
36
37 #define CONFIG_SYS_INIT_SP_ADDR \
38 (CONFIG_SYS_SDRAM_BASE + 0x1000 - GENERATED_GBL_DATA_SIZE)
39
40 #define CONFIG_SYS_MALLOC_LEN SZ_128K
41 #define CONFIG_SYS_BOOTM_LEN SZ_32M
42 #define CONFIG_SYS_LOAD_ADDR 0x82000000
43
44 #define CONFIG_SYS_NO_FLASH
45
46 /*
47 * UART configuration
48 */
49 #define CONFIG_CONS_INDEX 1
50 #define CONFIG_SYS_NS16550
51 #define CONFIG_SYS_NS16550_SERIAL
52 #define CONFIG_SYS_NS16550_REG_SIZE -4
53 #define CONFIG_SYS_NS16550_CLK 166666666
54 #define CONFIG_SYS_NS16550_COM1 0xFF100000
55 #define CONFIG_SYS_NS16550_MEM32
56
57 #define CONFIG_BAUDRATE 115200
58
59 /*
60 * Ethernet PHY configuration
61 */
62 #define CONFIG_PHYLIB
63 #define CONFIG_PHY_GIGE
64
65 /*
66 * Even though the board houses Realtek RTL8211E PHY
67 * corresponding PHY driver (drivers/net/phy/realtek.c) behaves unexpectedly.
68 * In particular "parse_status" reports link is down.
69 *
70 * Until Realtek PHY driver is fixed fall back to generic PHY driver
71 * which implements all required functionality and behaves much more stable.
72 *
73 * #define CONFIG_PHY_REALTEK
74 *
75 */
76
77 /*
78 * Ethernet configuration
79 */
80 #define CONFIG_DESIGNWARE_ETH
81 #define ETH0_BASE_ADDRESS 0xFE100000
82 #define ETH1_BASE_ADDRESS 0xFE110000
83
84 /*
85 * Command line configuration
86 */
87 #include <config_cmd_default.h>
88
89 #define CONFIG_CMD_DHCP
90 #define CONFIG_CMD_ELF
91 #define CONFIG_CMD_PING
92
93 #define CONFIG_OF_LIBFDT
94
95 #define CONFIG_AUTO_COMPLETE
96 #define CONFIG_SYS_MAXARGS 16
97
98 /*
99 * Environment settings
100 */
101 #define CONFIG_ENV_IS_NOWHERE
102 #define CONFIG_ENV_SIZE SZ_2K
103 #define CONFIG_ENV_OFFSET 0
104
105 /*
106 * Environment configuration
107 */
108 #define CONFIG_BOOTDELAY 3
109 #define CONFIG_BOOTFILE "uImage"
110 #define CONFIG_BOOTARGS "console=ttyS0,115200n8"
111 #define CONFIG_LOADADDR CONFIG_SYS_LOAD_ADDR
112
113 /*
114 * Console configuration
115 */
116 #define CONFIG_SYS_LONGHELP
117 #define CONFIG_SYS_PROMPT "[tb100]:~# "
118 #define CONFIG_SYS_CBSIZE 256
119 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
120 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
121 sizeof(CONFIG_SYS_PROMPT) + 16)
122
123 #endif /* _CONFIG_TB100_H_ */