]> git.ipfire.org Git - people/ms/u-boot.git/blob - include/configs/tb100.h
xtensa: clean up CONFIG_SYS_TEXT_ADDR
[people/ms/u-boot.git] / include / configs / tb100.h
1 /*
2 * Copyright (C) 2011-2014 Pierrick Hascoet, Abilis Systems
3 *
4 * SPDX-License-Identifier: GPL-2.0+
5 */
6
7 #ifndef _CONFIG_TB100_H_
8 #define _CONFIG_TB100_H_
9
10 #include <linux/sizes.h>
11
12 /*
13 * Memory configuration
14 */
15 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
16
17 #define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000
18 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE
19 #define CONFIG_SYS_SDRAM_SIZE SZ_128M
20
21 #define CONFIG_SYS_INIT_SP_ADDR \
22 (CONFIG_SYS_SDRAM_BASE + 0x1000 - GENERATED_GBL_DATA_SIZE)
23
24 #define CONFIG_SYS_MALLOC_LEN SZ_128K
25 #define CONFIG_SYS_BOOTM_LEN SZ_32M
26 #define CONFIG_SYS_LOAD_ADDR 0x82000000
27
28 /*
29 * UART configuration
30 */
31 #define CONFIG_SYS_NS16550_SERIAL
32 #define CONFIG_SYS_NS16550_CLK 166666666
33
34 /*
35 * Even though the board houses Realtek RTL8211E PHY
36 * corresponding PHY driver (drivers/net/phy/realtek.c) behaves unexpectedly.
37 * In particular "parse_status" reports link is down.
38 *
39 * Until Realtek PHY driver is fixed fall back to generic PHY driver
40 * which implements all required functionality and behaves much more stable.
41 *
42 * #define CONFIG_PHY_REALTEK
43 *
44 */
45
46 /*
47 * Ethernet configuration
48 */
49 #define ETH0_BASE_ADDRESS 0xFE100000
50 #define ETH1_BASE_ADDRESS 0xFE110000
51
52 /*
53 * Command line configuration
54 */
55
56 #define CONFIG_AUTO_COMPLETE
57 #define CONFIG_CMDLINE_EDITING
58
59 /*
60 * Environment settings
61 */
62 #define CONFIG_ENV_SIZE SZ_2K
63 #define CONFIG_ENV_OFFSET 0
64
65 /*
66 * Environment configuration
67 */
68 #define CONFIG_BOOTFILE "uImage"
69 #define CONFIG_LOADADDR CONFIG_SYS_LOAD_ADDR
70
71 /*
72 * Console configuration
73 */
74 #define CONFIG_SYS_LONGHELP
75
76 #endif /* _CONFIG_TB100_H_ */