include/configs/tbs2910.h

   1 /*
   2  * Copyright (C) 2014 Soeren Moch <smoch@web.de>
   3  *
   4  * Configuration settings for the TBS2910 MatrixARM board.
   5  *
   6  * SPDX-License-Identifier:     GPL-2.0+
   7  */
   8
   9 #ifndef __TBS2910_CONFIG_H
  10 #define __TBS2910_CONFIG_H
  11
  12 #include "mx6_common.h"
  13
  14 /* General configuration */
  15
  16 #define CONFIG_MACH_TYPE                3980
  17
  18 #define CONFIG_SYS_HZ                   1000
  19
  20 #define CONFIG_IMX_THERMAL
  21
  22 /* Physical Memory Map */
  23 #define CONFIG_NR_DRAM_BANKS            1
  24 #define CONFIG_SYS_SDRAM_BASE           MMDC0_ARB_BASE_ADDR
  25
  26 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
  27 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
  28 #define CONFIG_SYS_INIT_SP_OFFSET \
  29         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
  30 #define CONFIG_SYS_INIT_SP_ADDR \
  31         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
  32
  33 #define CONFIG_SYS_MALLOC_LEN           (128 * 1024 * 1024)
  34
  35 #define CONFIG_SYS_MEMTEST_START        CONFIG_SYS_SDRAM_BASE
  36 #define CONFIG_SYS_MEMTEST_END \
  37         (CONFIG_SYS_MEMTEST_START + 500 * 1024 * 1024)
  38
  39 #define CONFIG_SYS_BOOTMAPSZ            0x10000000
  40
  41 /* Serial console */
  42 #define CONFIG_MXC_UART
  43 #define CONFIG_MXC_UART_BASE            UART1_BASE /* select UART1/UART2 */
  44
  45 #define CONFIG_CONS_INDEX               1
  46
  47 /* Filesystems / image support */
  48
  49 /* MMC */
  50 #define CONFIG_SYS_FSL_USDHC_NUM        3
  51 #define CONFIG_SYS_FSL_ESDHC_ADDR       USDHC4_BASE_ADDR
  52 #define CONFIG_SUPPORT_EMMC_BOOT
  53
  54 /* Ethernet */
  55 #define CONFIG_FEC_MXC
  56 #define CONFIG_FEC_MXC
  57 #define CONFIG_MII
  58 #define IMX_FEC_BASE                    ENET_BASE_ADDR
  59 #define CONFIG_FEC_XCV_TYPE             RGMII
  60 #define CONFIG_ETHPRIME                 "FEC"
  61 #define CONFIG_FEC_MXC_PHYADDR          4
  62 #define CONFIG_PHYLIB
  63 #define CONFIG_PHY_ATHEROS
  64
  65 /* Framebuffer */
  66 #ifdef CONFIG_VIDEO
  67 #define CONFIG_VIDEO_IPUV3
  68 #define CONFIG_IPUV3_CLK                260000000
  69 #define CONFIG_VIDEO_BMP_RLE8
  70 #define CONFIG_IMX_HDMI
  71 #define CONFIG_IMX_VIDEO_SKIP
  72 #endif
  73
  74 /* PCI */
  75 #define CONFIG_CMD_PCI
  76 #ifdef CONFIG_CMD_PCI
  77 #define CONFIG_PCI_SCAN_SHOW
  78 #define CONFIG_PCIE_IMX
  79 #define CONFIG_PCIE_IMX_PERST_GPIO      IMX_GPIO_NR(7, 12)
  80 #endif
  81
  82 /* SATA */
  83 #define CONFIG_CMD_SATA
  84 #ifdef CONFIG_CMD_SATA
  85 #define CONFIG_DWC_AHSATA
  86 #define CONFIG_SYS_SATA_MAX_DEVICE      1
  87 #define CONFIG_DWC_AHSATA_PORT_ID       0
  88 #define CONFIG_DWC_AHSATA_BASE_ADDR     SATA_ARB_BASE_ADDR
  89 #define CONFIG_LBA48
  90 #define CONFIG_LIBATA
  91 #endif
  92
  93 /* USB */
  94 #ifdef CONFIG_CMD_USB
  95 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
  96 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
  97 #define CONFIG_MXC_USB_PORTSC           (PORT_PTS_UTMI | PORT_PTS_PTW)
  98 #ifdef CONFIG_CMD_USB_MASS_STORAGE
  99 #define CONFIG_USBD_HS
 100 #define CONFIG_USB_FUNCTION_MASS_STORAGE
 101 #endif /* CONFIG_CMD_USB_MASS_STORAGE */
 102 #ifdef CONFIG_USB_KEYBOARD
 103 #define CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE
 104 #define CONFIG_PREBOOT \
 105         "usb start; " \
 106         "if hdmidet; then " \
 107                 "run set_con_hdmi; " \
 108         "else " \
 109                 "run set_con_serial; " \
 110         "fi;"
 111 #endif /* CONFIG_USB_KEYBOARD */
 112 #endif /* CONFIG_CMD_USB      */
 113
 114 /* RTC */
 115 #ifdef CONFIG_CMD_DATE
 116 #define CONFIG_RTC_DS1307
 117 #define CONFIG_SYS_RTC_BUS_NUM          2
 118 #endif
 119
 120 /* I2C */
 121 #ifdef CONFIG_CMD_I2C
 122 #define CONFIG_SYS_I2C
 123 #define CONFIG_SYS_I2C_MXC
 124 #define CONFIG_SYS_I2C_MXC_I2C1         /* enable I2C bus 1 */
 125 #define CONFIG_SYS_I2C_MXC_I2C2         /* enable I2C bus 2 */
 126 #define CONFIG_SYS_I2C_MXC_I2C3         /* enable I2C bus 3 */
 127 #define CONFIG_SYS_I2C_SPEED            100000
 128 #define CONFIG_I2C_EDID
 129 #endif
 130
 131 /* Environment organization */
 132 #define CONFIG_ENV_IS_IN_MMC
 133 #define CONFIG_SYS_MMC_ENV_DEV          2 /* overwritten on SD boot */
 134 #define CONFIG_SYS_MMC_ENV_PART         1 /* overwritten on SD boot */
 135 #define CONFIG_ENV_SIZE                 (8 * 1024)
 136 #define CONFIG_ENV_OFFSET               (384 * 1024)
 137 #define CONFIG_ENV_OVERWRITE
 138
 139 #define CONFIG_EXTRA_ENV_SETTINGS \
 140         "bootargs_mmc1=console=ttymxc0,115200 di0_primary console=tty1\0" \
 141         "bootargs_mmc2=video=mxcfb0:dev=hdmi,1920x1080M@60 " \
 142                         "video=mxcfb1:off video=mxcfb2:off fbmem=28M\0" \
 143         "bootargs_mmc3=root=/dev/mmcblk0p1 rootwait consoleblank=0 quiet\0" \
 144         "bootargs_mmc=setenv bootargs ${bootargs_mmc1} ${bootargs_mmc2} " \
 145                         "${bootargs_mmc3}\0" \
 146         "bootargs_upd=setenv bootargs console=ttymxc0,115200 " \
 147                         "rdinit=/sbin/init enable_wait_mode=off\0" \
 148         "bootcmd_mmc=run bootargs_mmc; mmc dev 2; " \
 149                         "mmc read 0x10800000 0x800 0x4000; bootm 0x10800000\0" \
 150         "bootcmd_up1=load mmc 1 0x10800000 uImage\0" \
 151         "bootcmd_up2=load mmc 1 0x10d00000 uramdisk.img; " \
 152                         "run bootargs_upd; " \
 153                         "bootm 0x10800000 0x10d00000\0" \
 154         "console=ttymxc0\0" \
 155         "fan=gpio set 92\0" \
 156         "set_con_serial=setenv stdout serial; " \
 157                         "setenv stderr serial;\0" \
 158         "set_con_hdmi=setenv stdout serial,vga; " \
 159                         "setenv stderr serial,vga;\0" \
 160         "stderr=serial,vga;\0" \
 161         "stdin=serial,usbkbd;\0" \
 162         "stdout=serial,vga;\0"
 163
 164 #define CONFIG_BOOTCOMMAND \
 165         "mmc rescan; " \
 166         "if run bootcmd_up1; then " \
 167                 "run bootcmd_up2; " \
 168         "else " \
 169                 "run bootcmd_mmc; " \
 170         "fi"
 171
 172 #endif                         /* __TBS2910_CONFIG_H * */